Cation Templating and Electronic Structure Effects in Uranyl Cage Clusters Probed by the Isolation of Peroxide-Bridged Uranyl Dimers

Acyl-anchored metal-organic cages with interior cryptand-like recognition sites for selective removal of radioactive strontium(II)

Tailored design of organic linkers or metal nodes can introduce desirable functionalities into metal-organic cages (MOCs), significantly expanding their potential applications. In this study, we present a viable approach for engineering acyl-type metal nodes to create interior oxygen-rich sites within MOCs, enabling specific recognition of metal ions, including radioactive contaminants, while maintaining the structural integrity of the MOCs. A novel MOC featuring a uranyl-sealed calix[4]resorcinarene (C[4]R)-based multisite cavity, referred to as UOC, is synthesized as a prototype. In UOC, peroxide-bridged dimeric uranyl units at both ends of the coordination cage provide abundant oxygen sites for coordination, forming a cryptand-like cavity that facilitates efficient recognition and encapsulation of Sr2+ due to the size-matching effect. Additionally, hydrophobic binding cavities at both ends of UOC promote the co-inclusion of two different guest species. Inspired by the strong binding affinity of UOC for Sr2+, it is employed as a solid adsorbent for capturing low concentrations of Sr2+ in strontium-contaminated simulated groundwater. A removal efficiency of 99.7% for Sr2+ at an initial concentration as low as 0.013 mmol L-1 is achieved, demonstrating its significant potential for the selective removal of trace amounts of radioactive 90Sr2+. This work demonstrates the feasibility of incorporating acyl-type metal nodes into MOCs for the recognition and encapsulation of metal ions, offering a novel strategy for developing new MOC-based functional materials.

Formation of Uranyl Peroxide Compounds via Dissolution of Studtite, [(UO2)(O2)(H2O)2](H2O)2, in Ionic Liquids

Four uranyl peroxide compounds with novel structures were formed following the dissolution of studtite, [(UO2)(O2)(H2O)2](H2O)2, in imidazolium-based ionic liquids. The compounds were characterized using single crystal X-ray diffraction (SCXRD), powder X-ray diffraction (PXRD), Raman and infrared (IR) spectroscopy, and scanning electron microscopy (SEM) with energy-dispersive X-ray spectroscopy (EDS). The ionic liquids used in the experiments were 1-ethyl-3-methylimidazolium (EMIm) diethyl phosphate, EMIm ethyl sulfate, and EMIm acetate. Each of the four uranyl peroxide compounds contain components from the ionic liquids as terminal ligands on uranyl peroxide molecular units, bridging ligands in uranyl peroxide sheet structures, or charge balancing cations located in the interstitial space. The studtite dissolved in and reacted with the ionic liquids, producing unique crystal structures depending on the anionic component of the ionic liquid, the temperature at which the synthesis was performed, and the introduction of additional ionic species into the solution. This is the first report of studtite dissolving in and reacting with ionic liquids to form uranyl peroxide compounds, which has the potential to vastly increase the number of synthetic routes for the formation of uranyl peroxide clusters and uranyl peroxide cage clusters.

Prediction of Solution Behavior via Calorimetric Measurements Allows for Detailed Elucidation of Polyoxometalate Transformation

The solution behavior of a polyoxometalate cluster, LiNa-U₂₄Pp₁₂ (Li₂₄Na₂₄[(UO₂O₂)₂₄(P₂O₇)₁₂]) that consists of 24 uranyl ions, peroxide groups, and 12 pyrophosphate linkers, was successfully predicted based on new thermodynamic results using a calorimetric method recently described for uranyl peroxide nanoclusters (UPCs), molybdenum blues, and molybdenum browns. The breakdown of LiNa-U₂₄Pp₁₂ and formation of U₂₄ (Li₂₄[UO₂O₂OH]₂₄) was monitored in situ via Raman spectroscopy using a custom heating apparatus. A combination of analytical techniques confirmed the simultaneous existence of U₂₄Pp₁₂ and U₂₄ midway through the conversion process and U₂₄ as the single end product. The application of a molecular weight filter resulted in a complete and successful separation of UPCs from solution and, in conjunction with DOSY results, confirmed the presence of large intermediate cluster building blocks.

