Clarifying the Equilibrium Speciation of Periodate Ions in Aqueous Medium

Matching periodate peak absorbance by far UVC at 222 nm promotes the degradation of micropollutants and energy efficiency

Periodate (PI)-based advanced oxidation processes have gained increasing interest. This study for the first time elevates the light-activation capacity of PI by using far UVC at 222 nm (UV222/PI) without extra chemical inputs. The effectiveness and the underlying mechanisms of UV222/PI for the remediation of micropollutants were studied by selecting atenolol (ATL) as a representative. PI possessed a high molar absorption coefficient of 9480-6120 M-1 cm-1 at 222 nm in the pH range of 5.0-9.0, and it was rapidly decomposed by UV222 with first-order rate constants of 0.0055 to 0.002 s-1. ATL and the six other organic compounds were effectively degraded by the UV222/PI process under different conditions with the fluence-based rate constants generally two to hundred times higher than by UVA photolysis. Hydroxyl radical and ozone were confirmed as the major contributors to ATL degradation, while direct photolysis also played a role at higher pH or lower PI dosages. Degradation pathways of ATL were proposed including hydroxylation, demethylation, and oxidation. The high energy efficiency of the UV222/PI process was also confirmed. This study provides a cost-effective and convenient approach to enhance PI light-response activity for the treatment of micropollutants.

Homogenous Oxidizing Oligomerization Coupled with Coagulation for Water Purification

Natural manganese oxides could induce the intermolecular coupling reactions among small-molecule organics in aqueous environments, which is one of the fundamental processes contributing to natural humification. These processes could be simulated to design novel advanced oxidation technology for water purification. In this study, periodate (PI) was selected as the supplementary electron-acceptor for colloidal manganese oxides (Mn(IV)aq) to remove phenolic contaminants from water. By introducing polyferric sulfate (PFS) into the Mn(IV)aq/PI system and exploiting the flocculation potential of Mn(IV)aq, a post-coagulation process was triggered to eliminate soluble manganese after oxidation. Under acidic conditions, periodate exists in the H4IO6- form as an octahedral oxyacid capable of coordinating with Mn(IV)aq to form bidentate complexes or oligomers (Mn(IV)-PI*) as reactive oxidants. The Mn(IV)-PI* complex could induce cross-coupling process between phenolic contaminants, resulting in the formation of oligomerized products ranging from dimers to hexamers. These oligomerized products participate in the coagulation process and become stored within the nascent floc due to their catenulate nature and strong hydrophobicity. Through coordination between Mn(IV)aq and H4IO6-, residual periodate is firmly connected with manganese oxides in the floc after coagulation and could be simultaneously separated from the aqueous phase. This study achieves oxidizing oligomerization through a homogeneous process under mild conditions without additional energy input or heterogeneous catalyst preparation. Compared to traditional mineralization-driven oxidation techniques, the proposed novel cascade processes realize transformation, convergence, and separation of phenolic contaminants with high oxidant utilization efficiency for low-carbon purification.

Ozone- and Hydroxyl Radical-Induced Degradation of Micropollutants in a Novel UVA-LED-Activated Periodate Advanced Oxidation Process

In this study, novel light emitting diode (LED)-activated periodate (PI) advanced oxidation process (AOP) at an irradiation wavelength in the ultraviolet A range (UVA, UVA-LED/PI AOP) was developed and investigated using naproxen (NPX) as a model micropollutant. The UVA-LED/PI AOP remarkably enhanced the degradation of NPX and seven other selected micropollutants with the observed pseudo-first-order rate constants ranging from 0.069 ± 0.001 to 4.50 ± 0.145 min-1 at pH 7.0, demonstrating a broad-spectrum micropollutant degradation ability. Lines of evidence from experimental analysis and kinetic modeling confirmed that hydroxyl radical (•OH) and ozone (O3) were the dominant species generated in UVA-LED/PI AOP, and they contributed evenly to NPX degradation. Increasing the pH and irradiation wavelength negatively affected NPX degradation, and this could be well explained by the decreased quantum yield (ΦPI) of PI. The degradation kinetics of NPX by the UVA-LED/PI AOP in the presence of water matrices (i.e., chloride, bicarbonate, and humic acid) and in real waters were examined, and the underlying mechanisms were illustrated. A total of nine transformation products were identified from NPX oxidation by the UVA-LED/PI AOP, mainly via hydroxylation, dealkylation, and oxidation pathways. The UVA-LED/PI AOP proposed might be a promising technology for the treatment of micropollutants in aqueous solutions. The pivotal role of ΦPI during light photolysis of PI may guide the future design of light-assisted PI AOPs.

