C–S Bond Cleavage, Redox Reactions, and Dioxygen Activation by Nonheme Dicobalt(II) Complexes

Chromium-Thiolate Complex Undergoing C-S Bond Cleavage

The cleavage of C-S bonds represents a crucial step in fossil fuel refinement to remove organosulfur impurities. Efforts are required to identify alternatives that can replace the energy-intensive hydrodesulfurization process currently in use. In this context, we have developed a series of bis-thiolato-ligated CrIII complexes supported by the L2- ligand (L2- = 2,2'-bipyridine-6,6'-diyl(bis(1,1-diphenylethanethiolate), one of them displaying desulfurization of one thiolate of the ligand under reducing and acidic conditions at ambient temperature and atmospheric pressure. While only 5-coordinated complexes were previously isolated by reaction of L2- with 3d metal MIII ions, both 5- and 6-coordinated mononuclear complexes have been obtained in the case of CrIII, viz., [CrIIILCl], [CrIIILCl2]-, and [CrIIILCl(CH3CN)]. The investigation of the reactivity of [CrIIILCl(CH3CN)] under reducing conditions led to a dinuclear [CrIII2L2(μ-Cl)(μ-OH)] compound and, in the presence of protons, to the mononuclear CrIII complex [CrIII(LN2S)2]+, where LN2S- is the partially desulfurized form of L2-. A desulfurization mechanism has been proposed involving the release of H2S, as evidenced experimentally.

Nonheme binuclear transition metal complexes with hydrosulfide and polychalcogenides

The intriguing chemistry of chalcogen (S, Se)-containing ligands and their capability to bridge multiple metal centres have resulted in a plethora of reports on transition metal complexes featuring hydrosulfide (HS-) and polychalcogenides (En2-, E = S, Se). While a large number of such molecules are strictly organometallic complexes, examples of non-organometallic complexes featuring HS- and En2- with N-/O-donor ligands are relatively rare. The general synthetic procedure for the transition metal-hydrosulfido complexes involves the reaction of the corresponding metal salts with HS-/H2S and this is prone to generate sulfido bridged oligomers in the absence of sterically demanding ligands. On the other hand, the synthetic methods for the preparation of transition metal-polychalcogenido complexes include the reaction of the corresponding metal salts with En2- or the two electron oxidation of low-valent metals with elemental chalcogen, often at an elevated temperature and/or for a long time. Recently, we have developed new synthetic methods for the preparation of two new classes of binuclear transition metal complexes featuring either HS-, or Sn2- and Sen2- ligands. The new method for the synthesis of transition metal-hydrosulfido complexes involved transition metal-mediated hydrolysis of thiolates at room temperature (RT), while the method for the synthesis of transition metal-polychalcogenido complexes involved redox reaction of coordinated thiolates and exogenous elemental chalcogens at RT. An overview of the synthetic aspects, structural properties and intriguing reactivity of these two new classes of transition metal complexes is presented.

Generation and Reactivity of Polychalcogenide Chains in Binuclear Cobalt(II) Complexes

