In Situ Self-Assembled ZIF-67/MIL-125-Derived Co3O4/TiO2 p-n Heterojunctions for Enhanced Photocatalytic CO2 Reduction

Integrating bimetallic borides with g-C3N4 containing cyanamide defects for efficient photocatalytic nitrogen fixation

The sustainable generation of ammonia by photocatalytic nitrogen fixation under mild conditions is fascinating compared to conventional industrial processes. Nevertheless, owing to the low charge transfer efficiency, the insufficient light absorption capacity and limited active sites of the photocatalyst cause the difficult adsorption and activation of N2 molecules, thereby resulting in a low photocatalytic conversion efficiency. Herein, a novel bimetallic CoMoB nanosheets (CoMoB) co-catalyst modified carbon nitride with dual moiety defects (CN-TH3/3) Schottky junction photocatalyst is designed for photocatalytic nitrogen reduction reaction (NRR). The photocatalytic nitrogen reduction rate of the optimized CoMoB/CN-TH3/3 photocatalyst is 4.81 mM·g-1·h-1, which is 6.2 and 2.2 times higher than carbon nitride (CN) (0.78 mM·g-1·h-1) and CN-TH3/3 (2.21 mM·g-1·h-1), respectively. The excellent photocatalytic NRR performance is ascribed not only to the introduction of dual moiety defects (cyano and cyanamide groups) that extends the visible light absorption range and promotes exciton polarization dissociation, but also to the formation of interfacial electric field between CoMoB and CN-TH3/3, which effectively facilitates the interfacial charge transfer. Thus, the synergistic interaction between CN-TH3/3 and CoMoB further increases the electron numble of CoMoB active sites, which effectively strengthens the adsorption and activation of N2 and weakens the NN triple bond, thereby enhancing the photocatalytic NRR activity. This work highlights the introduced dual moiety defects and bimetallic CoMoB co-catalyst to synergistically enhance the photocatalytic nitrogen reduction performance.

Efficient ofloxacin degradation via peroxymonosulfate activation using an S-scheme MoS2/Co3O4 heterojunction composite under visible light: Performance and mechanistic insights

Sulfate-radical-mediated photocatalysis technology peroxymonosulfate (PMS) activation via visible light irradiation shows great promise for water treatment applications. However, its effectiveness largely depends on the bifunctional performance of photocatalysis and PMS activation provided by the catalysts. In this study, we successfully synthesized a novel S-scheme MoS2/Co3O4 (MC) heterojunction composite by a hydrothermal method and employed it for the first time to activate PMS for ofloxacin (OFX) degradation under visible light irradiation. The MC-5/PMS/Vis system achieved an impressive 85.11% OFX degradation efficiency within 1 min and complete OFX removal within 15 min under optimal conditions, with an apparent first-order kinetics rate constant of 0.429 min-1. Reactive species trapping experiments and electron spin resonance analysis identified 1O2, h+, and •O2- as the primary active species responsible for OFX degradation. Photoelectrochemical analyses and density functional theory calculations indicated the formation of a built-in electric field between MoS2 and Co3O4, which enhanced the separation and migration of photoinduced carriers. Additionally, the Co-Mo interaction further increased the yield of dominant reactive species, thereby boosting photocatalytic activity. This work underscores the potential of visible-light-assisted PMS-mediated photocatalysis using Co3O4-based catalysts for effective pollutant control.

