Hydrolytically Stable Nanotubular Cationic Metal–Organic Framework for Rapid and Efficient Removal of Toxic Oxo-Anions and Dyes from Water

Photo-thermo synergistic permanganate decomposition over a hydrolytically stable Co(II)-MOF

Photo-thermo catalysis that combines photo- and thermo-catalysis has emerged as an attractive approach for effective and economical elimination of pollutants. Herein, we fabricated a robust, highly water stable 2D Co(II)-MOF photo-thermo catalyst towards the decomposition of permanganate anions. It has been demonstrated that Co(II)-MOF exhibits excellent catalytic capacity, good selectivity and incredible reusability for degrading MnO4-. The reaction rate of the process was investigated for thermo-photo vs. thermo/photo processes to provide conclusive evidence that Co(II)-MOF shows a strong synergistic use as both an energy source and Lewis acid.

Selective Adsorption of Dyes and Fe3+ Sensing via Tb3+ Incorporation in an Anionic Cadmium-Organic Framework

A three-dimensional (3D) anionic cadmium-organic framework, namely [(CH3)2NH2][Cd1.5(DMTDC)2] ⋅ 2DMA ⋅ 0.5H2O (Cd-MOF; DMA=N,N-dimethylacetamide), was successfully synthesized under solvothermal conditions by using a linear thienothiophene-containing dicarboxylate ligand, 3,4-dimethylthieno [2,3-b]-thiophene-2,5-dicar-boxylic acid (H2DMTDC). Single-crystal X-ray diffraction analysis reveals that Cd-MOF exhibits a 3D anionic framework with pcu α-Po topology, featuring rectangle and rhombus-shaped channels along b- and c- axis direction. Cd-MOF demonstrates selective adsorption of cationic dyes over anionic and neutral dyes. Additionally, Tb3+-loaded Cd-MOF serves as a fast-response fluorescence sensor for the sensitive detection of Fe3+ ions with a low limit of detection (8.90×10-7 M) through fluorescence quenching.

Two-Dimensional Cu-Based MOF for Selective Staining of the Cellular Nucleus through Fluorescence Imaging and Selective Sorption of Dye Molecules in Aqueous Medium

A two-dimensional copper-based metal-organic framework, [Cu(C23H14O6)(C10H8N2)2]·H2O·DMSO, 1, was synthesized using pamoic acid (C23H16O6) and 4,4'-bipyridine (C10H8N2) as an organic ligand and Cu(II) as a metal ion. Single-crystal structure X-ray diffraction studies of the as-synthesized compound showed a two- dimensional structure with free hydroxyl groups. Upon excitation at 370 nm, the aqueous dispersion of [Cu(C23H14O6)(C10H8N2)2]·H2O·DMSO, 1, showed emission centered at 525 nm resulting from the intraligand energy transfer. Fluorescence microscopic experiments using a human epithelioid cervix carcinoma HeLa cell line were carried out, clearly showing that our compound selectively stained the cellular nucleus. To utilize the porous nature of [Cu(C23H14O6)(C10H8N2)2]·H2O·DMSO, 1, its dye sorption behavior in aqueous solution was determined, and a high affinity for methylene blue (MB) dye was confirmed. Our synthesized compound sorbed 88% MB dye with an initial concentration of 32 mg L-1, and its sorption capacity for MB was found to be 29.79 mg g-1. The possible mechanism of the dye sorption behavior was discussed in terms of the size and charge of dye molecules with respect to molecular-level interactions between the framework and the dye molecules.

A mechanochemically synthesized Schiff-base engineered 2D mixed-linker MOF for CO2 capture and cationic dye removal

Developing synthetic strategies for smart materials for the adsorption and separation of toxic chemicals is of great importance. Metal-organic frameworks (MOFs) have been proven to be outstanding adsorbent materials that possess excellent pollutant removal performances in wastewater treatment, including dye recycling. In this work, a neutral Cd(II) based 2D framework with a dual ligand strategy involving -OH functionalized 5-hydroxyisophthalic acid (5-OH-H2IPA) and the amide decorated Schiff base ligand (E)-N'-(pyridin-4-ylmethylene)isonicotinohydrazide (L) has been synthesized by different synthetic routes and characterized by various analytical methods. Thus, crystals of {[Cd(5-OH-IPA)(L)]·CH3OH}n synthesized via diffusion (ADES-7D) and the phase pure bulk product synthesized by conventional reflux (ADES-7C) and the mechanochemical grinding method (ADES-7M) have been established using PXRD data of the respective product showing identical simulated SXRD data to those of ADES-7D. The mechanochemically synthesized ADES-7M possesses a better surface area and CO2 adsorption capability compared to ADES-7C, which is also supported by electron microscopy and particle size measurements. Furthermore, ADES-7 can be used as an efficient adsorbent material for the reversible, selective adsorption (42-99%) and separation of the cationic dyes malachite green (MG), methyl violet (MV), methylene blue (MB), and rhodamine B (RhB) from the mixture of cationic/anionic dyes (methyl orange (MO) and bromocresol green (BCG)) in the aqueous phase. Specifically, ADES-7M possesses better dye capture capability compared to ADES-7C, even in the case of the bigger dye RhB with adsorption differences of 2.38 to 1.01 mg g-1, respectively. The dye adsorption kinetics follows pseudo-second-order kinetics, and the dye adsorption isotherm fits well with the Langmuir/Freundlich adsorption isotherm models. The probable mechanism of adsorption involving the supramolecular interaction between the host MOF and the guest dye has also been proposed.

