A Robust TbIII-MOF for Ultrasensitive Detection of Trinitrophenol: Matched Channel Dimensions and Strong Host–Guest Interactions

A boronic acid functionalized terbium metal-organic framework for fluorescence detection and adsorption of gallic acid

Gallic acid (GA) is widely applied as an antioxidant in foods and pharmaceuticals. In this study, a boronic acid functionalized metal-organic framework (Tb-MOF) is developed for fluorescence detection and adsorption of GA. Tb-MOF is constructed by coordination polymerization of terbium ions (Tb3+) with 3,5-dicarboxyphenylboronic acid (BBDC). The resulted Tb-MOF exhibits green fluorescence emission at 546 nm under an excitation of 280 nm. However, the green emission of Tb-MOF decreases in the presence of GA due to the formation of borate esters between phenolic hydroxyl groups of GA and hydroxyl groups of Tb-MOF. Under optimized conditions (40 mmol·L-1 Tris-HCl buffer solution of pH = 6.2 and reaction time of 25 min), the sensor shows a wide detection range of 5 ∼ 200 μmol·L-1 with a correlation coefficient (R2) of 0.9950. Meanwhile, Tb-MOF shows good selectivity and sensitivity to GA (the limit of detection (LOD) is 0.44 μmol·L-1). Additionally, Tb-MOF is used to investigate GA adsorption. The corresponding adsorption data can be suitably described by Langmuir isotherm and pseudo-second-order models with a maximum adsorption capacity of 6.03 mg·g-1. The above results demonstrate the potential of prepared Tb-MOF in integrating GA detection and adsorption in water samples.

Recent Development on Sensing Strategies for Small Molecules Detections

Sensors play a critical role in the detection and monitoring of various substances present in our environment, providing us with valuable information about the world around us. Within the field of sensor development, one area that holds particular importance is the detection of small molecules. Small molecules encompass a wide range of organic or inorganic compounds with low molecular weight, typically below 900 Daltons including gases, volatile organic compounds, solvents, pesticides, drugs, biomarkers, toxins, and pollutants. The accurate and efficient detection of these small molecules has attracted significant interest from the scientific community due to its relevance in diverse fields such as environmental pollutants monitoring, medical diagnostics, industrial optimization, healthcare remedies, food safety, ecosystems, and aquatic and terrestrial life preservation. To meet the demand for precise and efficient monitoring of small molecules, this summary aims to provide an overview of recent advancements in sensing and quantification strategies for various organic small molecules including Hydrazine, Glucose, Morpholine, Ethanol amine, Nitrosamine, Oxygen, Nitro-aromatics, Phospholipids, Carbohydrates, Antibiotics, Pesticides, Drugs, Adenosine Triphosphate, Aromatic Amine, Glutathione, Hydrogen Peroxide, Acetone, Methyl Parathion, and Thiophenol. The focus is on understanding the receptor sensing mechanism, along with the electrical, optical, and electrochemical response. Additionally, the variations in UV-visible spectral properties of the ligands upon treatment with the receptor, fluorescence and absorption titration analysis for limit of detection (LOD) determination, and bioimaging analysis are discussed wherever applicable. It is anticipated that the information gathered from this literature survey will be helpful for the perusal of innovation regarding sensing strategies.

MOFs as versatile scaffolds to explore environmental contaminants based on their luminescence bustle

Metal-Organic Frameworks (MOFs) with luminescent properties hold significant promise for environmental remediation. This review critically examines recent research on these materials design, synthesis, and applications, mainly focusing on their role in combating environmental pollutants. Through a comprehensive analysis of metal ions, ligands, and framework compositions, the review discusses the importance of tailored design and synthesis approaches in achieving desired luminescent characteristics. Key findings highlight the effectiveness of luminous MOFs as fluorescent sensors for a wide range of contaminants, including heavy metals, reactive species, antibiotics, and explosives. Considering all this, the review discusses future research needs and opportunities in the field of luminous MOFs. It emphasizes the importance of developing multifunctional materials, refining design methodologies, exploring sensing mechanisms, and ensuring environmental compatibility, scalability, and affordability. By providing insights into the current state of research and outlining future directions, this review is a valuable resource for researchers seeking to address environmental challenges using MOF-based solutions.