Iodine revisited: If and how inorganic iodine species can be measured reliably and what cause their conversions in water?

This study revisited a list of inorganic iodine species on their detections and conversions under different water conditions. Several surprising results were found, e.g., UV-vis spectrophotometry is the only reliable method for I3- and I2 determinations with coexisting I-/IO3-/IO4-, while alkaline eluent of IC and LC columns can convert them into I- completely; IO4- can be converted into IO3- completely in IC columns and partly in LC columns; a small portion of IO3- was reduced to I- in LC columns. To avoid errors, a method for detecting multiple coexisting iodine species is suggested as follows: firstly, detecting I3- and I2 via UV-vis spectrophotometry; then, analyzing IO4- (> 0.2 mg/L) through LC; and lastly, obtaining I- and IO3- concentrations by deducting I- and IO3- measured by IC from the signals derived from I3-/I2/IO4-. As for stability, I- or IO3- alone is stable, but mixing them up generates I2 or H2OI+ under acidic conditions. Although IO4- is stable within pH 4.0-8.0, it becomes H5IO6/H3IO62- in strongly acidic/alkaline solutions. Increasing pH accelerates the conversions of I3- and I2 into I- under basic conditions, whereas dissolved oxygen and dosage exert little effect. Additionally, spiking ICl into water produces I2 and IO3- rather than HIO.

Enhanced hydroxyl radical generation for micropollutant degradation in the In2O3/Vis-LED process through the addition of periodate

Periodate (PI) as an oxidant has been extensively studied for organic foulants removal in advanced oxidation processes. Here PI was introduced into In2O3/Vis-LED process to enhance the formation of ·OH for promoting the degradation of organic foulants. Results showed that the addition of PI would significantly promote the removal of sulfamethoxazole (SMX) in the In2O3/Vis-LED process (from 9.26% to 100%), and ·OH was proved to be the dominant species in the system. Besides, the process exhibited non-selectivity in the removal of different organic foulants. Comparatively, various oxidants (e.g., peroxymonosulfate, peroxydisulfate, and hydrogen peroxide) did not markedly promote the removal of SMX in the In2O3/Vis-LED process. Electrochemical analyses demonstrated that PI could effectively receive photoelectrons, thus inhibiting the recombination of photogenerated electron-hole (e-/h+) pairs. The holes then oxidized the adsorbed H2O to generate ·OH, and the PI converted to iodate at the same time. Additionally, the removal rate of SMX reduced from 100% to 17.2% as Vis-LED wavelengths increased from 440 to 560 nm, because of the low energy of photons produced at longer wavelengths. Notably, the species of PI do not affect its ability to accept electrons, resulting in the degradation efficiency of SMX irrespective of pH (4.0-10.0). The coexistence of inorganic cations and anions (such as Cl-, CO32-/HCO3-, SO42-, Ca2+, and Mg2+) also had an insignificant effect on SMX degradation. Furthermore, the process also showed excellent degradation potential in real water. The proposed strategy provides a new insight for visible light-catalyzed activation of PI and guidance to explore green catalytic processes for high-efficiency removal of various organic foulants.

Insight into the electron transfer regime of periodate activation on MnO2: The critical role of surface Mn(IV)

At present, the potential mechanism of manganese oxide (MnO₂) activation of PI and the key active sites of PI activation are still unclear and controversial. To this end, three different crystal forms of MnO₂ were prepared in this study and used to activate PI to degrade pollutants. The results showed that different crystal types of MnO₂ showed different catalytic abilities, and the order was γ-MnO₂ > α-MnO₂ > β-MnO₂. Through quenching experiments, EPR tests, Raman experiments and in situ electrochemical experiments, it has been confirmed that electron transfer-mediated non-free radical process is the main mechanism of pollutant degradation, in which the active substance is the highly active metastable intermediate complex (MnO₂/PI*). Hydroxyl radical (HO^•), superoxide radical (O₂^•-), singlet oxygen (¹O₂) and iodine radical (IO₃^•) did not participate in pollutant degradation. The quantitative structure-activity relationship analysis confirmed that the catalytic performance of MnO₂ was highly positively correlated with the surface Mn(IV) content, which indicated that the surface Mn(IV) site was the main active site. Overall, this study will be of great help to the design and application of manganese dioxide activation for periodate degradation of pollutants.