Innovations in metal-organic frameworks (MOFs): Pioneering adsorption approaches for persistent organic pollutant (POP) removal

Adsorption is a promising way to remove persistent organic pollutants (POPs), a major environmental issue. With their high porosity and vast surface areas, MOFs are suited for POP removal due to their excellent adsorption capabilities. This review addresses the intricate principles of MOF-mediated adsorption and helps to future attempts to mitigate organic water pollution. This review examines the complicated concepts of MOF-mediated adsorption, including MOF synthesis methodologies, adsorption mechanisms, and material tunability and adaptability. MOFs' ability to adsorb POPs via electrostatic forces, acid-base interactions, hydrogen bonds, and pi-pi interactions is elaborated. This review demonstrates its versatility in eliminating many types of contaminants. Functionalizing, adding metal nanoparticles, or changing MOFs after they are created can improve their performance and remove contaminants. This paper also discusses MOF-based pollutant removal issues and future prospects, including adsorption capacity, selectivity, scale-up for practical application, stability, and recovery. These obstacles can be overcome by rationally designing MOFs, developing composite materials, and improving material production and characterization. Overall, MOF technology research and innovation hold considerable promise for environmental pollution solutions and sustainable remediation. Desorption and regeneration in MOFs are also included in the review, along with methods for improving pollutant removal efficiency and sustainability. Case studies of effective MOF regeneration and scaling up for practical deployment are discussed, along with future ideas for addressing these hurdles.

Cationic Europium-Organic Framework for Chromatographic Column Separation of Ionic Dyes and Stimuli-Responsive Chromic Properties

A novel 3D europium-based cationic framework (Eu-CMOF) has been constructed solvothermally by employing a viologen derivative as an organic functional building unit. Notably, Eu-CMOF demonstrates its capability as a proficient aqueous-phase ion-exchange host, facilitating the remarkable rapid chromatographic column separation of new coccine and malachite green (NC3-/MG+), as well as new coccine and methylene blue (NC3-/MLB+), in mere 2 to 4 min. Adsorption thermodynamics and kinetics of anionic dyes demonstrate that Eu-CMOF exhibits a higher adsorption capacity for NC3-, as evaluated by the Langmuir model, reaching a value of 173 mg·g-1. The pseudo-second-order rate constant is determined to be 3.84 × 10-3 mg-1·g·min-1. Additionally, Eu-CMOF displays reversible photochromic and amine- and ammonia-induced vapochromic behaviors. Further mechanistic studies reveal that these chromic behaviors are primarily attributed to the generation of free viologen radical stimulated by Xe-light or electron-rich amine/ammonia. This research contributes to the development of advanced materials with applications in rapid chromatographic separation and stimuli-responsive chromic properties, showcasing the potential of Eu-CMOF as a versatile platform for practical applications.

Enhancement of Mass Transfer Process for Photocatalytic Reduction in Cr(VI) by Electric Field Assistance

The removal of Cr(VI), a highly-toxic heavy metal, from industrial wastewater is a critical issue in water treatment research. Photocatalysis, a promising technology to solve the Cr(VI) pollution problem, requires urgent and continuous improvement to enhance its performance. To address this need, an electric field-assisted photocatalytic system (PCS) was proposed to meet the growing demand for industrial wastewater treatment. Firstly, we selected PAF-54, a nitrogen-rich porous organic polymer, as the PCS's catalytic material. PAF-54 exhibits a large adsorption capacity (189 mg/g) for Cr(VI) oxyanions through hydrogen bonding and electrostatic interaction. It was then coated on carbon paper (CP) and used as the photocatalytic electrode. The synergy between capacitive deionization (CDI) and photocatalysis significantly promotes the photoreduction of Cr(VI). The photocatalytic performance was enhanced due to the electric field's influence on the mass transfer process, which could strengthen the enrichment of Cr(VI) oxyanions and the repulsion of Cr(III) cations on the surface of PAF-54/CP electrode. In addition, the PCS system demonstrates excellent recyclability and stability, making it a promising candidate for chromium wastewater treatment.

Alkyl modified cationic COFs for preferential trapping of charge dispersed perrhenate: Synergistic hydrophobicity and anion-recognition effects

Charge dispersed oxoanionic pollutants (such as TcO4- and ReO4-) with low hydrophilicity are typically difficult to be preferentially extracted. Recently, cationic covalent organic frameworks (COFs) have received considerable attention for anions trapping. Two cationic COFs, denoted as Tp-S and Tp-D, were synthesized by incorporating ethyl and cyclic alkylated diquats into 2,2'-bipyridine-based COF. A synergistic effect of hydrophobic channel and anion-recognition sites were achieved by branched chains, which effectively surmounted the Hofmeister bias. Both Tp-S and Tp-D exhibited raising removal performance for surrogate ReO4- at high acidity with adsorption capacities of 435.6 and 291.4 mg g-1, respectively. Obvious variations caused by side chains were displayed in microstructures and adsorption performance. Specially, compared with Tp-D, Tp-S demonstrated desirable priority in uptake capacity and selectivity. In a real-scenario experiment, Tp-S could remove 72.8 % of ReO4- in a simulated Hanford LAW stream, which was attributed to the spatial effects and charge distribution arising from the open and flexible side chains of Tp-S. Otherwise, the rigid cyclic chains endowed pyridine-base Tp-D material an unprecedented alkaline stability. Spectra and theoretical calculations revealed a mechanism of preferential capture based on electrostatic interaction and hydrogen bonding between charge dispersed ReO4-/TcO4- and Tp-S/Tp-D. This work provides an innovative perspective to tailored materials for the treatment of oxoanionic contaminants.

