Unusual Concentration Induced Antithermal Quenching of the Bi2+ Emission from Sr2P2O7:Bi2+

Visible-to-Near-Infrared Mechanoluminescence in Bi-Activated Spinel Compounds for Multiple Information Anticounterfeiting

Mechanoluminescence (ML) is the nonthermal luminescence generated in the process of force-to-light conversion, which has broad prospects in stress sensing, wearable devices, biomechanics, and multiple information anticounterfeiting. Multivalence emitter ions utilize their own self-reduction process to realize multiband ML without introducing another dopant, such as Eu3+/Eu2+, Sm3+/Sm2+, and Mn4+/Mn2+. However, self-reduction-induced ML in bismuth-activated materials has rarely been reported so far. In this work, a novel visible-to-near-infrared (vis-NIR) ML induced by the self-reduction of Bi3+ to Bi2+ in the spinel-type compound (MgGa2O4) is reported. The photoluminescence (PL) spectra, PL excitation (PLE) spectra, and PL lifetime curves demonstrate that Bi3+/Bi2+ ions are the main luminescence centers. Notably, the possible self-reduction model is proposed, where a magnesium vacancy (VMg″) is considered as the driving force for the self-reduction of Bi3+ to Bi2+. Furthermore, an oxygen vacancy (VO••) is confirmed by electron paramagnetic resonance (EPR) spectroscopy. Combined with thermoluminescence (TL) glow curves and ML spectra, a plausible trap-controlled ML mechanism is illustrated, where electron-hole (VO••/VMg″) pairs play a significant role in capturing electrons and holes. It is worth noting that the proof-of-concept dual-mode electronic signature application is implemented based on the flexible ML film, which improves the capabilities of signature anticounterfeiting for high-level security applications. Besides, multistimulus-responsive luminescence behaviors of the ML film are realized under the excitation of a 254 nm UV lamp, thermal disturbance, 980 nm laser, and mechanical stimuli. In general, this study provides new insights into designing vis-NIR ML materials toward wider application possibilities.

Total Luminescence Spectroscopy for Quantification of Temperature Effects on Photophysical Properties of Photoluminescent Materials

Quantification of the temperature effects on the optical properties of photoluminescent (PL) materials is important for a fundamental understanding of both materials optical processes and rational PL materials design and applications. However, existing techniques for studying the temperature effects are limited in their information content. Reported herein is a temperature-dependent total photoluminescence (TPL) spectroscopy technique for probing the temperature dependence of materials optical properties. When used in combination with UV-vis measurements, this TPL method enables experimental quantification of temperature effects on fluorophore fluorescence intensity and quantum yield at any combination of excitation and detection wavelengths, including the fluorophore Stokes-shifted and anti-Stokes-shifted fluorescence. All model polyaromatic hydrocarbon (PAH) and xanthene fluorophores exhibited a strong excitation- and emission-wavelength dependence in their temperature effects. However, the heavy-atom effects used for explaining the strong temperature dependence of brominated anthracenes are not operative with xanthene fluorophores that have heavy atom substitutions. The insights from TPL measurements are important not only for enhancing the fundamental understandings of the materials photophysical properties but also for rational measurement design for applications where the temperature sensitivity of the fluorophore fluorescence is critical. An example application is demonstrated for developing a sensitive and robust ratiometric fluorescence thermometric method for in situ real-time monitoring of sample temperatures inside a fluorescence cuvette placed in a temperature-controlled sample holder.

Tuning of the thermal quenching performance of Bi3+-doped scheelite Ca(Mo/W)O4 solid solution phosphors

The utilization of phosphor materials has always been a significant challenge in terms of improving thermal quenching performance. In this work, the thermal quenching performance tuning mechanism which establishes the band gap and thermal quenching correlation patterns is proposed. The crystal field splitting energy D_q was decreased by changing the surrounding crystal lattice environment of Bi³⁺ through a solid solution replacement, and the thermal quenching activation energy ΔE of Bi³⁺ was tuned from 0.117 eV to 0.182 eV accordingly. At 423 K, the luminous intensity increases from 0.101 to 0.396 of the preliminary intensity at 303 K with increasing substitution. In addition, the band gap value of Bi³⁺ calculated by diffuse reflectance spectroscopy increased from 4.40 eV to 4.72 eV, which corresponds to a linear positive correlation between the band gap and the thermal quenching properties. Furthermore, a monophase white-emitting phosphor with good thermal stability was prepared by constructing a Bi³⁺-Eu³⁺ co-doping system. In particular, the relative sensitivity of S_r for temperature measurement applications reached 3.17% K^-1 based on the double-luminescence fluorescence intensity ratio. Thus, this modulation scheme can be used as a reference for the design of various phosphor materials with tunable thermal quenching properties in the future.

