Rapeseed Protein Nanogels As Novel Pickering Stabilizers for Oil-in-Water Emulsions

Toward Diverse Plant Proteins for Food Innovation

This review highlights the development of plant proteins from a wide variety of sources, as most of the research and development efforts to date have been limited to a few sources including soy, chickpea, wheat, and pea. The native structure of plant proteins during production and their impact on food colloids including emulsions, foams, and gels are considered in relation to their fundamental properties, while highlighting the recent developments in the production and processing technologies with regard to their impacts on the molecular properties and aggregation of the proteins. The ability to quantify structural, morphological, and rheological properties can provide a better understanding of the roles of plant proteins in food systems. The applications of plant proteins as dairy and meat alternatives are discussed from the perspective of food structure formation. Future directions on the processing of plant proteins and potential applications are outlined to encourage the generation of more diverse plant-based products.

Relationship between the interfacial properties of lactoferrin-(-)-epigallocatechin-3-gallate covalent complex and the macroscopic properties of emulsions

This study explored the relationship between the interfacial behavior of lactoferrin-(-)-epigallocatechin-3-gallate covalent complex (LF-EGCG) and the stability of high internal phase Pickering emulsions (HIPPEs). The formation of covalent bond between lactoferrin and polyphenol was verified by the increase in molecular weight. In LF-EGCG group, the surface hydrophobicity, interfacial pressure, and adsorption rate were decreased, while the molecular flexibility, interfacial film viscoelasticity, and interfacial protein content were increased. Meanwhile, LF-EGCG HIPPE possessed reduced droplet size, increased ζ-potential and stability. Rheology showed the viscoelasticity, structural recovery and gel strength of LF-EGCG HIPPE were improved, giving HIPPE inks better 3D printing integrity and clarity. Moreover, the free fatty acids (FFA) release of LF-EGCG HIPPE (62.6%) was higher than that of the oil group (50.1%). Therefore, covalent treatment effectively improved the interfacial properties of protein particles and the stability of HIPPEs. The macroscopic properties of HIPPEs were positively regulated by the interfacial properties of protein particles. The result suggested that the stability of emulsions can be improved by regulating the interfacial properties of particles.

Oilseed meal proteins: From novel extraction methods to nanocarriers of bioactive compounds

The global demand for animal proteins is predicted to increase twofold by 2050. This has led to growing environmental and health apprehensions, thereby prompting the appraisal of alternative protein sources. Oilseed meals present a promising alternative due to their abundance in global production and inherent dietary protein content. The alkaline extraction remains the preferred technique for protein extraction from oilseed meals in commercial processes. However, the combination of innovative techniques has proven to be more effective in the recovery and functional modification of oilseed meal proteins (OMPs), resulting in improved protein quality and reduced allergenicity and environmental hazards. This manuscript explores the extraction of valuable proteins from sustainable sources, specifically by-products from the oil processing industry, using emerging technologies. Chemical structure, nutritional value, and functional properties of the main OMPs are evaluated with a particular focus on their potential application as nanocarriers for bioactive compounds.

Enhanced emulsification performance and interfacial properties of Janus-like rapeseed cruciferin through asymmetric acylation modification

Plant protein emulsifiers, particularly rapeseed protein isolate with its superior amino acid composition and predominantly globular protein, have captured significant interest in the food industry. Nonetheless, the application of these proteins has been stymied by their lackluster emulsification properties. Addressing this challenge, our study implements an innovative asymmetric acylation technique to modify the surface of rapeseed cruciferin (RC), morphing it into a structure resembling Janus nanoparticles. This alteration amplifies the emulsification prowess of RC by a remarkable 2.7 times compared to its natural form, and 1.43 times over its conventionally acylated counterpart. The asymmetrically acylated RC, marked by a distinctive three-phase contact angle of 90.4°, manifests an outstanding amphiphilic character. Moreover, it surpasses both the natural and conventionally acylated RC in terms of diffusion, penetration, and rearrangement rates, as well as protein concentration at the oil-water interface. Compared to commonly used emulsifiers in the food industry, such as lecithin and soy protein, the asymmetrically acylated RC stands out, stabilizing emulsions with the tiniest particle size and effectively staving off emulsion stratification over a longer duration. This study underscores that asymmetric acylation serves as a reliable methodology for producing efficient plant protein emulsifiers, considerably amplifying their utility in the food industry.