Coordination-Driven Heterochiral Self-Assembly: Construction of Cd(II) Coordination Polymers with Sorption Behaviors for Iodine and Dyes

A racemic bispyridyl ligand (L) was synthesized via a Schiff base condensation reaction. Four Cd(II) complexes, {[CdL2Cl2]·2DMF}n (1), [CdLI2]n (2), {[CdL2Br2]·4H2O}n (3), and {[CdL2(H2O)2](NO3)2·2CH3OH·8H2O}n (4), were synthesized and further characterized based on this ligand. Single-crystal structures show that the coordination-driven assembly of the bispyridyl ligand with Cd(II) salts bearing different counteranions can lead to multidimensional coordination polymers via a heterochiral self-discrimination process. Complex 1 exists as a one-dimensional (1D) looped chain polymer, and complex 2 exists as a 1D zigzag chain polymer. Complex 3 is a 2D grid coordination polymer, and complex 4 exists as a 3D framework polymer. Furthermore, the iodine sorption capacities of the four complexes were investigated in the solution of n-hexane and water as well as in the iodine steam. The dye sorption behaviors were investigated in water, which showed that complex 2 exhibited good adsorption for crystal violet (CV), while complex 4 had good adsorption capability toward direct yellow 4 (DY).

Porous amorphous metal-organic frameworks based on heterotopic triangular ligands for iodine and high-capacity dye adsorption

The research on amorphous metal-organic frameworks (aMOFs) is still in its infancy, and designing and constructing aMOFs with functional pores remains a challenge. Two aMOFs based on Co(II) and heterotopic triangular ligands with large conjugated aromatic planes, namely aMOF-1 and aMOF-2, were constructed and characterized by IR, XPS, EA, ICP, XANS and so on. aMOF-1 possesses mesopores, whereas aMOF-2 possesses micropores. The porosity, conjugated aromatic plane and uncoordinated N atoms in the framework allow these aMOFs to adsorb iodine and dyes. The iodine adsorption capacity of aMOF-1 is 3.3 g per g, which is higher than that of aMOF-2 (0.56 g per g), mainly due to the expansion or swelling of aMOF-1 after iodine adsorption. The uptake of cationic dyes by aMOF-2 showed more rapid kinetics and a higher removal rate than that by aMOF-1, mainly due to the difference in the porosity and surface charge. Although the surface charges of aMOF-1 and aMOF-2 are negative, both of them showed significantly faster adsorption kinetics toward anionic dyes, among which methyl orange (MO) and Congo red (CR) can be removed in 5 min. This occurs possibly because the quick adsorption of Na+ ions alters the surface charge of the framework and promotes dye uptake. The adsorption capacities of aMOF-1 for MO and CR reached 921 and 2417 mg g-1, respectively. The correlation data for aMOF-2 are 1042 and 1625 mg g-1, respectively. All adsorption capacities are among the highest compared to many cMOFs. Adsorption in mixed dye solution is found to be charge-dependent, kinetic-dependent, and synergetic in these systems. The porosity, surface charge regulation during adsorption, weak interactions and multiple adsorption processes contribute to the dye adsorption performance.

An Anionic Porous Indium-Organic Framework with Nitrogen-Rich Linker for Efficient and Selective Removal of Trace Cationic Dyes

Metal-organic frameworks (MOFs) with porosity and functional adjustability have great potential for the removal of organic dyes in the wastewater. Herein, an anionic porous metal-organic framework (MOFs) [Me₂NH₂]₂In₂[(TATAB)₄(DMF)₄]·(DMF)₄(H₂O)₄ (HDU-1) was synthesized, which is constructed from a [In(OOC)₄]^- cluster and a nitrogen-rich linker H₃TATAB (4,4',4″-s-triazine-1,3,5-triyltri-p-aminobenzoic acid). The negatively charged [In(OOC)₄]^- cluster and uncoordinated -COOH on the linker result in one unit cell of HDU-1 having 8 negative sites. The zeta potential of -20.8 mV dispersed in pure water also shows that HDU-1 possesses negatively charged surface potential. The high electronegativity, water stability, and porosity of HDU-1 can facilitate the ion-exchange and Coulombic interaction. As expected, the HDU-1 exhibits high selectivity and removal rates towards trace cationic dyes with suitable size, such as methylene blue (MB) (96%), Brilliant green (BG) (99.3%), and Victoria blue B (VB) (93.6%).

Metal-organic framework derived FeNi alloy nanoparticles embedded in N-doped porous carbon as high-performance bifunctional air-cathode catalysts for rechargeable zinc-air battery

Developing efficient and durable bifunctional air-cathode catalysts for both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is one of the key efforts promoting the practical rechargeable zinc-air batteries (ZABs). In this paper, high-performance bifunctional air-cathode catalysts by a two-step strategy: atomically dispersed Ni on N-doped carbon is first derived from MOF to form uniformly dispersed NiNC, which are pyrolyzed together with Fe source at different high-temperatures to form FeNi@NC-T (T = 800, 900, and 1000 °C) catalysts. The as-synthesized non-noble metal FeNi@NC-900 catalyst exhibits a considerably small potential gap (ΔE) of 0.72 V between ORR and OER, which is as the same as commercial noble metal Pt/C + Ir black mixed catalyst. The performance of the ZABs using FeNi@NC-900 as the air-cathode catalyst displays a power density of 119 mW·cm^-2 and a specific capacity of 830.1 mAh·g^-1, which is superior to that of Pt/C + Ir black mixed catalyst. This work provides a guideline for designing alloy electrocatalysts with uniform size and nanoparticle distribution for metal-air batteries with bifunctional air-cathodes.

