Structural Insight into Complexation Ability and Coordination of Uranyl Nitrate by 1,10-Phenanthroline-2,9-diamides

Introducing Phosphate Ester into DAPhen by Propyl Enhanced the Selectivity for UO22+ over Th4

A new type of phenanthroline carboxamide(DAPhen)-phosphate ester ligand (L1/L2) was synthesized for the selective separation of U(VI) over Th(IV). Liquid-liquid extraction experiments showed that the introduction of phosphate ester could increase the extraction ability of ligands for U(VI), especially L2, which showed high selectivity for the separation of U(VI) over Th(IV). The slope analysis indicated that L1 could form 1:1 and 1:2 complexes with U(VI) and 1:1 complexes with Th(IV). NMR titration revealed that the DAPhen unit of ligands combined with one U(VI) to form 1:1 complexes, and then the phosphate ester unit of the 1:1 complexes further combined with another U(VI) to form 1:2 complexes. Ligands provide only the DAPhen unit to Th(IV) to form 1:1 complexes. The crystal structures found 1:2 complexes of L1 and U(VI), 1:1 complexes of L2 and U(VI), and 1:1 complexes of L1 and Th(IV). The larger stability constant (log β) of the 1:1 complexes of L2 with U(VI) than that of the 1:1 complexes of L1 with U(VI) showed that the binding ability of U(VI) with the DAPhen unit of L2 is stronger than that of U(VI) with the DAPhen unit of L1. This study provides new ideas for designing extractants with excellent properties.

Precise Electrocatalysis on Fe-Porphyrin Conjugated Networks Achieves Energy-Efficient Extraction of Uranium

Electrochemical extraction has the potential to enhance uranium (U) extraction capacity and rates, but thus far, high selectivity and energy efficiency have not been achieved through the design of electrode materials. Herein, a precise electrocatalysis strategy is developed using a Ferrum (Fe) porphyrin-phenanthroline conjugated network (Fe@PDACN) for energy-efficient uranium extraction. The phenanthroline provides specific binding sites for selective enrichment of U(VI) at active sites (Kd = 2.79 × 105 mL g-1 in multi-ion solution). The Fe(II) sites have strong trap-redox activity for U(VI) and act as dynamic electron donors to rapidly mediate electrocatalytic U(VI) extraction through the redox reaction of Fe(0/II)/Fe(III). Moreover, the Fe-porphyrin blocks support sustained electron donation for U(VI) electrocatalysis by pre-storing electrons. These features enable selective uranium capture and a high electroextraction capacity of 24 646.3 mg g-1 from simulated nuclear wastewater in 280 h at a low voltage of -1.5 V. An ultra-high Faraday efficiency of 90.1% is achieved, and the energy cost is 3.22 × 10-2 $ kg-1 U, significantly lower than the previously reported materials. This work provides a highly efficient strategy for uranium extraction from water.

Complexation and extraction of trivalent actinides over lanthanides using highly soluble phenanthroline diamide ligands with different side chains

Although phenanthroline diamide ligands have been widely reported, their limited solubility in organic solvents and poor performance in the separation of trivalent actinides (An(III)) and lanthanides (Ln(III)) at high acidity are still clear demerits. In this study, we designed and synthesized three highly soluble phenanthroline diamide ligands with different side chains. By introducing alkyl chains and ester groups, the ligands solubility in 3-nitrotrifluorotoluene is increased to over 600 mmol/L, significantly higher than the previous reported phenanthroline diamide ligands. Based on anomalous aryl strengthening, benzene ring was incorporated to enhance ligand selectivity toward Am(III). Extraction experiments demonstrated favorable selectivity of all the three ligands towards Am(III). The optimal separation factor (SFAm/Eu) reaches 53 at 4 mol/L HNO3, representing one of the most effective separation of An(III) over Ln(III) under high acidity. Slope analysis, single crystal structure analysis, as well as titration of ultraviolet visible spectroscopy, mass spectrometry, and nuclear magnetic resonanc confirmed the formation of 1:1 and 1:2 complex species between the metal ions and the ligands depending on the molar ratio of metal ions in the reaction mixture. The findings of this study offer valuable insights for developing phenanthroline diamide ligands for An(III)/Ln(III) separation.

