A Benzothiadiazole-Based Eu3+ Metal-Organic Framework as the Turn-On Luminescent Sensor toward Al3+ and Ga3+ with Potential Bioimaging Application

Highly stable Tb(III) metal-organic framework derived from a new benzothiadiazole functionalized ligand for fluorescence recognition of ascorbic acid

Because ascorbic acid (AA) is one of the basic elements to maintain the normal physiological functions of human body, it is urgent to develop a material that can achieve efficient, rapid and in-situ detection for AA. A new fluorescence organic compound 4',4'''-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-4-carboxylic acid) (H2BTBC) based on benzothiadiazole group has been synthesized, which can detect Fe3+ ions by fluorescence turn-off effect with a detection limit of 0.015 μM, as well as recognize linear amines by fluorescence turn-on effect. Moreover, a highly stable Tb(III) metal-organic framework has been solvothermally prepared with H2BTBC, namely {[(CH3)2NH2]2[Tb2(BTBC)4]∙solvents}n (JXUST-39), which can selectively detect AA among biological fluids by fluorescence enhancement effect with a detection limit of 0.077 μM. In addition, the mechanism for JXUST-39 detecting AA is possibly the cooperative effect of absorbance-caused enhancement and charge transfer between JXUST-39 and AA. Moreover, LED lamp beads, fluorescent films and fluorescent detection test paper based on JXUST-39 were prepared to achieve portable detection via fluorescence enhancement effect.

Efficient smart-phone luminescent sensing detection based on new multifunctional Cd(II) luminescent coordination polymers

Based on the mixed ligand strategy, two new isostructural CdII coordination polymers: {[Cd3(tcpa)2(bima)(DMF)]‧3DMF} (CP 1), {[Cd3(tcpa)2(bmima)(DMF)]‧3DMF} (CP 2) were synthesized by combining two flexible anthracene-based and a triphenylamine-based ligands with large π-electron-rich structure using a solvothermal method (H3tcpa = tris(4-carboxyphenyl)amine; bima = 9,10-bis(1H-imidazole-1-yl)methyl)anthracene and bmima = 9,10-bis((2-methyl-1H-imidazol-1-yl)methyl)anthracene). CP 1 and CP 2 show an unreported new 3D (3,14)-c net structure with the {430·648·813}{43}4 topology. Both CPs could detect Cr2O72-, Nitroaromatic explosives 2,4,6-Trinitrophenol (TNP) and 2,4-dinitrophenol (DNP) through rapid fluorescence quenching response with high quenching efficiency Ksv and low LOD with 0.19 μM (Cr2O72-), 0.54 μM (TNP), 0.76 μM (DNP) for CP 1 and 0.28 μM (Cr2O72-), 0.23 μM (TNP), 0.65 μM (DNP) for CP 2, respectively. In addition, the mechanism of quenching Cr2O72-, TNP and DNP by CPs is proposed through experimental research and theoretical simulation. The quenching of Cr2O72- by CPs is mainly competitive absorption (CA), while the quenching of TNP/DNP is achieved through the coexistence of competitive absorption CA, photo induced electron transfer (PET) and fluorescence resonance energy transfer (FRET). Moreover, we have been developed a portable smartphone-assisted on-site detection platform, which can perform semi-quantitative analysis of Cr2O72- acconding to fluorescence color changes. This work constructed a ratiometric sensing platform for quickly and conveniently detection of Cr2O72-, TNP and DNP pollutants.

One-Pot In Situ Construction of a Highly Stable Acylhydrazone-Derived Dy9 Cluster with Photodynamic Sterilization Property

The extremely low stability of lanthanide clusters with precise structures and nanometer dimensions in aqueous solutions limits their application in the field of photodynamic sterilization. In this study, an hourglass-shaped nine-nucleated Dy9 cluster (1) with excellent light-driven reactive oxygen species (ROS) generation ability and photodynamic sterilization property was constructed using acylhydrazone multidentate chelating ligands obtained via an in situ reaction. The eight chelating ligands were distributed outside cluster 1, tightly wrapping the cluster core, thus preventing solvent molecules from attacking the cluster nucleus and ensuring the stability of cluster 1 in solution, which was demonstrated via X-ray diffraction and high-resolution electrospray ionization mass spectrometry (HRESI-MS). Time-dependent HRESI-MS monitoring of the self-assembly process of cluster 1 allowed two possible self-assembly mechanisms. The heavy atom effect of multiple Dy(III) ions in the Dy9 cluster enhanced the ISC pathway through spin-orbit coupling, promoting energy transfer from the excited singlet state (S1) to the triplet state (T1), which was stabilized, inducing the generation of more ROS. Cluster 1 showed a remarkable sterilization effect due to the generation of abundant ROS under light irradiation conditions. To our knowledge, this is a rare instance of lanthanide clusters with photodynamic sterilization, providing new horizons for the construction of fast and efficient sterilizers.

Asymmetrical Modification of Cyclopentadienyl Cobalt in Eu-MOF for C2H2/CO2 Separation

The development of novel adsorption materials is of significance for the efficient and low-energy purification of acetylene (C2H2). Emerging metal-organic framework (MOF) adsorbents demonstrate great application prospects in the field of gas adsorption and separation. Herein, we synthesized a Eu-MOF asymmetrically modified with cyclopentadienyl cobalt exhibiting two different types of cages, denoted as UPC-119. Adsorption isotherms and dynamic breakthrough curves confirm its potential in C2H2/CO2 separation, which is further evidenced by theoretical simulations. The high adsorption capacity and low adsorption enthalpy render UPC-119 as a promising adsorbent for C2H2/CO2 separation with ease of regeneration.

Regulating the Topologies and Photoresponsive Properties of Lanthanum-Organic Frameworks

Metal-organic frameworks (MOFs) show potential application in many domains, in which photochromic MOFs (PMOFs) have received enormous attention. Researchers mainly utilize photoactive ligands to build PMOFs. Recently, the mixed electron donating and accepting ligands strategies have also been used to construct PMOFs driven by the electron transfer between nonphotochromic moieties. However, the potential interligand competition inhibits the formation of PMOFs. Therefore, the exploration of single-ligand-guided assembly is conductive for building PMOFs. Considering the existing electron accepting and donating role of pyridyl and carboxyl, the pyridinecarboxyate derived from the fusion of pyridyl and carboxyl units may serve as single ligand to yield PMOFs (Figure 1d). In this work, the coordination assembly of bipyridinedicarboxylate (2,2'-bipyridine-4,4'-dicarboxylic acid, H2bpdc; 1,10-phenanthroline-2,9-dicarboxylic acid, H2pda) and LaCl3 generate two PMOFs, [La(bpdc)(H2O)Cl] (1) and [La(pda)(H2O)2Cl]⋅2H2O (2). Both complexes feature dinuclear lanthanum as building blocks with differences in the connecting number of likers, in which 1 has (4,8)-connected topology and 2 exhibits sql topology. Their structural differences result in the diversities of photoresponsive functionalities. Compared with reported PMOFs built from photoactive ligands and mixed ligands, this study provides new available categories of single ligand for generating PMOFs and tuning the structure and photoresponsive properties via ligand substitution and external photostimulus.