Research on Improved MOF Materials Modified by Functional Groups for Purification of Water

With the rapid development of urbanization and industrialization, water contamination has gradually become a big problem. Relevant studies show that adsorption is an efficient strategy to treat pollutants in water. MOFs are a class of porous materials with a three-dimensional frame structure shaped by the self-assembly of metal centers and organic ligands. Because of its unique performance advantages, it has become a promising adsorbent. At present, single MOFs cannot meet the needs, but the introduction of familiar functional groups on MOFs can promote the adsorption performance of MOFs on the target. In this review, the main advantages, adsorption mechanism, and specific applications of various functional MOF adsorbents for pollutants in water are reviewed. At the end of the article, we summarize and discuss the future development direction.

Sustainable carbon nano-onions as an adsorbent for the efficient removal of oxo-anions

The increasing threats of oxo-anions in drinking water have posed a serious threat to human health, aquatic environment, ecology, and sustainability. Accordingly, developments of cost-effective and sustainable nanomaterials for water remediation are on top priority and highly sought in global research community. Carbon nano-onions (CNOs) are one of the emerging nanomaterials for water purification because of its unique morphology, surface reactivity, high density of surface-active sites, and microporous structure. Herein, flaxseed oil-derived CNOs are utilized as efficient adsorbent for the removal of toxic oxo-anions. Aside from the green and economic nature, CNOs provide high adsorption efficiency ~ 806.45 mg g^-1 for the removal of [Formula: see text] (99.9%) from aqueous system at ambient temperature, neutral pH in 70 min. The adsorption of [Formula: see text] onto CNOs was well fitted in pseudo-second order kinetics and followed the Langmuir adsorption isotherm model. The adsorption process was determined to be exothermic and spontaneous from the resulting thermodynamic characteristics. Furthermore, the high hydrophobic nature of CNOs make it recycling simpler. The real-life applicability of CNOs towards [Formula: see text] removal was tested in tap water, river water, and dam water. With all these observed results, CNOs show promise for practical water remediation applications.

Recent advances in application of metal-organic frameworks (MOFs) as adsorbent and catalyst in removal of persistent organic pollutants (POPs)

The presence of persistent organic pollutants (POPs) in the aquatic environment is causing widespread concern due to their bioaccumulation, toxicity, and possible environmental risk. These contaminants are produced daily in large quantities and released into water bodies. Traditional wastewater treatment plants are ineffective at degrading these pollutants. As a result, the development of long-term and effective POP removal techniques is critical. In water, adsorption removal and photocatalytic degradation of POPs have been identified as energy and cost-efficient solutions. Both technologies have received a lot of attention for their efforts to treat the world's wastewater. Photocatalytic removal of POPs is a promising, effective, and long-lasting method, while adsorption removal of persistent POPs represents a simple, practical method, particularly in decentralized systems and isolated areas. It is critical to develop new adsorbents/photocatalysts with the desired structure, tunable chemistry, and maximum adsorption sites for highly efficient removal of POPs. As a class of recently created multifunctional porous materials, Metal-organic frameworks (MOFs) offer tremendous prospects in adsorptive removal and photocatalytic degradation of POPs for water remediation. This review defines POPs and discusses current research on adsorptive and photocatalytic POP removal using emerging MOFs for each type of POPs.

Two Cu(i) coordination polymers based on a new benzimidazolyl-tetrazolyl heterotopic ligand for visible-light-driven photocatalytic dye degradation

Two Cu(i) CPs based on a new heterotopic tripodal ligand were constructed and their visible-light-driven photocatalytic performance were studied.

Selective Chromium(VI) Trapping by an Acetate-Releasing Coordination Polymer

We report the high-capacity and selective uptake of Cr(VI) from water using the coordination polymer silver bipyridine acetate (SBA, [Ag(4,4'-bipy)][CH₃CO₂]·3H₂O). Cr capture involves the release of acetate, and we have structurally characterized two of the product phases that form: silver bipyridine chromate (SBC, SLUG-56, [Ag(4,4'-bipy)][CrO₄]_0.5·3.5H₂O) and silver bipyridine dichromate (SBDC, SLUG-57, [Ag(4,4'-bipy)][Cr₂O₇]_0.5·H₂O). SBA maintains a high Cr uptake capacity over a wide range of pH values (2-10), reaching a maximum of 143 mg Cr/g at pH 4. This Cr uptake capacity is one of the highest among coordination polymers. SBA offers the additional benefits of a one-step, room temperature, aqueous synthesis and its release of a non-toxic anion following Cr(VI) capture, acetate. Furthermore, SBA capture of Cr(VI) remains >97% in the presence of a 50-fold molar excess of sulfate, nitrate, or carbonate. We also investigated the Cr(VI) sequestration abilities of silver 1,2-bis(4-pyridyl)ethane nitrate (SEN, [Ag(4,4'-bpe)][NO₃]) and structurally characterized the silver 1,2-bis(4-pyridyl)ethane chromate (SEC, SLUG-58, [Ag(4,4'-bpe)][CrO₄]_0.5) product. SEN was, however, a less effective Cr(VI) sequestering material than SBA.