Self-Healing Composite Coating Fabricated with a Cystamine Cross-Linked Cellulose Nanocrystal-Stabilized Pickering Emulsion

A gelled Pickering emulsion system was fabricated by first stabilizing linseed oil droplets in water with dialdehyde cellulose nanocrystals (DACNCs) and then cross-linking with cystamine. Cross-linking of the DACNCs was shown to occur by a reaction between the amine groups on cystamine and the aldehyde groups on the CNCs, causing gelation of the nanocellulose suspension. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy were used to characterize the cystamine-cross-linked CNCs (cysCNCs), demonstrating their presence. Transmission electron microscopy images evidenced that cross-linking between cysCNCs took place. This cross-linking was utilized in a linseed oil-in-water Pickering emulsion system, creating a novel gelled Pickering emulsion system. The rheological properties of both DACNC suspensions and nanocellulose-stabilized Pickering emulsions were monitored during the cross-linking reaction. Dynamic light scattering and confocal laser scanning microscopy (CLSM) of the Pickering emulsion before gelling imaged CNC-stabilized oil droplets along with isolated CNC rods and CNC clusters, which had not been adsorbed to the oil droplet surfaces. Atomic force microscopy imaging of the air-dried gelled Pickering emulsion also demonstrated the presence of free CNCs alongside the oil droplets and the cross-linked CNC network directly at the oil-water interface on the oil droplet surfaces. Finally, these gelled Pickering emulsions were mixed with poly(vinyl alcohol) solutions and fabricated into self-healing composite coating systems. These self-healing composite coatings were then scratched and viewed under both an optical microscope and a scanning electron microscope before and after self-healing. The linseed oil was demonstrated to leak into the scratches, healing the gap automatically and giving a practical approach for a variety of potential applications.

The influence of α and α' subunits on SPI Pickering emulsions based on natural hybrid breeding varieties

In this study, food-grade protein nanoparticles (Wild-NPs, α-lack-NPs, α'-lack-NPs, and (α + α')-lack-NPs) were organized as emulsion stabilizers via thermal induction. The effects of α and α' subunits in soybean protein isolate (SPI) on Wild nanoparticle Pickering emulsion (Wild-NPPEs), α-lack nanoparticle Pickering emulsion (α-lack-NPPEs), α'-lack nanoparticle Pickering emulsion (α'-lack-NPPEs) and (α + α')-lack nanoparticle Pickering emulsion ((α + α')-lack-NPPEs) were investigated. The Pickering emulsion stabilization mechanism indicated that the α'-lack-NPs particle size, surface hydrophobicity, and contact angle were mostly comparatively large. Therefore, the absence of the α' subunit made the desorption of protein nanoparticles at the oil and water interface require higher energy. Through the hydrophobic interaction between molecules, the structure and properties of the emulsion were improved, showing good stability. The existence of α'-lack-NPPEs leads to the formation of a gel-like network in the emulsion, which increases the viscosity of the emulsion and makes the network structure of the emulsion more uniform and denser.

