Fluorocarbon-Functionalized Superhydrophobic Metal-Organic Framework: Enhanced CO2 Uptake via Photoinduced Postsynthetic Modification

Three Robust Isoreticular Metal-Organic Frameworks with High-Performance Selective CO2 Capture and Separation

Based on the hard-soft acid base (HSAB) theory, three robust isoreticular metal-organic frameworks (MOFs) with nia topology were successfully synthesized by solvothermal reaction {[In3O(BHB)(H2O)3]NO3·3DMA (JLU-MOF110(In)), [Fe3O(BHB)(H2O)3]NO3 (JLU-MOF110(Fe)), and [Fe2NiO(BHB)(H2O)3] (JLU-MOF110(FeNi)) (DMA = N,N-dimethylacetamide, H6BHB = 4,4″-benzene-1,3,5-triyl-hexabenzoic acid)}. Both JLU-MOF110(In) and JLU-MOF110(Fe) are cationic frameworks, and their BET surface areas are 301 and 446 m2/g, respectively. By modification of the components of metal clusters, JLU-MOF110(FeNi) features a neutral framework, and the BET surface area is increased up to 808 m2/g. All three MOF materials exhibit high chemical and thermal stability. JLU-MOF110(In) remains stable for 24 h at pH values ranging from 1 to 11, while JLU-MOF110(Fe) and JLU-MOF110(FeNi) persist to be stable for 24 h at pH from 1 to 12. JLU-MOF110(In) exhibits thermal stability up to 350 °C, whereas JLU-MOF110(Fe) and JLU-MOF(FeNi) can be stable up to 300 °C. Thanks to the microporous cage-based structure and abundant open metal sites, JLU-MOF110(In), JLU-MOF110(Fe), and JLU-MOF110(FeNi) have excellent CO2 capture capacity (28.0, 51.5, and 99.6 cm3/g, respectively, under 298 K and 1 bar). Interestingly, the ideal adsorption solution theory results show that all three MOFs exhibit high separation selectivity toward CO2 over N2 (35.2, 43.2, and 43.2 for CO2/N2 = 0.15/0.85) and CO2 over CH4 (14.4, 11.5, and 10.1 for CO2/CH4 = 0.5/0.5) at 298 K and 1 bar. Thus, all three MOFs are potential candidates for CO2 capture and separation. Among them, JLU-MOF110(FeNi) displays the best separation potential, as revealed by dynamic column breakthrough experiments.

Halogen Bond-Involving Self-Assembly of Iodonium Carboxylates: Adding a Dimension to Supramolecular Architecture

We designed 0D, 1D, and 2D supramolecular assemblies made of diaryliodonium salts (functioning as double σ-hole donors) and carboxylates (as σ-hole acceptors). The association was based on two charge-supported halogen bonds (XB), which occurred between IIII sites of the iodonium cations and the carboxylate anions. The sequential introduction of the carboxylic groups in the aryl ring of the benzoic acid added a dimension to the 0D supramolecular organization of the benzoate, which furnished 1D-chained and 2D-layered structures when terephthalate and trimesate anions, correspondingly, were applied as XB acceptors. The structure-directing XB were studied using DFT calculations under periodic boundary conditions and were followed by the one-electron-potential analysis and the Bader atoms-in-molecules topological analysis of electron density. These theoretical methods confirmed the existence of the XB and verified the philicities of the interaction partners in the designed solid-state structures.

Photoinduced movement: how photoirradiation induced the movements of matter

Pioneered by the success on active transport of ions across membranes in 1980 using the regulation of the binding properties of crown ethers with covalently linked photoisomerizable units, extensive studies on the movements by using varied interactions between moving objects and environments have been reported. Photoinduced movements of various objects ranging from molecules, polymers to microscopic particles were discussed from the aspects of the driving for the movements, materials design to achieve the movements and systems design to see and to utilize the movements are summarized in this review.

