A "Beheaded" TAML Activator: A Compromised Catalyst that Emphasizes the Linearity between Catalytic Activity and pKa

The Mechanism of Formation of Active Fe-TAMLs Using HClO Enlightens Design for Maximizing Catalytic Activity at Environmentally Optimal, Circumneutral pH

Fe-TAML/peroxide catalysis provides simple, powerful, ultradilute approaches for removing micropollutants from water. The typically rate-determining interactions of H₂O₂ with Fe-TAMLs (rate constant k_I) are sharply pH-sensitive with rate maxima in the pH 9-10 window. Fe-TAML design or process design that shifts the maximum rates to the pH 6-8 window of most wastewaters would make micropollutant eliminations even more powerful. Here, we show how the different pH dependencies of the interactions of Fe-TAMLs with peroxide or hypochlorite to form active Fe-TAMLs (k_I step) illuminate why moving from H₂O₂ (pK_a, ca. 11.6) to hypochlorite (pK_a, 7.5) shifts the pH of the fastest catalysis to as low as 8.2. At pH 7, hypochlorite catalysis is 100-1000 times faster than H₂O₂ catalysis. The pH of maximum catalytic activity is also moderated by the pK_a's of the Fe-TAML axial water ligands, 8.8, 9.3, and 10.3, respectively, for [Fe{4-NO₂C₆H₃-1,2-(NCOCMe₂NSO₂)₂CHMe}(H₂O)_n]^- (2) [n = 1-2], [Fe{4-NO₂C₆H₃-1,2-(NCOCMe₂NCO)₂CF₂}(H₂O)_n]^- (1b), and [Fe{C₆H₄-1,2-(NCOCMe₂NCO)₂CMe₂}(H₂O)_n]^- (1a). The new bis(sulfonamido)-bis(carbonamido)-ligated 2 exhibits the lowest pK_a and delivers the largest hypochlorite over peroxide catalytic rate advantage. The fast Fe-TAML/hypochlorite catalysis is accompanied by slow noncatalytic oxidations of Orange II.

EPR spectroscopy elucidates the electronic structure of [FeV(O)(TAML)] complexes

The complete hyperfine tensor of ¹⁷O of the Fe^V-oxo moeity was probed by ENDOR spectroscopy. The EPR spectroscopic results reported here provide a conclusive experimental basis for elucidating the electronic structure of the Fe^V-oxo complex.

Enhanced Redox Reactivity of a Nonheme Iron(V)-Oxo Complex Binding Proton

Acid effects on the chemical properties of metal-oxygen intermediates have attracted much attention recently, such as the enhanced reactivity of high-valent metal(IV)-oxo species by binding proton(s) or Lewis acidic metal ion(s) in redox reactions. Herein, we report for the first time the proton effects of an iron(V)-oxo complex bearing a negatively charged tetraamido macrocyclic ligand (TAML) in oxygen atom transfer (OAT) and electron-transfer (ET) reactions. First, we synthesized and characterized a mononuclear nonheme Fe(V)-oxo TAML complex (1) and its protonated iron(V)-oxo complexes binding two and three protons, which are denoted as 2 and 3, respectively. The protons were found to bind to the TAML ligand of the Fe(V)-oxo species based on spectroscopic characterization, such as resonance Raman, extended X-ray absorption fine structure (EXAFS), and electron paramagnetic resonance (EPR) measurements, along with density functional theory (DFT) calculations. The two-protons binding constant of 1 to produce 2 and the third protonation constant of 2 to produce 3 were determined to be 8.0(7) × 10⁸ M^-2 and 10(1) M^-1, respectively. The reactivities of the proton-bound iron(V)-oxo complexes were investigated in OAT and ET reactions, showing a dramatic increase in the rate of sulfoxidation of thioanisole derivatives, such as 10⁷ times increase in reactivity when the oxidation of p-CN-thioanisole by 1 was performed in the presence of HOTf (i.e., 200 mM). The one-electron reduction potential of 2 (E_red vs SCE = 0.97 V) was significantly shifted to the positive direction, compared to that of 1 (E_red vs SCE = 0.33 V). Upon further addition of a proton to a solution of 2, a more positive shift of the E_red value was observed with a slope of 47 mV/log([HOTf]). The sulfoxidation of thioanisole derivatives by 2 was shown to proceed via ET from thioanisoles to 2 or direct OAT from 2 to thioanisoles, depending on the ET driving force.