A Review of the Utilization of Canola Protein as an Emulsifier in the Development of Food Emulsions

Canola is the second-largest cultivated oilseed crop in the world and produces meal consisting of about 35-40% proteins. Despite this, less than 1% of the global plant-based protein market is taken up by canola protein. The reason behind such underutilization of canola protein and its rapeseed counterpart could be the harsh conditions of the industrial oil extraction process, the dark colour of the meal, the presence of various antinutrients, the variability in the protein composition based on the source, and the different properties of the two major protein components. Although academic research has shown immense potential for the use of canola protein and its rapeseed counterpart in emulsion development and stabilization, there is still a vast knowledge gap in efficiently utilizing canola proteins as an effective emulsifier in the development of various emulsion-based foods and beverages. In this context, this review paper summarizes the last 15 years of research on canola and rapeseed proteins as food emulsifiers. It discusses the protein extraction methods, modifications made to improve emulsification, emulsion composition, preparation protocols, and emulsion stability results. The need for further improvement in the scope of the research and reducing the knowledge gap is also highlighted, which could be useful for the food industry to rationally select canola proteins and optimize the processing parameters to obtain products with desirable attributes.

Smart stimuli-responsive polysaccharide nanohydrogels for drug delivery: a review

Polysaccharides have found extensive utilization as biomaterials in drug delivery systems owing to their remarkable biocompatibility, simple functionalization, and inherent biological properties. Within the array of polysaccharide-based biomaterials, there is a growing fascination for self-assembled polysaccharide nanogels (NG) due to their ease of preparation and enhanced appeal across diverse biomedical appliances. Nanogel (or nanohydrogel), networks of nanoscale dimensions, are created by physically or chemically linking polymers together and have garnered immense interest as potential carriers for delivering drugs due to their favorable attributes. These include biocompatibility, high stability, the ability to adjust particle size, the capacity to load drugs, and their inherent potential to modify their surface to actively target specific cells or tissues via the attachment of ligands that can recognize corresponding receptors. Nanogels can be engineered to respond to specific stimuli, such as pH, temperature, light, or redox conditions, allowing controlled release of the encapsulated drugs. This intelligent targeting capability helps prevent drug accumulation in unintended tissues and reduces the potential side effects. Herein, an overview of nanogels is offered, comprising their methods of preparation and the design of stimulus-responsive nanogels that enable controlled release of drugs in response to specific stimuli.

Pickering emulsion stabilized by Haematococcus pluvialis protein particles and its application in dumpling stuffing

In this study, the oil-in-water Pickering emulsions were prepared using Haematococcus Pluvialis protein (HPP) particles as an emulsifier by a simple one-step emulsification method. The internal oil phase was as high as 70 % due to the excellent emulsifying properties of HPP, and the average size of oil droplets in the emulsion was around 20 μm. The emulsion prepared by 2.5 % HPP with the oil phase ratio of 70 % showed the best stability after 14 days of storage, and the emulsion could maintain stability at acidic condition, high ionic strength, low and high temperatures. However, all emulsion samples exhibited shear thinning phenomenon, and the higher HPP concentration and oil phase ratio led to greater G' and G″ modulus. NMR relaxation results showed that high concentration HPP could limit the mobility of free water in the emulsion and improve the emulsion stability. The HPP-stabilized emulsion could inhibit the oxidation of oil phase during storage due to the DPPH and ABTS radical scavenging activity of astaxanthin (AST) in HPP. Finally, the nutritional microspheres based on HPP-stabilized emulsion showed good stability in traditional dumplings and could reduce the loss of AST and DHA in algae oil during the boiling of dumplings.

The preparation of Diacylglycerol-rich soybean oil by acetylated modification of arachin nanoparticles for W/O Pickering emulsion system

Pickering emulsion catalytic system (PEC) stabilized by nanoparticles is an efficient catalytic platform. Herein, a high-performance PEC was constructed by acetylated modification of arachin nanoparticles (AAPs). The results showed the pI of arachin was decreased from pH 5.5 to pH 3.5. The surface hydrophobicity index was significantly increased (from 56.28 ± 4.23 to 120.77 ± 0.79) after acetylated modification. The three-phase contact angle of AAPs was 91.20 ± 0.98°. AAPs were used as lipase immobilization carriers to increase the activity of free lipase fabricating lipase-AAPs. The immobilization efficiency and activity of lipase-AAPs were 12.95 ± 0.03% and 1.74 ± 0.07 U/mg, respectively. Enzymatic reaction kinetics showed that V_m of lipase-AAPs was twice of free lipase. K_m was 1/5 of free lipase. The catalytic efficiency of PEC to prepare DAG was 2.36 times of biphasic catalytic system (BCS). This work provided a promising way to promote the efficiency of DAG preparation.