A series of six binuclear Co(II)-thiolate complexes, [Co2(BPMP)(S-C6H4-o-X)2]1+ (X = OMe, 2; NH2, 3), [Co2(BPMP)(μ-S-C6H4-o-O)]1+ (4), and [Co2(BPMP)(μ-Y)]1+ (Y = bdt, 5; tdt, 6; mnt, 7), has been synthesized from [Co2(BPMP)(MeOH)2(Cl)2]1+ (1a) and [Co2(BPMP)(Cl)2]1+ (1b), where BPMP1- is the anion of 2,6-bis[[bis(2-pyridylmethyl)amino]methyl]-4-methylphenol. While 2 and 3 could allow the two-electron redox reaction of the two coordinated thiolates with elemental sulfur (S8) to generate [Co2(BPMP)(μ-S5)]1+ (8), the complexes, 4-7, could not undergo a similar reaction. An analogous redox reaction of 2 with elemental selenium ([Se]) produced [{Co2(BPMP)(μ-Se4)}{Co2(BPMP)(μ-Se3)}]2+ (9a) and [Co2(BPMP)(μ-Se4)]1+ (9b). Further reaction of these polychalcogenido complexes, 8 and 9a/9b, with PPh3 allowed the isolation of [Co2(BPMP)(μ-S)]1+ (10) and [Co2(BPMP)(μ-Se2)]1+ (11), which, in turn, could be converted back to 8 and 9a upon treatment with S8 and [Se], respectively. Interestingly, while the redox reaction of the polyselenide chains in 9a and 11 with S8 produced 8 and [Se], the treatment of 8 with [Se] gave back only the starting material (8), thus demonstrating the different redox behavior of sulfur and selenium. Furthermore, the reaction of 8 and 9a/9b with activated alkynes and cyanide (CN-) allowed the isolation of the complexes, [Co2(BPMP)(μ-E2C2(CO2R)2)]1+ (E = S: 12a, R = Me; 12b, R = Et; E = Se: 13a, R = Me; 13b, R = Et) and [Co2(BPMP)(μ-SH)(NCS)2] (14), respectively. The present work, thus, provides an interesting synthetic strategy, interconversions, and detailed comparative reactivity of binuclear Co(II)-polychalcogenido complexes.

Electronic structures, bonding aspects and spectroscopic parameters of homo/hetero valent bridged dinuclear transition metal complexes

Bridged dinuclear metal complexes have fascinated scientists worldwide, and remarkable success has been achieved to unravel the electronic structures, structure-function relationship, coordination environments, and fine mechanistic details of the enzymes owing to the repercussion of biomimetic studies carried out on dinuclear model systems. Molecular level study of these systems integrated with spectroscopic study helps in gaining deep insights about structural and electronic aspects of natural enzymatic systems. Considering the same, here first time we report DFT study on bridged non-heme metal complexes based on N-Et-HPTB ligand system containing homovalent (M^IIM^II); {[(Mn^II)₂(O₂CCH₃)(N-Et-HPTB)]²⁺; Species I), [(Fe^II)₂(O₂CCH₃)(N-Et-HPTB)]²⁺; Species II), [(Co^II)₂(O₂CCH₃)(N-Et-HPTB)]²⁺; Species III)} and heterovalent (M^IIIM^II): {[(Mn^III)(Mn^II)(O₂)(N-Et-HPTB)]²⁺; Species Ia) [(Fe^III)(Fe^II)(O₂)(N-Et-HPTB)]²⁺; Species IIa) and [(Co^III)(Co^II)(O₂)(N-Et-HPTB)]²⁺; Species IIIa)} dinuclear metal centres. Bridging oxygen bears a significant spin density which may prompt important chemical reactions involving activation of bonds like C-H/O-H/N-H etc. TD-DFT calculations for UV-Visible absorption have been carried out to further shed light on structural-functional and electronic structures of these dinuclear species. Studying these dinuclear species may be a good starting point for the study of active sites of the bimetallic centre of dinuclear enzymes and thus may serve as fascinating spectroscopic models. Further, FMO analysis, MEP mapping, and NBO calculations were employed to analyze bonding aspects predict theoretical reactivity behaviour and any kind of stabilizing interactions present in the reported species.

Cobalt-Catalyzed Formation of Grignard Reagents via C-O or C-S Bond Activation

C(aryl)-OMe bond functionalization catalyzed by cobalt(II) chloride in combination with a nacnac-type ligand and magnesium as a reductant is reported. Borylation and benzoylation of aryl methoxides are demonstrated, and C(aryl)-SMe bond borylation can be achieved under similar conditions. This is the first example of achieving these transformations using cobalt catalysis. Mechanistic studies suggest that a Grignard reagent is generated as an intermediate in a rare example of a magnesiation via a C-O bond activation reaction. Indeed, an organomagnesium species could be directly observed by electrospray ionization mass spectroscopic analysis. Kinetic experiments indicate that a heterogeneous cobalt catalyst performs the C-O bond activation.