Synthesis of a Cd-MOF Fluorescence Sensor and Its Detection of Fe3+, Fluazinam, TNP, and Sulfasalazine Enteric-Coated Tablets in Aqueous Solution

A Cd-based metal-organic framework (Cd-MOF), named after {[Cd(ttc)(H₂O)]·H₂O}_n (ttc = 1-imidazole-1-yl-2,4,6-benzene-tricarboxylic acid), was synthesized using the solvothermal reaction. The single-crystal structure was determined by single X-ray diffraction analysis, and crystalline characteristics and composition were confirmed by powder X-ray diffraction (PXRD) and thermogravimetric analysis (TG), respectively. Structural analysis showed that the Cd²⁺ ion is in the seven-coordinated mode, in which ttc^2- ion adopts the μ₄-η¹-η¹-η²-η² coordination mode. It is worth noting that the Cd²⁺ ion is connected to ttc^2- to form a 2D network, and the adjacent 2D network is expanded into a 3D supramolecular network structure through weak hydrogen bonds. The fluorescence sensing experiments indicated that Cd-MOF could not only be used as a fluorescence sensor for Fe³⁺, fluazinam (FLU), and 2,4,6-trinitrophenolol (TNP) but also for sulfasalazine detection in aqueous solution. To verify the sensitivity of the fluorescent probe, we calculated its detection limit: 5.34 × 10^-8 M (Fe³⁺), 7.8 × 10^-8 M (FLU), 1.21 × 10^-7 M (TNP), and 2.67 × 10^-7 M (SECT). In addition, the quenching mechanism was thoroughly studied.

Advance Progress on Luminescent Sensing of Nitroaromatics by Crystalline Lanthanide-Organic Complexes

Water environment pollution is becoming an increasingly serious issue due to industrial pollutants with the rapid development of modern industry. Among many pollutants, the toxic and explosive nitroaromatics are used extensively in the chemical industry, resulting in environmental pollution of soil and groundwater. Therefore, the detection of nitroaromatics is of great significance to environmental monitoring, citizen life and homeland security. Lanthanide-organic complexes with controllable structural features and excellent optical performance have been rationally designed and successfully prepared and used as lanthanide-based sensors for the detection of nitroaromatics. This review will focus on crystalline luminescent lanthanide-organic sensing materials with different dimensional structures, including the 0D discrete structure, 1D and 2D coordination polymers and the 3D framework. Large numbers of studies have shown that several nitroaromatics could be detected by crystalline lanthanide-organic-complex-based sensors, for instance, nitrobenzene (NB), nitrophenol (4-NP or 2-NP), trinitrophenol (TNP) and so on. The various fluorescence detection mechanisms were summarized and sorted out in the review, which might help researchers or readers to comprehensively understand the mechanism of the fluorescence detection of nitroaromatics and provide a theoretical basis for the rational design of new crystalline lanthanide-organic complex-based sensors.

A Stable Triphenylamine-Based Zn(II)-MOF for Photocatalytic H2 Evolution and Photooxidative Carbon-Carbon Coupling Reaction

Efficient charge transfer has always been a challenge in heterogeneous MOF-based photoredox catalysis due to the poor electrical conductivity of the MOF photocatalyst, the toilless electron-hole recombination, and the uncontrollable host-guest interactions. Herein, a propeller-like tris(3'-carboxybiphenyl)amine (H₃TCBA) ligand was synthesized to fabricate a 3D Zn₃O cluster-based Zn(II)-MOF photocatalyst, Zn₃(TCBA)₂(μ₃-H₂O)H₂O (Zn-TCBA), which was applied to efficient photoreductive H₂ evolution and photooxidative aerobic cross-dehydrogenation coupling reactions of N-aryl-tetrahydroisoquinolines and nitromethane. In Zn-TCBA, the ingenious introduction of the meta-position benzene carboxylates on the triphenylamine motif not only promotes Zn-TCBA to exhibit a broad visible-light absorption with a maximum absorption edge of 480 nm but also causes special phenyl plane twists with dihedral angles of 27.8-45.8° through the coordination to Zn nodes. The semiconductor-like Zn clusters and the twisted TCBA^3- antenna with multidimensional π interaction sites facilitate photoinduced electron transfer to render Zn-TCBA a good photocatalytic H₂ evolution efficiency of 27.104 mmol·g^-1·h^-1 in the presence of [Co(bpy)₃]Cl₂ under visible-light illumination, surpassing many non-noble-metal MOF systems. Moreover, the positive enough excited-state potential of 2.03 V and the semiconductor-like characteristics of Zn-TCBA endow Zn-TCBA with double oxygen activation ability for photocatalytic oxidation of N-aryl-tetrahydroisoquinoline substrates with a yield up to 98.7% over 6 h. The durability of Zn-TCBA and the possible catalytic mechanisms were also investigated by a series of experiments including PXRD, IR, EPR, and fluorescence analyses.