Multiresponsive luminescent metal-organic framework for cooking oil adulteration detection and gallium(III) sensing

A new 3D metal-organic framework {[Cd16(tr2btd)10(dcdps)16(H2O)3(EtOH)]∙15DMF}n (MOF 1, tr2btd = 4,7-di(1,2,4-triazol-1-yl)benzo-2,1,3-thiadiazole, H2dcdps = 4,4'-sulfonyldibenzoic acid) was obtained and its luminescent properties were studied. MOF 1 exhibited bright blue-green luminescence with a high quantum yield of 74 % and luminescence quenching response to a toxic natural polyphenol gossypol and luminescence enhancement response to some trivalent metal cations (Fe3+, Cr3+, Al3+ and Ga3+). The limit of gossypol detection was 0.20 µM and the determination was not interfered by the components of the cottonseed oil. The limit of detection of gallium(III) was 1.1 µM. It was demonstrated that MOF 1 may be used for distinguishing between the genuine sunflower oil and oil adulterated by crude cottonseed oil through qualitative luminescent and quantitative visual gossypol determination.

Linker Engineering toward Tunable Emission Behavior of Porous Interpenetrated Zr-Organic Frameworks

Conjugated molecules with donor-acceptor-donor (D-A-D) moieties have garnered significant attention for their ability to form luminescent metal-organic frameworks (LMOFs). D-A-D molecules feature tunable bandgaps, which can be varied systematically to control the fluorescence wavelength of LMOFs. In this study, we prepared and characterized the fluorescence properties of two porous interpenetrated Zr-organic frameworks (PIZOFs) constructed using 4,4'-(benzo[c][1,2,5]selenadiazole-4,7-diylbis(ethyne-2,1-diyl))dibenzoic acid (L-Se) or 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diylbis(ethyne-2,1-diyl))dibenzoic acid (L-S) as linkers. The corresponding MOFs are denoted as PIZOF-Se and PIZOF-S, respectively. Through our investigation, we explored the correlation between the structure of the frameworks and their respective optical properties. Our findings revealed that there are distinct differences in the fluorescence properties of the two PIZOFs. Specifically, the fluorescence of PIZOF-S is red-shifted from that characteristic of the corresponding linker, L-S. By contrast, the fluorescence of PIZOF-Se is substantially blue-shifted from that of linker L-Se. The emission of mixed-linker MOFs is explored by combining L-S or L-Se with structurally analogous, but nonfluorescent linker, 4,4'-((perfluoro-1,4-phenylene)bis(ethyne-2,1-diyl))dibenzoic acid (L-F). Based on steady-state and time-resolved photoluminescence experiments, as well as confocal fluorescence microscopy combined with fluorescence lifetime imaging (FILM), we demonstrated that linker engineering is an effective method to tune the emission behavior of LMOFs.

A benzothiophene-based fluorescent probe with dual-functional to polarity and cyanide for practical applications in living cells and real water samples

Polarity is a significant intracellular environmental parameter associated with cancer, while cyanide (CN-) is known to be highly toxic to humans. In this work, we designed a dual-functional fluorescent probe (TPABT) for simultaneous detection of polarity and CN-. As a polarity sensor, the probe exhibits NIR emission at 766 nm in 1,4-dioxane (non-polar solvent), whose emission intensity is 71-fold stronger than that in water (polar solvent). Meanwhile, the fluorescence intensity and quantum yield are linearly related to solvent polarity, confirming the polarity response ability of TPABT. For cell polarity detection, low cytotoxicity and polarity sensitivity of probe enable the applications for differentiating cancer cells (HeLa, 4TI) from normal cells (HUV, 3 T3) and monitoring the polarity changes of 4TI cells. As a CN- sensor, TPABT displays a turn-on fluorescence at 640 nm upon the addition of CN-, with advantages of anti-interference, response in aqueous media and low detection limit (22 nM). Additionally, we further explored the practical applications of TPABT for CN- determination in three types of real water samples (drinking water, tap water and lake water) and living cells. Notably, TPABT responses to polarity and CN- in two independent fluorescence channels of 766 and 640 nm, respectively, ensuring the dual functions for polarity and CN- sensing. Consequently, this multi-responsive fluorescent probe TPABT is promising to diagnose polarity-related diseases and detect CN- in real environments.

A dual-responsive RhB-doped MOF probe for simultaneous recognition of Cu2+ and Fe3

Based on the dual response of RhB@UiO-67 (1:6) to Cu2+ and Fe3+, a proportional fluorescent probe with (I392/I581) as the output signal was developed to recognize Cu2+ and Fe3+. Developing highly sensitive and selective trace metal ions probes is crucial to human health and ecological sustainability. In this work, a series of ratio fluorescent probes (RhB@UiO-67) were successfully synthesized using a one-pot method to enable fluorescence sensing of Cu2+ and Fe3+ at low concentrations. The proportional fluorescent probe RhB@UiO-67 (1:6) exhibited simultaneous quenching of Cu2+ and Fe3+, which was found to be of interest. Furthermore, the limits of detection (LODs) for Cu2+ and Fe3+ were determined to be 2.76 μM and 0.76 μM, respectively, for RhB@UiO-67 (1:6). These values were significantly superior to those reported for previous sensors, indicating the probe's effectiveness in detecting Cu2+ and Fe3+ in an ethanol medium. Additionally, RhB@UiO-67 (1:6) demonstrated exceptional immunity and reproducibility towards Cu2+ and Fe3+. The observed fluorescence quenching of Cu2+ and Fe3+ was primarily attributed to the mechanisms of fluorescence resonance energy transfer (FRET), photoinduced electron transfer (PET), and competitive absorption (CA). This work establishes a valuable foundation for the future study and utilization of Cu2+ and Fe3+ sensing technologies.