Twofold Interpenetrated Cationic Metal-Organic Framework with Hydrophobic Channels for Effectively Trapping Toxic Oxo-Anions

Sequestration of toxic oxo-anions (such as ⁹⁹TcO₄^- and ClO₄^-) from wastewater has received constant attention due to the existing serious threat to public health and the sustainability of the environment. In view of the low energy of hydration of TcO₄^- and ClO₄^-, cationic metal-organic framework (MOF) materials with the hydrophobic microenvironment are preferred in the selection of sorbents. Herein, a twofold interpenetrated cationic MOF (ZJU-X15) with double-helical chains was constructed by tetrakis[4-(pyridin-4-yl)phenyl]ethene (TPPE) and Cd²⁺ for the elimination of ⁹⁹TcO₄^- and ClO₄^-. Profiting from hydrophobic channels, ZJU-X15 could remove most of ReO₄^- (a surrogate for ⁹⁹TcO₄^-) and ClO₄^- in less than 10 and 20 min, respectively. As the result of batch experiments, ZJU-X15 could capture 356 mg of ReO₄^- and 221 mg of ClO₄^- per 1 g of sorbent, showcase decent selectivity, and still maintain high removal efficiency for anions after four recycles. Furthermore, the process of anion-exchange was confirmed by ion chromatography, Fourier-transform infrared spectroscopy, scanning electron microscopy combined with an energy-dispersive X-ray spectrometer, and X-ray photoelectron spectroscopy, indicating that target anions successfully entered into the body of ZJU-X15 through anion exchange.

Photocatalytic Degradation of Tetracycline by Supramolecular Materials Constructed with Organic Cations and Silver Iodide

Photocatalytic degradation, as a very significant advanced oxidation technology in the field of environmental purification, has attracted extensive attention in recent years. The design and synthesis of catalysts with high-intensity photocatalytic properties have been the focus of many researchers in recent years. In this contribution, two new supramolecular materials {[(L1)·(Ag4I7)]CH3CN} (1), {[(L2)·(Ag4I7)]CH3CN} (2) were synthesized by solution volatilization reaction of two cationic templates 1,3,5-Tris(4-aminopyridinylmethyl)-2,4,6-Trimethylphenyl bromide (L1) and 1,3,5-Tris(4-methyl pyridinyl methyl)-2,4,6-trimethylphenyl bromide (L2) with metal salt AgI at room temperature, respectively. The degradation effect of 1 and 2 as catalyst on tetracycline (TC) under visible light irradiation was studied. The results showed that the degradation of TC by 1 was better than that by 2 and both of them had good stability and cyclability. The effects of pH value, catalyst dosage, and anion in water on the photocatalytic performance were also investigated. The adsorption kinetics fit the quasi-first-order model best. After 180 min of irradiation with 1, the degradation rate of TC can reach 97.91%. In addition, the trapping experiments showed that ·OH was the main active substance in the photocatalytic degradation of TC compared with ·O2− and h+. Because of its simple synthesis and high removal efficiency, catalyst 1 has potential value for the treatment of wastewater containing organic matter.

Development of Cationic Benzimidazole-Containing UiO-66 through Step-by-Step Linker Modification to Enhance the Initial Sorption Rate and Sorption Capacities for Heavy Metal Oxo-Anions

Effective and rapid capture of heavy metal oxo-anions from wastewater is a fascinating research topic, but it remains a great challenge. Herein, benzimidazole and -CH₃ groups were integrated into UiO-66 in succession via a step-by-step linker modification strategy that was performed by presynthesis modification (to give Bim-UiO-66) and subsequently by postsynthetic ionization (to give Bim-UiO-66-Me). The UiO-66s (UiO-66, Bim-UiO-66, and Bim-UiO-66-Me) were applied in the removal of heavy metal oxo-anions from water. The two benzimidazole derivatives (Bim-UiO-66 and Bim-UiO-66-Me) showed much better performance than UiO-66, as both the initial sorption rate and sorption capacities decreased in the order Bim-UiO-66-Me > Bim-UiO-66 > UiO-66. The maximum performances of Bim-UiO-66 are 5.1 and 1.7 times those of UiO-66. Remarkably, Bim-UiO-66-Me shows 7.5 and 3.0 times better performance than UiO-66. The higher absorptivity of cationic Bim-UiO-66-Me compared with UiO-66 can be attributed to a strong Coulombic interaction as well as an anion-π interaction and hydrogen bonding between the benzimidazolium functional group and heavy metal oxo-anions. The as-synthesized Bim-UiO-66-Me not only provides a promising candidate for application in removal of heavy metal oxo-anions in wastewater treatment but also opens up a new strategy for the design of high-performance adsorbents.

Synthesis and Characterization Bimetallic Organic Framework CoxFex(BDC) and Adsorption Cationic and Anionic Dyes

Co-doped Fe-MOF bimetallic organic framework materials at different ratios were synthesized based on the solvothermal method, and we evaluated their morphological characteristics by modern analytical methods such as SEM, XRD, FT-IR, and isotherm of nitrogen adsorption-desorption (BET). The specific surface area of the 0.3 CoFe-MOF sample (280.9 m2/g) is much larger than the Fe-MOF and samples at other ratios. The post-synthesized materials were evaluated for their ability to absorb various dyes, including Methylene Blue (MB), Methyl orange (MO), Congo red (CR), and Rhodamine (RhB), and evaluated for the effects of pH, the initial concentration of the dye solution, time, and dose of adsorbent. The results show that the 0.3 CoFe-MOF material has a high adsorption capacity that is superior to both the original Fe-MOF and the CoFe-MOFs at other ratios. The highest adsorption capacity of MB dye by 0.3 CoFe-MOF reaches up to 562.1 mg/g at pH 10, the initial concentration of MB of 200 mg/L, after 90 min. The charged properties of the dyes and the charged nature of the bimetallic organic frameworks are best demonstrated through the adsorption of dye mixtures. The adsorption efficiency on the mixed system of cationic (MB) and anionic (MO) dyes yielded the highest removal efficiency of 70% and 81%, respectively, after 30 min. Therefore, the research has opened up the potential application of M/Fe-MOF modified materials and CoFe-MOF in organic dyes adsorption in wastewater treatment for environmental protection.

