Electrospun Fe-Incorporated ZIF-67 Nanofibers for Effective Electrocatalytic Water Splitting

Rational Construction of a 3D Self-Supported Electrode Based on ZIF-67 and Amorphous NiCoP for an Enhanced Oxygen Evolution Reaction

The development of efficient and Earth-abundant electrocatalysts for the oxygen evolution reaction (OER) is an urgent requirement in the field of electrochemical water splitting. The electrocatalytic performance of the OER can be greatly enhanced by the synergistic combination of zeolite imidazolate frameworks (ZIFs) and transition-metal phosphides, both of which individually exhibit promising capabilities in this regard. In this study, a novel amorphous NiCoP deposited on ZIF-67 sheets supported on Ni foam (labeled as NiCoP/ZIF-67/NF) as an OER electrocatalytic material was successfully synthesized using a simple, secure, and time-efficient two-step strategy. The experimental results demonstrate that NiCoP/ZIF-67/NF possesses a large active surface area with abundant active sites. Also, the synergistic effect and interaction between NiCoP and ZIF-67, as well as between Ni and Co within NiCoP, effectively enhance its electrochemical performance under alkaline conditions. Consequently, NiCoP/ZIF-67/NF exhibits outstanding catalytic activity for OER with an overpotential (η) of 175 mV at a current density of 10 mA cm-2 and a long-term stability over 40 h at 20 mA cm-2 in a 1.0 M KOH electrolyte. The corresponding analyses suggest that the real active sites responsible for the OER are identified as NiOOH and CoOOH species within the structure of NiCoP/ZIF-67/NF. Additionally, the catalytic function and stability of ZIF-67 toward the OER under alkaline conditions were also briefly discussed. This work provides a novel catalytic material for the OER along with a facile strategy to fabricate superior, efficient, and noble metal-free catalysts suitable for energy-related applications.

In Situ-Generated Hollow CoFe-LDH/Co-MOF Heterostructure Nanorod Arrays for Oxygen Evolution Reaction

Assembling a heterostructure is an effective strategy for enhancing the electrocatalytic activity of hybrid materials. Herein, CoFe-layered double hydroxide and Co-metal-organic framework (CoFe-LDH/Co-MOF) hollow heterostructure nanorod arrays are synthesized. First, [Co(DIPL)(H3BTC)(H2O)2]n [named as Co-MOF, DIPL = 2,6-di(pyrid-4-yl)-4-phenylpyridine, H3BTC = 1,3,5-benzenetricarboxylic acid] crystalline materials with a uniform hollow structure were prepared on the nickel foam. The CoFe-LDH/Co-MOF composite perfectly inherits the original hollow nanorod array morphology after the subsequent electrodeposition process. Optimized CoFe-LDH/Co-MOF hollow heterostructure nanorod arrays display excellent performance in oxygen evolution reaction (OER) with ultralow overpotentials of 215 mV to deliver current densities of 10 mA cm-2 and maintain the electrocatalytic activity for a duration as long as 220 h, ranking it one of the non-noble metal-based electrocatalysts for OER. Density functional theory calculations validate the reduction in free energy for the rate-determining step by the synergistic effect of Co-MOF and CoFe-LDH, with the increased charge density and noticeable electron transfer at the Co-O site, which highlights the capability of Co-MOF to finely adjust the electronic structure and facilitate the creation of active sites. This work establishes an experimental and theoretical basis for promoting efficient water splitting through the design of heterostructures in catalysts.

Dopant-Induced Charge Redistribution on the 3D Sponge-like Hierarchical Structure of Quaternary Metal Phosphides Nanosheet Arrays Derived from Metal-Organic Frameworks for Natural Seawater Splitting

