X-ray Absorption Spectroscopy as a Probe of Ligand Noninnocence in Metallocorroles: The Case of Copper Corroles

Inverse Photoemission Spectroscopy of Coinage Metal Corroles: Comparison with Solution-Phase Electrochemistry

A combined direct and inverse photoemission study of coinage metal corroles suggests that the latter technique, in favorable cases, can provide some additional information relative to electrochemical measurements. Thus, whereas inverse photoemission spectroscopy (IPES) provides relative electron affinities for electron addition to different unoccupied orbitals, electrochemical reduction potentials shed light on the energetics of successive electron additions. While all three coinage metal triphenylcorrole (TPC) complexes exhibit similar ionization potentials, they exhibit dramatically different inverse photoemission spectra. For Cu[TPC], the lowest-energy IPES feature (0.74 eV) is found to be exceedingly close to the Fermi level; it is significantly higher for Ag[TPC] (1.65 eV) and much higher for Au[TPC] (2.40 eV). These differences qualitatively mirror those observed for electrochemical reduction potentials and are related to a partially metal-centered LUMO in the case of Cu- and Ag[TPC] and a fully corrole-based LUMO in the case of Au[TPC]; the latter orbital corresponds to the LUMO+1 in the case of Ag[TPC].

Spectroscopic characterization and reactivity studies of a copper(II) iminoxyl radical complex

A CuII complex (1) of a bis-pyridine-dioxime ligand and its one-electron oxidized analog (1-ox) were thoroughly characterized by various spectroscopic techniques, including X-ray absorption spectroscopy. 1-ox was found to be a CuII complex of a ligand iminoxyl radical and represents the first example of such a type. Reorganization energy (λ) of 2.12 eV was determined for the 1-ox/1 couple, which is considerably higher than the type 1 protein and synthetic CuIII/II(OH) complexes.

Inverse Hypercorroles

Ground-state and time-dependent density functional theory (TDDFT) calculations with the long-range-corrected, Coulomb-attenuating CAMY-B3LYP exchange-correlation functional and large, all-electron STO-TZ2P basis sets have been used to examine the potential "inverse hypercorrole" character of meso-p-nitrophenyl-appended dicyanidocobalt(III) corrole dianions. The effect is most dramatic for 5,15-bis(p-nitrophenyl) derivatives, where it manifests itself in intense NIR absorptions. The 10-aryl groups in these complexes play a modulatory role, as evinced by experimental UV-visible spectroscopic and electrochemical data for a series of 5,15-bis(p-nitrophenyl) dicyanidocobalt(III) corroles. TDDFT (CAMY-B3LYP) calculations ascribe these features clearly to a transition from the corrole's a2u-like HOMO (retaining the D4h irrep used for metalloporphyrins) to a nitrophenyl-based LUMO. The outward nature of this transition contrasts with the usual phenyl-to-macrocycle direction of charge transfer transitions in many hyperporphyrins and hypercorroles; thus, the complexes studied are aptly described as inverse hypercorroles.

Understanding Copper(I)-Ethylene Bonding Using Cu K-Edge X-ray Absorption Spectroscopy

Copper plays many important roles in ethylene chemistry, thus generating significant interest in understanding the structures, bonding, and properties of copper(I)-ethylene complexes. In this work, the ethylene binding characteristics of a series of isolable Cu(I)-ethylene compounds supported by a systematic set of fluorinated and nonfluorinated bis- and tris(pyrazolyl)borate and the related bis(pyrazolyl)methane ligands have been investigated. Through a combination of X-ray absorption spectroscopy and quantum chemical calculations, we characterize their geometric and electronic structures and the role that fluorinated ligands play in lowering the electron density at Cu sites. Such ligands increase the ethylene-to-Cu σ-donor interaction and, correspondingly, decrease the Cu-to-ethylene π back-bonding. This latter interaction leads to a partial vacancy in the Cu 3d level, which manifests experimentally as a low-energy feature in the Cu K pre-edge, allowing for its direct observation and comparison within a series of Cu(I) compounds. The pre-edge feature is reproduced by TD-DFT calculations, and its energy position and total intensity are used to quantitatively probe Cu-ethylene bonding. The variations in the Cu electronic structure influence the stability and overall ethylene bonding strength of these compounds, ultimately showing how substituents on the supporting ligands have a notable effect on their physical and chemical properties.