Substituent Dependence on Series of Cationic Gyroidal MOFs in utc-c Topology with High CO2 Affinity and Ultrahigh Anionic Dye Adsorption Capacity

A substituent decorating strategy for modification of the functional cavity is of great importance in the design of metal-organic frameworks (MOFs). Herein, three new isostructural cationic MOFs, [Cu₃(Xpip)₂]·NO₃·nH₂O (Xpip stands for X-substituted phenylimidazophenanthroline, where X = adm (SCNU-2), f (SCNU-3), and none for SCNU-4), have been successfully synthesized and shown gyroidal utc-c topology and large pore sizes which can be adjusted by different substituents (-N(CH₃)₂, -F, and -H). Interestingly, the differences of the substituents (sizes and proton donor/acceptor) show essential effects on the adsorption abilities of carbon dioxide and dyes, where SCNU-4 exhibits the highest CO₂ affinity and the biggest adsorption capacity for anionic dyes Fluorescein Sodium, and SCNU-3 adsorbs the largest amount (1503.6 mg/g) of Acid Fuchsin to date for the reported porous materials. The detailed studies in adsorption kinetics, adsorption isotherms, and theoretical calculation of the binding energies between the structures and dye molecules confirm that the electric properties of the frameworks (cationic) and substituents directed to the pore surface are two important factors dramatically affecting the selective dye adsorption.

Encapsulation-Led Adsorption of Neutral Dyes and Complete Photodegradation of Cationic Dyes and Antipsychotic Drugs by Lanthanide-Based Macrocycles

Molecular architectures offering large cavities can accommodate guest molecules, while their compositional engineering allows tunability of the band gap to support photocatalysis using visible light. In this work, two lanthanide (Ln)-based macrocycles, synthesized using a cobalt-based metalloligand and offering large rectangular cavities, exhibited selective adsorption of neutral dyes over both anionic and cationic dyes. Both Ln macrocycles illustrated complete photodegradation of cationic dyes using visible light without the use of any oxidant. Both Ln macrocycles exhibited complete photodegradation of not only cationic dyes but also a few phenothiazine-based antipsychotic drugs. Photocatalysis involved the generation of reactive oxygen species (ROS), which was corroborated with the band gap of two Ln macrocycles. These results were supported by radical scavenger studies and the quantitative estimation of superoxide and hydroxyl radicals. Complete photodegradation of both dyes and drugs was confirmed by spectral studies, while the generation of CO₂ and N₂ gases was established by gas chromatography. Importantly, Ln macrocycles were able to distinguish between the neutral dyes that were quantitatively adsorbed and the cationic dyes/drugs that were completely photodegraded.

Cu(II) and Zn(II) frameworks constructed by directional tuning of diverse substituted groups on a triazine skeleton and supermassive adsorption behavior for iodine and dyes

The controllable design, synthesis and functional properties of a series of triazine tetratopic carboxylic MOFs have always been hotspots and challenges for research. Based on the characterization of the C-Cl bond on the triazine skeleton being easily substituted by some functional groups, we designed and synthesized a series of triazine tetratopic carboxylic Cu(II) and Zn(II) MOFs via the reaction of Cu(NO₃)₂·2.5H₂O and ZnSO₄·7H₂O, as well as triazine tetratopic carboxylic H₄TDBA-Cl (H₄TBDA-Cl = 5,5'-((6-chloro-1,3,5-triazine-2,4-diyl)bis(azanediyl))diisophthalic acid) under hydrothermal conditions. During the process of synthesizing, the C-Cl bond on the triazine skeleton of the ligand was substituted with different groups, which formed the complexes ([Cu₂(TBDA-Cl)(H₂O)·10DMF·30H₂O]_n) (DMF = N,N-dimethylformamide) (1), N(Me)₂ -[(CH₃)₂NH₂]₄·[Zn₃(HTBDA-N)₂(SO₄)₂]_n (2) and H ([Cu₂(TBDA-H)(H₂O)]_n) (3), respectively. It is worth noting that the in situ substitution reaction occurred for complexes 2 and 3 during the process of synthesis. Also, the structural analysis showed that the molecules in complexes 1-3 were connected with different building blocks to form different three-dimensional structures. We performed iodine adsorption experiments on the three complexes and found that there was a significant relationship between the structural configuration and adsorption behaviour. The results showed that the complex 1 with the Cl atom on the triazine skeleton could have a boosting effect on adsorption with iodine. It displayed a remarkable adsorption effect for iodine (in the solution of water: 7.6 g g^-1 and in the solution of cyclohexane: 548.2 mg g^-1). In addition, it also displayed the adsorption effect for JGB dye (204.9 mg g^-1). For complex 2, it displayed an uptake effect for iodine in the solution of cyclohexane (529 mg g^-1). The possible adsorption mechanism was also investigated. By comparison, we found that chlorine atoms could play an important role in the adsorption processes. The adsorption capacity of complex 1 (containing the chlorine atom in the structure) was much higher than that for complex 3.

Research progress of metal organic frameworks and their derivatives for adsorption of anions in water: A review

Anion pollution in water has become a problem that cannot be ignored. The anion concentration should be controlled below the national emission standard to meet the demand for clean water. Among the methods for removing excess anions in water, the adsorption method has a unique removal performance, and the core of the adsorption method is the adsorbent. In recent years, the emerging metal-organic frameworks (MOFs) have the advantages of adjustable porosity, high specific surface area, diverse functions, and easy modification. They are very competitive in the field of adsorption of liquid anions. This article focuses on the adsorption of fluoride, arsenate, chromate, radioactive anions (ReO₄^-, TcO₄^-, SeO₄^2-/SeO₃^2-), phosphate ion, chloride ion, and other anions by MOFs and their derivatives. The preparation methods of MOFs are introduced in turn, the application of different types of metal-based MOFs to adsorb various anions were discussed in categories with their crystal structure and functional groups. The influence on the adsorption of anions is analyzed, including the more common and special adsorption mechanisms, adsorption kinetics and thermodynamics, and regeneration performance are briefly described. Finally, the current situation of MOFs adsorption of anions is summarized, and the outlook for future development is summarized to provide my own opinions for the practical application of MOFs.