A Plant-Based Animal Fat Analog Produced by an Emulsion Gel of Alginate and Pea Protein

As the market for plant-based meat analogs grows, the development of plant-based animal fat analogs has become increasingly important. In this study, we propose an approach by developing a gelled emulsion based on sodium alginate, soybean oil (SO), and pea protein isolate. Formulations containing 15% to 70% (w/w) SO were successfully produced without phase inversion. The addition of more SO resulted in pre-gelled emulsions with a more elastic behavior. After the emulsion was gelled in the presence of calcium, the color of the gelled emulsion changed to light yellow, and the formulation containing 70% SO exhibited a color most similar to actual beef fat trimming. The lightness and yellowness values were greatly influenced by the concentrations of both SO and pea protein. Microscopic images revealed that pea protein formed an interfacial film around the oil droplets, and the oil was more tightly packed at higher oil concentrations. Differential scanning calorimetry showed that lipid crystallization of the gelled SO was influenced by the confinement of the alginate gelation, but the melting behavior was like that of free SO. FTIR spectrum analysis indicated a potential interaction between alginate and pea protein, but the functional groups of SO were unchanged. Under mild heating conditions, gelled SO exhibited an oil loss similar to that observed in actual beef trims. The developed product has the potential to mimic the appearance and slow-rendering melting attribute of real animal fat.

Effect of salt treatment on the stabilization of Pickering emulsions prepared with rice bran protein

In this study, salt addition (NaCl and CaCl₂) was utilized to improve the stability of emulsions formed by rice bran protein (RBP). The result showed that salt addition improved the adsorption of protein on the oil-water interface and enhanced the physical stability of emulsions. Compared to NaCl condition, emulsions with CaCl₂ (especially 200 mM) addition exhibited more significant storage stability, as microscopy images showed emulsion structure unchanged and droplet size increasing slightly from 12.02 µm to 16.04 µm in 7 days. It was attributed to the strengthened particle complexation with CaCl₂ and the increased hydrophobic interactions, which is explained by the improved particle size (260.93 nm), surface hydrophobicity (1890.10) and fluorescence intensity, thus inducing dense and hardly destroyed interfacial layers. Rheological behavior analyses suggested that salt-induced emulsions had higher viscoelasticity and maintained a stable gel-like structure. The result of study explored the mechanism of salt treated protein particles, developed a further understanding of Pickering emulsion, and was beneficial to the application of RBP.

Factors that affect Pickering emulsions stabilized by mesoporous hollow silica microspheres

HYPOTHESIS

Classical (solid particles stabilized) Pickering emulsions have been widely studied due to the irreversible adsorption of solid particles at the oil-water interface. Mesoporous hollow silica microspheres (MHSMs) are promising stabilizers for Pickering emulsion owing to its larger specific surface area and lower apparent density. However, this type of Pickering emulsion has not attracted enough attention. The stabilization mechanism of Pickering emulsion by MHSMs has not been studied in detail yet.

EXPERIMENTS

Herein, stable Pickering emulsions were prepared using only MHSMs as stabilizers. In order to investigate its stabilization mechanism, the effect factors of size, shell thickness, wettability and concentration of MHSMs, and oil/water ratio on the stability of Pickering emulsions were analyzed deeply.

