Lanthanide-Organic Frameworks Featuring Three-Dimensional Inorganic Connectivity for Multipurpose Hydrocarbon Separation

Exceptionally High Perfluorooctanoic Acid Uptake in Water by a Zirconium-Based Metal-Organic Framework through Synergistic Chemical and Physical Adsorption

Perfluorooctanoic acid (PFOA) is an environmental contaminant ubiquitous in water resources, which as a xenobiotic and carcinogenic agent, severely endangers human health. The development of techniques for its efficient removal is therefore highly sought after. Herein, we demonstrate an unprecedented zirconium-based MOF (PCN-999) possessing Zr6 and biformate-bridged (Zr6)2 clusters simultaneously, which exhibits an exceptional PFOA uptake of 1089 mg/g (2.63 mmol/g), representing a ca. 50% increase over the previous record for MOFs. Single-crystal X-ray diffraction studies and computational analysis revealed that the (Zr6)2 clusters offer additional open coordination sites for hosting PFOA. The coordinated PFOAs further enhance the interaction between coordinated and free PFOAs for physical adsorption, boosting the adsorption capacity to an unparalleled high standard. Our findings represent a major step forward in the fundamental understanding of the MOF-based PFOA removal mechanism, paving the way toward the rational design of next-generation adsorbents for per- and polyfluoroalkyl substance (PFAS) removal.

Three-Dimensional Homochiral Covalent Organic Frameworks with Intrinsic Chiral Topology

Although a variety of chiral porous framework materials have been reported, there are few examples known to combine molecular chirality, helicity, and three-dimensional (3D) intrinsically chiral topology in one structure, which is beneficial for chirality transfer and amplification. Here, we report the synthesis of the first two 3D covalent organic frameworks (COFs) with an intrinsic chiral qzd topology, which exhibit unusual integration of various homochiral and homohelical features. By imine condensation of 4-connected porphyrin tetraamines and 2-connected enantiopure diene dialdehyde, we prepared two isostructural COFs with a noninterpenetrated qzd topology. The specific geometry and conformation flexibility of the V-shaped diene linker control the alignment of square-planar porphyrin units with rotational linkages and facilitate the creation of homochiral extended porous structures that feature a helical arrangement of porphyrins. Post-synthetic metalation of CCOF 23 with Rh(I) affords a heterogeneous catalyst for the asymmetric Michael addition reaction of aryl boronic acids to 2-cyclohexenone, which shows higher enantioselectivities compared to their homogeneous counterparts, presumably due to the confined effect of helical channels. This finding will provide an impetus to explore multichirality materials, offering new insights into the generation and control of helicity, homochirality, and enantioselectivity in the solid state.

Expanding MOF with Unexpanded Channel via Ketone Decorated Ligand for Ethylene Purification and Stability Enhancement

The concept of an expanding MOF with unexpanded channel size was realized in MOF NTUniv-61 by the utilization of a ketone-functional-group-decorated semirigid ligand and pillar-layer platform. After this unusual expansion, the preferential C2H6 adsorption was preserved via the unchanged pore size, and the functional group was inserted into the MOF. Interestingly, the C2H2 uptake ability, C2H4 selective adsorption ability, and structural stability were obviously enhanced due to the incorporation of the ketone functional group, which were further verified by isosteric heats of adsorption (Qst), GCMC modeling, and breakthrough experiments.

