Carbon-Doped Mesoporous Anatase TiO2 Multi-Tubes Nanostructures for Highly Improved Visible Light Photocatalytic Activity

Bio-inspired synthesis of N-doped TiO2/C nanocrystals using jellyfish mucus with high visible-light photocatalytic efficiency

Non-metal doping of titanium dioxide (TiO2) has been widely investigated, because it can facilely improve the optical response of TiO2 under visible light excitation in environmental pollution treatments. In the ongoing efforts, however, little consideration has been given to the use of harmful marine organisms as dopants. Here, we employed the natural mucus proteins of the large harmful jellyfish Aurelia coerulea and Nemopilema nomurai, which have frequently bloomed in East Asian marginal seas in recent decades, to synthesize mesoporous nitrogen-doped TiO2 nanocrystals modified with carbon (N-TiO2/C) by a simple hydrothermal method. These nanocrystals were composed of predominantly anatase phase and a small amount of brookite phase TiO2. Their mesoporous structures changed with the variation of the volume ratio of jellyfish mucus added to tetrabutyl titanate (TBT). At the same ratio, larger surface area and pore volume but smaller pore size were observed in N-TiO2/C nanocrystals from N. nomurai rather than A. coerulea. Nitrogen was determinately doped into the lattice of the prepared nanocrystals and the carbon species were modified on their surfaces, which narrowed the band gap, facilitated the separation of photogenerated electron-hole pairs and favored the absorption of visible light, thus improving their visible light photocatalytic activity. The photocatalytic degradation efficiency of Rhodamine B (RhB) under visible light irradiation first increased and then decreased with the gradual increase of the volume ratio of jellyfish mucus proteins to TBT. The maximum reached 97.52% in 20 min from N-TiO2/C nanocrystals synthesized using N. nomurai mucus at the volume ratio of 4 : 1, which showed a remarkably strong visible light absorption, lower band gap energy and smaller electron transfer resistance. These N-TiO2/C nanocrystals also had a relatively stable crystal structure in multiple degradation reactions. The main active species including superoxide radicals (˙O2 -), photogenerated holes (h+) and hydroxyl radicals (˙OH) were found to play a major role in the degradation process of RhB. This study highlights the potential high-value reapplication of harmful jellyfish mucus as a natural organic matrix in fabricating advanced materials with optimized functional properties.

Kilogram-scale fabrication of TiO2 nanoparticles modified with carbon dots with enhanced visible-light photocatalytic activity

Incorrect discharge of dye wastewater will cause environment pollution and be very harmful to human health. Visible-light photocatalysis over large-scale synthesized semiconductor materials can become one of the feasible solutions for the practical application of purifying dye wastewater. As a new candidate, carbon dots (CDs) with unique fluorescence were fabricated on a tens of grams scale and then further applied to the kilogram-scale synthesis of a CDs/TiO₂ composite by one-step heat treatment. Compared with single TiO₂ nanoparticles (NPs), the CDs/TiO₂ composite with a large specific surface area exhibits enhanced photo-degradation performance for methyl orange (MO). This phenomenon can be attributed to the loading of CDs in the TiO₂ NPs, which is conducive to broadening the light absorption spectrum and improving absorption intensity, narrowing the band gap, charge carrier trapping, up-converting properties, and charge separation. The kilogram-scale synthesis of the CDs/TiO₂ photocatalyst does not affect the morphology, structure, optical properties and photocatalytic performance of the composite, which opens up a new avenue to construct elaborate heterostructures for enhanced photocatalytic performance using visible light as the light source.

A Convenient and Stable Heterogeneous Nickel Catalyst for Hydrodehalogenation of Aryl Halides Using Molecular Hydrogen

Hydrodehalogenation is an effective strategy for transforming persistent and potentially toxic organohalides into their more benign congeners. Common methods utilize Pd/C or Raney-nickel as catalysts, which are either expensive or have safety concerns. In this study, a nickel-based catalyst supported on titania (Ni-phen@TiO2 -800) is used as a safe alternative to pyrophoric Raney-nickel. The catalyst is prepared in a straightforward fashion by deposition of nickel(II)/1,10-phenanthroline on titania, followed by pyrolysis. The catalytic material, which was characterized by SEM, TEM, XRD, and XPS, consists of nickel nanoparticles covered with N-doped carbon layers. By using design of experiments (DoE), this nanostructured catalyst is found to be proficient for the facile and selective hydrodehalogenation of a diverse range of substrates bearing C-I, C-Br, or C-Cl bonds (>30 examples). The practicality of this catalyst system is demonstrated by the dehalogenation of environmentally hazardous and polyhalogenated substrates atrazine, tetrabromobisphenol A, tetrachlorobenzene, and a polybrominated diphenyl ether (PBDE).