Separation and remediation of environmental pollutants using metal-organic framework-based tailored materials

Metal-organic frameworks (MOFs) are a polymer hybrid family of compounds comprising metal ions that have been deliberately incorporated in organic ligands to form several multi-dimensional structures with unique structural and functional attributes. They have the typical properties of brittleness, major porosity, and randomly crystalline. These three factors hampered their potential incorporation into modern technologies. However, with the discovery of their polymers, hope was rekindled. Polymers, unlike their counterparts, are versatile and malleable and can be tailored into solids with a wide range of technical applications. MOFs can be effectively incorporated into polymer structures, resulting in polymers with enhanced properties and increased demand, according to recent studies. This review focuses on the synthetic procedures of MOFs used to create hybrid materials, as well as their potential environmentally related applications. Desalination, hazardous heavy metal removal and mitigation, gas and liquid separations and purifications, and dye removal will all be extensively discussed as applications. To assemble this review, we will add insight from recent papers and discoveries, as well as seminal reports from experts on the advancement of MOF-polymers.

A Ni(ii) metal–organic framework with helical channels for the capture of iodine via guest exchange induced amorphization

A Ni(ii) MOF based on a imidazole–tetrazole heterotopic tripodal ligand was constructed. It exhibits abilities for the stable capture of iodine molecules present in cyclohexane, water, and vapor, via amorphization induced by guest exchange.

Adsorptive removal of dyes from wastewater using a metal-organic framework: A review

Water pollution from synthetic dyes is a growing environmental concern because many dyes have carcinogenic effects on humans and aquatic life. Adsorption is a widely used technology for the separation and removal of dyes from wastewater. However, the dye removal process using conventional adsorbents is not sufficiently efficient for industrial wastewater. Metal-organic frameworks (MOFs) addresses these drawbacks. MOF showed excellent dye removal and degradation capacity owing to its multifunctionality, water-stability, large surface area, tunable pore size and recyclability. Magnetic MOFs retained excellent performance up to several consecutive cycles. Modified MOFs performed as Fenton-like catalysis process which generated abundant reactive radicals that degraded complex organic dyes into simple and less toxic forms which were further adsorbed onto the MOF. This review systematically compiles in-depth studies on the adsorptive removal of dyes from wastewater, MOF adsorption mechanisms, major influencing factors, to adsorption efficiency of MOFs. While all MOFs adsorb dyes through electrostatic attraction, the type of MOF, presence of functional groups, ligands, and pH significantly control the adsorption mechanism. Before developing an MOF, optimization and upgradation of factors and interaction between available adsorption site and adsorbate is needed. Finally, the prospects and new frontiers of MOFs in sustainable water treatment is discussed.

A review on water treatment technologies for the management of oxoanions: prospects and challenges

Oxoanions are a class of contaminants that are easily released into the aquatic systems either through natural or anthropogenic activities. Depending on their oxidation states, they are highly mobile, resulting in the contamination of underground water. Above the permissible level in groundwater, they pose as threats to mammals when the contaminated water is consumed. Some of the health challenges caused are cancer, neurological, cardiac, gastrointestinal, and skin disorders. Several treatment technologies have been adopted over the years for the management of these oxoanions present in the aquatic systems. However interesting these treatment technologies might be, they also have their limitations such as cost-effectiveness, the complexity of the process, and generation of secondary pollutants. This work focused on some of the water treatment technologies applied for the removal of oxoanions. Some of the advantages and disadvantages of these treatment technologies are also highlighted. Amongst all the treatment technologies, adsorption is the most applied method for the removal of oxoanions. However, photocatalysis has a higher prospect since it is non-selective and secondary pollutants are not generated after the treatment process. Also, photocatalysis can simultaneously reduce and oxidise oxoanions as well as organic pollutants respectively.

Capture of Toxic Oxoanions from Water Using Metal-Organic Frameworks

The effective capture of common water contaminants using metal-organic frameworks (MOFs) presents a remedy for current environmental concerns arising from the pollution of water sources. The crystalline porous nature of MOFs, their high internal surface area, and exceptional tunability make them suitable candidates for sequestration and removal of pollutants. However, the efficiency of capture depends largely on the nature of the interactions between the anions and the MOF. In this work, to elucidate the host-guest interactions involved in the capture of such pollutants, we explore three characteristically different MOFs: ZIF-8, iMOF-2c, and MOF-74. We demonstrate by ab initio electronic structure calculations the importance of exploiting qualitatively different binding modes for strong host-guest interactions available in the selected MOFs. Our simulations reveal the relative performance of neutral and cationic adsorbents while underscoring the importance of employing MOFs containing open metal sites for the efficient uptake of anions.

Evaluation of an Ionic Porous Organic Polymer for Water Remediation

The targeted synthesis of a novel ionic porous organic polymer (iPOP) was reported. The compound (denoted as QUST-iPOP-1) was built up through a quaternization reaction of tris(4-imidazolylphenyl)amine and cyanuric chloride, and then benzyl bromide was added to complete the quaternization of the total imidazolyl units. It featured a special exchangeable Cl^-/Br^--rich structure with high permanent porosity and wide pore size distribution, enabling it to rapidly and effectively remove environmentally toxic oxo-anions including Cr₂O₇^2-, MnO₄^-, and ReO₄^- and anionic organic dyes with different sizes including methyl blue, Congo red, and methyl orange from water. Notably, QUST-iPOP-1 showed ultra-high capacity values for radioactive TcO₄^- surrogate anions (MnO₄^- and ReO₄^-), Cr₂O₇^2-, methyl blue, and Congo red, and these were comparable to some reported compounds of exhaustive research. Furthermore, the relative removal rate was high even when other concurrent anions existed.