Electrochemical activation of periodate with graphite electrodes for water decontamination: Excellent applicability and selective oxidation mechanism

Advanced oxidation technologies based on periodate (PI, IO₄^-) have garnered significant attention in water decontamination. In this work, we found that electrochemical activation using graphite electrodes (E-GP) can significantly accelerate the degradation of micropollutants by PI. The E-GP/PI system achieved almost complete removal of bisphenol A (BPA) within 15 min, exhibited unprecedented pH tolerance ranging from pH 3.0 to 9.0, and showed more than 90% BPA depletion after 20 h of continuous operation. Additionally, the E-GP/PI system can realize the stoichiometric transformation of PI into iodate, dramatically decreasing the formation of iodinated disinfection by-products. Mechanistic studies confirmed that singlet oxygen (¹O₂) is the primary reactive oxygen species in the E-GP/PI system. A comprehensive evaluation of the oxidation kinetics of ¹O₂ with 15 phenolic compounds revealed a dual descriptor model based on quantitative structure-activity relationship (QSAR) analysis. The model corroborates that pollutants exhibiting strong electron-donating capabilities and high pK_a values are more susceptible to attack by ¹O₂ through a proton transfer mechanism. The unique selectivity induced by ¹O₂ in the E-GP/PI system allows it to exhibit strong resistance to aqueous matrices. Thus, this study demonstrates a green system for the sustainable and effective elimination of pollutants, while providing mechanistic insights into the selective oxidation behaviour of ¹O₂.

Understanding the Importance of Periodate Species in the pH-Dependent Degradation of Organic Contaminants in the H2O2/Periodate Process

Although periodate-based advanced oxidation processes have been proven to be efficient in abating organic contaminants, the activation properties of different periodate species remain largely unclear. Herein, by highlighting the role of H₄IO₆^-, we reinvestigated the pH effect on the decontamination performance of the H₂O₂/periodate process. Results revealed that elevating pH from 2.0 to 10.0 could markedly accelerate the rates of organic contaminant decay but decrease the amounts of organic contaminant removal. This pH-dependent trend of organic contaminant degradation corresponded well with the HO^· yield and the variation of periodate species. Specifically, although ¹O₂ could be detected at pH 9.0, HO^· was determined to be the major reactive oxidizing species in the H₂O₂/periodate process under all the tested pH levels. Furthermore, it was suggested that only H₄IO₆^- and H₂I₂O₁₀^4- could serve as the precursors of HO^·. The second-order rate constant for the reaction of H₂I₂O₁₀^4- species with H₂O₂ was determined to be ∼1199.5 M^-1 s^-1 at pH 9.0, which was two orders of magnitude greater than that of H₄IO₆^- (∼2.2 M^-1 s^-1 at pH 3.0). Taken together, the reaction pathways of H₂O₂ with different periodate species were proposed. These fundamental findings could improve our understanding of the periodate-based advanced oxidation processes.

Synthesis and Structural and Spectroscopic Studies of a pH-Neutral Argentic Chelate Complex: Tribasic Silver (III) Bisperiodate

The preparation of stable hypervalent metal complexes containing Ag(III) has historically been challenging due to their propensity for reduction under ambient conditions. This work explores the preparation of a tripotassium silver bisperiodate complex as a tetrahydrate via chemical oxidation of the central silver atom and orthoperiodate chelation. The isolation of the chelate complex in high yield and purity was achieved via acidimetric titration. The comprehensive physiochemical characterization of the tribasic silver bisperiodate included single crystal X-ray diffraction, thermogravimetric and differential scanning calorimetry, and infrared and ultraviolet-visible spectroscopy. Infrared and UV-visible absorption spectra (λ_max 255 and 365 nm) were in good agreement with historically prepared pentabasic diperiodatoargentate chelate complexes. The C2/c monoclinic distorted square planar structure of the bis-chelate complex affords a mutually supportive framework to both Ag(III) and I(VII), conferring stability under both thermal and long-term ambient conditions. Thermal analysis of the tribasic silver bisperiodate complex identified an endothermic mass loss, ΔH = +278.35 kJ/mol, observed at 139.0 °C corresponding to a solid-state reduction of silver from Ag(III) to Ag(I). Under ambient conditions, no significant degradation was observed over a 12 month period (P = 0.30) for the silver bisperiodate complex in a solid state, with an observed half-life of τ_1/2 = 147 days in a pH-neutral aqueous solution.