C-,N- and S-Doped TiO2 Photocatalysts: A Review

This article presents an overview of the reports on the doping of TiO2 with carbon, nitrogen, and sulfur, including single, co-, and tri-doping. A comparison of the properties of the photocatalysts synthesized from various precursors of TiO2 and C, N, or S dopants is summarized. Selected methods of synthesis of the non-metal doped TiO2 are also described. Furthermore, the influence of the preparation conditions on the doping mode (interstitial or substitutional) with reference to various types of the modified TiO2 is summarized. The mechanisms of photocatalysis for the different modes of the non-metal doping are also discussed. Moreover, selected applications of the non-metal doped TiO2 photocatalysts are shown, including the removal of organic compounds from water/wastewater, air purification, production of hydrogen, lithium storage, inactivation of bacteria, or carbon dioxide reduction.

3D mesoporous structure assembled from monoclinic M-phase VO2 nanoflakes with enhanced thermochromic performance

Herein, 3D mesoporous structures assembled from monoclinic M-phase VO₂ nanoflakes were successfully synthesized for enhanced thermochromic performance.

H2-oxidation driven by its behavior of losing an electron over B-doped TiO2 under UV irradiation

In this work, TiO2 was modified by doping the electron-deficient B element, and then the gas-sensing response of B-TiO2 to H2 under UV irradiation at room temperature in a N2 atmosphere and the oxidation of H2 over B-TiO2 under corresponding conditions were tested. It was found that H2 would accept an electron when adsorbed on the TiO2 surface, while H2 would donate an electron when adsorbed on the B-TiO2 surface. Correspondingly, H2 could not be oxidized over TiO2, but could be oxidized over B-TiO2. This indicated that the oxidation of H2 was dependent on the electron-transfer behavior between H2 and the surface of TiO2 or B-TiO2. Based on the relevant characterization results, it was proposed that H2 could accept an electron from TiO2 due to the higher Fermi level of TiO2, while H2 could donate an electron to B-TiO2 due to the lower Fermi level of B-TiO2 induced by doping B. This indicated that the electron-transfer behavior between H2 and TiO2 could be changed by adjusting the Fermi level of TiO2, while the electron-transfer behavior would further affect the photocatalytic activity of oxidizing H2. This result shows that the doable H2 photocatalytic oxidation in thermodynamics can be controlled by a kinetics factor (H2 losing-an-electron behavior). This work can be applied to provide an understanding of the photocatalytic oxidation behavior of other reactants over semiconductor materials.

Thermal-Sprayed Photocatalytic Coatings for Biocidal Applications: A Review

There have been ever-growing demands for disinfection of water and air in recent years. Efficient, eco-friendly, and cost-effective methods of disinfection for pathogens are vital to the health of human beings. The photocatalysis route has attracted worldwide attention due to its highly efficient oxidative capabilities and sustainable recycling, which can be used to realize the disinfection purposes without secondary pollution. Though many studies have comprehensively reviewed the work about photocatalytic disinfection, including design and fabrication of photocatalytic coatings, inactivation mechanisms, or practical applications, systematic reviews about the disinfection photocatalysis coatings from fabrication to effort for practical use are still rare. Among different ways of fabricating photocatalytic materials, thermal spray is a versatile surface coating technique and competitive in constructing large-scale functional coatings, which is a most promising way for the future environmental purification, biomedical and life health applications. In this review, we briefly introduced various photocatalytic materials and corresponding inactivation mechanisms for virus, bacteria and fungus. We summarized the thermal-sprayed photocatalysts and their antimicrobial performances. Finally, we discussed the future perspectives of the photocatalytic disinfection coatings for potential applications. This review would shed light on the development and implementation of sustainable disinfection strategies that is applicable for extensive use for controlling pathogens in the near future.

