Postsynthetic Inner-Surface Functionalization of the Highly Stable Zirconium-Based Metal–Organic Framework DUT-67

Fluorination modification enhanced the water resistance of Universitetet i Oslo-67 for multiple volatile organic compounds adsorption under high humidity conditions: Mechanism study

The construction of metal-organic frameworks (MOFs) with highly efficient capture for volatile organic compounds (VOCs) adsorption under humid conditions is a significant yet formidable task. Herein, series of fluorinated UiO-67 modified with trifluoroacetic acid (TFA) and 4-fluorobenzoic acid were successfully synthesized for VOCs adsorption under high humidity conditions. Experiments results showed that UiO-67 modified with 4-fluorobenzoic acid (67-F) presented excellent adsorption capacity of 345 mg/g for toluene adsorption and exhibited great water resistance (10.0 vol% H2O, 374 mg/g toluene adsorption capacity). Characterization results indicated that the introduction of 4-fluorobenzoic acid induced the competitive coordination between 4-fluorobenzoic acid and 4,4-biphenyl dicarboxylic acid (BPDC) with Zr4+, causing the formation of abundant defects to provide extra adsorption sites. Meanwhile, the benzene ring in 4-fluorobenzoic acid enhanced the π-π conjugation, causing the further promotion of VOCs adsorption capacity. More importantly, the water resistance mechanism was investigated and elucidated that the introduction of F decreased the surface energy of 67-F and its affinity with water. Meanwhile, the metal complex induced by the fluorinated modification produced an electron-dense pore environment, which greatly improved its chemical and water stability. This work provided a strategy for preparing an adsorbent with high water resistance for real-world VOCs adsorption at high humidity conditions.

Capture Fluorocarbon and Chlorofluorocarbon from Air Using DUT-67 for Safety and Semi-Quantitative Analysis

Fluoro- and chlorofluorocabons (FC/CFCs) are important refrigerants, solvents, and fluoropolymers in industry while being toxic and carrying high global warming potential. Detection and reclamation of FC/CFCs based on adsorption technology with highly selective adsorbents is important to labor safety and environmental protection. Herein, the study reports an integrated method to combine capture, separation, enrichment, and analysis of representative FC/CFCs (chlorodifluoromethane(R22) and 1,1,1,2-tetrafluoroethane (R134a)) by using the highly stable and porous Zr-MOF, DUT-67. Gas adsorption and breakthrough experiments demonstrate that DUT-67 has high R22/R134a uptake (124/116 cm3 g-1) and excellent R22/R134a/CO2 separation performance (IAST selectivities of R22/CO2 and R134a/CO2 ranging from 51.4 to 33.3, and 31.1 to 25.8), even in rather low concentration and humid conditions. A semi-quantitative analysis protocol is set up to analyze the low concentrations of R22/R134a based on the high selective R22/R134a adsorption ability, fast adsorption kinetics, water-resistant utility, facile regeneration, and excellent recyclability of DUT-67. In situ single-crystal X-ray diffraction, theoretical calculations, and in situ diffuse reflectance infrared Fourier transform spectra have been employed to understand the adsorption mechanism. This work may provide a potential adsorbent for purge and trap technique under room temperature, thus promoting the application of MOFs for VOCs sampling and quantitative analysis.

MOF-Based Membranes for Remediated Application of Water Pollution

Membrane separation plays a crucial role in the current increasingly complex energy environment. Membranes prepared by metal-organic framework (MOF) materials usually possess unique advantages in common, such as uniform pore size, ultra-high porosity, enhanced selectivity and throughput, and excellent adsorption property, which have been contributed to the separation fields. In this comprehensive review, we summarize various designs and synthesized strategies of free-standing MOF and composite MOF-based membranes for water treatment. Special emphases are given not only on the effects of MOF on membrane performance, removal efficiencies, and elimination mechanisms, but also on the importance of MOF-based membranes for the applications of oily and micro-pollutant removal, adsorption, separation, and catalysis. The challenges and opportunities in the future for the industrial implementation of MOF-based membranes are also discussed.