Yb-to-Eu Cooperative Sensitization Upconversion in a Multifunctional Molecular Nonanuclear Lanthanide Cluster in Solution

Lanthanide metal clusters excel in combining molecular and material chemistry properties. Here, we report an efficient cooperative sensitization UC phenomenon of a Eu3+/Yb3+ nonanuclear lanthanide cluster in CD3OD. The synthesis and characterization of the heteronuclear cluster in the solid state and solution are described together with the UC phenomenon showing Eu3+ luminescence in the visible region upon 980 nm NIR excitation of Yb3+ at concentrations as low as 100 nM. Alongside being the Eu/Yb cluster to display UC (with a quantum yield value of 4.88 × 10-8 upon 1.13 W cm-2 excitation at 980 nm), the cluster exhibits downshifted light emission of Yb3+ in the NIR region upon 578 nm visible excitation of Eu3+, which is ascribed to sensitization pathways for Yb through the 5D0 energy levels of Eu3+. Additionally, a faint emission is also observed at ca. 500 nm upon 980 nm excitation, originating from the cooperative luminescence of Yb3+. The [Eu8Yb(BA)16(OH)10]Cl cluster (BA = benzoylacetonate) is also a field-induced single-molecular magnet (SMM) under 4K with a modest Ueff/kB of 8.48 K, thereby joining the coveted list of Yb-SMMs and emerging as a prototype system for next-generation devices, combining luminescence with single-molecular magnetism in a molecular cluster.

A dysprosium(III)-based triple helical-like complex as a turn-on/off fluorescence sensor for Al(III) and 4,5-dimethyl-2-nitroaniline

A novel triple helical-like complex [Dy2K2L3(NO3)2]·3DMF (1) based on a designed Schiff base N'1,N'3-bis((E)-3-ethoxy-2-hydroxybenzylidene)-malonohydrazide (H4L) was synthesized with good chemical and thermal stabilities. Single-crystal X-ray structural analysis showed that 1 presents a tetranuclear triple helical-like structure via the coordination mode of Dy : K : L with 2 : 2 : 3 stoichiometry. Fluorescence measurements showed that 1@EtOH has excellent fluorescence turn-on/off response ability for aluminium ions and 4,5-dimethyl-2-nitroaniline (DMNA) with outstanding selectivity, sensitivity, and anti-interference ability. The calculated limit of detection (LOD) values for 1@EtOH to Al3+ and DMNA were found to be 0.53 and 3.33 μM, respectively. Density functional theory (DFT) calculation showed that the fluorescence response mechanism can be explained by the photoinduced electron transfer (PET) mechanism; meanwhile, the inner filter effect (IFE) of DMNA can also affect the emission of 1@EtOH.

Three robust Cd(II) coordination polymers as bifunctional luminescent probes for efficient detection of pefloxacin and Cr2O72- in water

The accurate and rapid detection of antibiotics and heavy-metal-based toxic oxo-anions in water media employing coordination polymers (CPs) as luminescent probes has attracted a lot of attention. Three new Cd(II)-based ternary CPs derived from first-presented L ligands, including [Cd(DCTP)(L)(OH)]n (1), [Cd(TBTA)(L)(OH)]n (2), and [Cd(NPHT)(L)(H2O)]n (3) (L = 2-((1H-imidazol-1-yl)methyl)-5,6-dimethyl-1H-benzo[d]imidazole, H2DCTP = 2,5-dichloroterephthalic acid, H2TBTA = tetrabromoterephthalic acid and H2NPHT = 3-nitrophthalic acid), were successfully assembled and characterized. 1 and 2 show 2D hcb layers, which can be further extended into a 3D supramolecular framework via classic hydrogen bonding interactions. 3 features a 1D double chain that ultimately spreads into a 2D network through weak hydrogen bonding interactions. With the advantages of high stability and excellent luminescent properties, the three CPs display high sensitivity, selectivity, and good anti-interference for the sensing of pefloxacin (PEF) and Cr2O72- ions (LOD values toward PEF: 3.82 × 10-7 mol L-1 for 1, 4.06 × 10-7 mol L-1 for 2, and 1.36 × 10-8 mol L-1 for 3, and toward Cr2O72- ions: 5.97 × 10-7 mol L-1 for 1, 5.87 × 10-7 mol L-1 for 2, and 8.21 × 10-8 mol L-1 for 3). These CPs are the first examples of bifunctional luminescent sensors to detect PEF and Cr2O72- in aqueous solutions. The luminescence quenching mechanisms are explored in detail.

Naphthalene derived Schiff base as a reversible fluorogenic chemosensor for aluminium ions detection

Schiff base (HNPD) was achieved by reacting 2-hydroxy-1-naphthaldehyde with N-phenyl-o-phenylenediamine in enthanol medium. The spectroscopic analyses were done to establish the formation of Schiff base apparently. Further, synthesized Schiff base conjugate was successfully used as a fluorogenic chemosensor to detect aluminium ions (Al3+) with high fluorescence amplification among the other interfering various metal ions. The limit of detection of 0.0248 × 10-6 M and a binding constant of 6.19 × 103 M-1 were obtained by the receptor HNPD for Al3+ detection. A high influence of intramolecular charge transfer kinetics was established to realize the selective responsiveness towards Al3+ ions. Density functional theory approximation formulated the band energy modulation and localization and delocalization of electron density for the HNPD and Al3+ complexation. The developed sensor ultimately inspected on the real soil and water samples and ascertained the practical ability of Al3+ ions detection of HNPD chemosensor.

Two isostructural Zn/Co-MOFs with penetrating structures: multifunctional properties of both luminescence sensing and conversion of CO2 into cyclic carbonates

Two new metal-organic frameworks (MOFs), namely, {[Zn(HL)(bpea)]·DMF}n (Zn-MOF-1) and {[Co(HL)(bpea)]·DMF}n (Co-MOF-2) (H3L = 3-(3,5-dicarboxybenzyloxy)benzoic acid, bpea = 1,2-di(pyridyl)ethane), were obtained by the reaction of H3L and N-containing ligand bpea with Zn(NO3)2·6H2O and Co(NO3)2·6H2O, respectively. The isomorphic Zn-MOF-1 and Co-MOF-2 featured a 3D penetrating framework with different stabilities, luminescence, and catalytic properties. Luminescence measurement indicated that Zn-MOF-1 could be used to detect Al3+ through a turn-on effect with a detection limit of 0.42 μM. The sensing mechanism experiments showed that the enhanced luminescence of Zn-MOF-1 toward Al3+ may be due to the weak interaction between Al3+ and Zn-MOF-1 and the absorbance-caused enhancement (ACE) mechanism. Meanwhile, both Zn-MOF-1 and Co-MOF-2 showed interesting CO2 adsorption properties and could catalyze the cycloaddition of CO2 to epoxides resulting in 96 and 92% ideal products within 12 hours, respectively. They can be cycled up to 5 times without significant loss of catalytic efficiency.