Efficient energy transfer from Bi3+ to Mn2+ in CaZnOS for WLED application

A series of Bi³⁺ and Mn²⁺ co-doped CaZnOS phosphors with a tunable emission color have been synthesized by a high temperature solid-state reaction method. Their crystal structure, spectroscopic properties, energy transfer and thermal quenching have been investigated systematically. An intense blue-green emission band at 485 nm and a red emission band at 616 nm were observed at an excitation wavelength of 375 nm, owing to the ³P_1,0→¹S₀ transition of Bi³⁺ and the ⁴T₁(⁴G) →⁶A₁(⁶S) transition of Mn²⁺, respectively. The tunable color from blue-green, white light to red light can be obtained by varying the Mn²⁺ ion concentration from 0.005 to 0.015 in CaZnOS:Bi³⁺. The decay time decreased from 642 to 273 ns with the Mn²⁺ ion concentration x increasing from 0.005 to 0.015, and the energy transfer efficiency η_T can reach up to 65% in the CaZnOS:Bi³⁺,0.015Mn²⁺ phosphor. As the temperature increases from 300 to 420 K, the emission intensity is maintained at 67%, and the activation energy E_a is estimated to be 0.28 eV. An LED fabricated using CaZnOS:Bi³⁺,0.01Mn²⁺ exhibited the chromaticity coordinates and corrected color temperature (CCT) of (0.338, 0.364) and 4655 K, respectively. These results validate the promising applications of the CaZnOS:Bi³⁺,Mn²⁺ phosphor in UV white LEDs.

Construction of strontium phosphate/graphitic-carbon nitride: A flexible and disposable strip for acetaminophen detection

A facile technique has been used to synthesize the strontium phosphate interlinked with graphitic carbon nitride nanosheets (SrP/g-CN NSs) nanocomposite for highly selective detection of acetaminophen (AP). The formation of SrP/g-CN NSs nanocomposite is evidenced by several spectroscopic and analytical methods. It was demonstrated that the SrP/g-CN NSs modified screen-printed carbon electrode (SPCE) exhibits excellent catalytic performance with low peak potential towards AP detection than those of pristine SrP-, g-CN NSs-, and bare- SPCEs. The outstanding electrochemical performance can be attributed to the robust synergistic effect between SrP and g-CN NSs. Likewise, g-CN NSs possess a porous multilayer network, which provides a large surface area, fast charge transferability, electrical conductivity, and numerous active sites. Under the optimal conditions, the fabricated sensor could detect AP with a linear relationship range from 0.01 to 370 µM, and the detection limit is calculated to be as low as 2.0 nM. The proposed sensor is successfully used to determine AP in water samples with satisfactory results.

Trap Energy Upconversion-Like Near-Infrared to Near-Infrared Light Rejuvenateable Persistent Luminescence

Persistent-luminescence phosphors (PLPs) have a wide variety of applications in the fields of photonics and biophotonics due to their ultralong afterglow lifetime. However, the existing PLPs are charged and recharged with short-wavelength high-energy photons or inconvenient and potentially risky X-ray beams. To date, deep tissue penetrable NIR light has mainly been used for photostimulated afterglow emission, which continues to decay and weaken after each cycle, Herein, a new paradigm of trap energy upconversion-like near-infrared (NIR) to near-infrared light rejuvenateable persistent luminescence in bismuth-doped calcium stannate phosphors and nanoparticles is reported. In contrast to the existing PLPs and persistent-luminescence nanoparticles, the materials enable the occurrence of a reversed transition of the carriers from a deep-level energy trap to a shallow-level trap upon excitation by low-energy NIR photons. Thus these new materials can be charged circularly via deep-tissue penetrable NIR photons, which is unable to be done for existing PLPs, and emit afterglow signals. This conceptual work will lay the foundation to design new categories of NIR-absorptive-NIR-emissive PLPs and nanoparticles featuring physically harmless and deep tissue penetrable NIR light renewability and sets the stage for numerous biological applications, which have been limited by current materials.

NIR light guided enhanced photoluminescence and temperature sensing in Ho3+/Yb3+/Bi3+ co-doped ZnGa2O4 phosphor

The conversion of NIR light into visible light has been studied in Ho3+/Yb3+/Bi3+ co-doped ZnGa2O4 phosphor for the first time. The crystallinity and particles size of the phosphor increase through Bi3+ doping. The absorption characteristics of Ho3+, Yb3+ and Bi3+ ions are identified by the UV-vis-NIR measurements. The Ho3+ doped phosphor produces intense green upconversion (UC) emission under 980 nm excitations. The emission intensity ~ excitation power density plots show contribution of two photons for the UC emissions. The UC intensity of green emission is weak in the Ho3+ doped phosphor, which enhances upto 128 and 228 times through co-doping of Yb3+ and Yb3+/Bi3+ ions, respectively. The relative and absolute temperature sensing sensitivities of Ho3+/Yb3+/5Bi3+ co-doped ZnGa2O4 phosphor are calculated to be 13.6 × 10-4 and 14.3 × 10-4 K-1, respectively. The variation in concentration of Bi3+ ion and power density produces excellent color tunability from green to red via yellow regions. The CCT also varies with concentration of Bi3+ ion and power density from cool to warm light. The color purity of phosphor is achieved to 98.6% through Bi3+ doping. Therefore, the Ho3+/Yb3+/Bi3+:ZnGa2O4 phosphors can be suitable for UC-based color tunable devices, green light emitting diodes and temperature sensing.