Fluorinated metal-organic frameworks for gas separation

Fluorinated metal-organic frameworks (F-MOFs) as fast-growing porous materials have revolutionized the field of gas separation due to their tunable pore apertures, appealing chemical features, and excellent stability. A deep understanding of their structure-performance relationships is critical for the synthesis and development of new F-MOFs. This critical review has focused on several strategies for the precise design and synthesis of new F-MOFs with structures tuned for specific gas separation purposes. First, the basic principles and concepts of F-MOFs as well as their structure, synthesis and modification and their structure to property relationships are studied. Then, applications of F-MOFs in adsorption and membrane gas separation are discussed. A detailed account of the design and capabilities of F-MOFs for the adsorption of various gases and the governing principles is provided. In addition, the exceptional characteristics of highly stable F-MOFs with engineered pore size and tuned structures are put into perspective to fabricate selective membranes for gas separation. Systematic analysis of the position of F-MOFs in gas separation revealed that F-MOFs are benchmark materials in most of the challenging gas separations. The outlook and future directions of the science and engineering of F-MOFs and their challenges are highlighted to tackle the issues of overcoming the trade-off between capacity/permeability and selectivity for a serious move towards industrialization.

Temperature-Dependent Superhydrophobic Functionalized Coordination Polymers (SFCPs) for Selective Adsorption of C2H4 over C2H6

We prepared two new superhydrophobic functionalized coordination polymers (SFCPs) [Zn₄(OH)₂(BTMB)₂(4,4'-Bipy)₂]_∞ ⊃ solvent, 1, and [Cd₄(OH)₂(BTMB)₂(4,4'-Bipy)₃]_∞ ⊃ solvent, 2, by solvothermal methods. For 1, the single-crystal XRD structure revealed that it contains two crystallographically distinct Zn²⁺ ions with two different types of coordination geometries of 4 and 6, exhibiting a unique superhydrophobic behavior with microporosity. Compound 1 exhibits superhydrophobicity with a contact angle of 155.5° (at 30 °C), which is stable even at high temperatures, whereas for the SFCP 2, all of the Cd²⁺ ions have only 6-coordination and exhibit a superhydrophobic character at room temperature with a contact angle of 156.7°(at 30 °C). However, surprisingly, this superhydrophobic character is stable only up to 60 °C, above which it is converted to hydrophilic nature, in contrast to the SFCP 1. Moreover, in this study, we also report a selective gas adsorption study of two C2 gases with similar kinetic diameters (∼3.9 Å) of ethylene over ethane.

Two-Dimensional Metal-Organic Framework with Ultrahigh Water Stability for Separation of Acetylene from Carbon Dioxide and Ethylene

Highly selective separation and purification of acetylene (C2H2) from ethylene (C2H4) and carbon dioxide (CO2) are daunting challenges in light of their similar molecule sizes and physical properties. Herein, we report a two-dimensional (2D) stable metal-organic framework (MOF), NUM-11 ([Cu(Hmpba)2]·1.5DMF) (H2mpba = 4-(3,5-dimethyl-1H-pyrazol-4-yl)benzoic acid), with sql topology, stacked together through π-π interactions for efficient separation of C2H2 from C2H4 and CO2. The 2D-MOF material offers high hydrolytic stability and good purification capacity; especially, it could survive in water for 7 months, even longer. This stable MOF selectively captures C2H2 from mixtures containing C2H4 and CO2, as determined by adsorption isotherms. The ideal adsorbed solution theory selectivity calculations and transient breakthrough experiments were performed to verify the separation capacity. The low isosteric heat of NUM-11a (desolvated NUM-11) (18.24 kJ mol-1 for C2H2) validates the feasibility of adsorbent regeneration with low energy footprint consumption. Furthermore, Grand Canonical Monte Carlo simulations confirmed that the pore surface of the NUM-11 framework enabled preferential binding of C2H2 over C2H4 and CO2 via multiple C-H···O, C-H···π, and C-H···C interactions. This work provides some insights to prepare stable MOF materials toward the purification of C2H2, and the water-stable structure, low isosteric heat, and good cycling stability of NUM-11 make it very promising for practical industrial application.