A dual-functional fluorescence probe CDs@ZIF-90 for highly specific detection of Al3+ and Hg2+ in environmental water samples

In recent years, the escalating water pollution has resulted in serious harm to human health and ecological environment due to the excessive discharge of toxic metal ions such as Al3+ and Hg2+. Therefore, it is crucial to develop a simple, efficient, and rapid detection method for monitoring the levels of the metal ions in water environment to ensure public health and ecological safety. In this study, carbon dots (CDs) containing heteroatom Si were successfully synthesized by the solvothermal method. Subsequently, a novel dual-functional fluorescent sensor (CDs@ZIF-90) was constructed by integrating CDs with zeolitic imidazolate framework-90 (ZIF-90). The fluorescent composite CDs@ZIF-90 showed outstanding optical properties and excellent structural and luminescence stability in aqueous medium. Particularly, its fluorescence at 453 nm can be remarkably enhanced by Al3+ and quenched upon exposure to Hg2+. As a result, the CDs@ZIF-90 was applied in sensitive and selective determination of Al3+ and Hg2+ ions with wide linear ranges (1-200 μM and 0.05-240 μM) and low detection limits (0.81 μM and 19.6 nM). Moreover, a convenient and rapid fluorescence test strip was also successfully prepared for visual detection of Al3+ and Hg2+ ions. This work is the first try to use the CDs@ZIF-90 fluorescence sensing material for highly sensitive and selective determination of Al3+ and Hg2+ based on "turn-on" and "turn-off" dual modes, respectively and it provides a new idea for monitoring quality of drinking water and environmental water. It is of great significance for human health and environmental protection.

A Tb3+ ion encapsulated anionic indium-organic framework as logical probe for distinguishing quenching Fe3+ and Cu2+ ions

We successfully synthesized a stable anionic microporous metal-organic framework (MOF) HDU-1 ([Me2NH2]2In2[(TATAB)4(DMF)4](DMF)4(H2O)4) and constructed a fluorescent probe Tb@HDU-1 by an exchange strategy. Because of its suspension distinct fluorescent response of Tb(III) characteristic transition and ligand emission, the Tb@HDU-1 can be used as fluorescent probe for sensing towards Fe3+ and Cu2+ ions. It is surprising that Tb@HDU-1 is used as a ratiometric fluorescent probe for Cu2+ ions while only single peak detection for Fe3+ ions, which describes a particular rare example of a sensor based on Ln-MOFs to distinguish quenching Fe3+ and Cu2+ ions. Hence we designed a molecular logic gate device for making the distinction of Fe3+ and Cu2+ ions more clearly and appropriately. In addition, the different quenching effect between Fe3+ and Cu2+ ions may be ascribed to the differences of competitive absorption and interaction between frameworks and metal ions.

MOF-based nanocomposites as transduction matrices for optical and electrochemical sensing

Metal Organic Frameworks (MOFs), a class of crystalline microporous materials have been into research limelight lately due to their commendable physio-chemical properties and easy fabrication methods. They have enormous surface area which can be a working ground for innumerable molecule adhesions and site for potential sensor matrices. Their biocompatibility makes them valuable for in vitro detection systems but a compromised conductivity requires a lot of surface engineering of these molecules for their usage in electrochemical biosensors. However, they are not just restricted to a single type of transduction system rather can also be modified to achieve feat as optical (colorimetry, luminescence) and electro-luminescent biosensors. This review emphasizes on recent advancements in the area of MOF-based biosensors with focus on various MOF synthesis methods and their general properties along with selective attention to electrochemical, optical and opto-electrochemical hybrid biosensors. It also summarizes MOF-based biosensors for monitoring free radicals, metal ions, small molecules, macromolecules and cells in a wide range of real matrices. Extensive tables have been included for understanding recent trends in the field of MOF-composite probe fabrication. The article sums up the future scope of these materials in the field of biosensors and enlightens the reader with recent trends for future research scope.

Smart Stimulation Response of a Pyrene-Based Lanthanide(III) MOF: Fluorescence Enhancement to HX (F and Cl) or R-COOH and Artificial Applicable Film on HCl Vapor Sensing

Toxic acids produced by industries are major hazards to the environment and human health, and luminescent pyrene-based crystalline metal-organic frameworks (MOFs) demonstrate promising performance in the detection of toxic acids. Herein, two novel isostructural 3D porous lanthanide MOFs, H3O·[Ln3(TBAPy)2(μ2-H2O)2(OH)2]·2DMA·2Diox·6.5H2O (Ln = Pr (1) and Ce (2); H4TBAPy (1,3,6,8-tetrakis(p-benzoic acid)pyrene); and DMA: N,N-dimethylacetamide) were synthesized, which showed alb topology. Based on the protonation and hydrogen bond mechanism, complex 1 could be used as a fluorescence recognition sensor for HX (X = F, Cl, Br, and I) acid solutions with different luminescence behaviors. It is worth noting that complex 1 exhibited high sensitivity in the fluorescence enhancement sensing of hydrofluoric acid, oxalic acid, and trichloroacetic acid. In particular, complex 1 had a low limit of detection (LOD) for OA (0.1 μM) and was applied to real monitoring of orange fruit samples. In addition, the PVA@1 film could selectively, sensitively, and quantitatively respond to hydrochloric acid (HCl) vapor through fluorescent quenching; due to its protonation and adsorption capacity, the LOD was 0.18 ppm. Therefore, the portable optical device, the PVA@1 film, can detect HCl gas in trace amounts, achieving the ultimate goal of real-time and rapid detection, which has potential application value for industrial production safety.