A highly sensitive and specific luminescent MOF determines nitric oxide production and quantifies hydrogen sulfide-mediated inhibition of nitric oxide in living cells

The synthesis of a novel carboxylate-type organic linker-based luminescent MOF (Zn(H₂L) (L₁)) (named PUC2) (H₂L = 2-aminoterephtalic acid, L₁ = 1-(3-aminopropyl) imidazole) is reported by the solvothermal method and comprehensively characterized using single-crystal XRD, PXRD, FTIR, TGA, XPS, FESEM, HRTEM, and BET. PUC2 selectively reacts with nitric oxide (^▪NO) with a detection limit of 0.08 µM, and a quenching constant (0.5 × 10⁴ M^-1) indicating a strong interaction with ^▪NO. PUC2 sensitivity remains unaffected by cellular proteins or biologically relevant metals (Cu²⁺/ Fe³⁺/Mg²⁺/ Na⁺/K⁺/Zn²⁺), RNS/ROS, or H₂S to score ^▪NO in living cells. Lastly, we used PUC2 to demonstrate that H₂S inhibition increases ^▪NO production by ~ 14-30% in various living cells while exogenous H₂S suppresses ^▪NO production, indicating that the modulation of cellular ^▪NO production by H₂S is rather generic and not restricted to a particular cell type. In conclusion, PUC2 can successfully detect ^▪NO production in living cells and environmental samples with considerable potential for its application in improving the understanding of the role of ^▪NO in biological samples and study the inter-relationship between ^▪NO and H₂S.

Expanding the Knowledge of the Selective-Sensing Mechanism of Nitro Compounds by Luminescent Terbium Metal-Organic Frameworks through Multiconfigurational ab Initio Calculations

The current research shows that the excited-state dynamics of the antenna ligand, both in the interacting system sensor/analyte and in the sensor without analyte, is a safe tool for elucidating the detection principle of the luminescent lanthanide-based metal-organic framework sensors. In this report the detection principle of the luminescence quenching mechanism in two Tb-based MOFs sensors is elucidated. The first system is a luminescent Tb-MOF [Tb(BTTA)_1.5(H₂O)_4.5]_n (H₂BTTA = 2,5-bis(1H-1,2,4-triazol-1-yl) terephthalic acid) selective to nitrobenzene (NB), labeled as Tb-1. The second system is {[Tb(DPYT)(BPDC)_1/2(NO₃)]·H₂O}_n (DPYT = 2,5-di(pyridin-4-yl) terephthalic acid, BPDC = biphenyl-4,4'-dicarboxylic acid), reported as a selective chemical sensor to nitromethane (NM) in situ, labeled as Tb-2. The luminescence quenching of the MOFs is promoted by intermolecular interactions with the analytes that induce destabilization of the T₁ electronic state of the linker "antenna", altering thus the sensitization pathways of the Tb atoms. This study demonstrates the value of host-guest interaction simulations and the rate constants of the radiative and nonradiative processes in understanding and elucidating the sensing mechanism in Ln-MOF sensors.

Design of "turn-off" luminescent Ln-MOFs for sensitive detection of cyanide anions

Two novel 2D lanthanide metal-organic frameworks (Ln-MOFs), namely {[Eu₂(DBTA)₃(DMF)₂]·DMF}_n (1) and {[Tb₂(DBTA)₃(DMF)₂]·DMF}_n (2) (H₂DBTA = 2,5-dibromoterephthalic acid), have been successfully synthesized by the solvothermal method. Single-crystal X-ray diffraction results proved that the complexes possess the same topological structure of a (4²·6)₂(4²·8⁴)(4⁷·6³)₂-connected net. The recognition of CN^- from interfering anions with a low detection limit by "turn-off" luminescence makes them promising candidates for the highly selective and sensitive detection of the cyanide ion. The Ln-MOFs 1 and 2 exhibit excellent chemical sensing properties for CN^- with efficiency, selectivity, and excellent performance in various mixed anions. The evaluation parameters, including the quenching constant and detection limit, have been investigated to obtain the detection performance for CN^-.