In situ growth of carbon nitride on titanium dioxide/hemp stem biochar toward 2D heterostructured photocatalysts for highly photocatalytic activity

In this work, hierarchical structure TiO₂/hemp stem biochar carbon (HSBC) and C₃N₄-TiO₂/HSBC were successfully fabricated, which were used as efficient visible-light photocatalyst degradation for ammonia nitrogen from aqueous solution. The as-prepared C₃N₄-TiO₂/HSBC hybrid catalyst showed the higher efficient photocatalytic activity for decomposition of ammonia nitrogen than those of pure TiO₂ and TiO₂/HSBC, suggesting suppressed recombination of photogenerated charges and promoted mass transfer due to synergistic effect, and thus increased photocatalytic degradation activity. The degradation of ammonia follows a pseudo-first-order kinetics. All prepared catalysts demonstrated extremely photocatalytic efficiency under visible-light and UV light illumination; the ammonia nitrogen photocatalytic degradation activity of C₃N₄-TiO₂/HSBC can reach 90.3% under UV light while the degradation activity achieved about 50.7% under visible-light irradiation. The results revealed that the h⁺ was dominantly active intermediates in the process of photocatalytic degradation. The prepared catalysts are promising for the degradation of ammonia nitrogen from water resource.

Valorisation of Fruits, their Juices and Residues into Valuable (Nano)materials for Applications in Chemical Catalysis and Environment

One of the most abundant wastes from all around the world is nutrient resources. Among them, fruits, their extracts, and residues comprise a major portion, which contain many valuable components that get lost during disposal or become burden on the shrinking landfills. These concerns are addressed by seeking sustainable processing methods that would have a minimal environmental impact. The crops contain renewable chemicals which are useful for catalysis, wastewater treatment, or preparation of nanomaterials; there has been an upsurge for the industrial applications of (nano)materials as their environmental and catalytic appliances is a fascinating subject to design cheaper and safer catalytic systems. Due to the excellent chemical properties of the fruit extracts, they have garnered attention as cost-effective catalysts and support materials. This review focuses on the preparation of (nano)materials and their catalytic and environmental applications and highlights the potential appliances and industrial benefits derived from these low-cost renewable and sustainable greener sources thus essentially converting waste into wealth.

Studies on interstitial carbon doping from a Ti precursor in a hierarchical TiO2 nanostructured photoanode by a single step hydrothermal route

Carbon doping from a Ti precursor in TiO₂ synthesized by a hydrothermal method was studied. The structural, optical and morphological study of the deposited material was carried out using X-ray diffraction, UV-vis spectroscopy and scanning electron microscopy characterization techniques. The elemental composition of the TiO₂ deposited with different precursor concentrations was studied using X-ray photoelectron spectroscopy and electron dispersive X-ray spectroscopy. The amount of elemental carbon in the TiO₂ matrix is found to be increased as the Ti precursor concentration is increased, which strengthens the proposed idea of carbon doping via a Ti precursor.

Interstitial carbon doping is possible directly from a Ti precursor (titanium(iv) isopropoxide) without using any other carbon source.

TiO2@C core@shell nanocomposites: A single precursor synthesis of photocatalyst for efficient solar water treatment

This study reports the facile synthesis of highly photoactive TiO₂@C core@shell nanocomposites through a single alkoxide precursor. TiO₂ and carbon-based hybrid nanomaterials are popular photocatalysts owing to their abundance, low toxicity, and high stability, making them strong candidates for practical solar water-treatment applications. However, synthesis of such nanomaterials is often a multi-step process and requires careful control of the external carbon source for producing the desired morphology. In this regard, this study reports the synthesis of well-dispersed TiO₂@C nanocomposites without the need of an external carbon source. The resulting photocatalyst was employed for treatment of various water-borne pollutants including several dyes, pharmaceuticals, and pathogens. Rapid mineralization of pollutants could be achieved even with low amounts of catalyst, with the performance well exceeding that of pristine TiO₂ and P25 Degussa. Results indicate that incorporation of C increases visible-light absorption and greatly improves the separation of photogenerated charge carriers. Given the facile synthesis and the wide scope of operation, the proposed catalyst could be a significant step towards practical photocatalytic solar water-treatment.

New insights into the synergistic effect of active radicals and adsorptive ability on the photodegradation of gaseous acetaldehyde over reduced graphene Oxide/P25 composite

Although coupling reduced graphene oxide (RGO) with TiO₂ is believed to enhance the photocatalysis through the light utilization, studies on its photothermal conversion effect are rarely reported. Herein, RGOP (reduced graphene oxide/P25) was synthesized to explore roles of the enhanced light adsorption and photothermal conversion in the photocatalytic process. It was found that although RGOP had increased absorbance, it actually possessed lower available light utilization compared with P25. In the synergistic effect of available light utilization, transfer resistance and hydrophilicity, RGOP exhibited less superoxide radicals but more hydroxyl radicals. In the presence of scavenger experiments, O₂^- was proved to play the predominant role in the photocatalytic process, while OH was the secondary one. In comparison to P25, the change of active radicals of RGOP was adverse to its photocatalysis. However, due to the superior adsorptive property of RGOP, it exhibited higher photocatalytic activity than P25. The improved photocatalytic activity of RGOP was ascribed to its superior adsorptive ability aside from active radicals (O₂-, OH).