Enhancing photocatalytic CO2 reduction with TiO2-based materials: Strategies, mechanisms, challenges, and perspectives

The concentration of atmospheric CO2 has exceeded 400 ppm, surpassing its natural variability and raising concerns about uncontrollable shifts in the carbon cycle, leading to significant climate and environmental impacts. A promising method to balance carbon levels and mitigate atmospheric CO2 rise is through photocatalytic CO2 reduction. Titanium dioxide (TiO2), renowned for its affordability, stability, availability, and eco-friendliness, stands out as an exemplary catalyst in photocatalytic CO2 reduction. Various strategies have been proposed to modify TiO2 for photocatalytic CO2 reduction and improve catalytic activity and product selectivity. However, few studies have systematically summarized these strategies and analyzed their advantages, disadvantages, and current progress. Here, we comprehensively review recent advancements in TiO2 engineering, focusing on crystal engineering, interface design, and reactive site construction to enhance photocatalytic efficiency and product selectivity. We discuss how modifications in TiO2's optical characteristics, carrier migration, and active site design have led to varied and selective CO2 reduction products. These enhancements are thoroughly analyzed through experimental data and theoretical calculations. Additionally, we identify current challenges and suggest future research directions, emphasizing the role of TiO2-based materials in understanding photocatalytic CO2 reduction mechanisms and in designing effective catalysts. This review is expected to contribute to the global pursuit of carbon neutrality by providing foundational insights into the mechanisms of photocatalytic CO2 reduction with TiO2-based materials and guiding the development of efficient photocatalysts.

Manipulation of Electronic Effect and Assembly Architecture to Invoke Oxidation of Ethylbenzene by Hierarchical Co3O4 Wreaths

A high-performance transition-metal oxide catalyst can be designed by appropriately integrating the concepts of morphology regulation and electronic structure modulation. In this work, hierarchical Co3O4 wreaths (CCW) enriched with oxygen vacancies (Ov) were facilely constructed for the selective oxidation of ethylbenzene (EB) to acetophenone (AP). Under the screened optimal reaction conditions, the CCW catalyst can offer a 79.1% conversion of EB (ri = 0.244 mol gcat-1 h-1) accompanied by a selectivity of 92.3% to AP. The good reaction performance can be attributed to the cooperation of defect engineering and architecture design, which can synergistically facilitate the EB oxidation performance by augmenting the intrinsic reactivity and accessibility of active sites. This work presents a reliable route to construct a high-performance transitional metal oxide catalyst via manipulation of electronic effect and assembly architecture for the selective oxidation of EB and beyond.

Ionic liquid post-modified carboxylate-rich MOFs for efficient catalytic CO2 cycloaddition under solvent-free conditions

The synthesis of cyclic carbonates through cycloaddition reactions between epoxides and carbon dioxide (CO2) is an important industrial process. Metal-Organic Frameworks (MOFs) have functional and ordered pore structures, making them attractive catalysts for converting gas molecules into valuable products. One approach to enhance the catalytic activity of MOFs in CO2 cycloaddition reactions is to create open metal sites within MOFs. In this study, the amino-functionalized rare earth Gd-MOF (Gd-TPTC-NH2) and its ionic liquid composite catalysts (Gd-TPTC-NH-[BMIM]Br) were synthesized using 2'-amino-[1,1':4',1''-terphenyl]-3,3'',5,5''-tetracarboxylic acid (H4TPTC-NH2) as the ligand. The catalytic performance of these two catalysts was observed in the cycloaddition reaction of CO2 and epoxides. Under the optimized reaction conditions, Gd-TPTC-NH-[BMIM]Br can effectively catalyze the cycloaddition reaction of a variety of epoxide substrates with good to excellent yields of cyclic carbonate products. Comparatively, epichlorohydrin and epibromohydrin, which possess halogen substituents, promote higher yields of cyclic carbonates due to the electron-withdrawing nature of Cl and Br substituents. Additionally, the Gd-TPTC-NH-[BMIM]Br catalyst demonstrated good recyclability and reproducibility, maintaining its catalytic activity without any changes in its structure or properties after five reuse cycles.