Tunable fluorescence emission based on multi-layered MOF-on-MOF

Luminescent metal-organic frameworks (MOFs) have garnered considerable attention in various fields. Herein, we proposed a hierarchical confinement strategy based on MOF-on-MOF to tune luminescence emission ranging from blue to red including white light in a flexible way. The easily available ZIF-8 MOF was used as a host for the confinement of two kinds of size-matching dyes (perylene and rhodamine B) to obtain a layered ZIF-8@dye@ZIF-8@dye via in situ encapsulation and seed-mediated synthesis. ZIF-8@dye@ZIF-8@dye materials with different fluorescence emission in dispersed and solid states were both obtained by tuning the initial encapsulation concentration of dye and changing the structure of the inner and outer ZIF-8@dye layers. To our delight, ZIF-8@0.125perylene@ZIF-8@25RhB with white light emission in the dispersed state was obtained; meanwhile, ZIF-8@0.125perylene + 25RhB and mechanically mixed ZIF-8@0.125perylene + ZIF-8@25RhB could not realize white light emission under the same conditions, indicating that the proposed hierarchical confinement strategy facilitated white light regulation. Similarly, the emission of ZIF-8@dye@ZIF-8@dye in the solid state has also been investigated; ZIF-8@perylene@ZIF-8@3RhB with white light emission was obtained, while white light emission could not be achieved in ZIF-8@perylene + 3RhB and ZIF-8@perylene + ZIF-8@3RhB, which further indicated the importance of the hierarchical confinement strategy based on MOF-on-MOF. The proposed hierarchical confinement strategy may also inspire the development of other functional optical MOF materials.

A selective fluorescence turn-on sensing coordination polymer for antibiotic aztreonam

Reports about the detection of antibiotic aztreonam (ATM) are very rare. Herein, a fluorescent "turn-on" sensing coordination polymer 1 for ATM is described. The good linear relationship between the luminescence intensity and ATM concentration (0-0.135 mM) gave the slope of 20 380 M^-1 and detection limit of 4.44 × 10^-7 M. This work is of great significance, not only because 1 is a sensing material for ATM with excellent selectivity, sensitivity, anti-interference ability and recoverability, but also because it expands the catalogue of antibiotics detection.

A luminescent Zn-MOF for the detection of explosives and development of fingerprints

A luminescent 3D metal-organic framework [Zn(NDA)(AMP)] = PUC1 (where, NDA = naphthalene-2,6-dicarboxylic acid and AMP = 4-aminomethyl pyridine) was synthesized under solvothermal conditions. The synthesized 3D framework was fully characterized with the help of different analytical techniques such as SCXRD, FTIR, TGA, PXRD, SEM, BET, etc. PUC1 exhibited a strong emission peak at 371 nm when excited at 290 nm and the resulting emission was efficiently quenched in the presence of various organic explosive substances like pentaerythritol tetranitrate (PETN), 2,4,6-trinitrophenyl-N-methylnitramine (Tetryl), trinitrotoluene (TNT), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX). PUC1 revealed highly sensitive and selective detection of PETN and Tetryl with high quenching constant values of 0.1 × 10⁶ and 0.12 × 10⁵ M^-1 and low detection limits of 0.315 and 0.404 μM respectively. The strong luminescent properties of PUC1 lead to its successful application in the development of latent fingermarks on different non-porous surfaces using the powder dusting method. The accuracy and applicability of the synthesized material were determined by developing fingerprints by using secretions from eccrine and apocrine glands on a glass slide and various other surfaces, followed by dusting the surfaces. The results so obtained were found to be very accurate and promising.