A Synthetically Generated LFeIVOH n Complex

High-valent Fe-OH species are important intermediates in hydroxylation chemistry. Such complexes have been implicated in mechanisms of oxygen-activating enzymes and have thus far been observed in Compound II of sulfur-ligated heme enzymes like cytochrome P450. Attempts to synthetically model such species have thus far seen relatively little success. Here, the first synthetic Fe^IVOH _n complex has been generated and spectroscopically characterized as either [LFe^IVOH]^- or [LFe^IVOH₂]⁰, where H₄L = Me₄C₂(NHCOCMe₂NHCO)₂CMe₂ is a variant of a tetra-amido macrocyclic ligand (TAML). The steric bulk provided by the replacement of the aryl group with the -CMe₂CMe₂- unit in this TAML variant prevents dimerization in all oxidation states over a wide pH range, thus allowing the generation of Fe^IVOH _n in near quantitative yield from oxidation of the [LFe^IIIOH₂]^- precursor.

Bis phenylene flattened 13-membered tetraamide macrocyclic ligand (TAML) for square planar cobalt(III)

The preparation, characterization, and evaluation of a cobalt(III) complex with 13-membered tetraamide macrocyclic ligand (TAML) is described. This is a square-planar (X-ray) S = 1 paramagnetic (¹H NMR) compound, which becomes an S = 0 diamagnetic octahedral species in excess d₅-pyridine. Its one-electron oxidation at an electrode is fully reversible with the lowest E _1/2 value (0.66 V vs SCE) among all investigated Co^III TAML complexes. The oxidation results in a neutral blue species which is consistent with a Co^III/radical-cation ligand. The ease of oxidation is likely due to the two benzene rings incorporated in the ligand structure (whereas there is just one in many other Co^III TAMLs). The oxidized neutral species are unexpectedly EPR silent, presumably due to the π-stacking aggregation. However, they display eight-line hyperfine patterns in the presence of excess of 4-tert-butylpyridine or 4-tert-butyl isonitrile. The EPR spectra are more consistent with the Co^III/radical-cation ligand formulation rather than with a Co^IV complex. Attempts to synthesize a similar vanadium complex under the same conditions as for cobalt using [V^VO(OCHMe₂)₃] were not successful. TAML-free decavanadate was isolated instead.

Targeting of High-Valent Iron-TAML Activators at Hydrocarbons and Beyond

TAML activators of peroxides are iron(III) complexes. The ligation by four deprotonated amide nitrogens in macrocyclic motifs is the signature of TAMLs where the macrocyclic structures vary considerably. TAML activators are exceptional functional replicas of the peroxidases and cytochrome P450 oxidizing enzymes. In water, they catalyze peroxide oxidation of a broad spectrum of compounds, many of which are micropollutants, compounds that produce undesired effects at low concentrations-as with the enzymes, peroxide is typically activated with near-quantitative efficiency. In nonaqueous solvents such as organic nitriles, the prototype TAML activator gave the structurally authenticated reactive iron(V)oxo units (Fe^VO), wherein the iron atom is two oxidation equivalents above the Fe^III resting state. The iron(V) state can be achieved through the intermediacy of iron(IV) species, which are usually μ-oxo-bridged dimers (Fe^IVFe^IV), and this allows for the reactivity of this potent reactive intermediate to be studied in stoichiometric processes. The present review is primarily focused at the mechanistic features of the oxidation by Fe^VO of hydrocarbons including cyclohexane. The main topic is preceded by a description of mechanisms of oxidation of thioanisoles by Fe^VO, because the associated studies provide valuable insight into the ability of Fe^VO to oxidize organic molecules. The review is opened by a summary of the interconversions between Fe^III, Fe^IVFe^IV, and Fe^VO species, since this information is crucial for interpreting the kinetic data. The highest reactivity in both reaction classes described belongs to Fe^VO. The resting state Fe^III is unreactive oxidatively. Intermediate reactivity is typically found for Fe^IVFe^IV; therefore, kinetic features for these species in interchange and oxidation processes are also reviewed. Examples of using TAML activators for C-H bond cleavage applied to fine organic synthesis conclude the review.

NaClO-Generated Iron(IV)oxo and Iron(V)oxo TAMLs in Pure Water

The unique properties of entirely aliphatic TAML activator [Fe^III{(Me₂CNCOCMe₂NCO)₂CMe₂}OH₂]^- (3), namely the increased steric bulk of the ligand and the unmatched resistance to the acid-induced demetalation, enables the generation of high-valent iron derivatives in pure water at any pH. An iron(V)oxo species is readily produced with NaClO at pH values from 2 to 10.6 without any observable intermediate. This is the first reported example of iron(V)oxo formed in pure water. At pH 13, iron(V)oxo is not formed and NaClO oxidizes 3 to an iron(IV)oxo derivative.