Conventional and Mechanochemical Syntheses of Copper(I) Iodide Luminescent MOF with Bis(amidoquinoline) and Its Application for the Detection of Amino Acid in Aqueous Solution

Zn-MOFs composites loaded with silver nanoparticles are used for fluorescence sensing pesticides, Trp, EDA and photocatalytic degradation of organic dyes

The abuse of pesticides, antibiotics, organic solvents, etc., not only deteriorates the ecological environment, but even affects the normal development of organisms, posing a serious threat to global public health.Efficient and sensitive detection of pesticides, antibiotics, organic solvents and so on are very important, but also a challenge to scientists. By depositing Ag nanoparticles on the surface of Zn-MOF (1: {[Zn₂(bta)(bpy)(H₂O)₂]·2H₂O}_n), a new type of composite material (Ag@1) was successfully synthesized and analyzed by TEM, EDS, XPS, XRD, IR and other characterization methods. Ag@1 can serve as multi-response fluorescence sensor to detect pesticides (fluazinam (FLU) and emamectin benzoate (EMB)), Tryptophan (Trp) and Ethylenediamine (EDA). In particular, Ag@1 showed "turn-off" fluorescence sensing for FLU and EDA, and "turn-on" fluorescence sensing for EMB and Trp. It is worth mentioning that we further explored its analysis of FLU and Trp in real water samples and fetal bovine serum. The recoveries are satisfactory, 97.95 % - 102.39 % and 96.69 % - 101.85 %, respectively. In addition, the photocatalytic performance of Ag@1 was found to be excellent, the degradation rate of methylene blue (MB) reached 86 %, and its degradation mechanism was discussed.

Stable terbium metal-organic framework with turn-on and blue-shift fluorescence sensing for acidic amino acids (L-aspartate and L-glutamine) and cations (Al3+ and Ga3+)

A terbium-based metal-organic framework, namely {[Tb₂(ADIP)(H₂ADIP)(HCOOH)(H₂O)₂]·2DMF·2H₂O}_n (Tb-MOF, H₄ADIP = 5,5'-(anthracene-9,10-diyl) diisophthalic acid), was synthesized and characterized. The single-crystal structure analysis shows that the Tb-MOF crystallizes in the C₂/_C space group in the monoclinic system and its asymmetric unit contains two Tb^III ions, one ADIP^4-, one H₂ADIP^2-, one coordinating formic acid and two coordination water molecules. Tb-MOF has a three-dimensional porous structure with a porosity of 41.5%. Tb-MOF is a highly selective and sensitive fluorescence turn-on and blue-shift sensor for L-aspartate (Asp), L-glutamine (Glu), Al³⁺ and Ga³⁺with detection limits of 0.25, 0.23, 0.069 and 0.079 μM, respectively. Experimental studies and theoretical calculations show that the sensing process is mainly attributed to the energy transfer and the absorbance caused enhancement (ACE) mechanism. Therefore, Tb-MOF is a good multi-response fluorescence sensor for acidic amino acids and Al³⁺, Ga³⁺cations.

Turn-on and blue-shift fluorescence sensor toward L-histidine based on stable CdII metal-organic framework with tetranuclear cluster units

A novel Cd^II-based two-fold interpenetrated metal-organic framework (MOF), namely {[Cd₂(BTDB)₂(4,4-bpy)]·DMF}_n (JXUST-14), (H2BTDB = 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid and 4,4-bpy = 4,4-bipyridine), has been prepared and characterized. Single-crystal structure determination reveals that JXUST-14 has a tetranuclear cluster based 6-connected pcu topological network with Schlafli symbol {4¹²·6³}. When soaked in common organic solvents and aqueous solutions with diverse pH values of 2-12 for 48 h, JXUST-14 remains stable. JXUST-14 is a highly selective and sensitive luminescent sensor for L-histidine (His) with a detection limit of 11.1 ppm. JXUST-14 is the first Cd^II-based MOF for the detection of His via turn-on and fluorescence blue-shift effects. Experimental study and theoretical calculation suggest that the sensing process can be mainly attributed to a charge transfer and energy transfer mechanism. More interestingly, LED lamps of JXUST-14 and JXUST-14@His were successfully developed, which endowed efficient sensitivity for His detection and thus provide great potential for future applications.

An aggregation-induced emissive pyridoxal derived tetradentate Schiff base for the fluorescence turn-off sensing of copper(ii) in an aqueous medium

An aggregation-induced emissive pyridoxal derived tetradentate Schiff base was developed for the fluorescence sensing of copper(ii) and sulphide ions.

Zinc(ii) Schiff base complexes as dual probes for the detection of NH4+ and HPO42− ions

Three novel Zn(ii) Schiff base complexes were obtained by solvent evaporation technique. 1 and 2 show selectively recognition of NH4+ and HPO42− accompanied with an efficient fluorescence “turn off” phenomenon.