A Benzothiadiazole-Based Eu3+ Metal-Organic Framework as the Turn-On Luminescent Sensor toward Al3+ and Ga3+ with Potential Bioimaging Application

The design and preparation of novel multifunctional lanthanide metal-organic frameworks (Ln-MOFs) have been arisen widespread attention. In particular, Ln-MOFs have shown great luminescence potential in chemical sensing. Herein, a new benzothiadiazole-based Eu-MOF {[(CH₃)₂NH₂][Eu(BTDB)₂]·2H₂O}_n (JXUST-11) was obtained based on 4,4'-(benzo[c][1,2,5]thiadiazole-4,7-diyl)dibenzoic acid (H₂BTDB), which exhibits a chain-based three-dimensional framework. Moreover, JXUST-11 is considered as a photoluminescent sensor to identify Al³⁺ and Ga³⁺ ions by fluorescence enhancement with the detection limits of 2.9 and 10.2 ppm, severally. Importantly, Al³⁺ and Ga³⁺ can be discerned with the naked eye by color change under a natural lamp. In addition, a portable MOF film based on JXUST-11 was developed for Al³⁺ and Ga³⁺ detection. This is the first Ln-MOF that can be employed as a naked-eye fluorescent probe to identify Ga³⁺. Interestingly, JXUST-11 is also capable of detecting Al³⁺ and Ga³⁺ in living cells.

A turn-on NIR fluorescence sensor for gossypol based on Yb-based metal-organic framework

The development of analytical method for selective and sensitive detection of gossypol (Gsp), an extraction from the cotton plants, is important but still challenging in food safety and medical field. Herein, we reported a turn-on near infrared (NIR) fluorescence detection strategy for Gsp based on a metal-organic framework (MOF), QBA-Yb, which was prepared from 4,4'-(quinolone-5, 8-diyl) benzoate with Yb(NO₃)₃·5H₂O by solvothermal synthesis. The Gsp acted as another "antenna" to sensitize the luminescence of Yb³⁺, leading to the turn-on NIR emission upon 467 nm excitation. As Gsp concentration increased, the NIR emission at 973 nm enhanced gradually, thus enabling highly sensitive Gsp detection in a turn-on way. The experiment and theoretical calculation results revealed the presence of strong hydrogen bonds between Gsp molecules and the MOF skeleton. The developed QBA-Yb probe showed excellent characteristics for detection of Gsp molecules, accompanied by wide linear range (5-160 μg/mL), low detection limit (0.65 μg/mL) and short response time (within 10 min). We have further demonstrated that the QBA-Yb probe was successfully applied for the determination of Gsp in real samples of cottonseeds.

A novel 3D terbium metal-organic framework as a heterogeneous Lewis acid catalyst for the cyanosilylation of aldehyde

A novel 3D lanthanide(iii) metal-organic framework (MOF) (namely Tb-MOF), was synthesized by self-assembly from Tb(iii) ion nitrate and the rigid organic ligand H₂sbdc (H₂sbdc = 5,5-dioxo-5H-dibenzo[b,d]thiophene-3,7-dicarboxylic acid), and could work as an efficient heterogeneous catalyst for the cyanosilylation of aromatic aldehydes at room temperature. The obtained Tb-MOF has been characterized and analysed in detail by single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetric analysis and so on. The pores of Tb-MOF provided a microenvironment that was beneficial for the substrates to be close to the Lewis acid catalytic sites. The IR spectrogram and the fluorescence titration proved that the substrates could be activated inside the channel of Tb-MOF. The heterogeneous Tb-MOF catalyst with fine catalytic efficiency exhibited a high TON (TON = 460), and could be recycled at least three times without significantly reducing its activity.

Synthesis of fluorescent terbium-based metal-organic framework for quantitative detection of nitrite and ferric ions in water samples

Through a solvothermal reaction between the corresponding lanthanide(III) nitrate, 1,10 o-phenanthroline and pyridine 3,5-dicarboxylic acid ligands, a novel two-dimensional terbium-based metal-organic framework (Tb-MOF), named {Tb₂O_0.5(C₁₂H₈N₂)₂(C₇H₃NO₄)₃(H₂O)_2.75}_n (1) with strong fluorescence was synthesized by hydrothermal method. The single crystal structure and phase purity of the as-synthesized Tb-MOF were verified by single crystal X-ray diffraction. Subsequently, some studies on the morphology, structure, and optical properties of the compound were carried out. The results show that the synthesized Tb-MOF (1) can be used for the fluorescence sensing of nitrite and ferric ions. Simultaneously, the as-synthesized crystal structure offers good chemical stability in different environments, such as common organic solvents, solutions with a wide pH range, and aqueous solutions of metal ions. Besides, it has good chemical stability in a certain temperature range. In addition, a detection method for nitrite and iron ions was established based on the principle of fluorescence quenching of Tb-MOF by the analytical target, showing good recovery and precision. The proposed method provides a reliable new method for detecting nitrite and ferric ions concentrations in actual water samples.