Spin State Tunes Oxygen Atom Transfer towards FeIV O Formation in FeII Complexes

Oxoiron(IV) complexes bearing tetradentate ligands have been extensively studied as models for the active oxidants in non-heme iron-dependent enzymes. These species are commonly generated by oxidation of their ferrous precursors. The mechanisms of these reactions have seldom been investigated. In this work, the reaction kinetics of complexes [Fe^II (CH₃ CN)₂ L](SbF₆ )₂ ([1](SbF₆ )₂ and [2](SbF₆ )₂ ) and [Fe^II (CF₃ SO₃ )₂ L] ([1](OTf)₂ and [2](OTf)₂ (1, L=^Me,H Pytacn; 2, L=^nP,H Pytacn; ^R,R' Pytacn=1-[(6-R'-2-pyridyl)methyl]-4,7- di-R-1,4,7-triazacyclononane) with Bu₄ NIO₄ to form the corresponding [Fe^IV (O)(CH₃ CN)L]²⁺ (3, L=^Me,H Pytacn; 4, L=^nP,H Pytacn) species was studied in acetonitrile/acetone at low temperatures. The reactions occur in a single kinetic step with activation parameters independent of the nature of the anion and similar to those obtained for the substitution reaction with Cl^- as entering ligand, which indicates that formation of [Fe^IV (O)(CH₃ CN)L]²⁺ is kinetically controlled by substitution in the starting complex to form [Fe^II (IO₄ )(CH₃ CN)L]⁺ intermediates that are converted rapidly to oxo complexes 3 and 4. The kinetics of the reaction is strongly dependent on the spin state of the starting complex. A detailed analysis of the magnetic susceptibility and kinetic data for the triflate complexes reveals that the experimental values of the activation parameters for both complexes are the result of partial compensation of the contributions from the thermodynamic parameters for the spin-crossover equilibrium and the activation parameters for substitution. The observation of these opposite and compensating effects by modifying the steric hindrance at the ligand illustrates so far unconsidered factors governing the mechanism of oxygen atom transfer leading to high-valent iron oxo species.

The "Green" Electrochemical Synthesis of Periodate

High-grade periodate is relatively expensive, but is required for many sensitive applications such as the synthesis of active pharmaceutical ingredients. These high costs originate from using lead dioxide anodes in contemporary electrochemical methods and from expensive starting materials. A direct and cost-efficient electrochemical synthesis of periodate from iodide, which is less costly and relies on a readily available starting material, is reported. The oxidation is conducted at boron-doped diamond anodes, which are durable, metal-free, and nontoxic. The avoidance of lead dioxide ultimately lowers the cost of purification and quality assurance. The electrolytic process was optimized by statistical methods and was scaled up in an electrolysis flow cell that enhanced the space-time yields by a cyclization protocol. An LC-PDA analytical protocol was established enabling simple quantification of iodide, iodate, and periodate simultaneously with remarkable precision.

Structure Selectivity of Alkaline Periodate Oxidation on Lignocellulose for Facile Isolation of Cellulose Nanocrystals

Reported here for the first time is the alkaline periodate oxidation of lignocelluloses for the selective isolation of cellulose nanocrystals (CNCs). With the high concentrations as a potassium salt at pH 10, periodate ions predominantly exist as dimeric orthoperiodate ions (H₂I₂O₁₀⁴⁻). With reduced oxidizing activity in alkaline solutions, dimeric orthoperiodate ions preferentially oxidized non‐ordered cellulose regions. The alkaline surroundings promoted the degradation of these oxidized cellulose chains by β‐alkoxy fragmentation and generated CNCs. The obtained CNCs were uniform in size and generally contained carboxy groups. Furthermore, the reaction solution could be reused after regeneration of the periodate with ozone gas. This method allows direct production of CNCs from diverse sources, in particular lignocellulosic raw materials including sawdust (European beech and Scots pine), flax, and kenaf, in addition to microcrystalline cellulose and pulp.