Catalytic Hydrolysis of Thiolates to Alcohols

A new and efficient catalytic hydrolysis of aliphatic and aromatic thiolates under ambient conditions is presented. Previously, we have demonstrated (Ganguly et al., Inorg. Chem. 2018, 57, 11306-11309) the Co(II) mediated stoichiometric hydrolysis of thiols to produce alcohols/phenols along with a binuclear dicobalt(II)-hydrosulfide complex, [Co₂(PhBIMP)(μ₂-SH)(DMF)]²⁺ (1) (PhBIMP is the anion of 2,6 bis[(bis((N-1-methyl-4,5- diphenylimidazoylmethyl) amino)methyl]- 4-methylphenol). In the present work, we have shown that the product of the stoichiometric reaction, 1, may act as an efficient catalyst for the catalytic hydrolysis of a broad range of aliphatic and aromatic thiolates in DMF at room temperature to produce alcohols/phenols. Complex 1 takes up a thiolate (RS^-) and a water molecule to generate an active intermediate complex, [Co₂(PhBIMP)(μ₂-SH)(RS)(H₂O)]¹⁺ (2), which, in turn, releases the alcohol/phenol (ROH), hydrosulfide (HS^-), and regenerates 1.

Polysulfido Chain in Binuclear Zinc(II) Complexes

The synthesis and a detailed reactivity study of a binuclear zinc(II) bis(benzenethiolate) complex, [Zn₂(BPMP)(SPh)₂]⁺ (4), and an unprecedented binuclear zinc(II) pentasulfido complex, [Zn₂(BPMP)(μ₂-S₅)]⁺ (6), are presented. While one-electron oxidation of the coordinated benzenethiolate ligands in 4 by Cp₂Fe⁺ produces diphenyl disulfide and [Zn₂(BPMP)(μ₂-OH)]²⁺ (5), a two-electron redox reaction between coordinated benzenethiolate ligands in 4 and elemental S (S₈) generated diphenyl disulfide and the binuclear zinc(II) pentasulfido complex 6. Complex 6 features a chelating, dianionic, pentasulfido (S₅^2-) chain and can consume up to a maximum of 3 equiv of PPh₃ to generate Ph₃PS and 5, while the reaction of 6 with 1 equiv of diphenylphosphinoethane allowed the isolation of [Zn₂(BPMP)(μ₂-S₄)]⁺ (7). A proteolysis reaction of the coordinated S₅^2- chain in 6 with fluoroboric acid (HBF₄), benzoic acid (PhCOOH), and thioacetic acid (MeCOSH) generates the complexes [Zn₂(BPMP)(MeCN)₂]³⁺ (1), [Zn₂(BPMP)(μ₂-PhCOO)₂]⁺ (8), and [Zn₂(BPMP)(μ₂-SCOMe)₂]⁺ (9), respectively, while the protonated S₅^2- chain liberates S₈ and hydrogen sulfide (H₂S). Finally, the transfer of the coordinated benzenethiolate ligands in 4 and the S₅^2- chain in 6 to selected organic compounds, namely, PhCH₂Br and PhC(O)Cl, for the generation of various organosulfur compounds is demonstrated.

A Tetradentate Phosphonate Ligand-based Ni-MOF as a Support for Designing High-performance Proton-conducting Materials

Developing a robust metal-organic framework (MOF) which facilitates proton hopping along the pore channels is very demanding in the context of fabricating an efficient proton-conducting membrane for fuel cells. Herein, we report the synthesis of a novel tetradentate aromatic phosphonate ligand H₈ L (L=tetraphenylethylene tetraphosphonic acid) based Ni-MOF, whose crystal structure has been solved from single-crystal X-ray diffraction. Ni-MOF [Ni₂ (H₄ L)(H₂ O)₉ (C₂ H₇ SO)(C₂ H₇ NCO)] displays a monoclinic crystal structure with a space group of P 2₁ /c, a=11.887 Å, b=34.148 Å, c=11.131 Å, α=γ=90°, β=103.374°, where a nickel-hexahydrate moiety located inside the void space of the framework through several H-bonding interactions. Upon treatment of the Ni-MOF in different pH media as well as solvents, the framework remained unaltered, suggesting the presence of strong H-bonding interactions in the framework. High framework stability of Ni-MOF bearing H-bonding interactions motivated us to explore this metal-organic framework material as proton-conducting medium after external proton doping. Due to the presence of a large number of H-bonding interactions and the presence of water molecules in the framework we have carried out the doping of organic p-toluenesulfonic acid (PTSA) and inorganic sulphuric acid (SA) in this Ni-MOF and observed high proton conductivity of 5.28×10^-2  S cm^-1 at 90 °C and 98% relative humidity for the SA-doped material. Enhancement of proton conductivity by proton doping under humid conditions suggested a very promising feature of this Ni-MOF.