Cation Incorporation into Copper Oxide Lattice at Highly Oxidizing Potentials

Electrolyte cations can have significant effects on the kinetics and selectivity of electrocatalytic reactions. We show an atypical mechanism through which electrolyte cations can impact electrocatalyst performance─direct incorporation of the cation into the oxide electrocatalyst lattice. We investigate the transformations of copper electrodes in alkaline electrochemistry through operando X-ray absorption spectroscopy in KOH and Ba(OH)2 electrolytes. In KOH electrolytes, both the near-edge structure and extended fine-structure agree with previous studies; however, the X-ray absorption spectra vary greatly in Ba(OH)2 electrolytes. Through a combination of electronic structure modeling, near-edge simulation, and postreaction characterization, we propose that Ba2+ cations are directly incorporated into the lattice and form an ordered BaCuO2 phase at potentials more oxidizing than 200 mV vs the normal hydrogen electrode (NHE). BaCuO2 formation is followed by further oxidation to a bulk Cu3+-like BaxCuyOz phase at 900 mV vs NHE. Additionally, during reduction in Ba(OH)2 electrolyte, we find both Cu-O bonds and Cu-Ba scattering persist at potentials as low as -400 mV vs NHE. To our knowledge, this is the first evidence for direct oxidative incorporation of an electrolyte cation into the bulk lattice to form a mixed oxide electrode. The oxidative incorporation of electrolyte cations to form mixed oxides could open a new route for the in situ formation of active and selective oxidation electrocatalysts.

Diversifying the functions of heme proteins with non-porphyrin cofactors

Heme proteins perform diverse biochemical functions using a single iron porphyrin cofactor. This versatility makes them attractive platforms for the development of new functional proteins. While directed evolution and metal substitution have expanded the properties, reactivity, and applications of heme proteins, the incorporation of porphyrin analogs remains an underexplored approach. This review discusses the replacement of heme with non-porphyrin cofactors, such as porphycene, corrole, tetradehydrocorrin, phthalocyanine, and salophen, and the attendant properties of these conjugates. While structurally similar, each ligand exhibits distinct optical and redox properties, as well as unique chemical reactivity. These hybrids serve as model systems to elucidate the effects of the protein environment on the electronic structure, redox potentials, optical properties, or other features of the porphyrin analog. Protein encapsulation can confer distinct chemical reactivity or selectivity of artificial metalloenzymes that cannot be achieved with the small molecule catalyst alone. Additionally, these conjugates can interfere with heme acquisition and uptake in pathogenic bacteria, providing an inroad to innovative antibiotic strategies. Together, these examples illustrate the diverse functionality that can be achieved by cofactor substitution. The further expansion of this approach will access unexplored chemical space, enabling the development of superior catalysts and the creation of heme proteins with emergent properties.

Molecular Geometry and Electronic Structure of Copper Corroles

Copper corroles are known for their unique multiconfigurational electronic structures in the ground state, which arise from the transfer of electrons from the π orbitals of the corrole to the d-orbital of copper. While density functional theory (DFT) provides reasonably good molecular geometries, the determination of the ground spin state and the associated energetics is heavily influenced by functional choice, particularly the percentage of the Hartree-Fock exchange. Using extended multireference perturbation theory methods (XMS-CASPT2), the functional choice can be assessed. The molecular geometries and electronic structures of both the unsubstituted and the meso-triphenyl copper corroles were investigated. A minimal active space was employed for structural characterization, while larger active spaces are required to examine the electronic structure. The XMS-CASPT2 investigations conclusively identify the ground electronic state as a multiconfigurational singlet (S0) with three dominant electronic configurations in its lowest energy and characteristic saddled structure. In contrast, the planar geometry corresponds to the triplet state (T0), which is approximately 5 kcal/mol higher in energy compared to the S0 state for both the bare and substituted copper corroles. Notably, the planarity of the T0 geometry is reduced in the substituted corrole compared with that in the unsubstituted one. By analyzing the potential energy surface (PES) between the S0 and T0 geometries using XMS-CASPT2, the multiconfigurational electronic structure is shown to transition toward a single electron configuration as the saddling angle decreases (i.e., as one approaches the planar geometry). Despite the ability of the functionals to reproduce the minimum energy structures, only the TPSSh-D3 PES is reasonably close to the XMS-CASPT2 surface. Significant deviations along the PES are observed with other functionals.

Synthesis and characterization of visible-light-driven novel CuTa2O6 as a promising practical photocatalyst

In this work, the novel CuTa₂O₆ phase was successfully synthesized by the hydrothermal and followed by the calcination process. The X-ray diffraction pattern confirms the formation of different phases. At a low temperature, CuTa₂O₆ exhibits the orthorhombic phase, whereas, at a higher temperature, it underwent a phase transition to a cubic crystal structure. X-ray photoelectron spectroscopic results suggest the presence of all the elements (Cu, Ta, and O). The optical studies were carried out using a UV-Vis DRS spectrophotometer. FESEM images confirm the spherical-shaped particles for the sample annealed at a high temperature. The local atomic and electronic structures around Cu and the contribution of the Cu oxidation state in the CuTa₂O₆ system were determined by X-ray absorption spectroscopy. To investigate the effective usage of CuTa₂O₆ in treating wastewater, its photocatalytic activity was investigated by evaluating its use in the photodegradation of MO dye under visible light irradiation. Moreover, the prepared CuTa₂O₆ photocatalyst exhibits significant photocatalytic activity in the degradation of MO dye and shows excellent stability; it is therefore a promising material for potential use in a practical photocatalyst. The CuTa₂O₆ photocatalyst suggests an alternative avenue of research into effective photo-catalysts for solar hydrogen water splitting.