High-Temperature Synthesis of a Uranyl Peroxo Complex Facilitated by Hydrothermally In Situ Formed Organic Peroxide

Because H₂O₂ is thermally unstable, it seems to be difficult to synthesize peroxides at elevated temperatures. We describe here the in situ generation of peroxide that is incorporated in a new uranyl peroxo complex, HT-UPO1, through the hydrothermal treatment of uranyl nitrate at 150 °C in the presence of organic ligands. In this novel process, a highly conjugated aromatic carboxylate linker, (E)-4-[2-(pyridin-4-yl)vinyl]benzoic acid (HPyVB), plays a crucial role by inducing the reduction of oxygen in air to form peroxide in situ and coordinating with uranyl to promote the preferred formation of thermally stable HT-UPO1. This work expands our knowledge on the speciation and chemistry of uranyl peroxide compounds and also sheds light on the possibility of their synthesis under more harsh conditions.

Crystalline Peroxosolvates: Nature of the Coformer, Hydrogen-Bonded Networks and Clusters, Intermolecular Interactions

Despite the technological importance of urea perhydrate (percarbamide) and sodium percarbonate, and the growing technological attention to solid forms of peroxide, fewer than 45 peroxosolvates were known by 2000. However, recent advances in X-ray diffractometers more than tripled the number of structurally characterized peroxosolvates over the last 20 years, and even more so, allowed energetic interpretation and gleaning deeper insight into peroxosolvate stability. To date, 134 crystalline peroxosolvates have been structurally resolved providing sufficient insight to justify a first review article on the subject. In the first chapter of the review, a comprehensive analysis of the structural databases is carried out revealing the nature of the co-former in crystalline peroxosolvates. In the majority of cases, the coformers can be classified into three groups: (1) salts of inorganic and carboxylic acids; (2) amino acids, peptides, and related zwitterions; and (3) molecular compounds with a lone electron pair on nitrogen and/or oxygen atoms. The second chapter of the review is devoted to H-bonding in peroxosolvates. The database search and energy statistics revealed the importance of intermolecular hydrogen bonds (H-bonds) which play a structure-directing role in the considered crystals. H2O2 always forms two H-bonds as a proton donor, the energy of which is higher than the energy of analogous H-bonds existing in isostructural crystalline hydrates. This phenomenon is due to the higher acidity of H2O2 compared to water and the conformational mobility of H2O2. The dihedral angle H-O-O-H varies from 20 to 180° in crystalline peroxosolvates. As a result, infinite H-bonded 1D chain clusters are formed, consisting of H2O2 molecules, H2O2 and water molecules, and H2O2 and halogen anions. H2O2 can form up to four H-bonds as a proton acceptor. The third chapter of the review is devoted to energetic computations and in particular density functional theory with periodic boundary conditions. The approaches are considered in detail, allowing one to obtain the H-bond energies in crystals. DFT computations provide deeper insight into the stability of peroxosolvates and explain why percarbamide and sodium percarbonate are stable to H2O2/H2O isomorphic transformations. The review ends with a description of the main modern trends in the synthesis of crystalline peroxosolvates, in particular, the production of peroxosolvates of high-energy compounds and mixed pharmaceutical forms with antiseptic and analgesic effects.

Introducing Bluish-Green Light-Emitting Diodes (OLEDs) and Tuning Their Color Intensity by Uranium Complexes: Synthesis, Characterization, and Photoluminescence Studies of 8-Hydroxyquinoline Complexes of Uranium

To improve our understanding of the chemistry of actinide complexes and to spur their development in the field of actinide markers, two new uranium complexes were synthesized using 8-hydroxyquinoline and 5,7-dichloro-8-hydroxyquinoline. The prepared complexes were characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, ultraviolet-visible spectroscopy, elemental analysis, and single-crystal X-ray diffraction. The impact of the electron-withdrawing group of the ligand on the photoluminescence spectra of the complexes in solution and in the solid state was scrutinized. The bandgap of the complexes was calculated using the density functional theory (DFT) method to investigate the effects of the electron-withdrawing groups on energy levels. The synthesized uranium complexes demonstrated appropriate levels of the lowest unoccupied molecular orbital energy, leading to favorable dye stability. The prepared uranium complexes showed blue fluorescent emission, and the sample with the most intense fluorescence was used to construct bluish-green organic light-emitting diodes using simple solution processing fabrication methods. Absorbance spectra, emission spectra, DFT-calculated energy levels, and comparisons of the fabricated organic light-emitting diodes indicated that the electron-withdrawing group was a key factor in photoluminescence behavior.