Selective Separation of U(VI) from Pu(IV) by 2,9-Diamide-1,10-phenanthroline Ligands at High Acidity: Extraction and Coordination Chemistry

During the PUREX process, the separation between U(VI) and Pu(IV) is achieved by reducing Pu(IV) to Pu(III), which is complicated and energy-consuming. To address this issue, we report here the first case of separation of U(VI) from Pu(IV) by o-phenanthroline diamide ligands under high acidity. Two new o-phenanthroline diamide ligands (1,10-phenanthroline-2,9-diyl)bis(indolin-1-ylmethanone) (L1) and (1,10-phenanthroline-2,9-diyl)bis((2-methylindolin-1-yl)methanone) (L2) were synthesized, which can effectively separate U(VI) from Pu(IV) even at 4 mol/L HNO3. The highest separation factor of U(VI) and Pu(IV) can reach over 1000, setting a new record for the separation of U(VI) from Pu(IV) under high acidity. Furthermore, extracted U(VI) can be easily recovered with water or dilute nitric acid, and the extraction performance remains stable even after 150 kGy gamma irradiation, which provides solid experimental support for potential engineering applications. The results of UV-vis titration and single-crystal X-ray diffraction measurements show that the 1:1 complex formed by L1 with U(VI) is more stable than all of the previously reported phenanthroline ligands, which reasonably reveals that the ligand L1 designed in this work has excellent affinity for U(VI). The findings of this work promise to contribute to the facilitation of the PUREX process by avoiding the use of reducing agents. It also provides new clues for designing ligands to achieve efficient separation between U(VI) and Pu(IV) at high acidity.

Laboratory-based X-ray spectrometer for actinide science

X-ray absorption and emission spectroscopies nowadays are advanced characterization methods for fundamental and applied actinide research. One of the advantages of these methods is to reveal slight changes in the structural and electronic properties of radionuclides. The experiments are generally carried out at synchrotrons. However, considerable progress has been made to construct laboratory-based X-ray spectrometers for X-ray absorption and emission spectroscopies. Laboratory spectrometers are reliable, effective and accessible alternatives to synchrotrons, especially for actinide research, which allow dispensing with high costs of the radioactive sample transport and synchrotron time. Moreover, data from laboratory spectrometers, obtained within a reasonable time, are comparable with synchrotron results. Thereby, laboratory spectrometers can complement synchrotrons or can be used for preliminary experiments to find perspective samples for synchrotron experiments with better resolution. Here, the construction and implementation of an X-ray spectrometer (LomonosovXAS) in Johann-geometry at a radiochemistry laboratory is reported. Examples are given of the application of LomonosovXAS to actinide systems relevant to the chemistry of f-elements, the physical chemistry of nuclear power engineering and the long-term disposal of spent nuclear fuel.

4-Oxo-7-fluoro-1,10-phenanthroline-2,9-diamides: Synthesis, Structural Features, Lanthanide Complexes, and Am(III)/Ln(III) Solvent Extraction

A highly efficient synthetic approach was developed for the synthesis of unsymmetrical 1,10-phenanthroline-2,9-diamides with two different substituents in the fourth and seventh positions of the phenanthroline core. The structures of these ligands were confirmed using various spectral methods including 2D-NMR and X-ray analysis. Quantum chemical calculations supported the presence of tautomeric forms of these ligands. Furthermore, it was discovered that these compounds exhibit polydentate ligand behavior toward lanthanide nitrates. The structural characteristics of the complexes formed between these ligands and lanthanide nitrates were investigated both in the solid state and in solution. To further understand the binding properties of these novel unsymmetrical ligands, the binding constants for potential complexes were quantitatively measured by using UV-vis spectrophotometric titration. This allowed for a comprehensive analysis of the binding affinity and stability of these complexes. Extraction experiments of f-elements were performed for symmetrical and unsymmetrical diamides. Overall, this study presents significant advancement in the synthesis and characterization of unsymmetrical 1,10-phenanthroline-2,9-diamides and provides valuable insights into their potential applications as polydentate ligands for lanthanide nitrates.

Synthesis of sp2 Carbon-Conjugated Covalent Organic Framework Thin-Films via Copper-Surface-Mediated Knoevenagel Polycondensation

sp2 carbon-conjugated covalent organic framework (sp2 c-COF) featured with high π-conjugation, high chemical stabilities, and designable chemical structures, are thus promising for applications including adsorption and separation, optoelectronic devices, and catalysis. For the most of these applications, large-area and continuous films are required. However, due to the needs of harsh conditions in the formation of CC bonds, classical interfacial methodologies are challenged in the synthesis of sp2 c-COFs films. Herein, a novel and robust interfacial method namely copper-surface-mediated Knoevenagel polycondensation (Cu-SMKP), is shown for scalable synthesis of sp2 c-COF films on various Cu substrates. Using this approach, large-area and continuous sp2 c-COF films could be prepared on various complicated Cu surfaces with thickness from tens to hundreds of nanometers. The resultant sp2 c-COF films on Cu substrate could be used directly as functional electrode for extraction of uranium from spiked seawater, which gives an exceptionally uptake capacity of 2475 mg g-1 . These results delineate significant synthetic advances in sp2 c-COF films and implemented them as functional electrodes for uranyl capture.