Synthesis, Spectral, Redox, and Sensing Studies of β-Dicyanovinyl-Appended Corroles and Their Metal Complexes

A new family of β-dicyanovinyl (DCV)-appended corroles represented as MTPC(MN) (where M = 3H, Cu, Ag, and Co(PPh₃) and MN = malononitrile and TPC = 5,10,15-triphenylcorrole) were synthesized starting from the free base mono β-formyl corrole, H₃TPC(CHO), and characterized along with their respective MTPC(CHO) and MTPC complexes as to their spectroscopic and electrochemical properties in nonaqueous media. Comparisons between the two series of corroles demonstrate a pronounced substituent effect of the β-DCV group on the physicochemical properties making the MTPC(MN) derivatives substantially easier to reduce and more difficult to oxidize than the formyl or unsubstituted corroles. In addition, the colorimetric and spectral detection of 11 different anions (X) in the form of tetrabutylammonium salts (TBAX, X = PF₆^-, OAc^-, H₂PO₄^-, CN^-, HSO₄^-, NO₃^-, ClO₄^-, F^-, Cl^-, Br^-, and I^-) were also investigated in nonaqueous media. Of the investigated anions, only CN^- was found to induce changes in the UV-vis and ¹H NMR spectra of the β-DCV metallocorroles. This data revealed that CuTPC(MN) and AgTPC(MN) act as chemodosimeters for selective cyanide ion detection via a nucleophilic attack at the vinylic carbon of the DCV substituent, while (PPh₃)CoTPC(MN) acts as a chemosensor for cyanide ion sensing via axial coordination to the cobalt metal center. A low-limit detection of cyanide ions was observed at 1.69 ppm for CuTPC(MN) and 1.17 ppm for AgTPC(MN) in toluene.

Ag(III)···Ag(III) Argentophilic Interaction in a Cofacial Corrole Dyad

Metallophilic interactions between closed-shell metal centers are exemplified by d¹⁰ ions, with Au(I) aurophilic interactions as the archetype. Such an interaction extends to d⁸ species, and examples involving Au(III) are prevalent. Conversely, Ag(III) argentophilic interactions are uncommon. Here, we identify argentophilic interactions in silver corroles, which are authentic Ag(III) species. The crystal structure of a monomeric silver corrole is a dimer in the solid state, and the macrocycle exhibits an atypical domed conformation. In order to evaluate whether this represents an authentic metallophilic interaction or a crystal-packing artifact, the analogous cofacial or "pacman" corrole was prepared. The conformation of the monomer was recapitulated in the silver pacman corrole, exhibiting a short 3.67 Å distance between metal centers and a significant compression of the xanthene backbone. Theoretical calculations support the presence of a rare Ag(III)···Ag(III) argentophilic interaction in the pacman complex.

Controlling Electronic Events Through Rational Structural Design in Subphthalocyanine-Corrole Dyads: Synthesis, Characterization, and Photophysical Properties

Porphyrinoids are considered perfect candidates for their incorporation into electron donor-acceptor (D-A) arrays due to their remarkable optoelectronic properties and low reorganization energies. For the first time, a series of subphthalocyanine (SubPc) and corrole (Cor) were covalently connected through a short-range linkage. SubPc axial substitution strategies were employed, which allowed the synthesis of the target molecules in decent yields. In this context, a qualitative synthetic approach was performed to reverse the expected direction of the different electronic events. Consequently, in-depth absorption, fluorescence, and electrochemical assays enabled the study of electronic and photophysical properties. Charge separation was observed in cases of electron-donating Cors, whereas a quantitative energy transfer from the Cor to the SubPc was detected in the case of electron accepting Cors.

Generation and Aerobic Oxidative Catalysis of a Cu(II) Superoxo Complex Supported by a Redox-Active Ligand

Cu systems feature prominently in aerobic oxidative catalysis in both biology and synthetic chemistry. Metal ligand cooperativity is a common theme in both areas as exemplified by galactose oxidase and by aminoxyl radicals in alcohol oxidations. This has motivated investigations into the aerobic chemistry of Cu and specifically the isolation and study of Cu-superoxo species that are invoked as key catalytic intermediates. While several examples of complexes that model biologically relevant Cu(II) superoxo intermediates have been reported, they are not typically competent aerobic catalysts. Here, we report a new Cu complex of the redox-active ligand ^tBu,TolDHP (2,5-bis((2-t-butylhydrazono)(p-tolyl)methyl)-pyrrole) that activates O₂ to generate a catalytically active Cu(II)-superoxo complex via ligand-based electron transfer. Characterization using ultraviolet (UV)-visible spectroscopy, Raman isotope labeling studies, and Cu extended X-ray absorption fine structure (EXAFS) analysis confirms the assignment of an end-on κ¹ superoxo complex. This Cu-O₂ complex engages in a range of aerobic catalytic oxidations with substrates including alcohols and aldehydes. These results demonstrate that bioinspired Cu systems can not only model important bioinorganic intermediates but can also mediate and provide mechanistic insight into aerobic oxidative transformations.