Integrating Self-Partitioned Pore Space and Amine Functionality into an Aromatic-Rich Coordination Framework with Ph Stability for Effective Purification of C2 Hydrocarbons

A great demand for high-purity C₂ hydrocarbons calls for the development of chemically stable porous materials for the effective isolation of C₂ hydrocarbons from CH₄ and CO₂. However, such separations are challenged by their similar physiochemical parameters and have not been systematically studied to date. In this work, we reported a cadmium-based rod-packing coordination framework compound ZJNU-140 of a new 5,6,7-c topology built up from a custom-designed tricarboxylate ligand. The metal-organic framework (MOF) features an aromatic-abundant pore surface, uncoordinated amine functionality, and self-partitioned pore space of suitable size. These structural characteristics act synergistically to provide the MOF with both selective recognition ability and the confinement effect toward C₂ hydrocarbons. As a result, the MOF displays promising potential for adsorptive separation of C₂-CH₄ and C₂-CO₂ mixtures. The IAST-predicted C₂/CH₄ and C₂/CO₂ adsorption selectivities, respectively, fall in the ranges of 7.3-10.2 and 2.1-2.9 at 298 K and 109 kPa. The real separation performance was also confirmed by dynamic breakthrough experiments. In addition, the MOF can maintain skeleton intactness in aqueous solutions with a wide pH range of 3-11, as confirmed by powder X-ray diffraction (PXRD) and isotherm measurements, showing no loss of framework integrity and porosity. The excellent hydrostability, considerable uptake capacity, impressive adsorption selectivity, and mild regeneration make ZJNU-140 a promising adsorbent material applied for the separation and purification of C₂ hydrocarbons.

Ligand Conformation Fixation Strategy for Expanding the Structural Diversity of Copper-Tricarboxylate Frameworks and C2H2 Purification Performance Studies

Structural and functional expansion of metal-organic frameworks (MOFs) is fundamentally important because it not only enriches the structural chemistry of MOFs but also facilitates the full exploration of their application potentials. In this work, by employing a dual-site functionalization strategy to lock the ligand conformation, we designed and synthesized a pair of biphenyl tricarboxylate ligands bearing dimethyl and dimethoxy groups and fabricated their corresponding framework compounds through coordination with copper(II) ions. Compared to the monofunctionalized version, introduction of two side groups can significantly fix the ligand conformation, and as a result, the dual-methoxy compound exhibited a different network structure from the mono-methoxy counterpart. Although only one almost orthogonal conformation was observed for the two ligands, their coordination framework compounds displayed distinct topological structures probably due to different solvothermal conditions. Significantly, with a hierarchical cage-type structure and good hydrostability, the dimethyl compound exhibited promising practical application value for industrially important C₂H₂ separation and purification, which was comprehensively demonstrated by equilibrium/dynamic adsorption measurements and the corresponding Clausius-Clapeyron/IAST/DFT theoretical analyses.

Substituent Engineering-Enabled Structural Rigidification and Performance Improvement for C2/CO2 Separation in Three Isoreticular Coordination Frameworks

Construction of porous solid materials applied to the adsorptive removal of CO₂ from C₂ hydrocarbons is highly demanded thanks to the important role C₂ hydrocarbons play in the chemical industry but quite challenging owing to the similar physical parameters between C₂ hydrocarbons and CO₂. In particular, the development of synthetic strategies to simultaneously enhance the uptake capacity and adsorption selectivity is very difficult due to the trade-off effect frequently existing between both of them. In this work, a combination of the dicopper paddlewheel unit and 4-pyridylisophthalate derivatives bearing different substituents afforded an isoreticular family of coordination framework compounds as a platform. Their adsorption properties toward C₂ hydrocarbons and CO₂ were systematically investigated, and subsequent IAST and density functional theory calculations combined with column breakthrough experiments verified their promising potential for C₂/CO₂ separations. Furthermore, the substituent engineering endowed the resulting compounds with simultaneous enhancement of uptake capacity and adsorption selectivity and thus better C₂/CO₂ separation performance compared to their parent compound. The substituent introduction not only mitigated the framework distortion via fixing the ligand conformation for establishment of better permanent porosity required for gas adsorption but also polarized the framework surface for host-guest interaction improvement, thus resulting in enhanced separation performance.