Chromic and Fluorescence-Responsive Metal-Organic Frameworks Afforded by N-Amination Modification

Sensory materials that show color and/or fluorescence changes in response to specific gases or vapors have important applications in many fields. Here, we report the postsynthetic preparation of novel sensory metal-organic frameworks (MOFs) and their multiple responsive properties. Through postsynthetic N-amination, the 2,2'-bipyridyl spacers in a Zr(IV) MOF are partially transformed into N-aminobipyridinium. The new MOF (Zr-bpy-A) shows chromic behavior toward ammonia and amines because the electron-deficient pyridinium groups form charge-transfer complexes with amino moieties. It also shows a unique chromic response to formaldehyde owing to the Schiff-base condensation with the N-amino groups. Furthermore, the N-amino group can be used to graft different polycyclic aromatic hydrocarbons, which endow the MOF with strong fluorescence of variable colors and afford a high-contrast fluorescence response to ammonia/amines and formaldehyde associated with the chromic response. The presence of the unquaternized bipyridyl group also leads to a fluorescence response to HCl. The multiple responsive behaviors hold appeal for applications in sensing, switching, and antifake marking, which are illustrated with a test paper and writing ink.

Novel Multifunctional Samarium-Organic Framework for Fluorescence Sensing of Ag+, MnO4 -, and Cimetidine and Electrochemical Sensing of o-Nitrophenol in Aqueous Solutions

A novel Sm-metal-organic framework (MOF) sensor with the molecular formula Sm8(HDBA)6·H2O has been prepared based on a penta-carboxyl organic ligand (H5DBA = 3,5-di(2',4'-dicarboxylphenyl)benzoic acid) and samarium nitrate under solvothermal conditions. Sm-MOF is characterized by single-crystal X-ray diffraction analysis, elemental analysis, thermogravimetric analysis, and powder X-ray diffraction analysis. Structural analysis shows that the dimer metal units are alternately connected to form a one-dimensional chain, and this chain is connected by the bridging carboxyl oxygen of the ligand H5DBA to form a two-dimensional double-layer plane, which then expands into a three-dimensional microporous framework. Fluorescence detection studies show that Sm-MOF can detect Ag+ ions, MnO4 - anions, and cimetidine tablets with high sensitivity and selectivity and can also be used to electrochemically detect o-nitrophenol in water. High-sensitivity detection capability of the Sm-MOF can enrich the application of samarium complexes in multifunctional sensors.

Recent advances in process engineering and upcoming applications of metal-organic frameworks

Progress in metal-organic frameworks (MOFs) has advanced from fundamental chemistry to engineering processes and applications, resulting in new industrial opportunities. The unique features of MOFs, such as their permanent porosity, high surface area, and structural flexibility, continue to draw industrial interest outside the traditional MOF field, both to solve existing challenges and to create new businesses. In this context, diverse research has been directed toward commercializing MOFs, but such studies have been performed according to a variety of individual goals. Therefore, there have been limited opportunities to share the challenges, goals, and findings with most of the MOF field. In this review, we examine the issues and demands for MOF commercialization and investigate recent advances in MOF process engineering and applications. Specifically, we discuss the criteria for MOF commercialization from the views of stability, producibility, regulations, and production cost. This review covers progress in the mass production and formation of MOFs along with future applications that are not currently well known but have high potential for new areas of MOF commercialization.

Luminescent Lanthanide Complex Sensor for Acac and Cd2. Photochem Photobiol 2020;97:664-671. [PMID: 33301596 DOI: 10.1111/php.13366]

In this work, phenylmalonic acid (H₂ pmal) and phenanthroline (phen) are selected to react with Ln(NO₃ )₃ ·6H₂ O (Ln = Tb, Eu) to form two lanthanide coordination complex [Ln₂ (PAA)₄ (phen)₂ (NO₃ )₂ ] (Ln = Tb, Tb complex; Eu, Eu complex), PAA = deprotonated phenylacetic acid, phen = 1,10-phenanthroline). Two lanthanide complexes are stable in neutral, acid (pH = 4) and base (pH = 10) water solutions. Especially, Tb complex is a bifunctional sensor for acac and Cd²⁺ , through luminescence "turn on" and "turn off," respectively. Importantly, the limit of detections (LODs) for acac and Cd²⁺ are 90 nm and 0.5 μm, respectively. Furthermore, the sensing mechanisms are discussed in detail.