First 24-Membered Macrocyclic 1,10-Phenanthroline-2,9-Diamides-An Efficient Switch from Acidic to Alkaline Extraction of f-Elements

A reaction of acyl chlorides derived from 1,10-phenanthroline-2,9-dicarboxylic acids with piperazine allows the preparation of the corresponding 24-membered macrocycles in good yield. The structural and spectral properties of these new macrocyclic ligands were thoroughly investigated, revealing promising coordination properties towards f-elements (Am, Eu). It was shown that the prepared ligands can be used for selective extraction of Am(III) from alkaline-carbonate media in presence of Eu(III) with an SF_Am/Eu up to 40. Their extraction efficiency is higher than calixarene-type extraction of the Am(III) and Eu(III) pair. Composition of macrocycle-metal complex with Eu(III) was investigated by luminescence and UV-vis spectroscopy. The possibility of such ligands to form complexes of L:Eu = 1:2 stoichiometry is revealed.

Selective Complexation and Separation of Uranium(VI) from Thorium(IV) with New Tetradentate N,O-Hybrid Diamide Ligands: Synthesis, Extraction, Spectroscopy, and Crystallographic Studies

An unmet challenge in the thorium-uranium fuel cycle is the efficient separation of uranium from thorium. Herein, two new tetradentate N,O-hybrid ligands, N,N'-diethyl-N,N'-di-p-tolyl-2,2'-bipyridine-6,6'-dicarboxamide (Et-Tol-BPDA) and N,N'-diethyl-N,N'-di-p-tolyl-2,2'-bipyrimidine-4,4'-dicarboxamide (Et-Tol-BPymDA), comprising a bipyridine or bipyrimidine core and amide moieties were designed and synthesized for selectively complexing and separating U(VI) from Th(IV). The high U(VI)/Th(IV) extraction selectivity was achieved by Et-Tol-BPDA (SF_U/Th = 33 at 3 M HNO₃) and Et-Tol-BPymDA (SF_U/Th = 73 at 3 M HNO₃) in nitric acid solutions. The extraction process for U(VI) or Th(IV) with these two ligands primarily proceeded through the solvation mechanism, as evidenced by slope analyses. Thermodynamic studies for the extraction of U(VI) and Th(IV) revealed a spontaneous process. Results from UV-vis spectroscopic titration and slope analyses demonstrated that U(VI) and Th(IV) each form a 1:1 complex with the two ligands both in the monophasic organic solution and the biphasic extraction system. The stability constants of the 1:1 complexes of Et-Tol-BPDA or Et-Tol-BPymDA with U(VI) were found to be larger than those with Th(IV), which coincide well with the high U(VI)/Th(IV) extraction selectivity. The solid-state structures of Et-Tol-BPDA, Et-Tol-BPymDA, and 1:1 complexes of the two ligands with U(VI) or Th(IV) were analyzed by X-ray diffraction technique. The results from this work implicate the potential of bipyridine- and bipyrimidine-derived diamide ligands for uranium/thorium separation.

Theoretical Insights into the Substitution Effect of Phenanthroline Derivatives on Am(III)/Eu(III) Separation

Separation of trivalent actinides (An(III)) and lanthanides (Ln(III)) poses a huge challenge in the reprocessing of spent nuclear fuel due to their similar chemical properties. N,N'-Diethyl-N,N'-ditolyl-2,9-diamide-1,10-phenanthroline (Et-Tol-DAPhen) is a potential ligand for the extraction of An(III) from Ln(III), while there are still few reports on the effect of its substituent including electron-withdrawing and electron-donating groups on An(III)/Ln(III) separation. Herein, the interaction of Et-Tol-DAPhen ligands modified by the electron-withdrawing groups (CF₃, Br) and electron-donating groups (OH) with Am(III)/Eu(III) ions was investigated using scalar relativistic density functional theory (DFT). The analyses of bond order, quantum theory of atoms in molecules (QTAIM), and molecular orbital (MO) indicate that the substitution groups have a slight effect on the electronic structures of the [M(L-X)(NO₃)₃] (X = CF₃, Br, OH) complexes. However, the thermodynamic results suggest that a ligand with the electron-donating group (L-OH) improves the extraction ability of metal ions, and the ligand modified by the electron-withdrawing group (L-Br) has the best Am(III)/Eu(III) selectivity. This work could render new insights into understanding the effect of electron-withdrawing and electron-donating groups in tuning the selectivity of Et-Tol-DAPhen derivatives and pave the way for designing new ligands modified by substituted groups with better extraction ability and An(III)/Ln(III) selectivity.