NIR-emissive, singlet-oxygen-sensitizing gold tetra(thiocyano)corroles

Presented herein are two fully characterized gold tetrathiocyanocorroles representing a potentially significant new class of NIR-emissive 5d-metallocorroles. The four SCN groups on the bipyrrole unit of the corrole exert a powerful electron-withdrawing effect, upshifting both the oxidation and reduction potentials by roughly half a volt relative to their unsubstituted counterparts. That said, the upshift of the LUMO is somewhat higher than that of the HOMO so these complexes also exhibit a smaller HOMO-LUMO gap, as evinced in both electrochemical measurements and Q band energies (∼595 nm relative to ∼571 nm for their SCN-free counterparts). The new compounds exhibit NIR phosphorescence under ambient conditions with emission maxima around 900 nm (compared with 790 nm for simple Au triarylcorroles), phosphorescence quantum yields around 0.3%, phosphorescence lifetimes around 10 μs, and singlet oxygen sensitization with a quantum yield of around 50 ± 5% in solution, together signifying wide-ranging potential applications as triplet photosensitizers in oxygen sensing and photodynamic therapy.

Corroles at work: a small macrocycle for great applications

Corrole chemistry has witnessed an impressive boost in studies in the last 20 years, thanks to the possibility of preparing corrole derivatives by simple synthetic procedures. The investigation of a large number of corroles has highlighted some peculiar characteristics of these macrocycles, having features different from those of the parent porphyrins. With this progress in the elucidation of corrole properties, attention has been focused on the potential for the exploitation of corrole derivatives in different important application fields. In some areas, the potential of corroles has been studied in certain detail, for example, the use of corrole metal complexes as electrocatalysts for energy conversion. In some other areas, the field is still in its infancy, such as in the exploitation of corroles in solar cells. Herein, we report an overview of the different applications of corroles, focusing on the studies reported in the last five years.

A DMRG/CASPT2 Investigation of Metallocorroles: Quantifying Ligand Noninnocence in Archetypal 3d and 4d Element Derivatives

Hybrid density functional theory (B3LYP) and density matrix renormalization group (DMRG) theory have been used to quantitatively compare the degree of ligand noninnocence (corrole radical character) in seven archetypal metallocorroles. The seven complexes, in decreasing order of corrole noninnocent character, are Mn[Cor]Cl > Fe[Cor]Cl > Fe[Cor](NO) > Mo[Cor]Cl2 > Ru[Cor](NO) ≈ Mn[Cor]Ph ≈ Fe[Cor]Ph ≈ 0, where [Cor] refers to the unsubstituted corrolato ligand. DMRG-based second-order perturbation theory calculations have also yielded detailed excited-state energetics data on the compounds, shedding light on periodic trends involving middle transition elements. Thus, whereas the ground state of Fe[Cor](NO) (S = 0) is best described as a locally S = 1/2 {FeNO}7 unit antiferromagnetically coupled to a corrole A' radical, the calculations confirm that Ru[Cor](NO) may be described as simply {RuNO}6-Cor3-, that is, having an innocent corrole macrocycle. Furthermore, whereas the ferromagnetically coupled S = 1{FeNO}7-Cor•2- state of Fe[Cor](NO) is only ∼17.5 kcal/mol higher than the S = 0 ground state, the analogous triplet state of Ru[Cor](NO) is higher by a far larger margin (37.4 kcal/mol) relative to the ground state. In the same vein, Mo[Cor]Cl2 exhibits an adiabatic doublet-quartet gap of 36.1 kcal/mol. The large energy gaps associated with metal-ligand spin coupling in Ru[Cor](NO) and Mo[Cor]Cl2 reflect the much greater covalent character of 4d-π interactions relative to analogous interactions involving 3d orbitals. As far as excited-state energetics is concerned, DMRG-CASPT2 calculations provide moderate validation for hybrid density functional theory (B3LYP) for qualitative purposes, but underscore the possibility of large errors (>10 kcal/mol) in interstate energy differences.