Highly Stable Rare Earth Metal-Organic Frameworks for Fluorescence Recognition of Folic Acid, Proton Conduction, and Magnetic Refrigeration

Four new isostructural rare earth metal-organic frameworks (RE-MOFs) were synthesized and full characterized, namely, {[(CH)2NH2]3[RE2(BTDBA)2(HCOO)]·5H2O·2DMF}n (H4BTDBA = (4',4'''-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid); RE = Eu (JXUST-34), Gd (JXUST-35), Tb (JXUST-36), and Dy (JXUST-37)). The single-crystal structures analysis shows that JXUST-34-37 are chain-based three-dimensional structures. Importantly, JXUST-34 exhibits excellent water, organic solvents, and acid-base stability, which can be used as a fluorescence sensor for folic acid and Al3+ with detection limits of 0.02 mM and 0.05 μM, respectively. The presence of free [(CH)2NH2]+ cations in the channels can engage the proton carrier during proton conduction. JXUST-34-37 display good proton conductivity, and the conductivities vary with relative humidity and temperatures, among which JXUST-37 has the highest conductivity of 9.66 × 10-3 S·cm-1 at 60 °C and 98% RH. The magnetic studies show that the -ΔSm of JXUST-35 reaches 16.13 J kg-1 K-1 at 2 K and ΔH = 7 T. JXUST-34-37 show multifunctional properties of fluorescence sensing, high proton conductivity, and magnetic refrigeration, which provides a new clue for the development of fluorescent-responsive, magnetic-refrigerant, and proton-conductive RE-MOF materials.

Reversible and Turn-On Fluorescence Detection of Phosphate in Aqueous Solution and Living Cell Imaging by Supramolecular Metallacycles with AIE-Active Ligands

Luminescent supramolecular metallacycles have attracted great interest as a new promising class of sensing substrates. In this work, two tetraphenylethene (TPE)-based diimidazole and dipyrazole ligands with the aggregation-induced emission (AIE) feature were designed for the construction of supramolecular tetragonal metallacycles 1-4 with two 90° mononuclear [(bpy)M]2+ or dinuclear [(bpy)2M2]4+ acceptors (bpy = 2,2'-dipyridine; M = Pd, Pt), in which the fluorescence can be quenched to an "off" state due to the ligand-to-metal charge transfer (LMCT). Metallacycle 1 was utilized as a fluorescence sensor for phosphate (PO43-) detection in aqueous solution by means of disassembly, leading to the release of the ligand. Additionally, the metallacycle can be regenerated through self-assembly via the introduction of Pd(II) acceptors. PO43- was detected using TPE-based metallacycles over a wide concentration range, with a detection limit as low as 2.1 × 10-8 M. Furthermore, sensor 1 also presented the semiquantitative visual detection ability for PO43- in the test paper mode via fluorescence changes. The aforementioned studies not only enhance the current research on fluorescent materials but also offer a strategy for the creation of stimuli-responsive supramolecular coordination complexes.

A highly stable chain-based EuIII metal-organic framework as a turn-on and blue-shift luminescent sensor for dipicolinic acid

The development of a rapid and selective method for the identification of dipicolinic acid (DPA), a specific biomarker in Bacillus anthracis spores, is of great importance for the avoidance of anthrax infection. Herein, a chain-based Eu^III metal-organic framework with the formula {[Eu₃(BTDB)₃(μ₃-OH)₃(H₂O)]·solvents}_n (JXUST-38, H₂BTDB = (benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid) was obtained using 2-fluorobenzoic acid as the pH regulator. JXUST-38 exhibits good chemical and thermal stability and can specifically recognize DPA in N,N-dimethylformamide solution through luminescence enhancement and blue-shift effects with a detection limit of 0.05 μM. Furthermore, the significant luminescence enhancement and blue shift under UV lamps are obviously observable by the naked eye. The luminescence sensing mechanism is attributed to absorbance-induced enhancement between JXUST-38 and DPA. Test paper and mixed-matrix membrane based on JXUST-38 are designed for DPA detection. In addition, the feasibility of using JXUST-38 in biosensing is discussed in detail.

Tetra-Nuclear Cluster-Based Lanthanide Metal-Organic Frameworks as White Phosphor, Information Encryption, Self-Calibrating Thermometers, and Fe2+ Sensors

The application of one kind of metal-organic framework (MOF) material used in multiple fields is one of the most interesting research topics. In this work, four new tetra-nuclear cluster-based lanthanide metal-organic frameworks (LnMOFs) [Ln₂(BTDB)₃(DMA)(phen)]_n (Ln = Tb TbMOF, Eu EuMOF, Gd GdMOF, Tb_1.830Eu_0.170 Tb,EuMOF, 3,5-bis(trifluoromethyl)-4',4″-dicarboxytriphenylamine = H₂BTDB, 1,10-phenanthroline = phen) are obtained based on the ligand of H₂BTDB that is synthesized in our laboratory, and the precise single-crystal structure of H₂BTDB is obtained for the first time. The white phosphor was obtained by facilely hybridizing two components of the orange-yellow emission phosphor of Tb,EuMOF and the blue luminescence material of triphenylamine according to the trichromatic theory. At the same time, TbMOF, EuMOF, Tb,EuMOF, and the white phosphor can be used for information encryption, demonstrating their potential application in the field of anti-counterfeiting. Tb,EuMOF is also a multi-mode and self-calibrating thermometer within a broad temperature range of 110-300 K. Further studies show that EuMOF is a rapid response sensor for Fe²⁺, with a very low limit of detection of 2.0 nM, which is much lower than the national standards for Fe²⁺ (GB 5749-2005, 5.357 μM). It can achieve strong anti-interference detection of Fe²⁺ in actual samples of tap water and lake water. In addition, EuMOF can also be made into an easy-to-use sensing device of test paper for real-time and visual sensing of Fe²⁺.

Stable Lanthanide-Organic Frameworks: Crystal Structure, Photoluminescence, and Chemical Sensing of Vanillylmandelic Acid as a Biomarker of Pheochromocytoma

Several isostructural lanthanide metal-organic frameworks, viz. [Ln(DCHB)_1.5phen]_n (Ln-MOFs, where Ln = Eu for 1, Tb for 2, Sm for 3 and Dy for 4), are successfully synthesized through the hydrothermal reactions of 4'-di(4-carboxylphenoxy)hydroxyl-2, 2'-bipyridyl (H₂DCHB) and lanthanide nitrates as well as chelator 1,10-phenantroline (phen). These structures are characterized by single-crystal X-ray diffraction, and the representative Ln-MOF 1 is a fivefold interpenetrated framework with the uncoordinated Lewis base N sites form DCHB^2- ligands. The photoluminescence research studies reveal that Ln-MOFs 1-4 exhibit characteristic fluorescent emissions from ligand-induced lanthanide Ln(III) ions, while the single-component emission spectra of Ln-MOF 4 are all located in a white region under different excitations. The absence of coordinated water and the interpenetration property of the structures are conducive to the structure rigidity, and the results display that Ln-MOF 1 has high thermal/chemical stabilities in common solvents and a wide pH range as well as the boiling water. Notably, luminescent sensing studies reveal that Ln-MOF 1 with prominent fluorescence properties can perform in highly sensitive and selective sensing of vanillylmandelic acid (VMA) in aqueous systems (K_SV = 562.8 L·mol^-1; LOD = 4.6 × 10^-4 M), which can potentially establish a detection platform for the diagnosis of pheochromocytoma via multiquenching mechanisms. Moreover, the 1@MMMs sensing membranes comprised of Ln-MOF 1 and a poly(vinylidene fluoride) (PVDF) polymer can also be facilely developed for VMA detection in aqueous media, suggesting the enhanced convenience and efficiency of practical sensing applications.