Advancement in functionalized luminescent frameworks and their prospective applications as inkjet-printed sensors and anti-counterfeit materials

Supramolecular luminescent frameworks with conjugated architectures exhibits interesting photophysical properties with phenomenal chemical and thermal stability. This has instigated global researchers towards its extensive application in toxic analyte detection and the formulation of anti-counterfeit materials. In correlation with this present scenario, luminescent metal-organic frameworks (LMOFs), possessing tailorable structural and functional properties and exceptional physicochemical features, have been categorized as emerging 'smart materials'. Interestingly, LMOFs have assisted in the rapid development of an effectual sensing platform and swift fabrication of anti-counterfeit materials on desirable substrates with the aid of 'Inkjet Printing', which is a viable, low-cost, and high-resolution technology. Inkjet printing is an excellent material deposition technique in the modern era owing to its easy settling over flexible substrates, simplistic emergence of large area image patterns with improved throughput, minimal cost, explicit resolution, and least waste generation. The present review provides state-of-the-art progress on LMOFs based (i) luminescent security ink fabrication with static and dynamic multinodal luminescent materials and (ii) sensory device formulation for the easy and instantaneous recognition of hazardous analytes through the 'Inkjet Printing' technology. This techno-chemical integration will be certainly beneficial to prevent the growth of counterfeit materials and monitor the bioaccumulation of hazardous analytes in our ecological system.

Convenient synthesis of copper(I) halide quasi-one-dimensional coordination polymers: their structures and solid-state luminescent properties

The heterogeneous reaction between copper(i) halide and pyridine derivative ligand in a suspension conveniently afforded luminescent copper(i) complexes. The progress of the reaction was confirmed by powder X-ray diffraction (PXRD) and thermogravimetric (TG) measurements. The structure of the obtained complexes was clarified by comparison with the X-ray analysis of a single crystal obtained by the homogeneous reaction in a solution. The reaction was affected by the type of solvent and substituents on the pyridine ligand. The reaction proceeded quantitatively, not depending on copper(i) halide, when ethyl acetate and 3-bromopyridine were used as the solvent and ligand, respectively. X-ray analysis of the single-crystals obtained by the corresponding reaction in solution revealed that the reaction in suspension afforded the same stair-shaped quasi-one-dimensional structure. The obtained copper(i) complex powders displayed luminescence, which was attributed to the halide/metal-to-ligand charge transfer (XMLCT), as elucidated by crystal orbital distribution and principal component of excitation based on density functional theory (DFT) calculations.

Coordination-driven assembly of a 3d-4f heterometallic organic framework with 1D Cu4I4 and Eu-based chains: syntheses, structures and various properties

A three-dimensional porous 3d-4f heterometallic organic framework, namely, {[Eu3(Cu4I4)3(INA)9(DMF)4]·3DMF}n (YNU-2), was successfully prepared under solvothermal conditions. There are two different one-dimensional metal chains in the structure, namely, Cu4I4 and EuIII-based chains, resulting in an excellent stability of the prepared sample. A N2 sorption isotherm at 77 K revealed that the activated sample exhibits a Brunauer-Emmett-Teller surface area of 371 m2 g-1, while, YNU-2 can adsorb obviously higher CO2 amounts than CH4 at 273 K and 298 K under 1 atm because of the stronger interaction force between CO2 and the porous skeleton. Furthermore, YNU-2 is highly efficient heterogeneous catalyst for chemical fixation of the CO2 and epoxides into cyclic carbonates with a preferable recyclability. Taking into account its excellent stability, the prepared sample can be used to construct an electrochemical adapter sensor for detecting cocaine with a detection limit of 0.27 pg mL-1 in the wide range of 0.001-0.5 ng mL-1.

Quantitative Thermal Synthesis of Cu(I) Coordination Polymers That Exhibit Thermally Activated Delayed Fluorescence

As a new environmentally friendly route for synthesizing thermally activated delayed-fluorescence (TADF) Cu(I) complexes, we successfully and quantitatively synthesized strongly emissive Cu(I) coordination polymers [Cu₂I₂(PR₃)₂(n,n'-bpy)]_∞ (CuIR-n, R = Ph, Tol; n = 3, 4; bpy = bipyridine) via the quick thermal reaction of three starting materials (CuI, PR₃, and bpy organic ligands) for 1 h in the absence of a solvent. Powder X-ray diffraction and thermogravimetric analyses revealed that melting of the organic ligands significantly promoted the coordination polymerization reaction, and the stoichiometry of three starting materials was crucial to quantitatively affording CuIR-n. Notably, the photophysical properties of CuIR-n obtained by the thermal reaction were almost the same (emission wavelength, quantum yield, and lifetime) as that obtained by generally used solution reactions, probably because CuIR-n was thermally stable enough to prevent the thermal damage and to improve the crystallinity in the heating process. The emission origin of CuIR-n was assignable to TADF at 298 K and phosphorescence at 77 K originating from the metal-to-ligand charge-transfer excited state effectively mixed with the halide-to-ligand charge transfer ((M+X)LCT) state. Thus, the thermal reaction in the melted ligand could be a promising environmentally friendly method for producing TADF Cu(I) luminophores.

Two donor–acceptor (D–A) type Zn(ii) complexes as fluorescent probes for highly selective detection of iodide

Two noval donor-acceptor (D–A) type Zn(ii) complexes ([Zn₂(L¹)₂(MeCN)(MeOH)]·(MeCN) (1) and [ZnL²(H₂O)] (2)) were obtained and selectively detected iodide as fluorescent probes.

Three AIE-ligand-based Cu(i) coordination polymers: synthesis, structures and luminescence sensing of TNP

Cu(i) CPs were constructed for the first time with the AIE ligand DPMF; they exhibited distinct architectures and efficient detection of TNP.

State of the art methods and challenges of luminescent metal–organic frameworks for antibiotic detection

This review focuses on recent developments in the design and synthesis of luminescence MOFs for monitoring antibiotics.