Comparing Isoelectronic, Quadruple-Bonded Metalloporphyrin and Metallocorrole Dimers: Scalar-Relativistic DFT Calculations Predict a >1 eV Range for Ionization Potential and Electron Affinity

A scalar-relativistic DFT study of isoelectronic, quadruple-bonded Group 6 metalloporphyrins (M = Mo, W) and Group 7 metallocorroles (M = Tc, Re) has uncovered dramatic differences in ionization potential (IP) and electron affinity (EA) among the compounds. Thus, both the IPs and EAs of the corrole derivatives are 1 eV or more higher than those of the porphyrin derivatives. These differences largely reflect the much lower orbital energies of the δ- and δ*-orbitals of the corrole dimers relative to those of the porphyrin dimers, which in turn reflect the higher (+III as opposed to +II) oxidation states of the metals in the former compounds. Significant differences have also been determined between Mo and W porphyrin dimers and between Tc and Re corrole dimers. These differences are thought to largely reflect greater relativistic destabilization of the 5d orbitals of W and Re relative to the 4d orbitals of Mo and Tc. The calculated differences in IP and EA should translate to major differences in electrochemical redox potentials-a prediction that in our opinion is well worth confirming.

Heavy-element-ligand covalence: ligand noninnocence in molybdenum and tungsten Viking-helmet Corroles

Extensive DFT calculations with several exchange-correlation functionals indicate that molybdenum-dichlorido Viking helmet corroles are noninnocent with significant Mo^IV-corrole˙^2- character. The effect is mediated by a Mo(4d)-corrole(π) orbital interaction similar to that postulated for MnCl, FeCl and FeNO corroles. The effect also appears to operate in tungsten-dichlorido corroles but is weaker relative to that for Mo. In contrast, MoO triarylcorroles do not exhibit a significant degree of corrole radical character. Furthermore, the Soret absorption maxima of a series of MoCl₂ tris(para-X-phenyl)corrole derivatives were found to redshift dramatically with increasing electron-donating character of the para substituent X, essentially clinching the case for a noninnocent macrocycle in MoCl₂ corroles.

X-ray absorption spectroscopy of exemplary platinum porphyrin and corrole derivatives: metal- versus ligand-centered oxidation

A combination of Pt L3-edge X-ray absorption spectroscopy (EXAFS and XANES) and DFT (TPSS) calculations have been performed on powder samples of the archetypal platinum porphyrinoid complexes PtII[TpCF3PP], PtIV[TpCF3PP]Cl2, and PtIV[TpCF3PC](Ar)(py), where TpCF3PP2- = meso-tetrakis(p-trifluoromethylphenyl)porphyrinato and TpCF3PC3- = meso-tris(p-trifluoromethylphenyl)corrolato. The three complexes yielded Pt L3-edge energies of 11 566.0 eV, 11 567.2 eV, and 11 567.6 eV, respectively. The 1.2 eV blueshift from the Pt(ii) to the Pt(iv) porphyrin derivative is smaller than expected for a formal two-electron oxidation of the metal center. A rationale was provided by DFT-based Hirshfeld which showed that the porphyrin ligand in the Pt(iv) complex is actually substantially oxidized relative to that in the Pt(ii) complex. The much smaller blueshift of 0.4 eV, going from PtIV[TpCF3PP]Cl2, and PtIV[TpCF3PC](Ar)(py), is ascribable to the significantly stronger ligand field in the latter compound.

The Story of 5d Metallocorroles: From Metal-Ligand Misfits to New Building Blocks for Cancer Phototherapeutics

Porphyrin chemistry is Shakespearean: over a century of study has not withered the field’s apparently infinite variety. Heme proteins continually astonish us with novel molecular mechanisms, while new porphyrin analogues bowl us over with unprecedented optical, electronic, and metal-binding properties. Within the latter domain, corroles occupy a special place, exhibiting a unique and rich coordination chemistry. The 5d metallocorroles are arguably the icing on that cake.

New Zealand chemist Penny Brothers has used the word “misfit” to describe the interactions of boron, a small atom with a predilection for tetrahedral coordination, and porphyrins, classic square-planar ligands. Steve Jobs lionized misfits as those who see things differently and push humanity forward. Both perspectives have inspired us. The 5d metallocorroles are misfits in that they encapsulate a large 5d transition metal ion within the tight cavity of a contracted porphyrin ligand.

Given the steric mismatch inherent in their structures, the syntheses of some 5d metallocorroles are understandably capricious, proceeding under highly specific conditions and affording poor yields. Three broad approaches may be distinguished.

(a) In the metal–alkyl approach, a free-base corrole is exposed to an alkyllithium and the resulting lithio-corrole is treated with an early transition metal chloride; a variant of the method eschews alkyllithium and deploys a transition metal–alkyl instead, resulting in elimination of the alkyl group as an alkane and insertion of the metal into the corrole. This approach is useful for inserting transition metals from groups 4, 5, and, to some extent, 6, as well as lanthanides and actinides.

(b) In our laboratory, we have often deployed a low-valent organometallic approach for the middle transition elements (groups 6, 7, 8, and 9). The reagents are low-valent metal–carbonyl or −olefin complexes, which lose one or more carbon ligands at high temperature, affording coordinatively unsaturated, sticky metal fragments that are trapped by the corrole nitrogens.