SCSC Transformation and Post-Synthesis Modification of MOFs with Proton Conduction and Ratiometric Fluorescence-Sensing Properties

The modification of metal-organic framework (MOF) materials to facilitate their practical applications is an extremely challenging and meaningful topic. In this work, two stepwise modification strategies for MOFs were conducted. First, we have demonstrated a single-crystal-to-single-crystal (SCSC) transformation from a microporous three-dimensional (3D) MOF to a two-dimensional (2D) coordination polymer (CP). The centrosymmetric [Cd(3-bpdb)(MeO-ip)]_n (1) transforms into a chiral [Cd₂(3-bpdb)(MeO-ip)₂(CH₃OH)₂]_n (2), which is triggered by the reaction time with methanol that acts as a structure-directing agent. The conversion relationship of 1 to 2 at different reaction times was studied in detail. Density functional theory (DFT) calculations clearly state that the irreversible formation of 2 is thermodynamically favorable. Intriguingly, 2 exhibits good proton conduction of 1.34 × 10^-3 S cm^-1 under 363 K and 98% relative humidity (RH) due to unique H-bond network characteristics. To the best of our knowledge, there are very few cases of 3D to 2D SCSC transformation stimulated by reaction time. The results have important implications for understanding the SCSC transformation mechanism and synthetic chemistry. On the other hand, the lanthanide³⁺-functionalized hybrids (Ln³⁺-MOF), Ln³⁺@1, were continuously prepared by incorporating luminescent Ln³⁺ ions into the structure of 1 through encapsulating post-synthesis modification (PSM). Tb³⁺@1 exhibits double emission in water and shows visual ratiometric fluorescence behavior for sensing glutamic acid (Glu), tryptophan (Trp), and Al³⁺, which is more reliable and accurate than single emission. Our work may not only provide new insights into the multiple modification of MOF materials but also promote the practical application of such materials.

Highly pH-Responsive Sensor Based on a EuIII Metal-Organic Framework with Efficient Recognition of Arginine and Lysine in Living Cells

A lanthanide-based three-dimensional metal-organic framework with excellent water, acid/base, and solvent stability, namely {[(CH3)2NH2]0.7[Eu2(BTDBA)1.5(lac)0.7(H2O)2]·2H2O·2DMF·2CH3CN}n (JXUST-29, H4BTDBA = 4',4‴-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis([1,1'-biphenyl]-3,5-dicarboxylic acid), Hlac = lactic acid), has been synthesized and characterized. Since the N atoms of the thiadiazole group will not coordinate with lanthanide ions, JXUST-29 has a free basic N-site accessible to small H+ ions, which allows it to be used as a promising pH fluorescence sensor. Interestingly, the luminescence signal was significantly enhanced, with an approximately 54-fold enhancement in the emission intensity when the pH value was increased from 2 to 5, which is the typical behavior of pH probes. In addition, JXUST-29 can also be used as a luminescence sensor to detect l-arginine (Arg) and l-lysine (Lys) in an aqueous solution through fluorescence enhancement and the blue-shift effect. The detection limits were 0.023 and 0.077 μM, respectively. In addition, JXUST-29-based devices were designed and developed to facilitate detection. Importantly, JXUST-29 is also capable of detecting and sensing Arg and Lys in living cells.

Solvothermal synthesis and device fabrication of a Eu3+-based metal-organic framework as a turn-on and blue-shift fluorescence sensor toward Cr3+, Al3+ and Ga3

A novel three-dimensional Eu³⁺-based metal-organic framework with the formula {[(CH₃)₂NH₂][Eu(BTDI)]·H₂O·DMF}_n (JXUST-25) was prepared by solvothermal method based on Eu³⁺ and 5,5'-(benzothiadiazole-4,7-diyl)diisophthalic acid (H₄BTDI) with benzothiadiazole (BTD) luminescent groups. Due to the presence of Eu³⁺ and organic fluorescence ligand, JXUST-25 displays turn-on and blue-shift fluorescence toward Cr³⁺, Al³⁺ and Ga³⁺ with limits of detection (LOD) of 0.073, 0.006 and 0.030 ppm, respectively. Interestingly, the alkaline environment can change the fluorescence of JXUST-25 toward Cr³⁺/Al³⁺/Ga³⁺ and the addition of HCl solution realizes the reversible change of the fluorescence of JXUST-25 toward Cr³⁺/Al³⁺/Ga³⁺. It is noteworthy that the fluorescent test paper and light-emitting diode lamp based on JXUST-25 can effectively detect Cr³⁺, Al³⁺ and Ga³⁺ by the visual changes. In addition, the turn-on and blue-shift fluorescence between JXUST-25 and M³⁺ ions may be caused by the host-guest interaction and the absorbance caused enhancement mechanism.

Controllable Synthesis of TbIII Metal-Organic Frameworks with Reversible Luminescence Sensing for Benzaldehyde Vapor

Two novel lanthanide metal-organic frameworks (MOFs) with the formulas [Tb(bidc)(Hbidc)(H₂O)]_n (JXUST-20) and {[Tb₃(bidc)₄(HCOO)(DMF)]·solvents}_n (JXUST-21) were synthesized based on 2,1,3-benzothiadiazole-4,7-dicarboxylic acid (H₂BTDC) under solvothermal conditions. Interestingly, benzimidazole-4,7-dicarboxylic acid (H₂bidc) was formed in situ using H₂BTDC as the starting material. The self-assembly process of the targeted MOFs with different topological structures can be controlled by the solvents and concentration of the reactants. Luminescence experiments show that JXUST-20 and JXUST-21 exhibit strong yellow-green emission. JXUST-20 and JXUST-21 can selectively sense benzaldehyde (BzH) via a luminescence quenching effect with detection limits of 15.3 and 1.44 ppm, respectively. In order to expand the practical application of MOF materials, mixed-matrix membranes (MMMs) have been constructed by mixing targeted MOFs and poly(methyl methacrylate) in a N,N-dimethylformamide (DMF) solution, which can also be used for BzH vapor sensing. Therefore, the first case of MMMs derived from Tb^III MOFs has been developed for the reversible detection of BzH vapor, providing a simple and efficient platform for the future detection of volatile organic compounds.