Dopant-induced electron redistribution on transition metal-based materials has long been considered an emerging new electrocatalyst that is expected to replace noble-metal-based electrocatalysts in natural seawater electrolysis; however, their practical applications remain extremely daunting due to their sluggish kinetics in natural seawater. In this work, we developed a facile strategy to synthesize the 3D sponge-like hierarchical structure of Ru-doped NiCoFeP nanosheet arrays derived from metal-organic frameworks with remarkable hydrogen evolution reaction (HER) performance in natural seawater. Based on experimental results and density functional theory calculations, Ru-doping-induced charge redistribution on the surface of metal active sites has been found, which can significantly enhance the HER activity. As a result, the 3D sponge-like hierarchical structure of Ru-NiCoFeP nanosheet arrays achieves low overpotentials of 52, 149, and 216 mV at 10, 100, and 500 mA cm-2 in freshwater alkaline, respectively. Notably, the electrocatalytic activity of the Ru-NiCoFeP electrocatalyst in simulated alkaline seawater and natural alkaline seawater is nearly the same as that in freshwater alkaline. This electrocatalyst exhibits superior catalytic properties with outstanding stability under a high current density of 85 mA cm-2 for more than 100 h in natural seawater, which outperforms state-of-the-art 20% Pt/C at high current density. Our work provides valuable guidelines for developing a low-cost and high-efficiency electrocatalyst for natural seawater splitting.

In situ growth of a redox-active metal-organic framework on electrospun carbon nanofibers as a free-standing electrode for flexible energy storage devices

The rational construction of free-standing and flexible electrodes for application in electrochemical energy storage devices and next-generation supercapacitors is an emerging research focus. Herein, we prepared a redox-active ferrocene dicarboxylic acid (Fc)-based nickel metal-organic framework (MOF) on electrospun carbon nanofibers (NiFc-MOF@CNFs) via an in situ approach. This in situ approach avoided the aggregation of the MOF. The NiFc-MOF@CNF flexible electrode showed a high redox-active behavior owing to the presence of ferrocene and flexible carbon nanofibers, which led to unique properties, including high flexibility and lightweight. Furthermore, the prepared electrode was utilized in a supercapacitors (SC) without the use of any binder, which achieved a specific capacity of 460 C g-1 at 1 A g-1 with an excellent cyclic retention of 82.2% after 25 000 cycles and a good rate capability. A flexible asymmetric supercapacitor device was assembled, which delivered a high energy density of 56.25 W h kg-1 and a long-lasting cycling performance. Also, the prepared electrode could be used as a freestanding electrode in flexible devices at different bending angles. The obtained cyclic voltammetry curves showed negligible changes, indicating the high stability and good flexibility of the electrode. Thus, the use of the in situ strategy can lead to the uniform growth of redox-active MOFs or other porous materials on CNFs.

Semicrystalline IrOx with Abundant Boundaries for Overall Water Splitting

Inorganic compounds with different crystalline and amorphous states may show distinct properties in catalytic applications. In this work, we control the crystallization level by fine thermal treatment and synthesize a semicrystalline IrO_x material with the formation of abundant boundaries. Theoretical calculation reveals that the interfacial iridium with a high degree of unsaturation is highly active for the hydrogen evolution reaction compared to individual counterparts based on the optimal binding energy with hydrogen (H*). At the heat treatment temperature of 500 °C, the obtained IrO_x-500 catalyst has dramatically promoted hydrogen evolution kinetics, endowing the iridium catalyst with a bifunctional activity for acidic overall water splitting with a total voltage of only 1.554 V at a current density of 10 mA cm^-2. In light of the remarkable boundary-enhanced catalysis effects, the semicrystalline material should be further developed for other applications.

Materials Research Directions Toward a Green Hydrogen Economy: A Review

A constellation of technologies has been researched with an eye toward enabling a hydrogen economy. Within the research fields of hydrogen production, storage, and utilization in fuel cells, various classes of materials have been developed that target higher efficiencies and utility. This Review examines recent progress in these research fields from the years 2011-2021, exploring the most commonly occurring concepts and the materials directions important to each field. Particular attention has been given to catalyst materials that enable the green production of hydrogen from water, chemical and physical storage systems, and materials used in technical capacities within fuel cells. The quantification of publication and materials trends provides a picture of the current state of development within each node of the hydrogen economy.

ZIF-67-derived nanoframes as efficient bifunctional catalysts for overall water splitting in alkaline medium

In order to lower energy consumption it is critical to develop highly efficient and stable non-precious metal bifunctional catalysts. In this study, we found that rational design of novel nanostructures is able to increase the number of active sites, conductivity and accelerate electron transfer, thus promoting enhanced performance of the catalyst. We successfully synthesized carbon nanotubes (CNTs) containing a hollow polyhedral (CNTHPs) structure through annealing, etching and phosphating. The unique hollow shape not only provides a stable structure but also facilitates mass and charge transfer. Thus, CoP/CNTHPs can catalyze the hydrogen and oxygen evolution reactions effectively with overpotentials of 147 and 238 mV at 10 mA cm^-2. Simultaneously, CoP/CNTHPs only needs a voltage of 1.54 V to attain a current density of 10 mA cm^-2 in the electrocatalytic water splitting process, demonstrating its bifunctional activity. Furthermore, the electrolytic catalytic performance does not weaken significantly after 12 hours of electrolysis, demonstrating excellent stability. Overall, this research offers useful insights into rational design of high-performance non-noble metal catalysts.