Distinct and Selective Amine- and Anion-Responsive Behaviors of an Electron-Deficient and Anion-Exchangeable Metal-Organic Framework

Smart materials that respond to chemical stimuli with color or luminescence changes are highly desirable for daily-life and high-tech applications. Here, we report a novel porous metal-organic framework (MOF) that shows multiple, selective, and discriminative responsive properties owing to the combination of different functional ingredients [tripyridinium chromogen, Eu(III) luminophore, cationic framework, and special porous structure]. The MOF contains two interpenetrated three-dimensional cationic coordination networks built of a tetrahedral [Eu₄(μ₃-OH)₄] cluster and a tripyridinium-tricarboxylate zwitterionic linker. It shows reversible and discriminative chromic response to aliphatic amines and aniline through different host-guest interactions between electron-deficient pyridinium and electron-rich amines. The size- and shape-selective response to aliphatic amines is ascribed to the radical formation through host-guest electron transfer, whereas the response to aniline is ascribed to the formation of sandwich-type acceptor-donor-acceptor complexes. The MOF is capable of reversible anion exchange with various anions and shows selective and discriminative ionochromic response to iodide, bromide, and thiocyanate, which is attributed to charge-transfer complexation. The above chromic behaviors are accompanied by efficient quenching of Eu(III) photoluminescence. The MOF represents a multi-stimuli dual-output responsive system. It can be used for discrimination and identification of anions and amines. The potential use in invisible printing, reusable sensory films, and optical switches was demonstrated by the ink and the membrane made of the MOF and organic polymers.

Luminescent triphenylamine-based metal-organic frameworks: recent advances in nitroaromatics detection

Luminescent metal-organic frameworks (LMOFs), as one branch of MOFs, have attracted considerable attention in recent years due to their good crystallinity, structural diversity, tunable porosity and easily induced fluorescence emission. Importantly, their photoluminescence (PL) properties can be adjusted by altering metal ions or metal clusters and organic ligands in one hybrid system. Among the various sensing applications, using LMOFs as chemical sensors to detect the explosive and environment pollution causing nitroaromatic compounds (NACs) is an important topic. In this account, we describe the recent advancements in the field of NAC detection by LMOFs based on the triphenylamine (TPA) unit as the π-conjugated fluorophore.

Conductive MOFs with Photophysical Properties: Applications and Thin-Film Fabrication

Metal-organic frameworks (MOFs) are a class of hybrid materials with many promising applications. In recent years, lots of investigations have been oriented toward applications of MOFs in electronic and photoelectronic devices. While many high-quality reviews have focused on synthesis and mechanisms of electrically conductive MOFs, few of them focus on their photophysical properties. Herein, we provide an in-depth review on photoconductive and photoluminescent properties of conductive MOFs together with their corresponding applications in solar cells, luminescent sensing, light emitting, and so forth. For integration of MOFs with practical devices, recent advances in fabrication of photoactive MOF thin films are also summarized.

Coordination Polymers Based on Highly Emissive Ligands: Synthesis and Functional Properties

Coordination polymers are constructed from metal ions and bridging ligands, linking them into solid-state structures extending in one (1D), two (2D) or three dimensions (3D). Two- and three-dimensional coordination polymers with potential voids are often referred to as metal-organic frameworks (MOFs) or porous coordination polymers. Luminescence is an important property of coordination polymers, often playing a key role in their applications. Photophysical properties of the coordination polymers can be associated with intraligand, metal-centered, guest-centered, metal-to-ligand and ligand-to-metal electron transitions. In recent years, a rapid growth of publications devoted to luminescent or fluorescent coordination polymers can be observed. In this review the use of fluorescent ligands, namely, 4,4'-stilbenedicarboxylic acid, 1,3,4-oxadiazole, thiazole, 2,1,3-benzothiadiazole, terpyridine and carbazole derivatives, naphthalene diimides, 4,4',4''-nitrilotribenzoic acid, ruthenium(II) and iridium(III) complexes, boron-dipyrromethene (BODIPY) derivatives, porphyrins, for the construction of coordination polymers are surveyed. Applications of such coordination polymers based on their photophysical properties will be discussed. The review covers the literature published before April 2020.