Synergistic Effects of the Ni3B Cocatalyst and N Vacancy on g-C3N4 for Effectively Enhanced Photocatalytic N2 Fixation

The photocatalytic fixation of N₂ is a promising technology for sustainable production of ammonia, while the unsatisfactory efficiency resulting from the low electron-transfer rate, narrow light absorption range, and limited active sites of the photocatalyst seriously hinder its application. Herein, we designed a noble metal-free Schottky junction photocatalyst constructed by g-C₃N₄ nanosheets with N vacancies (V_N-CN) and metallic Ni₃B nanoparticles (Ni₃B/V_N-CN) for N₂ reduction to ammonia. The ammonia yield rate over the optimized Ni₃B/V_N-CN is 7.68 mM g^-1 h^-1, which is 6.7 times higher than that of pristine CN (1.15 mM g^-1 h^-1). The superior photocatalytic N₂ fixation performance of Ni₃B/V_N-CN can be attributed not only to the formation of Schottky junctions between Ni₃B and V_N-CN, which facilitates the migration and separation of photogenerated electrons, but also to the incorporation of V_N into g-C₃N₄, which enhances visible light absorption and improves electrical conductivity. More importantly, Ni₃B nanoparticles can act as the cocatalyst, which provide more active sites for the adsorption and activation of N₂, thereby improving the N₂ reduction activity. This work provides an effective strategy of designing noble metal-free-based cocatalyst photocatalyst for sustainable and economic N₂ fixation.

Hollow Core-Shell Metal Oxide Heterojunctions for the Urinary Metabolic Fingerprint-Based Noninvasive Diagnostic Strategy

Urine is a preferred object for noninvasive diagnostic strategies. Urinary metabolic analysis is speculatively regarded as an ideal tool for screening diseases closely related to the genitourinary system in view of the intimate relationship between metabolomics and phenotype. Herein, we propose a urinary metabolic fingerprint-based noninvasive diagnostic strategy by designing hollow core-shell metal oxide heterojunctions (denoted as MOHs). With outstanding light absorption and electron-hole separation ability, MOHs aid in the extraction of high-performance urine metabolic fingerprints. Coupled with optimized machine learning algorithms, we establish a metabolic marker panel for accurate diagnosis of prostate cancer (PCa), which is the most common malignant tumor of the male genitourinary system, achieving accuracies of 84.72 and 83.33% in the discovery and validation sets, respectively. Furthermore, metabolite variations and related pathway analyses confirm the credibility and change correlation of key metabolic features in PCa. This work tends to advance the noninvasive diagnostic strategy toward clinical realities.

MOF-on-MOF-Derived Hollow Co3 O4 /In2 O3 Nanostructure for Efficient Photocatalytic CO2 Reduction

The photocatalytic transformation of carbon dioxide (CO₂ ) into carbon-based fuels or chemicals using sustainable solar energy is considered an ideal strategy for simultaneously alleviating the energy shortage and environmental crises. However, owing to the low energy utilization of sunlight and inferior catalytic activity, the conversion efficiency of CO₂ photoreduction is far from satisfactory. In this study, a MOF-derived hollow bimetallic oxide nanomaterial is prepared for the efficient photoreduction of CO₂ . First, a unique ZIF-67-on-InOF-1 heterostructure is successfully obtained by growing a secondary Co-based ZIF-67 onto the initial InOF-1 nanorods. The corresponding hollow counterpart has a larger specific surface area after acid etching, and the oxidized bimetallic H-Co₃ O₄ /In₂ O₃ material exhibits abundant heterogeneous interfaces that expose more active sites. The energy band structure of H-Co₃ O₄ /In₂ O₃ corresponds well with the photosensitizer of [Ru(bpy)₃ ]Cl₂ , which results in a high CO yield of 4828 ± 570 µmol h^-1  g^-1 and stable activity over a consecutive of six runs, demonstrating adequate photocatalytic performance. This study demonstrates that the rational design of MOF-on-MOF heterostructures can completely exploit the synergistic effects between different components, which may be extended to other MOF-derived nanomaterials as promising catalysts for practical energy conversion and storage.