Thiolate Coordination vs C-S Bond Cleavage of Thiolates in Dinickel(II) Complexes

A detailed study for the synthesis of dinickel(II)-thiolate and dinickel(II)-hydrosulfide complexes and the complete characterization of the relevant intermediates involved in the C-S bond cleavage of thiolates are presented. Hydrated Ni(II) salts mediate the hydrolytic C-S bond cleavage of thiolates (NaSR/RSH; R = Me, Et, ⁿBu, ^tBu), albeit inefficiently, to yield a mixture of a dinickel(II)-hydrosulfide complex, [Ni₂(BPMP)(μ-SH)(DMF)₂]²⁺ (1), and the corresponding dinickel(II)-thiolate complexes, such as [Ni₂(BPMP)(μ-SEt)(ClO₄)]¹⁺ (2) (HBPMP is 2,6-bis[[bis(2-pyridylmethyl)amino]methyl]-4-methylphenol). A systematic study for the reactivity of thiolates with Ni(II) was therefore pursued which finally yielded 1 as a pure product which has been characterized in comparison with the dinickel(II)-dichloride complex, [Ni₂(BPMP)(Cl)₂(MeOH)₂]¹⁺ (3). While the reaction of thiolates with anhydrous Ni(OTf)₂ in dry conditions could only yield [Ni₂(BPMP)(OTf)₂]¹⁺ (5) instead of the expected dinickel(II)-thiolate compound, the C-S bond cleavage could be suppressed by the use of a chelating thiol, such as PhCOSH, to yield [Ni₂(BPMP)(SCOPh)₂]¹⁺ (6). Finally, with the suitable choice of a monodentate thiol, a dinickel(II)-monothiolate complex, [Ni₂(BPMP)(SPh)(DMF)(MeOH)(H₂O)]²⁺ (7), was isolated as a pure product within 1 h of reaction, which after a longer time of reaction yielded 1 and PhOH. Complex 7 may thus be regarded as the intermediate that precedes the C-S bond cleavage and is generated by the reaction of a thiolate with an initially formed dinickel(II)-solvento complex, [Ni₂(BPMP)(MeOH)₂(H₂O)₂]³⁺(4). Selected dinickel(II) complexes were explored further for the scope of substitution reactions, and the results include the isolation of a dinickel(II)-bis(thiolate) complex, [Ni₂(BPMP)(μ-SPh)₂]¹⁺ (8).

Synthesis and redox reactions of binuclear zinc(ii)–thiolate complexes with elemental sulfur

The synthesis, characterization and reactivity of a series of binuclear zinc(ii) complexes are described featuring the redox reaction of coordinated thiolates with elemental sulfur.

Hydrosulfide complexes of the transition elements: diverse roles in bioinorganic, cluster, coordination, and organometallic chemistry

Molecules containing transition metal hydrosulfide linkages are diverse, spanning a variety of elements, coordination environments, and redox states, and carrying out multiple roles across several fields of chemistry.

Transfer of hydrosulfide from thiols to iron(ii): a convenient synthetic route to nonheme diiron(ii)–hydrosulfide complexes

The synthesis and reactivity of an unprecedented nonheme diiron(ii)–hydrosulfide complex via Fe(ii) mediated C–S bond cleavage of thiols.