FINDINGS

As a result, the stability of Pickering emulsion can be improved by MHSMs with smaller particle size and shell thickness. Also, MHSMs with the intermediate hydrophobicity and suitable oil/water ratio actually do favour for the stability of Pickering emulsion. As expected, the stability of Pickering emulsion can be enhanced by increasing the concentration of MHSMs in a certain range. The Pickering emulsions tend to achieve excellent stable state when the concentration of MHSMs is 1.25 mg/mL. All those results suggested that the stability of Pickering emulsions correlates directly to particle size, shell thickness, wettability and concentration of MHSMs, and oil/water ratio. This research paves a way for the fabrication of functional materials via Pickering emulsions.

Fabrication and Characterization of the Egg-White Protein Chitosan Double-Layer Emulsion

Egg-white protein has an abundance of hydrophobic amino acids and could be a potential emulsifier after modification. Here, egg-white protein was modified via ultrasonic and transglutaminase treatments to destroy the globular structure. The egg-white protein gel particles (EWP-GPs) were prepared and then a novel highly stable EWP-chitosan double-layer emulsion was constructed. When ultrasonic treatment was applied at 240 W and TGase (20 U/g EWP) treatment, the EWP-GPs had a low particle size and good emulsification performance. The particle size of EWP-GPs was a minimum of 287 nm, and the polymer dispersity index (PDI) was 0.41. The three-phase contact angle (θ_o/w) of EWP-GPs was 79.6° (lower than 90°), performing with good wettability. Based on these results, the EWP-chitosan double-layer emulsion was prepared through the EWP-GPs being treated with 240 W ultrasound, TGase, and chitosan in this study. When the double-layer emulsion had 0.6% (v/v) chitosan, the zeta potential of the double-layer emulsion was -1.1 mV and the double-layer emulsion had a small particle size (56.87 µm). The creaming index of double-layer emulsion at 0.6% (v/v) chitosan was 16.3% and the droplets were dispersed uniformly. According to the rheological results, the storage modulus (G') was larger than the loss modulus (G″) in the whole frequency, indicating the formation of an elastic gel network structure in the emulsion. It is hoped to develop a novel food-grade stabilizer and a stable double-layer emulsion, providing new environment-friendly processing in hen egg products and delivery systems.

Formation and stability of Pickering emulsion gels by insoluble soy peptide aggregates through hydrophobic modification

In this work, a highly stable food-grade Pickering emulsion gels was successfully prepared by hydrophobically modified insoluble soybean peptide aggregates. The relationships between the surface properties of insoluble soybean peptide aggregates and Pickering emulsion gels characteristics were clarified. After modification, the insoluble soybean peptide aggregates with high surface hydrophobicity had small particle size (377 nm), near-neutral wettability (θo/w = 92°) and strong interfacial adsorption capability. These allowed the modified insoluble soybean peptide aggregates to stabilize the oil-water interface and form continuous network surrounding oil droplets, leading to the formation of stable Pickering emulsion gels. Besides, Pickering emulsion gels prepared by insoluble soybean peptide aggregates with higher surface hydrophobicity had smaller droplet size and higher gel strength, and remained stable even after 60 days of storage. The findings suggest a preferable plant protein particle for the preparation of stable Pickering emulsion gels in food industry.

Emulsifying properties and bioavailability of clove essential oil Pickering emulsions stabilized by octadecylaminated carboxymethyl curdlan

In the present study, clove essential oil (CEO) Pickering emulsions were stabilized by octadecylamine-modified carboxymethyl curdlan (CMCD-ODA) at different pH values. The droplet size and negatively charged zeta potential of the CMCD-ODA emulsions decreased as the pH increased from 3.0 to 11.0. Rheology results indicated that the CMCD-ODA polymer/emulsion prepared at pH 5.0 showed higher apparent viscosity and viscoelasticity than other pH conditions, which might prevent droplets from flocculating. The Pickering emulsions obtained at pH 5.0 were spherical droplets with a uniform size distribution and a mean diameter of 9.54 μm, and they exhibited excellent stability during 28 days of storage. The morphological structures of the emulsions investigated by confocal laser scanning microscopy and scanning electron microscopy indicated that the CMCD-ODA Pickering emulsion obtained at pH 5.0 was stabilized by loading amphiphilic CMCD-ODA polymer around the spherical oil droplets and forming a weak gel network structure. The CEO-loaded CMCD-ODA emulsions had higher antioxidant capacity than free CEO after 28 days of storage at pH 5.0. Given the good emulsion stability, antioxidant activity, and great antibacterial effect, the CEO-loaded carboxymethyl curdlan Pickering emulsion has promising applications in food, cosmetic, and biomedicine industries.

