Iron(II) Mediated Desulfurization of Organosulfur Substrates Produces Nonheme Diiron(II)-hydrosulfides

Nonheme binuclear transition metal complexes with hydrosulfide and polychalcogenides

The intriguing chemistry of chalcogen (S, Se)-containing ligands and their capability to bridge multiple metal centres have resulted in a plethora of reports on transition metal complexes featuring hydrosulfide (HS-) and polychalcogenides (En2-, E = S, Se). While a large number of such molecules are strictly organometallic complexes, examples of non-organometallic complexes featuring HS- and En2- with N-/O-donor ligands are relatively rare. The general synthetic procedure for the transition metal-hydrosulfido complexes involves the reaction of the corresponding metal salts with HS-/H2S and this is prone to generate sulfido bridged oligomers in the absence of sterically demanding ligands. On the other hand, the synthetic methods for the preparation of transition metal-polychalcogenido complexes include the reaction of the corresponding metal salts with En2- or the two electron oxidation of low-valent metals with elemental chalcogen, often at an elevated temperature and/or for a long time. Recently, we have developed new synthetic methods for the preparation of two new classes of binuclear transition metal complexes featuring either HS-, or Sn2- and Sen2- ligands. The new method for the synthesis of transition metal-hydrosulfido complexes involved transition metal-mediated hydrolysis of thiolates at room temperature (RT), while the method for the synthesis of transition metal-polychalcogenido complexes involved redox reaction of coordinated thiolates and exogenous elemental chalcogens at RT. An overview of the synthetic aspects, structural properties and intriguing reactivity of these two new classes of transition metal complexes is presented.

Generation and Reactivity of Polychalcogenide Chains in Binuclear Cobalt(II) Complexes

A series of six binuclear Co(II)-thiolate complexes, [Co2(BPMP)(S-C6H4-o-X)2]1+ (X = OMe, 2; NH2, 3), [Co2(BPMP)(μ-S-C6H4-o-O)]1+ (4), and [Co2(BPMP)(μ-Y)]1+ (Y = bdt, 5; tdt, 6; mnt, 7), has been synthesized from [Co2(BPMP)(MeOH)2(Cl)2]1+ (1a) and [Co2(BPMP)(Cl)2]1+ (1b), where BPMP1- is the anion of 2,6-bis[[bis(2-pyridylmethyl)amino]methyl]-4-methylphenol. While 2 and 3 could allow the two-electron redox reaction of the two coordinated thiolates with elemental sulfur (S8) to generate [Co2(BPMP)(μ-S5)]1+ (8), the complexes, 4-7, could not undergo a similar reaction. An analogous redox reaction of 2 with elemental selenium ([Se]) produced [{Co2(BPMP)(μ-Se4)}{Co2(BPMP)(μ-Se3)}]2+ (9a) and [Co2(BPMP)(μ-Se4)]1+ (9b). Further reaction of these polychalcogenido complexes, 8 and 9a/9b, with PPh3 allowed the isolation of [Co2(BPMP)(μ-S)]1+ (10) and [Co2(BPMP)(μ-Se2)]1+ (11), which, in turn, could be converted back to 8 and 9a upon treatment with S8 and [Se], respectively. Interestingly, while the redox reaction of the polyselenide chains in 9a and 11 with S8 produced 8 and [Se], the treatment of 8 with [Se] gave back only the starting material (8), thus demonstrating the different redox behavior of sulfur and selenium. Furthermore, the reaction of 8 and 9a/9b with activated alkynes and cyanide (CN-) allowed the isolation of the complexes, [Co2(BPMP)(μ-E2C2(CO2R)2)]1+ (E = S: 12a, R = Me; 12b, R = Et; E = Se: 13a, R = Me; 13b, R = Et) and [Co2(BPMP)(μ-SH)(NCS)2] (14), respectively. The present work, thus, provides an interesting synthetic strategy, interconversions, and detailed comparative reactivity of binuclear Co(II)-polychalcogenido complexes.

Metal-free reductive desulfurization of C-sp3-substituted thiols using phosphite catalysis

Phosphines and phosphites are critical tools for non-metal desulfurative methodologies due to the strength of the P[double bond, length as m-dash]S bond. An overarching premise in these methods has been that stoichiometric (or excess) P(iii) reagent is required for reactivity. Despite decades of research, a desulfurative process that is catalytic in phosphine/phosphite has not been reported. Here, we report the successful merging of two thermal radical processes: the desulfurization of unactivated and activated alkyl thiols and the reduction of P(v) = S to P(iii) by reaction with a silyl radical species. We employ catalytic trimethyl phosphite, catalytic azo-bis(cyclohexyl)nitrile, and two equivalents of tris(trimethylsilyl)silane as the stoichiometric reductant and sulfur atom scavenger. This method is tolerant of common organic functional groups and affords products in good to excellent yields.