Coordination compound-derived La-doped FeS2/N-doped carbon (NC) as an efficient electrocatalyst for oxygen evolution reaction

By annealing/sulfuring of coordination compound (CC) precursors, [LaxFe1-x(H2O)8Fe(CN)6]·2hmt (x = 0, 0.33 and 0.5) (hmt = hexamethylenetetramine), it was synthesized FeS2/N-doped carbon (NC), La-doped FeS2/NC-0.33 and La-doped FeS2/NC-0.5. All of...

Fe-Triazole coordination compound-derived Fe2O3 nanoparticles anchored on Fe-MOF/N-doped carbon nanosheets for efficient electrocatalytic oxygen evolution reaction

Using FeCl₃·6H₂O and 1,2,4-triazole (Htrz) as starting materials, an Fe coordination compound (CC), [FeCl₃(Htrz)₃]·H₂O, was synthesized at room temperature. Fe-CC can be partially transformed into an Fe metal-organic framework (MOF), [FeCl₂(Htrz)], via low-temperature annealing. After sulfurization at 250, 300, and 400 °C, S-doped Fe₂O₃/N-doped carbon (denoted as NC)/Fe-MOF, FeS₂/NC/Fe-MOF, and FeS₂/NC were obtained, respectively. S-doped Fe₂O₃/NC/Fe-MOF shows the best oxygen evolution reaction (OER) catalytic activity in 1 M KOH solution, with overpotentials (η) of 185, 232, and 258 mV required to reach current densities of 10, 30, and 50 mA cm^-2, respectively, outperforming commercial RuO₂ and most transition-metal oxides reported to date; this high performance is associated with the Fe₂O₃ nanoparticles (NPs) anchored on the Fe-MOF/NC nanosheets. The Fe-MOF/NC matrix can act as a support to prevent the agglomeration of Fe₂O₃ NPs. In addition, S-doped Fe₂O₃/NC/Fe-MOF exhibits long-term OER activity at 20 mA cm^-2, which is related to the partial transformation of Fe₂O₃/Fe-MOF into FeOOH. In addition, density functional theory (DFT) calculations show that the rate-determining step of the OER process at the Fe sites of both Fe₂O₃ and FeS₂ is the formation of Fe*-OH, and the Fe₂O₃ sites display a lower Gibbs free energy (ΔG_max) of 1.674 eV and a smaller η value of ∼0.444 V. Bader charge, differential charge density mapping, and density of states (DOS) analysis all reveal more charge accumulation at the Fe sites of FeS₂ than at the Fe sites of Fe₂O₃, which is due to the lower electronegativity of S than of O. As a result, the Fe sites of FeS₂ show weaker affinity for -OH intermediates, giving rise to inferior OER performance compared with Fe₂O₃.

Facile and scalable preparation of ZIF-67 decorated cotton fibers as recoverable and efficient adsorbents for removal of malachite green

Recently, metal–organic frameworks (MOFs) have received considerable attention as highly efficient adsorbents for dye wastewater remediation. However, the immobilization of MOFs on the substrate surfaces to fabricate easy recyclable adsorbents via a facile route is still a challenge. In this work, ZIF-67/cotton fibers as adsorbents for dye removal were prepared in a large-scale using a simple coordination replication method. The successful fabrication of the ZIF-67/cotton fibers was confirmed by FTIR, XRD, XPS, SEM and BET analysis, respectively. As expected, the as-prepared ZIF-67/cotton fibers exhibited high adsorption capacity of 3787 mg/g towards malachite green (MG). Meanwhile, the adsorption kinetics and isotherm obeyed the pseudo-second-order kinetics and Langmuir model, respectively. Moreover, its removal efficiency towards MG was not significantly influenced by the pH and ionic strength of aqueous solution. Most importantly, the ZIF-67/cotton fibers can remove MG from synthetic effluents, and it can be easily regenerated without filtration or centrifugation processes, with the regeneration efficiency remaining over 90% even after 10 cycles. Additionally, the ZIF-67/cotton fibers presented excellent antimicrobial performance against E. coli and S. aureus. Hence, the distinctive features of the as-prepared ZIF-67/cotton fibers make it promisingly applicable for the colored wastewater treatment.