Pickering Emulsion Stabilized by Tea Seed Cake Protein Nanoparticles as Lutein Carrier

To effectively deliver lutein, hydrothermally prepared tea seed cake protein nanoparticles (TSCPN) were used to fabricate Pickering emulsion, and the bioaccessibility of lutein encapsulated by Pickering emulsion and the conventional emulsion was evaluated in vitro. The results indicated that the average size and absolute value of zeta potential of TSCPN increased along with the increase in the protein concentration, and 2% protein concentration was adopted to prepare TSCPN. With the increase in the concentration of TSCPN, the size of Pickering emulsion decreased from 337.02 μm to 89.36 μm, and when the TSCPN concentration was greater than 0.6%, all emulsions exhibited good stability during the 14 days storage. Combined with the microstructure result, 1.2% TSCPN was used to stabilize Pickering emulsion. With the increase in ionic concentration (0-400 mM), the particle size of the emulsions increased while the absolute value of zeta potential decreased. TSCPN-based Pickering emulsion was superior to the conventional emulsion for both lutein encapsulation (96.6 ± 1.0% vs. 82.1 ± 1.4%) and bioaccessibility (56.0 ± 1.1% vs. 35.2 ± 1.2%). Thus, TSCPN-based Pickering emulsion in this study have the potential as an effective carrier for lutein.

The Potential Application of Pickering Multiple Emulsions in Food

Emulsions stabilized by adsorbed particles—Pickering particles (PPs) instead of surfactants and emulsifiers are called Pickering emulsions. Here, we review the possible uses of Pickering multiple emulsions (PMEs) in the food industry. Food-grade PMEs are very complex systems with high potential for application in food technology. They can be prepared by traditional two-step emulsification processes but also using complex techniques, e.g., microfluidic devices. Compared to those stabilized with an emulsifier, PMEs provide more benefits such as lower susceptibility to coalescence, possible encapsulation of functional compounds in PMEs or even PPs with controlled release, etc. Additionally, the PPs can be made from food-grade by-products. Naturally, w/o/w emulsions in the Pickering form can also provide benefits such as fat reduction by partial replacement of fat phase with internal water phase and encapsulation of sensitive compounds in the internal water phase. A possible advanced type of PMEs may be stabilized by Janus particles, which can change their physicochemical properties and control properties of the whole emulsion systems. These emulsions have big potential as biosensors. In this paper, recent advances in the application of PPs in food emulsions are highlighted with emphasis on the potential application in food-grade PMEs.

Potential use of Janus structures in food applications

Janus surfaces present technological opportunities both for research and industry in which different chemical, physical and/or structural components need to coexist for a single purpose such as chemistry, textile and material science. Varying inorganic and organic (polymer-based) materials are conventionally used however, utilizing nature-derived polymers to fabricate Janus structures is a recent and attractive trend which makes them more applicable for bio-based treatments with environmental concerns. Particularly, promising applications of Janus structures as being surfactants, drug delivery and micro/nano encapsulation vehicles for biomedical purposes successfully forward the interest on Janus concept to the food related practices. Producing Janus structures from nature-derived and food grade polymers such as alginate, cellulose, chitosan, lipid nanocrystals, zein and some plant-proteins and their usage stronger emulsions with higher stabilities, biosensing or antimicrobial practices as well as bioactive delivery and release control might be considered as a new era for food processing industry.