A Luminescent Mg-Metal-Organic Framework for Sustained Release of 5-Fluorouracil: Appropriate Host-Guest Interaction and Satisfied Acid-Base Resistance

It is important to achieve a moderate sustained release rate for drug delivery, so it is critical to regulate the host-guest interactions for the rational design of a carrier. In this work, a nano-sized biocompatible metal-organic framework (MOF), Mg(H₂TBAPy)(H₂O)₃·C₄H₈O₂ (TDL-Mg), was constructed by employing π-conjugated 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H₄TBAPy) as a ligand and used for 5-fluorouracil (5-FU) loading (28.2 wt %) and sustained slow release. TDL-Mg exhibits a 3D supramolecular architecture featuring a 1D rectangle channel with a size of 6.2 × 8.1 Ų and a Brunauer-Emmett-Teller surface area of 627 m²·g^-1. Channel microenvironment analysis shows that the rigid H₂TBAPy^2- ligand adopts special torsion to stabilize the channels and offer rich π-binding sites; the partially deprotonated carboxyls not only participate in the formation of strong hydrogen bonds but also create a mild pH buffer environment for biological applications. Suitable host-guest interactions are generated by the synergistic effect of polydirectional hydrogen bonds, multiple π-interactions, and confined channels, which allow 5-FU@TDL-Mg to release 76% of load in 72 h, a medically reasonable rate. Microcalorimetry was used to directly quantify these host-guest interactions with a moderate enthalpy of 22.3 kJ·mol^-1, which provides a distinctive thermodynamic interpretation for understanding the relationship between the MOF design and the drug release rate. Additionally, the nano-sized 5-FU@TDL-Mg can be taken up by mouse breast cancer cells (4T1 cells) for imaging based on the dramatic fluorescence change during the release of 5-FU, exhibiting potential applications in biological systems.

Eu(III) Tetrahedron Cage as a Luminescent Chemosensor for Rapidly Reversible and Turn-On Detection of Volatile Amine/NH3

Because of the involvement of the gas-solid diffusion, device fabrication, and the relatively complex photophysical process, the lanthanide complexes are rarely exploited as fluorescence sensors for volatile compound (VC) detection. Herein, we report the first example of a discrete 3D Ln-based architecture as a sensor for VCs. The designed Eu₄L₄ tetrahedral cage shows highly selective, rapidly reversible, and turn-on emissive responses toward volatile amines/NH₃ in a spin-coated film. Through the comprehensive spectral characteristic and density functional theory calculation, an intermolecular weak nucleophilic interaction is proposed for this response mechanism. Combining this weak interactions with the permeability of the cage, the film presents subsecond to second timescales rapid response; combining the fitting electrophilic capability of the β-diketonate units to amine nitrogen with the tunable intramolecular charge-transfer feature, the cage shows excellent selectivity and turn-on emissive response. This work provides a new clue to develop the lanthanide complexes as luminescence probes for VCs.

Two d10 luminescent metal-organic frameworks as dual functional luminescent sensors for (Fe3+,Cu2+) and 2,4,6-trinitrophenol (TNP) with high selectivity and sensitivity

Two luminescent 3D supramolecular structures [Cd3(L)2(2,2-bipy)2](DMF)3(CH3CH2OH)2(H2O) (1) and [Zn3(L)2(2,2-bipy)2(DMF)2](DMF)2(CH3CH2OH)2(H2O) (2) (H3L = 4,4',4''-nitrilotribenzoic acid) have been successfully synthesized under solvothermal conditions using Cd(NO3)2·4H2O or Zn(NO3)2·6H2O as the metal sources, and 4,4',4''-nitrilotribenzoic acid (H3L), 2,2-bipy as the ligands in DMF solvent. Compound 1 displays a bi-nodal (2,3,6)-coordinated net with {83}2{86·126·163}{8}6 topology, compound 2 can be described as a (3,6)-connected 2-nodal net with kgd topology. The phase purity of compound 1 and 2 is characterized by X-ray powder diffraction (XRPD), thermogravimetric analysis (TGA) and Fourier transform infrared (FT-IR) spectroscopy. Compound 1 and 2 can serve as effective luminescent sensors for Fe3+, Cu2+ and TNP via luminescent quenching.

Functional construction of a water-stable Tb-coordination polymer luminescent sensor for highly selective detection of picric acid in an aquatic environment

In order to achieve convenient and efficient detection of picric acid in a water environment, based on function-oriented strategy, we combine luminescence performance with recognition performance, taking into account the application conditions.