Detection of heavy metal ion in real samples with fiber based paper based on new rare earth cluster

Chromium (Cr) is an important material, but also one of the most toxic heavy metal pollutants, showing great threat to human health and ecological environment, thus, accurate and rapid detection of Cr³⁺ has far-reaching significance. In this work, based on the ligand of 2,3,4,5,6-pentafluorobenzoic acid (HPFBA) that does not contains oscillation effect group such as "CH, OH, and NH bond", three rare earth dinuclear cluster of Ln₂(PFBA)₆(phen)₂(H₂O)₂ (Ln = Tb³⁺1-Tb, Eu³⁺1-Eu, Gd³⁺1-Gd, phen = 1,10-phenanthroline) were obtained. 1-Tb shows excellent stability and luminescence properties. In depth investigation reveals that 1-Tb shows quick detection towards Cr³⁺ in water through luminescence "turn-off", with extremely short response time of 1.0 min, very low limit of detection (LOD) of 5.2 ppb and no interference from other ions. The LOD value is much lower than the total content of chromium for water in China (15 ppm, GB9078-1996). In the actual environment such as tap water, lake water, human, and serum, 1-Tb shows excellent detection and recovery rate for Cr³⁺. More interestingly, a fiber based paper of test paper that based on 1-Tb and ordinary filter paper was fabricated, which can probe Cr³⁺ by visible color changes to the naked eye under UV light.

Two Co-Based Metal-Organic Framework Isomers with Similar Metal-Carboxylate Sheets: Turn-On Ratiometric Luminescence Sensing Activities toward Biomarker N-Acetylneuraminic Acid and Discrimination of Ga3+ and In3

Two supramolecular Co-MOF isomers, namely, {[Co(L)_0.5(m-bimb)]·3H₂O}_n (LCU-115) and {[Co(L)_0.5(p-bimb)]·3H₂O}_n (LCU-116), were synthesized from an amide-containing carboxylic acid N,N″-(3,5-dicarboxylphenyl)benzene-1,4-dicarboxamide (H₄L) and two flexible positional isostructural N-containing ligands m-bimb and p-bimb (m-bimb = 1,3-bis((1H-imidazol-1-yl)methyl)benzene; p-bimb = 1,4-bis((1H-imidazol-1-yl)methyl)benzene). The carboxylate ligands connect Co(II) centers to form 2D metal-carboxylate sheets, which are extended further by m-bimb and p-bimb to form a 2D bilayer with parallel stacking (LCU-115) and a 3D framework (LCU-116), respectively. Luminescence measurements indicated that these two complexes exhibited interesting multiresponsive sensing activities toward pH, biomarker N-acetylneuraminic acid, and trivalent cations Ga³⁺/In³⁺. They show highly sensitive turn-on fluorescence responses in the acidic range and can also be regarded as on-off-on vapoluminescent sensors to typical acidic and basic gases HCl and Et₃N. It is worth noting that these complexes have excellent turn-on ratiometric fluorescence sensing ability for N-acetylneuraminic acid (NANA) with detection limits as low as 7.39 and 8.06 μM, respectively. Furthermore, they were successfully applied for the detection of NANA in simulated urine and serum samples with satisfactory results. For ion detection, LCU-116 could detect both Ga³⁺ and In³⁺, while LCU-115 could distinguish Ga³⁺ from In³⁺ with the latter showing luminescence quenching. The sensing mechanism was investigated in detail by XRD, UV-vis, EDS, XPS, SEM, and TEM. The results of interday and intraday precision studies gave low RSD values in the range of 1.19-3.53%, ascertaining the reproducibility of these sensors. The recoveries for the sensing analytes in simulated urine/serum or real water are satisfactory from 96.7 to 103.3% (toward NANA) and 96.6 to 115.0% (toward Ga³⁺ and In³⁺), indicating that these two complexes also possess acceptable reliability for monitoring in real samples. The results indicated that the supramolecular isomers LCU-115 and LCU-116 are promising material candidates for application in biological and environmental monitoring.

Selective recognition of Hg2+ ions in aqueous solution by a CdII-based metal-organic framework with good stability and vacant coordination sites

A novel water-stable Cd^II-based metal-organic framework, namely {[Cd(BIBT)(TDC)]·2H₂O}_n (JXUST-28, BIBT = 4,7-bi(1H-imidazol-1-yl)benzo-[2,1,3]thiadiazole and H₂TDC = 2,5-thiophenedicarboxylic acid), was synthesized using a mixed-ligand strategy. Structural analysis demonstrates that JXUST-28 exhibits a two-dimensional layer structure with 4-connected sql topology. Intriguingly, JXUST-28 presents good stability in boiling water (at least 5 days), common organic solvents and aqueous solutions with different pH values of 2-12 (more than 24 hours). Furthermore, fluorescence experiments revealed that JXUST-28 could sense Hg²⁺ ions in aqueous solution via a quenching effect with a detection limit of 0.097 μM. Meanwhile, JXUST-28 can also be regenerated at least 5 times to detect Hg²⁺ ions. In addition, light-emitting diode lamps, luminescent films, and test papers of JXUST-28 have been successfully developed for practical applications.

Coordinate Anchoring of Mixed Luminophores in Two Isostructural Hybrid Layers to Achieve Tunable Room-Temperature Phosphorescence

Room-temperature phosphorescence (RTP) materials have widespread applications in biological imaging, anticounterfeiting, and optoelectronic devices. Because of the predesignability of metal-organic complexes (MOCs), the RTP materials based on MOC systems have received huge attention from researchers. The coordinate anchoring of luminophores to enhance the rigidity of organic molecules and restrict the nonradiative transition offers opportunities for generating MOC materials with captivating RTP performance. Hitherto, most of the MOC-based RTP materials feature a single luminophore ligand. The development of new MOC systems with RTP functionality is still challenging. Herein, we use the mixed-ligand synthetic strategy to produce isostructural MOCs, [Zn(TIMB)(X₂-TPA)]·H₂O (1, X = Cl; 2, X = Br; TIMB = 1,3,5-tris(2-methyl-1H-imidazol-1-yl)benzene; H₂-X₂-TPA = 2,5-dichloroterephthalic and 2,5-dibromoterephthalic acid), and modulate the RTP properties of resultant products via the synergy of coordinate anchoring and substitution synthesis. 1 and 2 feature similar coordination layers composed of neutral TIMB and anionic X₂-TPA^2- ligands, which provide a good structural model to tune the RTP performances of final products via substitution synthesis. Different from the reported RTP materials based on MOC systems, our study provides a general way to build and modulate MOC-based RTP materials with the assistance of coordinate anchoring and substitution synthesis strategies.