Amino-Functionalized Single-Lanthanide Metal-Organic Framework as a Ratiometric Fluorescent Sensor for Quantitative Visual Detection of Fluoride Ions

Excessive content of fluoride ions (F^-) in water will lead to water pollution and endanger human health, so the research on the method of low-cost, rapid, and efficient detection of F^- is of particular significance. In this work, an amino-functionalized ligand with an appropriate triplet energy excited state, 2'-amino-[1,1':4',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid (H₄TPTC-NH₂), was selected to construct a luminescent single-lanthanide metal-organic framework, EuTPTC-NH₂, with uncoordinated amino groups for the detection of F^-. Based on host-guest interactions, that is, hydrogen bonds formed between the free amino groups and F^- ions, EuTPTC-NH₂ was developed as a ratiometric fluorescence probe for F^- detection with good anti-interference ability, low detection limit, high water stability, and selectivity. It was found that EuTPTC-NH₂ has an excellent linear response to F^- in the concentration range of 0-80 μM with high sensitivity and a low detection limit of 11.26 μM. A hydrogel membrane based on the combination of EuTPTC-NH₂ and agarose was also prepared for the quantitative visual detection of F^- in water.

Water-Stable Eu6-Cluster-Based fcu-MOF with Exposed Vinyl Groups for Ratiometric and Fluorescent Visual Sensing of Hydrogen Sulfide

Detection of H₂S in the biological system has attracted enormous attention in recent years. In this work, a new vinyl-functionalized metal-organic framework (MOF), [(Me₂NH₂)₂] [Eu₆(μ₃-OH)₈(BDC-CH═CH₂)₆(H₂O)₆] (Eu-BDC-CH═CH₂, BDC-CH═CH₂ = 2-vinylterephthalic acid), was synthesized under solvothermal conditions. The vinyl groups in the ligands can not only modulate the "antenna effect" of the ligand on Eu³⁺ ions but also serve as an exposed reactive site to allow for the quantitative detection of H₂S by Eu-BDC-CH═CH₂. The ratiometric fluorescent probe has the advantages of water stability, acid-base stability (pH = 2-11), fast response (<2 min), high selectivity, and sensitivity (LOD = 38.4 μM). We also used Eu-BDC-CH═CH₂ to detect and analyze H₂S in tap and lake waters, demonstrating the potential of the probe for biological and environmental applications. In addition, the MOF-based agarose hydrogel film allows for the visual detection of H₂S via a smartphone by identifying the RGB values. The vinyl-functionalized MOF can thus be a powerful sensing platform for H₂S.

Recent progress on porous MOFs for process-efficient hydrocarbon separation, luminescent sensing, and information encryption

Metal-organic frameworks (MOFs), as an emerging class of porous materials, excel in designability, regulatability, and modifiability in terms of their composition, topology, pore size, and surface chemistry, thus affording a huge potential for addressing environment and energy-related challenges. In particular, MOFs can be applied as porous adsorbents for the purification of industrially important hydrocarbons through certain process-efficient separation schemes based on selectivity-reversed adsorption and multicomponent separation. Moreover, the vast combination possibilities and controllable and engineerable luminescent units of MOFs make them a versatile platform to develop functionally tailored materials for luminescent sensing and optical data encryption. In this feature article, we summarize the recent progress in the use of porous MOFs for the separation and purification of acetylene (C₂H₂) and ethylene (C₂H₄) based on selectivity-reversed adsorption and multicomponent separation strategies. Moreover, we highlight the advances over the past three years in the field of MOF-based luminescent materials for thermometry, turn-on sensing, and information encryption.

Robust metal–organic framework with abundant large electronegative sites for removal of CO2 from a ternary C2H2/C2H4/CO2 mixture

Herein, a MOF with cavities decorated with high-density electronegative F and O sites for the challenging separation of a ternary equimolar mixture of C2H2, C2H4, and CO2 is presented.

General pore features for one-step C2H4 production from C2 hydrocarbon mixture

Herein we proposed the required general pore features for one-step C2H4 production from C2 hydrocabon mixture: (i) non-metallic binding site; (ii) polar pore surface; (iii) narrow pocket. Four representative MOFs...