Metallic Gold-Incorporated Ni(OH)2 for Enhanced Water Oxidation in an Alkaline Medium: A Simple Wet-Chemical Approach

The development of a highly efficient electrocatalyst for the oxygen evolution reaction (OER) with a lower overpotential and high intrinsic activity is highly challenging owing to its sluggish kinetic behavior. As an alternative to the state-of-the-art OER catalyst, recently, transition-metal-based hydroxide materials have been shown to play important roles for the same. Owing to the high earth abundance of various Ni-based hydroxide and its derivatives, these are known to be highly studied materials for the OER. Herein, we report a simple wet-chemical synthesis of metallic gold-incorporated (by varying the concentration of Au³⁺ ions) Ni(OH)₂ nanosheets as an active and stable electrocatalyst for the OER in 1 M KOH medium. The Au-Ni(OH)₂ (2) catalyst demanded a low overpotential of 288 mV to attain a geometric current density of 10 mA/cm² with a lower Tafel value of 55 mV/dec compared to bare Ni(OH)₂ with a lower mass loading of only 0.1 mg/cm². Tafel slope analysis reveals that the incorporation of metallic gold on the hydroxide surfaces could alter the mechanistic pathways of the overall OER reaction. It has been proposed that the incorporation of metallic gold over the Ni(OH)₂ surfaces led to a change in the electronic structure of the electroactive nickel sites (Jahn-Teller distortion), which favors the OER by electronic aspects.

Cobalt-iron zeolitic imidazolate frameworks (ZIFs) as microfibers for the effective detection of hydroquinone

The monitoring of pollutants has received significant attention from researchers in recent years owing to their hazardous nature and their toxic effect on the environment. Among them, water pollution plays a major role and results in dominant diseases along with life-long health problems. Hydroquinone (HQ), the major metabolite of benzene, is an industrially used organic compound which causes symptoms associated with nervous related disorders, such as faintness, therefore the research community has been inspired to detect sources of this carcinogenic agent. In this work, cobalt-iron based zeolitic imidazolate framework microfibers (CoFe-ZIF-MFs) were used for the selective detection of HQ. Micro-structured CoFe-ZIF fibers were fabricated using the wet chemical and electrospinning method. The electrochemical response of the prepared composite revealed an excellent redox behavior towards HQ and does not suffer from interference resulting from other analytes. The proposed sensor exhibited a wide linear range of 1 μM-1 mM with a detection limit of 230 nM, resulting in a good stability of up to 88%, even after 250 cycles. The designed sensor showed an exquisite performance for real sample analysis which indicates the device mechanism is reliable for use in environmental monitoring, public health care, industrialized areas and waste water management systems.

Self-driven Ru-modified NiFe MOF nanosheet as multifunctional electrocatalyst for boosting water and urea electrolysis

Urea electro-oxidation reaction (UOR) has been a promising strategy to replace oxygen evolution reaction (OER) by urea-mediated water splitting for hydrogen production. Naturally, rational design of high-efficiency and multifunctional electrocatalyst towards UOR and hydrogen evolution reaction (HER) is of vital significance, but still a grand challenge. Herein, an innovative 3D Ru-modified NiFe metal-organic framework (MOF) nanoflake array on Ni foam (Ru-NiFe-x/NF) was elaborately designed via spontaneous galvanic replacement reaction (GRR). Notably, the adsorption capability of intermediate species (H*) of catalyst is significantly optimized by Ru modification. Meanwhile, rich high-valence Ni active species can be acquired by self-driven electronic reconstruction in the interface, then dramatically accelerating the electrolysis of water and urea. Remarkably, the optimized Ru-NiFe-③/NF (1.6 at% of Ru) only requires the overpotential of 90 and 310 mV to attain 100 mA cm^-2 toward HER and OER in alkaline electrolyte, respectively. Impressively, an ultralow voltage of 1.47 V is required for Ru-NiFe-③/NF to deliver a current density of 100 mA cm^-2 in urea-assisted electrolysis cell with superior stability, which is 190 mV lower than that of Pt/C-NF||RuO₂/NF couple. This work is desired to explore a facile way to exploit environmentally-friendly energy by coupling hydrogen evolution with urea-rich sewage disposal.