Linear Polyethyleneimine-Based and Metal Organic Frameworks (DUT-67) Composite Hydrogels as Efficient Sorbents for the Removal of Methyl Orange, Copper Ions, and Penicillin V

This research explores the integration of DUT-67 metal organic frameworks into polyethyleneimine-based hydrogels to assemble a composite system with enough mechanical strength, pore structure and chemical affinity to work as a sorbent for water remediation. By varying the solvent-to-modulator ratio in a water-based synthesis path, the particle size of DUT-67 was successfully modulated from 1 μm to 200 nm. Once DUT-67 particles were integrated into the polymeric hydrogel, the composite hydrogel exhibited enhanced mechanical properties after the incorporation of the MOF filler. XPS, NMR, TGA, FTIR, and FT Raman studies confirmed the presence and interaction of the DUT-67 particles with the polymeric chains within the hydrogel network. Adsorption studies of methyl orange, copper(II) ions, and penicillin V on the composite hydrogel revealed a rapid adsorption kinetics and monolayer adsorption according to the Langmuir's model. The composite hydrogel demonstrated higher adsorption capacities, as compared to the pristine hydrogel, showcasing a synergistic effect, with maximum adsorption capacities of 473 ± 21 mg L-1, 86 ± 6 mg L-1, and 127 ± 4 mg L-1, for methyl orange, copper(II) ions, and penicillin V, respectively. This study highlights the potential of MOF-based composite hydrogels as efficient adsorbents for environmental pollutants and pharmaceuticals.

Unravelling the Water Adsorption Mechanism in Hierarchical MOFs: Insights from In Situ Positron Annihilation Lifetime Studies

Atmospheric water harvesting with metal-organic frameworks (MOFs) is a new technology providing a clean, long-term water supply in arid areas. In-situ positron annihilation lifetime spectroscopy (PALS) is proposed as a valid methodology for the mechanistic understanding of water sorption in MOFs and the selection of prospective candidates for desired applications. DUT-67-Zr and DUT-67-Hf frameworks are used as model systems for method validation because of their hierarchical pore structure, high adsorption capacity, and chemical stability. Both frameworks are characterized using complementary techniques, such as nitrogen (77 K) and water vapor (298 K) physisorption, SEM, and PXRD. DUT-67-Zr and DUT-67-Hf are investigated by PALS upon exposure to humidity for the first time, demonstrating the stepwise pore filling mechanism by water molecules for both MOFs. In addition to exploring the potential of PALS as a tool for probing MOFs during in situ water loading, this work offers perspectives on the design and use of MOFs for water harvesting.

Cooperative and Orthogonal Switching in the Solid State Enabled by Metal-Organic Framework Confinement Leading to a Thermo-Photochromic Platform

Cooperative behavior and orthogonal responses of two classes of coordinatively integrated photochromic molecules towards distinct external stimuli were demonstrated on the first example of a photo-thermo-responsive hierarchical platform. Synergetic and orthogonal responses to temperature and excitation wavelength are achieved by confining the stimuli-responsive moieties within a metal-organic framework (MOF), leading to the preparation of a novel photo-thermo-responsive spiropyran-diarylethene based material. Synergistic behavior of two photoswitches enables the study of stimuli-responsive resonance energy transfer as well as control of the photoinduced charge transfer processes, milestones required to advance optoelectronics development. Spectroscopic studies in combination with theoretical modeling revealed a nonlinear effect on the material electronic structure arising from the coordinative integration of photoresponsive molecules with distinct photoisomerization mechanisms. Thus, the reported work covers multivariable facets of not only fundamental aspects of photoswitch cooperativity, but also provides a pathway to modulate photophysics and electronics of multidimensional functional materials exhibiting thermo-photochromism.

Surface Properties of Fluorine-Functionalized Metal-Organic Frameworks Based on Inverse Gas Chromatography

The introduction of the concept of surface properties can help us to better analyze the basic physicochemical property changes of metal-organic framework (MOF) materials before and after fluorine functional group treatment. In this study, several polar and nonpolar probes were selected to determine the surface properties, including surface-dispersive free energy, Lewis acid-base constants of Ni-MOF-74, and perfluoro carboxylic acid-modified Ni-MOF-74-Fn (n = 3, 5, and 7) in the range of 343.15-383.15 K by inverse gas chromatography (IGC). It was observed that the surface energy of the treated Ni-MOF-74-Fn showed a substantial decrease with the growth of the perfluorocarbon alkyl chains and the increase in surface roughness. In addition, Lewis acidic sites exposed by the Ni-MOF-74 material after adopting modification with fluorine functional groups increased with the increase of perfluorinated carboxylic acid chains, and their surface properties changed from amphiphilic acidic to strongly acidic. These results not only enrich the basic physical property data of Ni-MOF-74 but also provide more theoretical basis for the fluorinated functionalized custom-designed MOFs and enrich their applications in the fields of multiphase catalysis, gas adsorption, and chromatographic separation.