Solvation-Anionic Exchange Mechanism of Solvent Extraction: Enhanced U(VI) Uptake by Tetradentate Phenanthroline Ligands

Phenanthroline diamides (L) demonstrated a unique ability to extract uranium from nitric acid solutions into a polar organic solvent forming complexes of 1:2 stoichiometry as tight ion pairs {[UO₂LNO₃]⁺[UO₂(NO₃)₃]^-} by a novel extraction mechanism, which is a combination of two already well-known mechanisms: solvation and ion-pair anion exchange. A UV-vis study was used to confirm the formation of such complexes directly in the organic phase. Moreover, chemical synthesis and single crystal growth were performed to confirm unambiguously the structure of the complexes in the solid state.

Solvent Extraction and Conformation Rigidity: Actinide(IV) and Actinide(VI) Come Together

The first comprehensive structural and extraction study of a 2,2'-bipyridine-6,6'-dicarboxamide (L diamide) extractant for U, Np, Pu, Th, Am, and Eu ions showed great potential for actinide separation due to steric hindrance of the amidic side phenyl ring of the given compound. The study of the complexes of An(VI) and Th(IV) with 2,2'-bipyridyldicarboxamide-type extractants demonstrated the structure of the extraction species for the first time. Investigation of the extraction properties with the radiometric and millimolar quantities of actinides showed similar extraction trends. For the first time, a metal-ion-induced phenyl-ring rotation restriction was found for the U, Th, and Eu complexes by employing temperature-dependent dynamic NMR. A study of the solution behavior of the complexes accompanied by density functional theory modeling studies elucidated the mechanism of the unusual C-N bond rotation restriction induced by metal coordination.

Competing Routes in the Extraction of Lanthanide Nitrates by 1,10-Phenanthroline-2,9-diamides: An Impact of Structure of Complexes on the Extraction

The fact of the fracture of the extraction curve of lanthanides by 1,10-phenanthroline-2,9-diamides is explained in terms of the structure of complexes, solvent extraction data and quantum chemical calculations. The solvent extraction proceeds in two competing directions: in the form of neutral complexes LLn(NO₃)₃ and in the form of tight ion pairs {[LLn(NO₃)₂ H₂O]⁺ (NO₃^-).

First Example of Fluorinated Phenanthroline Diamides: Synthesis, Structural Study, and Complexation with Lanthanoids

An efficient approach to the synthesis of diamides of 4,7-difluoro-1,10-phenanthroline-2,9-dicarboxylic acid was elaborated. Direct nucleophilic substitution with 4,7-dichloro-1,10-phenanthroline precursors opened access to difluoro derivatives in high yield. As a result, four new fluorinated ligands were prepared in up to 88% yield. Their structure was proved by a combination of spectral methods and X-ray data. A set of lanthanoid complexes was prepared to demonstrate the utility of new ligands. The structure of the complexes was studied in solid state (IR-spectroscopy, X-ray diffraction) and in solution (NMR-spectroscopy).

First Trifluoromethylated Phenanthrolinediamides: Synthesis, Structure, Stereodynamics and Complexation with Ln(III)

The first examples of 1,10-phenanthroline-2,9-diamides bearing CF₃-groups on the side amide substituents were synthesized. Due to stereoisomerism and amide rotation, such complexes have complicated behavior in solutions. Using advanced NMR techniques and X-ray analysis, their structures were completely elucidated. The possibility of the formation of complex compounds with lanthanoids nitrates was shown, and the constants of their stability are quantified. The results obtained are explained in terms of quantum-chemical calculations.

2-Methylpyrrolidine derived 1,10-phenanthroline-2,9-diamides: promising extractants for Am(iii)/Ln(iii) separation

In this work we report on new examples of phenanthrolindiamides containing asymmetric centers in amide substituents.