Temperature-Controlled Structural Variations of Meticulous Fibrous Networks of NiFe-Polymeric Zeolite Imidazolate Frameworks for Enhanced Performance in Electrocatalytic Water-Splitting Reactions

Developing non-noble, earth-ample, and stable electrocatalysts are highly anticipated in oxygen-evolution reaction (OER) and hydrogen-evolution reaction (HER) at unique pH conditions. Herein, we have synthesized bimetallic (nickel and iron) zeolite imidazolate framework (ZIF)-based nanofibrous materials via a simple electrospinning (ES) process. The structural stability of the fibrous material is subjected to various calcination conditions. We have elaborated the structural importance of the one-dimensional (1D) fibrous materials in electrocatalytic water-splitting reactions. As a result, NiFe-ZIF-NFs (Nanofibers)-RT (Room Temperature) have delivered a small overpotential of 241 mV at 10 mA cm^-2 current density in OER and 290 mV at a fixed current density of 50 mA cm^-2 in HER at two different pH conditions with 1 M KOH and 0.5 M H₂SO₄, respectively. Furthermore, it exposes the actual surface area of 27.270 m² g^-1 and a high electrochemical active surface area (ECSA) of 50 μF in OER and 55 μF in HER, which is responsible for the electrochemical performance with better stability. This exceptional activity of the materials is mainly attributed to the structural dependency of the fibrous network through the polymeric architecture.

Electrospun Cobalt-Incorporated MOF-5 Microfibers as a Promising Electrocatalyst for OER in Alkaline Media

Metal-organic framework (MOF)-based materials have attracted attention in recent times owing to their remarkable properties such as regulatable pore size, high specific surface area, and elasticity in their network topology, geometry, dimension, and chemical functionality. It is believed that the incorporation of a MOF network into a fibrous matrix results in the improvement of the electrocatalytic properties of the material. Herein, we have synthesized a Co-incorporated MOF-5-based fibrous material by a simple wet-chemical method, followed by an electrospinning (ES) process. The as-prepared Co-incorporated MOF-5 microfibers were employed as an electrocatalyst for the oxygen evolution reaction (OER) in 1 M KOH electrolyte. The catalyst demands a lower overpotential of 240 mV to attain a current density of 10 mA/cm² with a lower Tafel slope value of 120 mV/dec along with a charge transfer resistance value of 2.9 Ω from electron impedance spectroscopy (EIS) analysis. From these results, it has been understood that the incorporation of Co metal into the MOF-5 microfibrous network has significantly improved the OER performance, which made them a potential entrant in other energy-related applications also.

MoS2 Decoration Followed by P Inclusion over Ni-Co Bimetallic Metal-Organic Framework-Derived Heterostructures for Water Splitting

Demonstrating a highly efficient non-noble bifunctional catalyst for complete water electrolysis remains challenging because of kinetic limitations and crucial importance for future energy harvesting. Herein, a low-cost, integrated composite of a Ni-Co metal-organic framework decorated with thin MoS₂ nanosheets was synthesized by a simple hydrothermal method followed by carbonization and phosphorization for electrochemical oxygen and hydrogen evolution reactions. Such a composite heterostructure exhibits outstanding performance in the electrocatalysis process with a lower overpotential of 184 mV for the oxygen evolution reaction (OER) and 84 mV for the hydrogen evolution reaction (HER) in 1.0 M KOH and 0.5 M H₂SO₄ electrolytes to reach a current density of 10 mA cm^-2, with a slight Tafel slope of 63 mV dec^-1 for the OER and 96 mV dec^-1 for the HER. The obtained results are far better than those of the commercial benchmark catalyst. Furthermore, online gas chromatography quantifies the amount of hydrogen generation in a symmetric cell as equal to 0.002121 moles with an energy efficiency of about 2.237 mg/kWh. Thus, the composite electrode's remarkable performance is further demonstrated as a potentially viable alternative non-noble electrocatalyst for energy conversion reactions.