Organic Functionalization of Uranyl Peroxide Clusters to Impact Solubility

Benzene-1,2-diphosphonic acid (Ppb) was introduced into the uranyl peroxide cluster system, resulting in three Ppb-functionalized uranyl peroxide clusters, (UO₂)₂₀(O₂)₂₀(C₆H₄P₂O₆)₁₀^40- (U₂₀Ppb₁₀), (UO₂)₂₆(O₂)₃₃(C₆H₄P₂O₆)₆^38- (U₂₆Ppb₆), and (UO₂)₂₀(O₂)₂₄(C₆H₄P₂O₆)₆^32- (U₂₀Ppb₆). Dissolution experiments were performed for the potassium salts of U₂₀Ppb₁₀ and U₂₆Ppb₆, which revealed the capacity of U₂₀Ppb₁₀ to dissolve in the organic solvent dimethyl sulfoxide (DMSO). Unlike U₂₀Ppb₁₀, the K salt of U₂₆Ppb₆ did not dissolve in DMSO but was more soluble in water, perhaps due to the lower proportion of Ppb ligands in its structure. In this work, U₂₀Ppb₁₀ and U₂₀Ppb₆ formed as potassium salts and both adopt the fullerene topology of previously reported U₂₀. U₂₀ contains 20 uranyl peroxide units and encapsulates 12 Na cations. It is not possible for unfunctionalized U₂₀ to incorporate 12 K cations owing to space constraints, as is the case in the new clusters reported here. Transformation of U₂₀Ppb₁₀ in water over time to produce U₂₄ was observed, possibly owing to its ability to incorporate K cations, which have been associated with the formation of U₂₄.

Oxygen and peroxide bridged uranyl(vi) dimers bearing tetradentate hybrid ligands: supramolecular self-assembly and generation pathway

Crystals of U(vi) complexes with N,N,N′,N′-tetramethyl-2,2′-bipyridine-6,6′-dicarboxamide and N,N,N′,N′-tetramethyl-1,10-phenanthroline-2,9-dicarboxamide were obtained under variable reaction conditions, and the structures were determined by single-crystal X-ray diffraction.

Ionic liquid-stabilized vanadium oxo-clusters catalyzing alkane oxidation by regulating oligovanadates

The specific ionic liquid [TBA][Pic]-stabilized vanadium oxo-clusters exist in the form of a trimer and a dimer and are highly active for catalyzing C–H bond oxidation with H₂O₂ as an oxidant.

Structural and Computational Characterization of a Bridging Zwitterionic-Amidoxime Uranyl Complex

A bridging (μ₂) neutral zwitterionic amidoxime binding mode previously unobserved between amidoximes and uranyl is reported and compared to other uranyl amidoxime complexes. Density functional theory computations show the dinuclear complex exhibits a shallow potential energy surface allowing for facile inclusion of a nonbonding water molecule in the solid-state.

A structural and thermodynamic study of the complexes of U(vi) with azinecarboxylates

Complexation of U(vi) with pyridazine-3-carboxylate (PDZ) and pyrazine-2-carboxylate (PAZ) was studied by spectrophotometry, potentiometry and microcalorimetry in 1.0 mol dm⁻³ NaClO₄.

Detection and identification of solids, surfaces, and solutions of uranium using vibrational spectroscopy

The purpose of this review is to provide an overview of uranium speciation using vibrational spectroscopy methods including Raman and IR. Uranium is a naturally occurring, radioactive element that is utilized in the nuclear energy and national security sectors. Fundamental uranium chemistry is also an active area of investigation due to ongoing questions regarding the participation of 5f orbitals in bonding, variation in oxidation states and coordination environments, and unique chemical and physical properties. Importantly, uranium speciation affects fate and transportation in the environment, influences bioavailability and toxicity to human health, controls separation processes for nuclear waste, and impacts isotopic partitioning and geochronological dating. This review article provides a thorough discussion of the vibrational modes for U(IV), U(V), and U(VI) and applications of infrared absorption and Raman scattering spectroscopies in the identification and detection of both naturally occurring and synthetic uranium species in solid and solution states. The vibrational frequencies of the uranyl moiety, including both symmetric and asymmetric stretches are sensitive to the coordinating ligands and used to identify individual species in water, organic solvents, and ionic liquids or on the surface of materials. Additionally, vibrational spectroscopy allows for the in situ detection and real-time monitoring of chemical reactions involving uranium. Finally, techniques to enhance uranium species signals with vibrational modes are discussed to expand the application of vibrational spectroscopy to biological, environmental, inorganic, and materials scientists and engineers.