Nanoclay-Modulated Interfacial Chemical Bond and Internal Electric Field at the Co3 O4 /TiO2 p-n Junction for Efficient Charge Separation

To achieve a high separation efficiency of photogenerated carriers in semiconductors, constructing high-quality heterogeneous interfaces as charge flow highways is critical and challenging. This study successfully demonstrates an interfacial chemical bond and internal electric field (IEF) simultaneously modulated 0D/0D/1D-Co₃ O₄ /TiO₂ /sepiolite composite catalyst by exploiting sepiolite surface-interfacial interactions to adjust the Co²⁺ /Co³⁺ ratio at the Co₃ O₄ /TiO₂ heterointerface. In situ irradiation X-ray photoelectron spectroscopy and density functional theory (DFT) calculations reveal that the interfacial Co²⁺ OTi bond (compared to the Co³⁺ OTi bond) plays a major role as an atomic-level charge transport channel at the p-n junction. Co²⁺ /Co³⁺ ratio increase also enhances the IEF intensity. Therefore, the enhanced IEF cooperates with the interfacial Co²⁺ OTi bond to enhance the photoelectron separation and migration efficiency. A coupled photocatalysis-peroxymonosulfate activation system is used to evaluate the catalytic activity of Co₃ O₄ /TiO₂ /sepiolite. Furthermore, this work demonstrates how efficiently separated photoelectrons facilitate the synergy between photocatalysis and peroxymonosulfate activation to achieve deep pollutant degradation and reduce its ecotoxicity. This study presents a new strategy for constructing high-quality heterogeneous interfaces by consciously modulating interfacial chemical bonds and IEF, and the strategy is expected to extend to this class of spinel-structured semiconductors.

In Situ Growth of Cs3Bi2Br9 Quantum Dots on Bi-MOF Nanosheets via Cosharing Bismuth Atoms for CO2 Capture and Photocatalytic Reduction

Given the global warming caused by excess CO₂ accumulation in the atmosphere, it is essential to reduce CO₂ by capturing and converting it to chemical feedstock using solar energy. Herein, a novel Cs₃Bi₂Br₉/bismuth-based metal-organic framework (Bi-MOF) composite was prepared via an in situ growth strategy of Cs₃Bi₂Br₉ quantum dots (QDs) on the surface of Bi-MOF nanosheets through coshared bismuth atoms. The prepared Cs₃Bi₂Br₉/Bi-MOF exhibits bifunctional merits for both the high capture and effective conversion of CO₂, among which the optimized 3Cs₃Bi₂Br₉/Bi-MOF sample shows a CO₂-CO conversion yield as high as 572.24 μmol g^-1 h^-1 under the irradiation of a 300 W Xe lamp. In addition, the composite shows good stability after five recycles in humid air, and the CO₂ photoreduction efficiency does not decrease significantly. The mechanistic investigation uncovers that the intimate atomic-level contact between Cs₃Bi₂Br₉ and Bi-MOF via the coshared atoms not only improves the dispersion of Cs₃Bi₂Br₉ QDs over Bi-MOF nanosheets but also accelerates interfacial charge transfer by forming a strong bonding linkage, which endows it with the best performance of CO₂ photoreduction. Our new finding of bismuth-based metal-organic framework/lead-free halide perovskite by cosharing atoms opens a new avenue for a novel preparation strategy of the heterojunction with atomic-level contact and potential applications in capture and photocatalytic conversion of CO₂.

Defect Engineering in CuSx/COF Hybridized Heterostructures: Synergistic Facilitation of the Charge Migration for an Efficacious Photocatalytic Conversion of CO2 into CO