(c) Finally, a metal acetate approach provides the method of choice for gold and platinum insertion (groups 10 and 11).

This Account provides a first-hand perspective of the three approaches, focusing on the last two, which were largely developed in our laboratory. In general, the products were characterized with X-ray crystallography, electrochemistry, and a variety of spectroscopic methods. The physicochemical data, supplemented by relativistic DFT calculations, have provided fascinating insights into periodic trends and relativistic effects.

An unexpected feature of many 5d metallocorroles, given their misfit character, is their remarkable stability under thermal, chemical, and photochemical stimulation. Many of them also exhibit long triplet lifetimes on the order of 100 μs and effectively sensitize singlet oxygen formation. Many exhibit phosphorescence in the near-infrared under ambient conditions. Furthermore, water-soluble ReO and Au corroles exhibit impressive photocytotoxicity against multiple cancer cell lines, promising potential applications as cancer phototherapeutics. We thus envision a bright future for the compounds as rugged building blocks for new generations of therapeutic and diagnostic (theranostic) agents.

β-Disubstituted silver(III) corroles: Facile synthesis, photophysical and electrochemical redox properties

Facile synthesis of 3,17-disubstituted Ag(III) tritolylcorroles (2-5), R2[TTC]Ag where R = methyl (2), phenyl (3), methyl acrylate (MA) (4) and phenylethynyl (PE) (5) using Pd-catalyzed reactions in good to excellent yields are reported. All synthesized corroles were characterized by various spectroscopic techniques and mass spectrometry. MA2[TTC]Ag (4) and PE2[TTC]Ag (5) exhibited highly red-shifted electronic spectral bands with considerable broadening due to extended [Formula: see text]-conjugation and electron withdrawing effect of [Formula: see text]-substituents. Geometry optimization of these corroles was performed using density functional theory (DFT). Among all, MA2[TTC]Ag (4) exhibited very high dipole moment (10.31 D) which could be the potential candidate for nonlinear optical (NLO) applications. The redox tunability was achieved by substituting electron donating and withdrawing substituents at the [Formula: see text]-positions. Particularly, corroles 4 and 5 exhibited lower HOMO–LUMO gap due to extended [Formula: see text]-conjugation and electron withdrawing [Formula: see text]-substituents.

2D Copper Tetrahydroxyquinone Conductive Metal-Organic Framework for Selective CO2 Electrocatalysis at Low Overpotentials

Metal-organic frameworks (MOFs) are promising materials for electrocatalysis; however, lack of electrical conductivity in the majority of existing MOFs limits their effective utilization in the field. Herein, an excellent catalytic activity of a 2D copper (Cu)-based conductive MOF, copper tetrahydroxyquinone (CuTHQ), is reported for aqueous CO₂ reduction reaction (CO₂ RR) at low overpotentials. It is revealed that CuTHQ nanoflakes (NFs) with an average lateral size of 140 nm exhibit a negligible overpotential of 16 mV for the activation of this reaction, a high current density of ≈173 mA cm^-2 at -0.45 V versus RHE, an average Faradaic efficiency (F.E.) of ≈91% toward CO production, and a remarkable turnover frequency as high as ≈20.82 s^-1 . In the low overpotential range, the obtained CO formation current density is more than 35 and 25 times higher compared to state-of-the-art MOF and MOF-derived catalysts, respectively. The operando Cu K-edge X-ray absorption near edge spectroscopy and density functional theory calculations reveal the existence of reduced Cu (Cu⁺ ) during CO₂ RR which reversibly returns to Cu²⁺ after the reaction. The outstanding CO₂ catalytic functionality of conductive MOFs (c-MOFs) can open a way toward high-energy-density electrochemical systems.

Towards self-doping multimetal porphyrin systems

An approach for the possible production of novel bimetallic self-doped porphyrin-based compounds of potential interest in material science is reported. Heating Cu(II)tetraphenylporphyrin (TPPCu) with chromocene at 120°C in benzonitrile affords the crystalline multimetal porphyrin system TPPCu/TPPCr in good yield. The X-ray single crystal structural analysis reveals a random distribution of TPPCu and TPPCr, with a Cu:Cr ratio of 71(2):29(2)%. Exploratory DFT calculations of TPPCu/TPPCr indicate little if any electron transfer. In contrast, calculations of a hypothetical cationic TPPCu/TPPRu system indicates the possibility of self-doping.