Pyrophosphate Phosphor Solid Solution with High Quantum Efficiency and Thermal Stability for Efficient LED Lighting

Phosphors with high quantum efficiency and thermal stability are greatly desired for lighting industries. Based on the design strategy of solid solution, a series of deep-blue-emitting phosphors (Sr0.99-xBax)2P2O7:0.02Eu2+ (SBxPE x = 0-0.5) are developed. Upon excitation at 350 nm, the optimized SB0.3PE phosphor shows a relatively narrow full width at half maximum (FWHM = 32.7 nm) peaking at 420 nm, which matches well with the plant absorption in blue region. Moreover, this phosphor exhibits obvious enhancement of internal quantum efficiency (IQE) (from 74% to 100%) and thermal stability (from 88% to 108% of peak intensity and from 99% to 124% of integrated area intensity at 150°C) compared with the pristine one. The white LED devices using SB0.3PE as deep-blue-emitting component show good electronic properties, indicating that SB0.3PE is promising to be used in plant growth lighting, white LEDs, and other photoelectric applications.

Luminescence Spectroscopy and Origin of Luminescence Centers in Bi-Doped Materials

Bi-doped compounds recently became the subject of an extensive research due to their possible applications as scintillator and phosphor materials. The oxides co-doped with Bi3+ and trivalent rare-earth ions were proposed as prospective phosphors for white light-emitting diodes and quantum cutting down-converting materials applicable for enhancement of silicon solar cells. Luminescence characteristics of different Bi3+-doped materials were found to be strongly different and ascribed to electronic transitions from the excited levels of a Bi3+ ion to its ground state, charge-transfer transitions, Bi3+ dimers or clusters, radiative decay of Bi3+-related localized or trapped excitons, etc. In this review, we compare the characteristics of the Bi3+-related luminescence in various compounds; discuss the possible origin of the corresponding luminescence centers as well as the processes resulting in their luminescence; consider the phenomenological models proposed to describe the excited-state dynamics of the Bi3+-related centers and determine the structure and parameters of their relaxed excited states; address an influence of different interactions (e.g., spin-orbit, electron-phonon, hyperfine) as well as the Bi3+ ion charge and volume compensating defects on the luminescence characteristics. The Bi-related luminescence arising from lower charge states (namely, Bi2+, Bi+, Bi0) is also reviewed.

Heat-resistant Pb(ii)-based X-ray scintillating metal–organic frameworks for sensitive dosage detection via an aggregation-induced luminescent chromophore

Unusual X-aggregation induced luminescent chromophores in heat-resistant Pb(ii)-based metal–organic frameworks facilitate excellent scintillation for X-ray dosage detection.

Misconceptions in electronic energy transfer: bridging the gap between chemistry and physics

Many treatments of energy transfer (ET) phenomena in current literature employ incorrect arguments and formulae and are not quantitative enough. This is unfortunate because we witness important breakthroughs from ET experiments in nanoscience. This review aims to clarify basic principles by focusing upon Förster-Dexter electric dipole-electric dipole (ED-ED) ET. The roles of ET in upconversion, downconversion and the antenna effect are described and the clichés and simple formulae to be avoided in ET studies are highlighted with alternative treatments provided.

On the character of the optical transitions in closed-shell transition metal oxides doped with Bi3+

The criterion |MMCT(Bi³⁺)–E_A(X)–ΔStokes| is introduced to assign the nature of the optical transitions in transition metal oxides doped with Bi³⁺.

Thermal degradation of ultrabroad bismuth NIR luminescence in bismuth-doped tantalum germanate laser glasses

Because of ultra-broadband luminescence in 1000-1700 nm and consequent applications in fiber amplifier and lasers in the new spectral range where traditional rare earth cannot work, bismuth-doped laser glasses have received rising interest recently. For long-term practical application, thermal degradation must be considered for the glasses. This, however, has seldom been investigated. Here we report the thermal degradation of bismuth-doped germanate glass. Heating and cooling cycle experiments at high temperature reveal strong dependence of the thermal degradation on glass compositions. Bismuth and tantalum lead to the reversible degradation, while lithium can produce permanent irreversible degradation. The degradation becomes worse as lithium content increases in the glass. Absorption spectra show this is due to partial oxidation of bismuth near-infrared emission center. Surprisingly, we notice the emission of bismuth exhibits blueshift, rather than redshift at a higher temperature, and the blueshift can be suppressed by increasing the lithium content.

Thermoluminescence kinetic features of Eu3+ doped strontium pyrophosphate after beta irradiation

Strontium pyrophosphate (Sr₂P₂O₇) doped with various concentrations of Eu³⁺ as a doping agent is synthesized using a combustion method and to study the thermoluminescence dosimetry [TLD] and applications.

Broadly tunable emission from Ca2Al2SiO7:Bi phosphors based on crystal field modulation around Bi ions

Realization of the tuning emission of Bi³⁺ by micro-modulation of the crystal field environment of the activator.