On the Kinetics and Mechanism of the Thiourea Dioxide-Periodate Autocatalysis-Driven Iodine-Clock Reaction

The thiourea dioxide-periodate reaction has been investigated under acidic conditions using phosphate buffer within the pH range of 1.1-2.0 at 1.0 M ionic strength adjusted by sodium perchlorate. Absorbance-time series are monitored as a function of time at 468 nm, the isosbestic point of the I₂-I₃^- system. The profile of these kinetic runs follows either sigmoidal-shaped or rise-and-fall traces depending on the initial concentration ratio of the reactants. The clock species iodine appears after a well-defined but reproducible time lag even in substrate excess, meaning that the system may be classified as an autocatalysis-driven clock reaction. It is also demonstrated that the age of the thiourea dioxide solution markedly shortens the Landolt time, suggesting that the original form of thiourea dioxide (TDO) rearranges into a more reactive form and reacts faster than the original one. The behavior found is consistent with that recently observed in other oxidation reactions of TDO. To characterize the system quantitatively, a 22-step kinetic model is constructed from adapting the kinetic model of the TDO-iodate reaction published recently by supplementing it with six different reactions of periodate. By the help of seven fitted rate coefficients a sound agreement between the measured and calculated absorbance-time traces is obtained.

Design of an inherently-stable water oxidation catalyst

While molecular water-oxidation catalysts are remarkably rapid, oxidative and hydrolytic processes in water can convert their active transition metals to colloidal metal oxides or hydroxides that, while quite reactive, are insoluble or susceptible to precipitation. In response, we propose using oxidatively-inert ligands to harness the metal oxides themselves. This approach is demonstrated by covalently attaching entirely inorganic oxo-donor ligands (polyoxometalates) to 3-nm hematite cores, giving soluble anionic structures, highly resistant to aggregation, yet thermodynamically stable to oxidation and hydrolysis. Using orthoperiodate (at pH 8), and no added photosensitizers, the hematite-core complex catalyzes visible-light driven water oxidation for seven days (7600 turnovers) with no decrease in activity, far exceeding the documented lifetimes of molecular catalysts under turnover conditions in water. As such, a fundamental limitation of molecular complexes is entirely bypassed by using coordination chemistry to harness a transition-metal oxide as the reactive center of an inherently stable, homogeneous water-oxidation catalyst.

A current challenge in the development of molecular water oxidation catalysts is to overcome their inherent susceptibilities to oxidative or hydrolytic degradation under turnover conditions in water. Here, the authors design an inherently-stable water oxidation catalyst using oxidatively-inert ligands to harness a reactive metal oxide.

Imperfect mixing as a dominant factor leading to stochastic behavior: a new system exhibiting crazy clock behavior

It is clearly demonstrated that the arsenous acid-periodate reaction displays crazy-clock behavior when a statistically meaningful number of kinetic runs are performed under "exactly the same" conditions. Both extensive experimental and numerical simulation results gave convincing evidence that the stochastic feature of the title reaction originates from the imperfection of the mixing process, and neither local random fluctuation nor initial inhomogeneity alone is capable of explaining adequately the observed phenomena. Imperfect mixing is manifested-in practice-in the unintentional and inherent formation of dead volumes where the concentration of the reactants may even significantly differ from the ones measured in the case of a completely uniform concentration distribution, and the system may spend enough time there under imperfectly mixed conditions to complete the nonlinear chemical process. Furthermore, it is also shown that a more efficient mixing, i.e. a smaller dead volume size and shorter residence time being spent in the dead volume, does not necessarily mean Landolt times are smaller than the one measured under completely homogeneous conditions. Evidently, the "initial" concentration of the reagents in the dead volume-and of course in the rest of the solution-greatly influences the Landolt time to be measured in the case of an individual kinetic run and may therefore show either positive or negative deviation from the Landolt time for the completely homogeneous state. As a result, less efficient mixing may either accelerate or decelerate the rate of a nonlinear autocatalytic reaction at a macroscopic volume level.