Catalytic Hydrolysis of Thiolates to Alcohols

A new and efficient catalytic hydrolysis of aliphatic and aromatic thiolates under ambient conditions is presented. Previously, we have demonstrated (Ganguly et al., Inorg. Chem. 2018, 57, 11306-11309) the Co(II) mediated stoichiometric hydrolysis of thiols to produce alcohols/phenols along with a binuclear dicobalt(II)-hydrosulfide complex, [Co₂(PhBIMP)(μ₂-SH)(DMF)]²⁺ (1) (PhBIMP is the anion of 2,6 bis[(bis((N-1-methyl-4,5- diphenylimidazoylmethyl) amino)methyl]- 4-methylphenol). In the present work, we have shown that the product of the stoichiometric reaction, 1, may act as an efficient catalyst for the catalytic hydrolysis of a broad range of aliphatic and aromatic thiolates in DMF at room temperature to produce alcohols/phenols. Complex 1 takes up a thiolate (RS^-) and a water molecule to generate an active intermediate complex, [Co₂(PhBIMP)(μ₂-SH)(RS)(H₂O)]¹⁺ (2), which, in turn, releases the alcohol/phenol (ROH), hydrosulfide (HS^-), and regenerates 1.

A Monohydrosulfidodinitrosyldiiron Complex That Generates N2O as a Model for Flavodiiron Nitric Oxide Reductases: Reaction Mechanism and Electronic Structure

Flavodiiron nitric oxide reductases (FNORs) protect microbes from nitrosative stress under anaerobic conditions by mediating the reduction of nitric oxide (NO) to nitrous oxide (N2O). The proposed mechanism for the catalytic reduction of NO by FNORs involves a dinitrosyldiiron intermediate with a [hs-{FeNO}7]2 formulation, which produces N2O and a diferric species. Moreover, both NO and hydrogen sulfide (H2S) have been implicated in several similar physiological functions in biology and are also known to cross paths in cell signaling. Here we report the synthesis, spectroscopic and theoretical characterization, and N2O production activity of an unprecedented monohydrosulfidodinitrosyldiiron compound, with a [(HS)hs-{FeNO}7/hs-{FeNO}7] formulation, that models the key dinitrosyl intermediate of FNORs. The generation of N2O from this unique compound follows a semireduced pathway, where one-electron reduction generates a reactive hs-{FeNO}8 center via the occupation of an Fe-NO antibonding orbital. In contrast to the well-known reactivity of H2S and NO, the coordinated hydrosulfide remains unreactive toward NO and acts only as a spectator ligand during the NO reduction process.

Thiolate Coordination vs C-S Bond Cleavage of Thiolates in Dinickel(II) Complexes

A detailed study for the synthesis of dinickel(II)-thiolate and dinickel(II)-hydrosulfide complexes and the complete characterization of the relevant intermediates involved in the C-S bond cleavage of thiolates are presented. Hydrated Ni(II) salts mediate the hydrolytic C-S bond cleavage of thiolates (NaSR/RSH; R = Me, Et, ⁿBu, ^tBu), albeit inefficiently, to yield a mixture of a dinickel(II)-hydrosulfide complex, [Ni₂(BPMP)(μ-SH)(DMF)₂]²⁺ (1), and the corresponding dinickel(II)-thiolate complexes, such as [Ni₂(BPMP)(μ-SEt)(ClO₄)]¹⁺ (2) (HBPMP is 2,6-bis[[bis(2-pyridylmethyl)amino]methyl]-4-methylphenol). A systematic study for the reactivity of thiolates with Ni(II) was therefore pursued which finally yielded 1 as a pure product which has been characterized in comparison with the dinickel(II)-dichloride complex, [Ni₂(BPMP)(Cl)₂(MeOH)₂]¹⁺ (3). While the reaction of thiolates with anhydrous Ni(OTf)₂ in dry conditions could only yield [Ni₂(BPMP)(OTf)₂]¹⁺ (5) instead of the expected dinickel(II)-thiolate compound, the C-S bond cleavage could be suppressed by the use of a chelating thiol, such as PhCOSH, to yield [Ni₂(BPMP)(SCOPh)₂]¹⁺ (6). Finally, with the suitable choice of a monodentate thiol, a dinickel(II)-monothiolate complex, [Ni₂(BPMP)(SPh)(DMF)(MeOH)(H₂O)]²⁺ (7), was isolated as a pure product within 1 h of reaction, which after a longer time of reaction yielded 1 and PhOH. Complex 7 may thus be regarded as the intermediate that precedes the C-S bond cleavage and is generated by the reaction of a thiolate with an initially formed dinickel(II)-solvento complex, [Ni₂(BPMP)(MeOH)₂(H₂O)₂]³⁺(4). Selected dinickel(II) complexes were explored further for the scope of substitution reactions, and the results include the isolation of a dinickel(II)-bis(thiolate) complex, [Ni₂(BPMP)(μ-SPh)₂]¹⁺ (8).

Synthesis and redox reactions of binuclear zinc(ii)–thiolate complexes with elemental sulfur

The synthesis, characterization and reactivity of a series of binuclear zinc(ii) complexes are described featuring the redox reaction of coordinated thiolates with elemental sulfur.

Hydrosulfide complexes of the transition elements: diverse roles in bioinorganic, cluster, coordination, and organometallic chemistry

Molecules containing transition metal hydrosulfide linkages are diverse, spanning a variety of elements, coordination environments, and redox states, and carrying out multiple roles across several fields of chemistry.