Pea protein composition, functionality, modification, and food applications: A review

The demand for proteins continues to increase due to their nutritional benefits, the growing world population, and rising protein deficiency. Plant-based proteins represent a sustainable source to supplement costly animal proteins. Pea (Pisum sativum L.) is one of the most produced plant legume crops in the world and contributes to 26% of the total pulse production. The average protein content of pea is about 20%-25%. The commercial utilization of pea proteins is limited, partially due to its less desirable functionalities and beany off-flavor. Protein modification may change these properties and broaden the application of pea proteins in the food industry. Functional properties such as protein solubility, water and oil holding capacity, emulsifying/foaming capacity and stability, and gelation can be altered and improved by enzymatic, chemical, and physical modifications. These modifications work by affecting protein chemical structures, hydrophobicity/hydrophilicity balance, and interactions with other food constituents. Modifiers, reaction conditions, and degree of modifications are critical variables for protein modifications and can be controlled to achieve desirable functional attributes that may meet applications in meat analogs, baking products, dressings, beverages, dairy mimics, encapsulation, and emulsions. Understanding pea protein characteristics will allow us to design better functional ingredients for food applications.

Removal of anti-nutritional factors of rapeseed protein isolate (RPI) and toxicity assessment of RPI

We prepared a detoxified rapeseed protein isolate (RPI) by phytase/ethanol treatment based on alkaline extraction and acidic precipitation.

Recent progress in Pickering emulsions stabilised by bioderived particles

In recent years, the demand for non-surfactant based Pickering emulsions in many industrial applications has grown significantly because of the option to select biodegradable and sustainable materials with low toxicity as emulsion stabilisers. Usually, emulsions are a dispersion system, where synthetic surfactants or macromolecules stabilise two immiscible phases (typically water and oil phases) to prevent coalescence. However, synthetic surfactants are not always a suitable choice in some applications, especially in pharmaceuticals, food and cosmetics, due to toxicity and lack of compatibility and biodegradability. Therefore, this review reports recent literature (2018-2021) on the use of comparatively safer biodegradable polysaccharide particles, proteins, lipids and combinations of these species in various Pickering emulsion formulations. Also, an overview of the various tuneable factors associated with the functionalisation or surface modification of these solid particles, that govern the stability of the Pickering emulsions is provided.

Recent Developments in the Formulation and Use of Polymers and Particles of Plant-based Origin for Emulsion Stabilizations

The main scope of this Review was the recent progress in the use of plant-based polymers and particles for the stabilization of Pickering and non-Pickering emulsion systems. Due to their availability and promising performance, it was discussed how the source, modification, and formulation of cellulose, starch, protein, and lignin-based polymers and particles would impact their emulsion stabilization. Special attention was given toward the material synthesis in two forms of polymeric surfactants and particles and the corresponding formulated emulsions. Also, the effects of particle size, degree of aggregation, wettability, degree of substitution, and electrical charge in stabilizing oil/water systems and micro- and macro-structures of oil droplets were discussed. The wide range of applications using such plant-based stabilizers in different technologies as well as their challenge and future perspectives were described.

Recent Innovations in Emulsion Science and Technology for Food Applications

Emulsion technology has been used for decades in the food industry to create a diverse range of products, including homogenized milk, creams, dips, dressings, sauces, desserts, and toppings. Recently, however, there have been important advances in emulsion science that are leading to new approaches to improving food quality and functionality. This article provides an overview of a number of these advanced emulsion technologies, including Pickering emulsions, high internal phase emulsions (HIPEs), nanoemulsions, and multiple emulsions. Pickering emulsions are stabilized by particle-based emulsifiers, which may be synthetic or natural, rather than conventional molecular emulsifiers. HIPEs are emulsions where the concentration of the disperse phase exceeds the close packing limit (usually >74%), which leads to novel textural properties and high resistance to gravitational separation. Nanoemulsions contain very small droplets (typically d < 200 nm), which leads to useful functional attributes, such as high optical clarity, resistance to gravitational separation and aggregation, rapid digestion, and high bioavailability. Multiple emulsions contain droplets that have smaller immiscible droplets inside them, which can be used for reduced-calorie, encapsulation, and delivery purposes. This new generation of advanced emulsions may lead to food and beverage products with improved quality, health, and sustainability.