Bioinspired Framework Catalysts: From Enzyme Immobilization to Biomimetic Catalysis

Enzymatic catalysis has fueled considerable interest from chemists due to its high efficiency and selectivity. However, the structural complexity and vulnerability hamper the application potentials of enzymes. Driven by the practical demand for chemical conversion, there is a long-sought quest for bioinspired catalysts reproducing and even surpassing the functions of natural enzymes. As nanoporous materials with high surface areas and crystallinity, metal-organic frameworks (MOFs) represent an exquisite case of how natural enzymes and their active sites are integrated into porous solids, affording bioinspired heterogeneous catalysts with superior stability and customizable structures. In this review, we comprehensively summarize the advances of bioinspired MOFs for catalysis, discuss the design principle of various MOF-based catalysts, such as MOF-enzyme composites and MOFs embedded with active sites, and explore the utility of these catalysts in different reactions. The advantages of MOFs as enzyme mimetics are also highlighted, including confinement, templating effects, and functionality, in comparison with homogeneous supramolecular catalysts. A perspective is provided to discuss potential solutions addressing current challenges in MOF catalysis.

Inorganic nanoparticles as scaffolds for bioorthogonal catalysts

Bioorthogonal transition metal catalysts (TMCs) transform therapeutically inactive molecules (pro-drugs) into active drug compounds. Inorganic nanoscaffolds protect and solubilize catalysts while offering a flexible design space for decoration with targeting elements and stimuli-responsive activity. These "drug factories" can activate pro-drugs in situ, localizing treatment to the disease site and minimizing off-target effects. Inorganic nanoscaffolds provide structurally diverse scaffolds for encapsulating TMCs. This ability to define the catalyst environment can be employed to enhance the stability and selectivity of the TMC, providing access to enzyme-like bioorthogonal processes. The use of inorganic nanomaterials as scaffolds TMCs and the use of these bioorthogonal nanozymes in vitro and in vivo applications will be discussed in this review.

Thiol-decorated defective metal-organic framework for effective removal of mercury(II) ion

Removal of mercury (Hg) ion from water is important while still faces challenges in capacity and adsorption speed. Herein, using thiol-containing mercaptoacetic acid (MA) as the template, we constructed a novel metal-organic framework (MOF) adsorbent, Zr-MSA-MA (MSA, mercaptosuccinic acid). Unlike other monodentate acids such as acetic acid and formic acid, MA benefits to maintain high-content binding sites, in the meantime of defect formation. On the basis, Zr-MSA-MA exhibits a high adsorption capacity of 714.8 mg g^-1 for Hg²⁺ and fast adsorption kinetics, superior to other MOF-based adsorbents. Co-existing metal ions and pH have only slight interference for the adsorption behavior. Besides, the adsorption is proved to an endothermic reaction and the adsorbent can be regenerated based on a simple elution. Further analysis indicates the strong chemical bonding of Hg²⁺ and -SH is the main adsorption mechanism. Thus, our work demonstrates the Zr-MSA-MA can serve as a potential adsorbent for Hg²⁺, and provides a novel strategy to construct defective adsorbent via using active group-containing template.