Synthesis and molecular structure of perhalogenated rhenium-oxo corroles

As part of our efforts to develop rhenium-oxo corroles as photosensitizers for oxygen sensing and photodynamic therapy, we investigated the potential β-perhalogenation of five ReO meso-tris(para-X-phenyl)corroles, Re[TpXPC](O) (X = CF3, H, F, CH3, and OCH3), with elemental chlorine and bromine. With Cl2, β-octachlorinated products Re[Cl8TpXPC](O) were rapidly obtained for X = CF3, H, and CH3, but X = OCH3 resulted in overchlorination on the meso-aryl groups. Full β-octabromination proved slower relative to Cu and Ir corroles, but the desired Re[Br8TpXPC](O) products were finally obtained for X = H and F after a week at room temperature. For X = CH3 and OCH3, these conditions led to undecabrominated products Re[Br11TpXPC](O). Compared to the β-unsubstituted starting materials, the β-octahalogenated products were found to exhibit sharp 1H NMR signals at room temperature, indicating that the aryl groups are locked in place by the β-halogens, and substantially redshifted Soret and Q bands. Single-crystal X-ray structures of Re[Cl8TpCF3PC](O), Re[Cl8TpCH3PC](O), and Re[Br8TpFPC](O) revealed mild saddling for one Cl8 structure and the Br8 structure. These structural variations, however, appear too insignificant to explain the slowness of the β-octabromination protocols, which seems best attributed to the deactivating influence of the high-valent Re center.

Molecular Structure of Copper and μ-Oxodiiron Octafluorocorrole Derivatives: Insights into Ligand Noninnocence

Single-crystal X-ray structures were obtained for the copper and μ-oxodiiron complexes of 2,3,7,8,12,13,17,18-octafluoro-5,10,15-triphenylcorrole, hereafter denoted as Cu[F₈TPC] and {Fe[F₈TPC]}₂O. A comparison with the crystal structures of other undecasubstituted Cu corroles, including those with H, Ar, Br, I, and CF₃ as β-substituents, showed that the degree of saddling increases in the order: H ≲ F < Ar ≲ Br ≲ I < CF₃. In other words, Cu[F₈TPC] is marginally more saddled than β-unsubstituted Cu triarylcorroles, but substantially less saddled than Cu undecaarylcorroles, β-octabromo-meso-triarylcorroles, and β-octaiodo-meso-triarylcorroles, and far less saddled than Cu β-octakis(trifluoromethyl)-meso-triarylcorroles. As for {Fe[F₈TPC]}₂O, the moderate quality of the structure did not allow us to draw firm conclusions in regard to bond length alternations in the corrole skeleton and hence also the question of ligand noninnocence. The Fe-O bond distances, 1.712(8) and 1.724(8), however, are essentially identical to those observed for {Fe[TPFPC]}₂O, where TPFPC^3- is the trianion of 5,10,15-tris(pentafluorophenyl)corrole, suggesting that a partially noninnocent electronic structural description may be applicable for both compounds.

Protonation-Induced Hyperporphyrin Spectra of meso-Aminophenylcorroles

UV-vis spectrophotometric titrations have been carried out on meso-tris(o/m/p-aminophenyl)corrole (H₃[o/m/p-TAPC]) and meso-triphenylcorrole (H₃[TPC]) in dimethyl sulfoxide with methanesulfonic acid (MSA). Monoprotonation was found to result in hyperporphyrin spectra characterized by new, red-shifted, and intense Q bands. The effect was particularly dramatic for H₃[p-TAPC] for which the Q band red-shifted from ∼637 nm for the neutral species to 764 nm in the near-IR for H₄[p-TAPC]⁺. Upon further protonation, the Q band was found to blue-shift back to 687 nm. A simple explanation of the phenomena has been offered in terms of quinonoid resonance forms.

Gold dipyrrin-bisphenolates: a combined experimental and DFT study of metal–ligand interactions

Given that noninnocent and metalloradical-type electronic structures are ubiquitous among dipyrrin-bisphenolate (DPP) complexes, we synthesized the gold(iii) derivatives as potentially innocent paradigms against which the properties of other metallo-DPP derivatives can be evaluated. Electronic absorption spectra, electrochemical studies, a single-crystal X-ray structure, and DFT calculations all suggest that the ground states of the new complexes indeed correspond to an innocent Au^III–DPP³⁻, paralleling a similar description noted for Au corroles. Interestingly, while DFT calculations indicate purely ligand-centered oxidations, reduction of AuDPP is predicted to occur across both the metal and the ligand.

The first gold dipyrrin-bisphenolates have been synthesized. Like their corrole analogues, they exhibit Au^III–L³⁻ ground states, providing rare innocent paradigms for a class of complexes that commonly occur as metalloradicals.

X-ray absorption spectroscopy of archetypal chromium porphyrin and corrole derivatives

A Cr K-edge XAS study of paradigmatic chromium porphyrin and corrole derivatives has been carried out, providing key data for the Cr(iv) and Cr(v) oxidation states.