Zn(II)/Cd(II)-Based Metal-Organic Frameworks as Bifunctional Materials for Dye Scavenging and Catalysis of Fructose/Glucose to 5-Hydroxymethylfurfural

Functional neutral metal-organic frameworks (MOFs) {[M(5OH-IP)(L)]}_n [M = Zn(II) for ADES-4; Cd(II) for ADES-5; 5OH-IP = 5-hydroxyisophthalate; L = (E)-N'-(pyridin-3-ylmethylene)nicotinohydrazide) have been synthesized by a diffusion/conventional reflux/mechanochemical method and characterized by various analytical techniques. Crystals were harvested by a diffusion method, and single-crystal X-ray diffraction (SXRD) analysis revealed that an adjacent [M₂(COO)₂]_n ladder chain generates isostructural two-dimensional network motifs by doubly pillaring via L. The bulk-phase purity of ADES-4 and ADES-5 synthesized by a versatile synthetic approach has been recognized by the decent match of powder X-ray diffraction patterns with the simulated one. Both ADES-4 and ADES-5 showed selective adsorption of cationic dyes methylene blue (MB), methyl violet (MV), and rhodamine B (RhB) over anionic dye methyl orange (MO) from water with good uptake and rapid adsorption. Utilization of ADES-4 as a chromatographic column filler for adsorptive removal of individual cationic dyes as well as a mixture of dyes has been demonstrated from the aqueous phase. Interestingly, ADES-4 is reusable with good stability, and it showed a dye desorption phenomenon in methanol. The probable mechanism of cationic dye removal based on insight from structural information and plausible supramolecular interactions has also been explored. Both MOFs also showed efficient catalytic transformation of fructose and glucose into the high-value chemical intermediate 5-hydroxymethylfurfural of industrial significance.

Fluorine-Containing Triazole-Decorated Silver(I)-Based Cationic Metal-Organic Framework for Separating Organic Dyes and Removing Oxoanions from Water

Four new triazole-decorated silver(I)-based cationic metal-organic frameworks (MOFs), {[Ag(L1)](BF₄)}_n (1), {[Ag(L1)](NO₃)}_n (2), {[Ag(L2)](BF₄)}_n (3), and {[Ag(L2)](NO₃)}_n (4), have been synthesized using two newly designed ligands, 3-fluoro-5-(4H-1,2,4-triazol-4-yl)pyridine (L1) and 3-(4H-1,2,4-triazol-4-yl)-5-(trifluoromethyl)pyridine (L2). When the fluorine atom was changed to a trifluoromethyl group at the same position, tremendous enhancement in the MOF dimensionality was achieved [two-dimensional to three-dimensional (3D)]. However, changing the metal salt (used for the synthesis) had no effect. The higher electron-withdrawing tendency of the trifluoromethyl group in L2 aided in the formation of higher-dimensional MOFs with different properties compared with those of the fluoro derivatives. The fluoride group was introduced in the ligand to make highly electron-deficient pores inside the MOFs that can accelerate the anion-exchange process. The concept was proved by density functional theory calculation of the MOFs. Both 3D cationic MOFs were used for dye adsorption, and a remarkable amount of dye was adsorbed in the MOFs. In addition, owing to their cationic nature, the MOFs selectively removed anionic dyes from a mixture of anionic, cationic, and neutral dyes in the aqueous phase. Interestingly, the present MOFs were also highly effective for the removal of oxoanions (MnO₄^- and Cr₂O₇^2-) from water.

Recent Developments of Carboxymethyl Cellulose

Carboxymethyl cellulose (CMC) is one of the most promising cellulose derivatives. Due to its characteristic surface properties, mechanical strength, tunable hydrophilicity, viscous properties, availability and abundance of raw materials, low-cost synthesis process, and likewise many contrasting aspects, it is now widely used in various advanced application fields, for example, food, paper, textile, and pharmaceutical industries, biomedical engineering, wastewater treatment, energy production, and storage energy production, and storage and so on. Many research articles have been reported on CMC, depending on their sources and application fields. Thus, a comprehensive and well-organized review is in great demand that can provide an up-to-date and in-depth review on CMC. Herein, this review aims to provide compact information of the synthesis to the advanced applications of this material in various fields. Finally, this article covers the insights of future CMC research that could guide researchers working in this prominent field.

A copper(ii)-based porous metal-organic framework for the efficient and rapid capture of toxic oxo-anion pollutants from water

The efficient and selective capture of toxic oxo-anions is highly desirable for environmental retrieval and hazardous waste disposal. This has remained an important task and gained considerable scientific attention due to their harmful effects on the ecosystem and human health. Herein, a porous cationic metal-organic framework (MOF), namely, [Cu₃Cl(L)(H₂O)₂]·Cl·4DMA·8H₂O (1), was synthesized (H₄L = 1,4,8,11-tetrazacyclotetradecane-N,N',N'',N'''-tetramethylenecinnamic acid and DMA = N,N'-dimethylacetamide). 1 shows high stability in aqueous solution and represents an extraordinary example that is capable of efficiently capturing environmentally toxic Cr₂O₇^2- and MnO₄^- anions. Moreover, the removal of Cr₂O₇^2- and MnO₄^- anions from water was also explored in the presence of other competing anions.