The Complexity of Comparative Adsorption of C6 Hydrocarbons (Benzene, Cyclohexane, n-Hexane) at Metal-Organic Frameworks

The relatively stable MOFs Alfum, MIL-160, DUT-4, DUT-5, MIL-53-TDC, MIL-53, UiO-66, UiO-66-NH₂, UiO-66(F)₄, UiO-67, DUT-67, NH₂-MIL-125, MIL-125, MIL-101(Cr), ZIF-8, ZIF-11 and ZIF-7 were studied for their C₆ sorption properties. An understanding of the uptake of the larger C₆ molecules cannot simply be achieved with surface area and pore volume (from N₂ sorption) but involves the complex micropore structure of the MOF. The maximum adsorption capacity at p p₀^-1 = 0.9 was shown by DUT-4 for benzene, MIL-101(Cr) for cyclohexane and DUT-5 for n-hexane. In the low-pressure range from p p₀^-1 = 0.1 down to 0.05 the highest benzene uptake is given by DUT-5, DUT-67/UiO-67 and MIL-101(Cr), for cyclohexane and n-hexane by DUT-5, UiO-67 and MIL-101(Cr). The highest uptake capacity at p p₀^-1 = 0.02 was seen with MIL-53 for benzene, MIL-125 for cyclohexane and DUT-5 for n-hexane. DUT-5 and MIL-101(Cr) are the MOFs with the widest pore window openings/cross sections but the low-pressure uptake seems to be controlled by a complex combination of ligand and pore-size effect. IAST selectivities between the three binary mixtures show a finely tuned and difficult to predict interplay of pore window size with (critical) adsorptive size and possibly a role of electrostatics through functional groups such as NH₂.

Fluorinated metal-organic frameworks for gas separation

Fluorinated metal-organic frameworks (F-MOFs) as fast-growing porous materials have revolutionized the field of gas separation due to their tunable pore apertures, appealing chemical features, and excellent stability. A deep understanding of their structure-performance relationships is critical for the synthesis and development of new F-MOFs. This critical review has focused on several strategies for the precise design and synthesis of new F-MOFs with structures tuned for specific gas separation purposes. First, the basic principles and concepts of F-MOFs as well as their structure, synthesis and modification and their structure to property relationships are studied. Then, applications of F-MOFs in adsorption and membrane gas separation are discussed. A detailed account of the design and capabilities of F-MOFs for the adsorption of various gases and the governing principles is provided. In addition, the exceptional characteristics of highly stable F-MOFs with engineered pore size and tuned structures are put into perspective to fabricate selective membranes for gas separation. Systematic analysis of the position of F-MOFs in gas separation revealed that F-MOFs are benchmark materials in most of the challenging gas separations. The outlook and future directions of the science and engineering of F-MOFs and their challenges are highlighted to tackle the issues of overcoming the trade-off between capacity/permeability and selectivity for a serious move towards industrialization.

Emerging advances and current applications of nanoMOF-based membranes for water treatment

Metal-organic frameworks (MOFs) are significantly tunable materials that can be exploited in a wide range of applications. In recent years, a large number of studies have been focused on synthesizing nano-scale MOFs (nanoMOFs), thus taking advantage of these unique materials in various applications, especially those that are only possible at nano-scale. One of the technologies where nanoMOF materials occupy a central role is the membrane technology as one of the most efficient separation techniques. Therefore, numerous reports can be found on the enhancement of the physicochemical properties of polymeric membranes by using nanoMOFs, leading to remarkably improved performance. One of the most considerable applications of these nanoMOF-based membranes is in water treatment systems, because freshwater scarcity is now an undeniable crisis facing humanity. In this in-depth review, the most prominent synthesis and post-synthesis methods for the fabrication of nanoMOFs are initially discussed. Afterwards, different nanoMOF-based composite membranes such as thin-film nanocomposites (TFN) and mixed-matrix membranes (MMM) and their various fabrication methods are reviewed and compared. Then, the impacts of using MOFs-based membranes for water purification through growing metal-organic frameworks crystals on the support materials and utilization of metal-organic frameworks as fillers in mixed matrix membrane (MMM) are highlighted. Finally, a summary of pros and cons of using nanoMOFs in membrane technology for water treatment purposes and clear future prospects and research potentials are presented.