A General Approach to Access Morphologies of Polyoxometalates in Solution by Using SAXS: An Ab Initio Modeling Protocol

Herein, we reported a general protocol for an ab initio modeling approach to deduce structure information of polyoxometalates (POMs) in solutions from scattering data collected by the small-angle X-ray scattering (SAXS) technique. To validate the protocol, the morphologies of a serious of known POMs in either aqueous or organic solvents were analyzed. The obtained particle morphologies were compared and confirmed with previous reported crystal structures. To extend the feasibility of the protocol to an unknown system of aqueous solutions of Na₂ MoO₄ with the pH ranging from -1 to 8.35, the formation of {Mo₃₆ } clusters was probed, identified, and confirmed by SAXS. The approach was further optimized with a multi-processing capability to achieve fast analysis of experimental data, thereby, facilitating in situ studies of formations of POMs in solutions. The advantage of this approach is to generate intuitive 3D models of POMs in solutions without confining information such as symmetries and possible sizes.

Synthesis, structural analysis, and supramolecular assembly of a series of in situ generated uranyl–peroxide complexes with functionalized 2,2′-bipyridine and varied carboxylic acid ligands

Presented herein are eight new binuclear uranyl complexes bridged by in situ generated peroxide ligands and assembled via noncovalent interactions.

Dicyanoaurate-based heterobimetallic uranyl coordination polymers

The first series of uranyl ([UO₂]²⁺)-dicyanoaurate coordination polymers and molecular complexes has been synthesized. Reactions of [A][Au(CN)₂] (A = [ⁿBu₄N]⁺ or [(Ph₃P)₂N]⁺ ([PPN])) and uranyl nitrate in alcoholic solvents in ambient light led to [A]₂[(UO₂)₂(μ-η²:η²-O₂)(NO₃)₂(μ-Au(CN)₂)₂], which incorporates peroxo ligands into a one-dimensional ladder topology with alternating aurophilic and peroxo rungs. Conducting the reaction with non-alcoholic solvents formed two polymorphs of a one-dimensional chain, [PPN][UO₂(NO₃)₂Au(CN)₂], from acetone, and a molecular analogue, [PPN]₂[UO₂(NO₃)₂(Au(CN)₂)₂], from acetonitrile, none of which exhibited aurophilic interactions. The addition of 2,2'-bipyridine to the initial reaction resulted in [UO₂(bipy)(MeO)(MeOH)]₂[(μ-Au(CN)₂)(Au(CN)₂)], a one-dimensional structure which propagates via a series of linear aurophilic bonds with pendant uranyl complexes; methanol and methoxy ligands provide additional connections through hydrogen bonding. The addition of 5,5'-dimethyl-2,2'-bipyridine using solvothermal conditions resulted in the one-dimensional ladder [UO₂(Me₂bipy)Au(CN)₂]₂[(μ-OH)₂], generated through aurophilic bonds and hydroxide ligands. The incorporation of 2,2':6',2''-terpyridine (terpy) using solvothermal conditions resulted in [[UO₂(terpy)]₂(μ-NO₃)(μ-O)][Au(CN)₂], a molecular salt with no aurophilic interactions. Emission spectra attributable to aurophilic interactions are observed in [ⁿBu₄N]₂[(UO₂)₂(μ-η²:η²-O₂)(NO₃)₂(μ-Au(CN)₂)₂], while all others only show emission typical of the uranyl cation.

Hybrid Lanthanide-Actinide Peroxide Cage Clusters

A cage cluster consisting of 31 uranyl and 9 Sm(3+) polyhedra self-assembles in an alkaline aqueous peroxide solution and crystallizes (U31Sm9). Trimers of Sm(3+) polyhedra are templated by μ3-η(2):η(2):η(2)-peroxide groups and link to oxo atoms of uranyl ions. Three such trimers link into a ring through uranyl hexagonal bipyramids, and these are attached through six polyhedra to a unit consisting of 21 uranyl hexagonal bipyramids to complete the cage. Luminescence spectra collected with an excitation wavelength of 420 nm reveal fine structure, which is not observed for a cluster containing only uranyl polyhedra.