Formation of a Copper(II)-Tyrosyl Complex at the Active Site of Lytic Polysaccharide Monooxygenases Following Oxidation by H2O2

Hydrogen peroxide is a cosubstrate for the oxidative cleavage of saccharidic substrates by copper-containing lytic polysaccharide monooxygenases (LPMOs). The rate of reaction of LPMOs with hydrogen peroxide is high, but it is accompanied by rapid inactivation of the enzymes, presumably through protein oxidation. Herein, we use UV-vis, CD, XAS, EPR, VT/VH-MCD, and resonance Raman spectroscopies, augmented with mass spectrometry and DFT calculations, to show that the product of reaction of an AA9 LPMO with H2O2 at higher pHs is a singlet Cu(II)-tyrosyl radical species, which is inactive for the oxidation of saccharidic substrates. The Cu(II)-tyrosyl radical center entails the formation of significant Cu(II)-(●OTyr) overlap, which in turn requires that the plane of the d(x2-y2) SOMO of the Cu(II) is orientated toward the tyrosyl radical. We propose from the Marcus cross-relation that the active site tyrosine is part of a "hole-hopping" charge-transfer mechanism formed of a pathway of conserved tyrosine and tryptophan residues, which can protect the protein active site from inactivation during uncoupled turnover.

The Myth of d8 Copper(III)

Seventeen Cu complexes with formal oxidation states ranging from CuI to CuIII are investigated through the use of multiedge X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations. Analysis reveals that the metal-ligand bonding in high-valent, formally CuIII species is extremely covalent, resulting in Cu K-edge and L2,3-edge spectra whose features have energies that complicate physical oxidation state assignment. Covalency analysis of the Cu L2,3-edge data reveals that all formally CuIII species have significantly diminished Cu d-character in their lowest unoccupied molecular orbitals (LUMOs). DFT calculations provide further validation of the orbital composition analysis, and excellent agreement is found between the calculated and experimental results. The finding that Cu has limited capacity to be oxidized necessitates localization of electron hole character on the supporting ligands; consequently, the physical d8 description for these formally CuIII species is inaccurate. This study provides an alternative explanation for the competence of formally CuIII species in transformations that are traditionally described as metal-centered, 2-electron CuI/CuIII redox processes.

Seven Clues to Ligand Noninnocence: The Metallocorrole Paradigm

Noninnocent ligands do not allow an unambiguous definition of the oxidation state of a coordinated atom. When coordinated, the ligands also cannot be adequately represented by a classic Lewis structure. A noninnocent system thus harbors oxidizing (holes) or reducing equivalents (electrons) that are delocalized over both the ligand and the coordinated atom. To a certain degree, that is true of all complexes, but the phenomenon is arguably most conspicuous in complexes involving ligands with extended π-systems. The electronic structures of such systems have often been mischaracterized, thereby muddying the chemical literature to the detriment of students and newcomers to the field. In recent years, we have investigated the electronic structures of several metallocorrole families, several of which have turned out to be noninnocent. Our goal here, however, is not to present a systematic account of the different classes of metallocorroles, but rather to focus on seven major tools (in a nod to A. G. Cairns-Smith's Seven Clues to the Origin of Life) that led us to recognize noninnocent behavior and subsequently to characterize the phenomenon in depth. (1) The optical probe: For a series of noninnocent meso-triarylcorrole derivatives with different para substituents X, the Soret maxima are typically exquisitely sensitive to the nature of X, red-shifting with increasing electron-donating character of the group. No such substituent sensitivity is observed for the Soret maxima of innocent triarylcorrole derivatives. (2) Quantum chemistry: Spin-unrestricted density functional theory calculations permit a simple and quick visualization of ligand noninnocence in terms of the spin density profile. Even for an S = 0 complex, the broken-symmetry method often affords a spin density profile that, its fictitious character notwithstanding, helps visualize the intramolecular spin couplings. (3) NMR and EPR spectroscopy: In principle, these two techniques afford experimental probes of the electronic spin density. (4) Structure/X-ray crystallography. Ligand noninnocence in metallocorroles is often reflected in small but distinct skeletal bond length alternations in and around the bipyrrole part of the macrocycle. In addition, for Cu and some Ag corroles, ligand noninnocence manifests itself via a strong saddling of the macrocycle. (5) Vibrational spectroscopy. Unsurprisingly, the aforementioned bond length alternations translate to structure-sensitive vibrational marker bands. (6) Electrochemistry. Noninnocent metallocorroles exhibit characteristically high reduction potentials, but caution should be exercised in turning the logic around. A high reduction potential does not necessarily signify a noninnocent metallocorrole; certain high-valent metal centers also undergo metal-centered reduction at quite high potentials. (7) X-ray absorption spectroscopy (XAS). By focusing on a given element, typically the central atom in a coordination complex, X-ray absorption near-edge spectroscopy (XANES) can provide uniquely detailed local information on oxidation and spin states, ligand field strength, and degree of centrosymmetry. For metallocorroles, some of the most clear-cut distinctions between innocent and noninnocent systems have come from the K-edge XANES of Mn and Fe corroles. For researchers faced with a new, potentially noninnocent system, the take-home message is to employ a good majority (i.e., at least four) of the above methods to arrive at a reliable conclusion vis-à-vis noninnocence.