Hydrophobicity and dielectric properties across an isostructural family of MOFs: a duet or a duel?

Impedance spectroscopy measurements are combined with surface and pore hydrophobicity signatures to offer a new protocol for examining hydrophobic solids.

Investigation on the catalytic behavior of a novel thulium-organic framework with a planar tetranuclear {Tm4} cluster as the active center for chemical CO2 fixation

Herein, the exquisite combination of coplanar [Tm₄(CO₂)₁₀(μ₃-OH)₂(μ₂-HCO₂)(OH₂)₂] clusters ({Tm₄}) and structure-oriented functional BDCP^5- leads to the highly robust nanoporous {Tm₄}-organic framework {(Me₂NH₂)[Tm₄(BDCP)₂(μ₃-OH)₂(μ₂-HCO₂)(H₂O)₂]·7DMF·5H₂O}_n (NUC-37, H₅BDCP = 2,6-bis(2,4-dicarboxylphenyl)-4-(4-carboxylphenyl)pyridine). To the best of our knowledge, NUC-37 is the first anionic {Ln₄}-based three-dimensional framework with embedded hierarchical microporous and nanoporous channels, among which each larger one is shaped by six rows of coplanar {Tm₄} clusters and characterized by plentiful coexisting Lewis acid-base sites on the inner wall including open Tm^III sites, N_pyridine atoms, μ₃-OH and μ₂-HCO₂. Catalytic experimental studies exhibit that NUC-37 possesses highly selective catalytic activity on the cycloaddition of epoxides with CO₂ as well as high recyclability under gentle conditions, which should be ascribed to its nanoscale channels, rich bifunctional active sites, and stable physicochemical properties. This work offers an effective means for synthesizing productive cluster-based Ln-MOF catalysts by employing structure-oriented ligands and controlling the solvothermal reaction conditions.

A new metal-organic framework based on rare [Zn4F4] cores for efficient separation of C2H2

Assembly via 1,4-benzenedicarboxylate linkers and Zn²⁺ ions afforded an MOF containing rare [Zn₄F₄] cubane core, showing excellent separation for C₂H₂-CO₂ and C₂H₂-CH₄ mixtures. Dynamic breakthrough experiments and grand canonical Monte Carlo calculations were carried out to confirm the feasibility of the MOF for the separation application of C₂H₂.

An AIE material with time-dependent luminescence conversion obtained by 2D coordination polymer modification via covalent post-synthetic modification

In this study, we reported the covalent post-synthetic modification (PSM) of a luminescent complex to achieve aggregation-induced emission (AIE), prepared using the Schiff base reaction of TPE-CHO and HLC-NH2, denoted by HLC-NH2-TPE. HLC-NH2 formed a 2D luminescent complex which was constructed using 4,4'-diamino-[1,1'-biphenyl]-2,2'-dicarboxylic acid and zinc ions via a solvothermal reaction. HLC-NH2-TPE inherited the luminescence properties of HLC-NH2 and exhibited noticeable AIE properties in response to environmental viscosities and temperature changes. Interestingly, HLC-NH2-TPE displayed a time-dependent luminescence conversion phenomenon in a mixed solution of DMF/H₂O (v : v/1 : 9).

Rational Construction of a Responsive Azo-Functionalized Porous Organic Framework for CO2 Sorption

An azo-functionalized porous organic framework (denoted as JJU-1) was synthesized via FeCl3-promoted oxidative coupling polymerization. By virtue of a porous skeleton and a light/heat responsive azo functional group, this task-specific JJU-1 displays a reversible stimuli-responsive adsorption property triggered by UV irradiation and heat treatment. The initial Brunauer-Emmet-Teller (BET) surface area of this porous material is 467 m2 g-1. The CO2 sorption isotherms exhibit a slight decrease after UV irradiation because of the trans to cis conversion of the azo functional skeleton. It is worth mentioning that the responsive CO2 adsorption performance can be recycled for three cycles via alternating external stimuli, confirming the excellently reversible switchability of trans-to-cis isomerization and controllable CO2 adsorption.