Novel hollow titanium dioxide nanospheres with antimicrobial activity against resistant bacteria

The search for and synthesis of new antimicrobial nanostructures is important to reduce microbial incidence that induces infectious diseases and to aid in the antibiotic resistance crisis, which are two of the most pressing issues in global public health. In this work, novel, hollow, calcined titanium dioxide nanospheres (CSTiO₂) were successfully synthesized for the first time through the combination of electrospinning and atomic layer deposition techniques. Poly(vinylpyrrolidone) (PVP) electrosprayed spherical particles were double-coated with alumina and titanium dioxide, and after a calcination process, hollow nanospheres were obtained with a radius of approximately 345 nm and shell thickness of 17 nm. The structural characterization was performed using electron microscopy, and X-ray diffraction and small-angle X-ray diffraction evidenced an anatase titanium dioxide crystalline structure. Thermogravimetric analysis and Fourier-transform infrared spectroscopy studies demonstrated the absence of polymer residue after the calcination process. The antimicrobial properties of the developed CSTiO₂ hollow nanospheres were evaluated against different bacteria, including resistant E. coli and S. aureus strains, and when compared to commercial TiO₂ nanoparticles, CSTiO₂ nanospheres exhibited superior performance. In addition, the positive effect of UV irradiation on the antimicrobial activity was demonstrated.

Surfactant-free hydrothermal synthesis of hierarchical flower-like Bi2WO6 mesosphere nanostructures with excellent visible-light photocatalytic activity

Hierarchical flower-like Bi₂WO₆ mesosphere nanostructures self-assembled with nanosheets were synthesized by hydrothermal treatment of an aqueous suspension of Bi(NO₃)₃·5H₂O and Na₂WO₄·2H₂O without surfactants or mineralizers.

Recent Development of Photocatalysts Containing Carbon Species: A Review

Undoubtedly, carbon-based (nano)composites can be promising photocatalysts with improved photocatalytic activity due to the coupling effect from the incorporation of carbon species. In this mini-review, we focus on the recent development of photocatalysts based on carbon-based (nano)composites. TiO2 is well-known as a typical photocatalyst. Special attention is paid to the various types of carbon–TiO2 composites such as C-doped TiO2, N–C-doped TiO2, metal–C-doped TiO2, and other co-doped C/TiO2 composites. Various synthetic strategies including the solvothermal/hydrothermal method, sol–gel method, and template-directed method are reviewed for the preparation of carbon-based TiO2 composites. C/graphitic carbon nitride (g-C3N4) composites and ternary C-doped composites are also summarized and ascribed to the unique electronic structure of g-C3N4 and the synergistic effect of the ternary interfaces, respectively. In the end, we put forward the future perspective of the photocatalysts containing carbon species based on our knowledge.

Synthesis of novel laccase-biotitania biocatalysts for malachite green decolorization

Biomimetic mineralization has emerged as a novel tool for generating excellent supports for enzyme stabilization. In this work, protamine was used to induce titanium (IV) bis(ammonium lactato) dihydroxide (Ti-BALDH) into titania nanoparticles. This biomimetic titanification process was adopted for laccase immobilization. Laccase-biotitania biocatalyst was prepared and the effect of different parameters (buffer solution, titania precursor concentration, protamine concentration, and enzyme loading) on the encapsulation efficiency and recovery of laccase were evaluated. Compared with free laccase, the thermal and pH stability of immobilized laccase were improved significantly. In addition, laccase loaded on titania was effective at enhancing its storage stability. After seven consecutive cycles, the immobilized laccase still retained 51% of its original activity. Finally, laccase-biotitania biocatalysts showed good performance on decolorization of malachite green (MG), which can be attributed to an adsorption and degradation effect. The intermediates of the MG degradation were identified by gas chromatography-mass spectrometry (GC-MS) analysis, and the most probable degradation pathway was proposed. This study provides deeper understanding of the laccase-biotitania particles as a fast biocatalyst for MG decolorization.

Rapid degradation of unmanageable polycyclic aromatic hydrocarbons by a C-ZnO solid solution nanocatalyst

Unmanageable polycyclic aromatic hydrocarbons (PAHs) were rapidly degraded by a C atom-doped ZnO solid solution (C-ZnO SS) nanocatalyst due to the sucker effect.