Recent advances in the application of water-stable metal-organic frameworks: Adsorption and photocatalytic reduction of heavy metal in water

Heavy metals pollution in water is a global environmental issue, which has threatened the human health and environment. Thus, it is important to remove them under practical water environment. In recent years, metal-organic frameworks (MOFs) with water-stable properties have attracted wide interest with regard to the capture of hazardous heavy metal ions in water. In this review, the synthesis strategy and postsynthesis modification preparation methods are first summarized for water-stable MOFs (WMOFs), and then the recent advances on the adsorption and photocatalytic reduction of heavy metal ions in water by WMOFs are reviewed. In contrast to the conventional adsorption materials, WMOFs not only have excellent adsorption properties, but also lead to photocatalytic reduction of heavy metal ions. WMOFs have coupling and synergistic effects on the adsorption and photocatalysis of heavy metal ions in water, which make it more effective in treating single pollutants or different pollutants. In addition, by introducing appropriate functional groups into MOFs or synthesizing MOF-based composites, the stability and ability to remove heavy metal ions of MOFs can be effectively enhanced. Although WMOFs and WMOF-based composites have made great progress in removing heavy metal ions from water, they still face many problems and challenges, and their application potential needs to be further improved in future research. Finally, this review aims at promoting the development and practical application of heavy metal ions removal in water by WMOFs.

Post-synthetic modifications (PSM) on metal-organic frameworks (MOFs) for visible-light-initiated photocatalysis

The utilization of green and sustainable solar energy via photocatalysis is regarded as a promising strategy to tackle the ever-increasing energy shortage and environmental deterioration. In addition to traditional semiconductor-based photocatalysts, metal-organic frameworks (MOFs), a class of crystalline micro-mesoporous hybrid materials constructed from metal or metal nodes interconnected with multi-dentate organic linkers, are emerging as a new type of photocatalytic material. Post-synthetic modifications (PSM) on MOFs, in which chemical transformations or exchanges are made on pre-synthesized MOF materials, are found to be a powerful strategy for fabricating photoactive MOFs based on already existing MOFs. In this frontier article, different PSM strategies for the development of photoactive MOFs, including coordination on unsaturated metal sites, metalation on open coordinated sites, covalent modifications on ligands, ligand exchange, metal exchange and cavity encapsulation, have been summarized. Our views on the challenges and the direction in developing photocatalytic MOFs by PSM are also addressed. We hope that this frontier article can provide some guidance for rational designing of highly efficient MOF-based photocatalysts via PSM strategies and to stimulate more research interest to be devoted to this promising yet largely unexplored field.

Recent Improvement Strategies on Metal-Organic Frameworks as Adsorbent, Catalyst, and Membrane for Wastewater Treatment

The accumulation of pollutants in water is dangerous for the environment and human lives. Some of them are considered as persistent organic pollutants (POPs) that cannot be eliminated from wastewater effluent. Thus, many researchers have devoted their efforts to improving the existing technology or providing an alternative strategy to solve this environmental problem. One of the attractive materials for this purpose are metal-organic frameworks (MOFs) due to their superior high surface area, high porosity, and the tunable features of their structures and function. This review provides an up-to-date and comprehensive description of MOFs and their crucial role as adsorbent, catalyst, and membrane in wastewater treatment. This study also highlighted several strategies to improve their capability to remove pollutants from water effluent.

Efficient Removal of Chromium(VI) Anionic Species and Dye Anions from Water Using MOF-808 Materials Synthesized with the Assistance of Formic Acid

This study presents a simple approach to prepare MOF-808, an ultra-stable Zr-MOF constructed from 6-connected zirconium clusters and 1,3,5-benzene tricarboxylic acid, with tailored particle sizes. Varying the amount of formic acid as a modulator in the range of 200-500 equivalents results in MOF-808 materials with a crystal size from 40 nm to approximately 1000 nm. Apart from the high specific surface area, a combination of a fraction of mesopore and plenty of acidic centers on the Zr-clusters induces a better interaction with the ionic pollutants such as K2Cr2O7 and anionic dyes. MOF-808 shows uptakes of up to 141.2, 642.0, and 731.0 mg/g for K2Cr2O7, sunset yellow, and quinoline yellow, respectively, in aqueous solutions at ambient conditions. The uptakes for the ionic dyes are significantly higher than those of other MOFs reported from the literature. Moreover, the adsorption capacity of MOF-808 remains stable after four cycles. Our results demonstrate that MOF-808 is a promising ideal platform for removing oxometallates and anionic dyes from water.