The photocatalytic CO₂ reduction reaction (CO₂RR) provides an attractive approach to tackling environmental issues. To actualize the optimal catalytic efficiency, one efficacious strategy is to rationally modulate the charge migration for the adopted heterogeneous catalysts. Herein, by virtue of a one-step hydrothermal method, Cu₂S nanospheres and defect-rich Cu₂S (CuS_x) nanosheets are wrapped by a triazine-containing covalent framework (TP-TA COF), resulting in CuS_x/TP-TA and Cu₂S/TP-TA. Owing to the heterojunction construction that suppresses the carrier recombination, both hybridized structures present enhanced charge migration in comparison to that of their corresponding sulfides and COF constituents. It is worth emphasizing that CuS_x/TP-TA proffers a significantly greater photocurrent than Cu₂S/TP-TA. The subsequent photocatalytic reduction of CO₂ also exhibits an apparently higher CO evolution rate, about 2.8 times higher than the Cu₂S/TP-TA photocatalyst. The above evident improvement owes much to the heterostructure establishment between CuS_x and TP-TA COF, as well as the synergistic effect provided by the defect engineering for CuS_x, both of which are able to enhance the separation efficiency of photoinduced carriers. Our work sheds light on the rational construction of heterogeneous structures between organic and inorganic photocatalysts, which emphasizes the possible synergistic effect of defect centers for enhancing photocatalytic performance.

3D/2D Heterojunction Fabricated from RuS2 Nanospheres Encapsulated in Polymeric Carbon Nitride Nanosheets for Selective Photocatalytic CO2 Reduction to CO

Micro/nanostructure control of heterostructures is still a challenge for achieving high efficiency and selectivity of photocatalytic CO₂ conversion. In this work, a new three-dimensiona/two-dimensional (3D/2D) heterostructure is fabricated by encapsulating RuS₂ nanospheres in the interlayer of mesoporous polymeric carbon nitride (PCN) nanosheets based on an in situ growth and polymerization strategy. The unique microstructure of the obtained 3D/2D RuS₂/PCN heterojunction can effectively improve the transfer and separation efficiency of photogenerated charge carriers, reduce the mass transfer resistance of CO₂ toward active sites, and provide a confined reaction space, thus propelling the photocatalytic CO₂ reduction to CO with high selectivity. The CO yield over the optimal 5%-RuS₂/PCN sample reaches 4.2 and 2.8 times as high as that of single PCN and RuS₂ within 4 h, respectively. Furthermore, the plausible charge transfer mechanism and CO₂ reduction path are revealed by time-dependent in situ Fourier transform infrared (FT-IR) spectra combined with photophysical, electrochemical, and photoelectrochemical techniques and density functional theory (DFT) calculations. This work develops the microstructural engineering design strategy of PCN-based heterojunctions for selective photocatalytic CO₂ fuel conversion.

Boosting Interfacial Charge Transfer with a Giant Internal Electric Field in a TiO2 Hollow-Sphere-Based S-Scheme Heterojunction for Efficient CO2 Photoreduction

The construction of an S-scheme charge transfer pathway is considered to be a powerful way to inhibit charge recombination and maintain photogenerated carriers with high redox capacity to meet the kinetic requirements of the carbon dioxide (CO₂) photoreduction reaction. For an S-scheme heterojunction, an internal electric field (IEF) is regarded as the main driving force for accelerating the interfacial spatial transfer of photogenerated charges. Herein, we designed a TiO₂ hollow-sphere (TH)-based S-scheme heterojunction for efficient CO₂ photoreduction, in which WO₃ nanoparticles (WP) were applied as an oxidation semiconductor to form an intimate interfacial contact with the TH. The S-scheme charge transfer mode driven by a strong IEF for the TH/WP composite was confirmed by in situ X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy. As a result, abundant photogenerated electrons with strong reducing ability would take part in the CO₂ reduction reaction. The combination of surface photovoltage spectra and transient photocurrent experiments disclosed that the IEF intensity and charge separation efficiency of the fabricated TH/WP composite were nearly 16.80- and 1.42-fold higher, respectively, than those of the pure TH. Furthermore, sufficient active sites provided by the hollow-sphere structure also enhanced the kinetics of the catalytic reaction. Consequently, the optimized TH/WP composite showed a peak level of CO production of 14.20 μmol g^-1 in 3 h without the addition of any sacrificial agent. This work provides insights into the kinetic studies of the S-scheme charge transfer pathway for realizing high-performance CO₂ photoreduction.