A new zinc-organic framework with 1D channel for constructing a ratiometric Al3+-selective sensor and four inputs INHIBIT logic gate

To develop Al³⁺ fluorescent sensor is significant because the abnormal levels of Al³⁺ in environment may pose great threat to human body. Herein, a novel metal-organic framework {Zn(Dpada)(Imdba)·H₂O}_n (Dpada = 3, 6-di(1H-imidazol-1-yl) pyridazine and Imdba = 2, 2'-iminodibenzoic acid), named Zn-MOF, has been architected with one-dimensional channel under hydrothermal conditions. Zn-MOF exhibits good thermal and solvent stability and can also keep structural integrity over the pH range of 5.0 - 9.0. Fluorescent experiments show that Zn-MOF has high selectivity and sensitivity towards Al³⁺ via ratiometric fluorescence signal changes (F_{470 nm}/F_{390 nm}) and the detection limit is evaluated to be 0.69 μM. In addition, Zn-MOF performs good recyclability in sensing of Al³⁺ with at least 5 cycles. Besides, an INHIBIT logic gate has been constructed with chemical ions (Al³⁺, Cr³⁺, Fe³⁺ and Hg²⁺) as input signals and emission ratio (F_{470 nm}/F_{390 nm}) as output signal. Significantly, Zn-MOF can be applied to tracing Al³⁺ using real water samples, presenting great potential in water quality monitoring application.

Anionic lanthanide metal-organic frameworks with magnetic, fluorescence, and proton conductivity properties and selective adsorption of a cationic dye

Two novel microporous anionic lanthanide metal-organic frameworks (Ln-MOFs), namely {[(CH₃)₂NH₂][Ln(bptc)]·2H₂O}_n (Ln = Gd (1) and Dy (2), H₄bptc = biphenyl-3,3',5,5'-tetracarboxylic acid) with a new 4,8-connected topology have been synthesized and structurally characterized. Ln-MOF 1 shows a significant magnetocaloric effect with -ΔSmaxm = 26.37 J kg^-1 K^-1 at 2 K for ΔH = 7 T, and a high proton conductivity of 1.02 × 10^-4 S cm^-1 at 323 K and 90% RH. Moreover, Ln-MOF 1 shows specific selective adsorption of the cationic dye Rhodamine B. Ln-MOF 2 exhibits field-induced slow magnetic relaxation with an energy barrier (U_eff) of 48.19 K, characteristic emission of Dy³⁺, and selective adsorption of Rhodamine B. Therefore, 2 is a multifunctional Ln-MOF with magnetic, fluorescence and selective adsorption properties.

Reversible Structural Transformation and Catalytic Potential of Lanthanide-Azobenzenetetracarboxylates

Inspired by the catalytic potential of lanthanide coordination polymers of 3,3',5,5'-azobenzenetetracarboxylic acid (H₄abtc), two new isostructural [Ln₂^III(Habtc)₂(DMSO)₄]·DMSO·H₂O (Ln^III = Sm^III (I), Eu^III = (II), DMSO = dimethyl sulfoxide) were synthesized and characterized. Their single-crystal structures were elucidated and described. Structural transformations of II in the solid state prompted by ligand substitution and thermal treatment were studied, from which genuine reversible transformation of II to [Eu^III(Habtc)(H₂O)₄]·3H₂O (II') and [Eu^III(Habtc)(H₂O)₂]·2H₂O (II″) was revealed. This illustrates the rare case of reversible transformation in lanthanide coordination polymers. The transformation between II' and II″ was also investigated. Structural transformations among these frameworks are discussed with regard to the coordination environment of Eu^III, coordination modes of Habtc^3-, and similarities and disparities in framework architecture and registration. In addition, the catalytic performance of II with and without the prior activation in CO₂ cycloaddition reaction with epichlorohydrin was studied in comparison with II' and II″. The excellent performance of II disregarding the activation process has been demonstrated with the maximum turnover number and turnover frequency of 7682 and 1921 h^-1, respectively, for the activated II and 7142 and 1786 h^-1, respectively, for the nonactivated II. The maintenance of the catalytic efficiency over 10 cycles of the catalysis and the regeneration process is illustrated and discussed with respect to structural transformation.

Turn-on and blue-shift fluorescence sensor toward L-histidine based on stable CdII metal-organic framework with tetranuclear cluster units

A novel Cd^II-based two-fold interpenetrated metal-organic framework (MOF), namely {[Cd₂(BTDB)₂(4,4-bpy)]·DMF}_n (JXUST-14), (H2BTDB = 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid and 4,4-bpy = 4,4-bipyridine), has been prepared and characterized. Single-crystal structure determination reveals that JXUST-14 has a tetranuclear cluster based 6-connected pcu topological network with Schlafli symbol {4¹²·6³}. When soaked in common organic solvents and aqueous solutions with diverse pH values of 2-12 for 48 h, JXUST-14 remains stable. JXUST-14 is a highly selective and sensitive luminescent sensor for L-histidine (His) with a detection limit of 11.1 ppm. JXUST-14 is the first Cd^II-based MOF for the detection of His via turn-on and fluorescence blue-shift effects. Experimental study and theoretical calculation suggest that the sensing process can be mainly attributed to a charge transfer and energy transfer mechanism. More interestingly, LED lamps of JXUST-14 and JXUST-14@His were successfully developed, which endowed efficient sensitivity for His detection and thus provide great potential for future applications.

Current status and future prospects of nanoscale metal–organic frameworks in bioimaging

The importance of diagnosis and in situ monitoring of lesion regions and transportation of bioactive molecules has a pivotal effect on successful treatment, reducing side effects, and increasing the chances of survival in the case of diseases.

Lanthanide-based metal-organic framework materials as bifunctional fluorescence sensors toward acetylacetone and aspartic acid

A family of novel lanthanide-based metal-organic frameworks (Ln-MOFs) with bifunctional fluorescence sensing, namely {[(CH3)2NH2]5[Ln5(TBAPy)5]•solvent}n (Ln = Gd (1), Tb (2), and Dy (3), H4TBAPy = 1,3,5,7-tetra(4-carboxybenzene)pyrene), have been synthesized and...