Advanced applications of Zr-based MOFs in the removal of water pollutants

The global water pollution is caused by the increase of industrial and agricultural activities, which have produced various toxic pollutants. Pollutants in water generally consist of metal ions, pharmaceuticals and personal care products (PPCPs), oil spills, organic dyes, and other organic pollutants. Amongst the adsorbents that have been developed to deal with pollutants in water, Zr-based metal-organic frameworks (MOFs) have drawn scientists' great attention due to their excellent stability and adjustable functionalization. Herein, the present review article introduces the synthetic methods of functionalized Zr-based MOFs and summarizes their applications in water pollution treatment. It also clarifies the interactions and removal mechanisms between pollutants and Zr-based MOFs. The use of these MOFs with eminent adsorption ability and recycling performance have been discussed in detail. Zr-based MOFs also face some challenges such as high cost, lack of real water environment applications, selective removal of pollutants, and low ability to remove composite pollutants. Future research should focus on addressing these issues. Although there is still a blank of the practical utility of Zr-based MOFs on a commercial scale, the research reported to date clearly shows that they are very promising materials for the water treatment.

The applications and prospects of hydrophobic metal-organic frameworks in catalysis

In recent years, large numbers of hydrophobic/superhydrophobic metal-organic frameworks (MOFs) have been developed. These hydrophobic MOFs not only retain rich structural variety, highly crystalline frameworks, and uniform micropores, but they also have lower affinity towards water and boosted hydrolytic stability. Until now, there were two main strategies to prepare hydrophobic MOFs, including a one-step method and post-synthesis modification (PSM). PSM was an often-used strategy for preparing hydrophobic MOFs. Hydrophobic MOFs showed unique advantages when used as catalysts for various categories of reactions. Herein, recent research advances relating to hydrophobic MOFs in the catalytic field are presented. The catalytic activities of hydrophobic MOFs and corresponding hydrophilic ones are also compared, and the superiority of hydrophobic MOFs or MOF materials as catalysts in 10 reactions is discussed. Finally, the advantages of hydrophobic MOFs as catalysts or auxiliary materials are summarized and promising future developments of hydrophobic MOFs are highlighted.

Understanding the opportunities of metal–organic frameworks (MOFs) for CO2 capture and gas-phase CO2 conversion processes: a comprehensive overview

The rapid increase in the concentration of atmospheric carbon dioxide is one of the most pressing problems facing our planet.

Hydrophobic Metal-Organic Frameworks: Assessment, Construction, and Diverse Applications

Tens of thousands of metal-organic frameworks (MOFs) have been developed in the past two decades, and only ≈100 of them have been demonstrated as porous and hydrophobic. These hydrophobic MOFs feature not only a rich structural variety, highly crystalline frameworks, and uniform micropores, but also a low affinity toward water and superior hydrolytic stability, which make them promising adsorbents for diverse applications, including humid CO2 capture, alcohol/water separation, pollutant removal from air or water, substrate-selective catalysis, energy storage, anticorrosion, and self-cleaning. Herein, the recent research advancements in hydrophobic MOFs are presented. The existing techniques for qualitatively or quantitatively assessing the hydrophobicity of MOFs are first introduced. The reported experimental methods for the preparation of hydrophobic MOFs are then categorized. The concept that hydrophobic MOFs normally synthesized from predesigned organic ligands can also be prepared by the postsynthetic modification of the internal pore surface and/or external crystal surface of hydrophilic or less hydrophobic MOFs is highlighted. Finally, an overview of the recent studies on hydrophobic MOFs for various applications is provided and suggests the high versatility of this unique class of materials for practical use as either adsorbents or nanomaterials.

Probing the limits of linker substitution in aluminum MOFs through water vapor sorption studies: mixed-MOFs instead of mixed-linker CAU-23 and MIL-160 materials

Only water vapor sorption isotherms were able to reveal the mixed-MOF instead of mixed-linker material formation of CAU-23 and MIL-160.