Effect of glutamic acid on the preparation and characterization of Pickering emulsions stabilized by zein

In this study, glutamic acid and zein were utilized to prepare colloidal nanoparticles as stabilizers for Pickering emulsions. The effect of the ratio of glutamic acid to zein on the stability, zeta potential, particle size, morphology, and structure of colloidal nanoparticles was studied. The results showed that zein and glutamic acid combined in the form of noncovalent bonds, which changed the characteristics of the zein. In addition, colloidal particles aggregation was induced by glutamic acid, which altered the distribution of droplets in the emulsion, and increased the adsorption of proteins on the surface of the oil droplets, as reflected by the analysis of the size, microstructure, rheological behaviours, and driving force of the Pickering emulsion. Hydrophobic interactions and electrostatic interactions were the main driving forces for the formation of colloidal particles, which was determined by driving force analysis and the change of the zeta potential.

Cinnamon Cassia Oil Emulsions Stabilized by Chitin Nanofibrils: Physicochemical Properties and Antibacterial Activities

Nowadays consumers are increasingly demanding food with fewer synthetic preservatives, which makes antimicrobial essential oils (EOs) from plants promising alternatives. In this work, surfactant-free emulsions were successfully fabricated from Cinnamon cassia oil (C. cassia oil) with partially deacetylated chitin nanofiber (ChNF) adopted as a Pickering stabilizer. The storage stability and microstructures of the emulsions with different concentrations of ChNF were studied in detail. As ChNF concentration increased, the emulsion droplet size decreased while the emulsion stability increased with stable periods as long as 90 days. This could be attributed to the Pickering stabilization realized by irreversible adsorption of the ChNF at the oil-water interface (revealed by fluorescent microscopy) and subsequent formation of an interdroplet ChNF network in the continuous phase, which was further strengthened in the presence of the aldehyde moiety in the C. cassia oil (verified by FTIR spectra). The rheological data and SEM images provided further evidence for network formation in the emulsions with increased ChNF concentration. Furthermore, the antimicrobial activity of the emulsion against Escherichia coli and the release patterns of EOs from emulsions were also investigated. The emulsions showed prolonged antibacterial activities but enhanced diffusion efficiency with the introduction of ChNF, which turned out to be a good encapsulation system for the controlled release of EOs. This work evidences the promising advantages of ChNF-stabilized Pickering emulsions as a facile EOs delivery system for application in food preservation and related fields.

Canola/rapeseed protein - nutritional value, functionality and food application: a review

Plant-based diet and plant proteins specifically are predestined to meet nutritional requirements of growing population of humans and simultaneously reduce negative effects of food production on the environment. While searching for new sources of proteins, special emphasis should be placed on oilseeds of Brassica family comprising varieties of rapeseed and canola as they contain nutritionally valuable proteins, which have potential to be used in food, but are now rarely or not used as food components. The purpose of the present work is to provide a comprehensive review of main canola/rapeseed proteins: cruciferin and napin, with the focus on their nutritional and functional features, putting special emphasis on their possible applications in food. Technological challenges to obtain rapeseed protein products that are free from anti-nutritional factors are also addressed. As molecular structure of cruciferin and napin differs, they exhibit distinct features, such as solubility, emulsifying, foaming or gelling properties. Potential allergenic effect of 2S napin has to be taken under consideration. Overall, rapeseed proteins demonstrate beneficial nutritional value and functional properties and are deemed to play important roles both in food, as well as, non-food and non-feed applications.