Efficient separation of vitamins mixture in aqueous solution using a stable zirconium-based metal-organic framework

High-efficiency separation of niacin (NIA) and nicotinamide (NIC) still faces large challenge up to date. In this work, a stable zirconium-based metal-organic framework (DUT-67) was used to adsorb and separate NIA and NIC in aqueous solutions. The adsorption capacities for NIA and NIC at the concentration ratio of 1:1 were 110.2 mg g^-1 and 11.2 mg g^-1, respectively. Further study indicates that low ratio of NIA/ NIC is in favor of the separation. High temperature can restrain the adsorptions of NIA and NIC but promote the separation. Besides, DUT-67 can be well regenerated via a simple method. Mechanism analysis indicates that electrostatic interaction plays a critical role in the separation of these vitamins.

Improving MOF stability: approaches and applications

This review summarizes recent advances in the design and synthesis of stable MOFs and highlights the relationships between the stability and functional applications.

Metal–organic frameworks (MOFs) have been recognized as one of the most important classes of porous materials due to their unique attributes and chemical versatility. Unfortunately, some MOFs suffer from the drawback of relatively poor stability, which would limit their practical applications. In the recent past, great efforts have been invested in developing strategies to improve the stability of MOFs. In general, stable MOFs possess potential toward a broader range of applications. In this review, we summarize recent advances in the design and synthesis of stable MOFs and MOF-based materials via de novo synthesis and/or post-synthetic structural processing. Also, the relationships between the stability and functional applications of MOFs are highlighted, and finally, the subsisting challenges and the directions that future research in this field may take have been indicated.

Hydrophobic Metal-Organic Frameworks

Metal-organic frameworks (MOFs) have diverse potential applications in catalysis, gas storage, separation, and drug delivery because of their nanoscale periodicity, permanent porosity, channel functionalization, and structural diversity. Despite these promising properties, the inherent structural features of even some of the best-performing MOFs make them moisture-sensitive and unstable in aqueous media, limiting their practical usefulness. This problem could be overcome by developing stable hydrophobic MOFs whose chemical composition is tuned to ensure that their metal-ligand bonds persist even in the presence of moisture and water. However, the design and fabrication of such hydrophobic MOFs pose a significant challenge. Reported syntheses of hydrophobic MOFs are critically summarized, highlighting issues relating to their design, characterization, and practical use. First, wetting of hydrophobic materials is introduced and the four main strategies for synthesizing hydrophobic MOFs are discussed. Afterward, critical challenges in quantifying the wettability of these hydrophobic porous surfaces and solutions to these challenges are discussed. Finally, the reported uses of hydrophobic MOFs in practical applications such as hydrocarbon storage/separation and their use in separating oil spills from water are summarized. Finally, the state of the art is summarized and promising future developments of hydrophobic MOFs are highlighted.

Highly Chemically Stable MOFs with Trifluoromethyl Groups: Effect of Position of Trifluoromethyl Groups on Chemical Stability

Metal-organic frameworks (MOFs) are a class of advanced porous crystalline materials. However, numerous MOFs have poor chemical stability, significantly restricting their industrial application. The introduction of trifluoromethyl groups around clusters of MOFs results in a shielding effect caused by their hydrophobicity and bulkiness, thus preventing guest molecules from attacking the coordination bonds. To prove such a shielding effect, the position of the trifluoromethyl groups is rationally adjusted, with trifluoromethyl groups at the ortho positions of carboxyl groups significantly improving the chemical stability of UiO-67. The prepared UiO-67- o-2CF₃ remains intact after treatment with boiling water, 8 M HCl, 10 mM NaOH, and 50 ppm of NaF aqueous solutions. As the control experiment, trifluoromethyl groups at the meta positions of carboxyl groups have no shielding effect; hence, UiO-67- m-2CF₃ has a stability that is lower than that of UiO-67- o-2CF₃. In addition, the shielding effect is also applied to other MOFs, including DUT-5- o-2CF₃ and Al-TPDC- o-2CF₃, confirming the universality of this strategy.

Ferrocenecarboxylic acid: a functional modulator for UiO-66 synthesis and incorporation of Pd nanoparticles

FcCOOH was found to be an efficient modulator for UiO-66 synthesis and a functional group for incorporation of Pd nanoparticles.

Metal Organic Frameworks Based Materials for Heterogeneous Photocatalysis

The increase in environmental pollution due to the excessive use of fossil fuels has prompted the development of alternative and sustainable energy sources. As an abundant and sustainable energy, solar energy represents the most attractive and promising clean energy source for replacing fossil fuels. Metal organic frameworks (MOFs) are easily constructed and can be tailored towards favorable photocatalytic properties in pollution degradation, organic transformations, CO₂ reduction and water splitting. In this review, we first summarize the different roles of MOF materials in the photoredox chemical systems. Then, the typical applications of MOF materials in heterogeneous photocatalysis are discussed in detail. Finally, the challenges and opportunities in this promising field are evaluated.

Combining Linker Design and Linker-Exchange Strategies for the Synthesis of a Stable Large-Pore Zr-Based Metal-Organic Framework

A Zr(IV)-based metal-organic framework (MOF), termed reo-MOF-1 [Zr₆O₈(H₂O)₈(SNDC)₄], composed of 4-sulfonaphthalene-2,6-dicarboxylate (HSNDC^2-) linkers and Zr₆O₈(H₂O)₈(CO₂)₈ clusters was synthesized by solvothermal synthesis. Structural analysis revealed that reo-MOF-1 adopts the reo topology highlighted with large cuboctahedral cages (23 Å). This structure is similar to that found in DUT-52 (fcu topology), however, reo-MOF-1 lacks the body-centered packing of the 12-connected Zr₆O₄(OH)₄(CO₂)₁₂ clusters, which is attributed to the subtle, but crucial influence in the bulkiness of functional groups on the linkers. The control experiments, where the ratio of H₃SNDC/naphthalene-2,6-dicarboxylate linkers was varied, also support our finding that the bulky functionalities play a key role for defect-controlled synthesis. The reo-MOF-1_A framework was obtained by linker exchange to yield a chemically and thermally stable material despite its large pores. Remarkably, reo-MOF-1_A exhibits permanent porosity (Brunauer-Emmett-Teller and Langmuir surface areas of 2104 and 2203 m² g^-1, respectively). Owing to these remarkable structural features, reo-MOF-1_A significantly enhances the yield in Brønsted acid-catalyzed reactions.

Microwave-assisted activation and modulator removal in zirconium MOFs for buffer-free CWA hydrolysis

A novel, facile and efficient method was developed for the activation of acetic acid modulated zirconium MOFs. The protocol involves briefly heating the material in water using microwave irradiation. MOF-808, DUT-84 and UiO-66 were all activated in this manner to remove the modulator and organic solvent from the framework post synthesis, with retention of MOF integrity post activation. The degree of activation was characterised by the use of TGA and NMR. The catalytic activity of the activated MOFs and their non-activated counterparts was investigated for chemical warfare agent (CWA) hydrolysis. Upon activation, an increase in the rate of hydrolysis was observed in the degradation of CWA simulant dimethyl 4-nitrophenyl phosphate (DMNP). MOF-808 and DUT-84 were also screened as catalysts for the hydrolysis of the V-series agent VM, with remarkable half-lives obtained for MOF-808 in the absence of any buffers. Currently employed MOF activation procedures involve the use of additional organic solvents post synthesis; we believe this method to be ideally efficacious for the organic desolvation of zirconium MOFs and removing modulator additives.

Metal-Organic Frameworks for Thin-Layer Chromatographic Applications

Preparation of thin-layer chromatographic (TLC) plates based on metal-organic frameworks (MOFs) as porous stationary phases is described. DUT-67 (DUT = Dresden University of Technology), a zirconium based MOF, was used in combination with a fluorescent indicator as stationary phase for analyzing a small selection of a wide spectrum of relevant analytes. The successful separation of benzaldehyde from trans-cinnamaldehyde and 4-aminophenol from 2-aminotoluene is reported as a model system using optimized eluent mixtures containing acetic acid.

A chiral salen-based MOF catalytic material with high thermal, aqueous and chemical stabilities

A highly stable chiral Ni(salen)-based MOF material possessing a 1D open channel can efficiently catalyze the cycloaddition of simulated industrial CO₂ with epoxides, as well as the cycloaddition of epoxides with azides and alkynes under mild conditions.

Boosting selective oxidation of cyclohexane over a metal–organic framework by hydrophobicity engineering of pore walls

Hydrophobicity engineering for an iron-porphyrinic metal–organic framework has been developed to greatly improve the catalytic performance toward cyclohexane oxidation.