Influence of Hydrolysis on the Bioactive Properties and Stability of Chickpea-Protein-Based O/W Emulsions

Performance of Azolla pinnata fern protein hydrolysates as an emulsifier and nutraceutical ingredient in an O/W emulsion system and their effect on human gut microbiota and mammalian cells

This study investigated the dual potential of Azolla pinnata fern protein hydrolysates (AFPHs) as functional and nutraceutical ingredients in an oil/water emulsion system. The AFPH-stabilised emulsion (AFPH-E) displayed a small and uniform droplet distribution and was stable to aggregation and creaming over a wide range of pH (5-8), salt concentrations ≤ 100 mM, and heat treatment ≤ 70 °C. Besides, the AFPH-E possessed and maintained strong biological activities, including antihypertensive, antidiabetic, and antioxidant, under different food processing conditions (pH 5-8; NaCl: 50-150 mM, and heat treatment: 30-100 °C). Following in vitro gastrointestinal digestion, the antihypertensive and antioxidant activities were unchanged, while a notable increase of 8% was observed for DPPH. However, the antidiabetic activities were partially reduced in the range of 5-11%. Notably, AFPH-E modulated the gut microbiota and short-chain fatty acids (SCFAs), promoting the growth of beneficial bacteria, particularly Bifidobacteria and Lactobacilli, along with increased SCFA acetate, propionate, and butyrate. Also, AFPH-E up to 10 mg mL-1 did not affect the proliferation of the normal colon cells. In the current work, AFPH demonstrated dual functionality as a plant-based emulsifier with strong biological activities in an oil/water emulsion system and promoted healthy changes in the human gut microbiota.

Unraveling the effect of combined heat and high-pressure homogenization treatment on the improvement of chickpea protein solubility from the perspectives of colloidal state change and structural characteristic modification

Chickpea protein (CP) is a promising plant protein ingredient, but the poor solubility has limited its broad application. In this study, heating followed by high-pressure homogenization (HPH) was used to improve the solubility of CP. The results showed that combined heat (80℃, 30 min) and HPH (80 MPa, 2 cycles) treatment exhibited an additive effect in improving the solubility of CP. This improvement could be attributed to the dissociation and the rearrangement of large insoluble protein aggregates into small-sized soluble protein aggregates, the increased exposure of hydrophobic residues and reactive sulfhydryl groups, the transformation of α-helices to β-sheets and β-turns. Moreover, the 11S subunits of CP could form reinforced disulfide covalent cross-links under heating + HPH, which may provide steric hindrance preventing the reassembly of large protein bodies. This work proposes an interesting approach to enhance the physicochemical properties of CP for tailoring techno-functional plant protein ingredients in food formulations.

Effects of ultrasonic and steam-cooking treatments on the physicochemical properties of bamboo shoots protein and the stability of O/W emulsion

In this study, the effects of ultrasonic and steam-cooking treatments on the physicochemical and emulsifying properties of bamboo shoots protein (BSP) were investigated. The particle size and the polydispersity index (PDI) of U-BSP (ultrasonic-BSP) both decreased. Fourier transform infrared spectroscopy (FTIR) showed that the secondary structure of U-BSP was more loose. Furthermore, X-ray diffraction (XRD) and thermogravimetric (TGA) analysis suggested that crystallinity amd thermal stability of U-BSP both deceased. The water and oil holding capacity (WHC/OHC) of U-BSP increased, while steam-cooking treatment had the reverse effect. We also investigated the effects of ultrasonic and steam-cooking treatments on BSP-stabilized emulsions. The viscosity of emulsion stabilized by U-BSP increased and the distribution of emulsion droplets was more uniform and smaller. The results showed that ultrasonic treatment significantly improved the stability of BSP-stabilized emulsions, while steam-cooking treatment had a significant negative impact on the stability of BSP-stabilized emulsions. The work indicated ultrasonication is an effective treatment to improve the emulsifying properties of BSP.

Effects of enzymatic modification on the stability of cashew-based milk

The green and low-carbon awareness drives the consumption demand for "clean-label" plant-based milk, which is limited by its physicochemical stability. Herein, the effects of enzymatic hydrolysis on the stability of cashew-based milk (CM) are explored in detail. Our results showed that a maximum protein solubility of 41.36 ± 2.14% was achieved under bromelain treatment of CM either for 60 min or with the addition of 600 U g-1. Under these hydrolysis conditions, CM showed smaller particle size, larger zeta potential, and more uniform size distribution in comparison with the control. Similar behavior was also observed in the apparent viscosity and macroscopic stability, demonstrating the fortification of moderate hydrolysis on the physical stability of CM. Interestingly, bromelain hydrolysis could favor improving the oxidative stability of CM, for which the peroxide value and thiobarbituric acid reactive substances were decreased by 90% and 60%, respectively, after 14 days of storage in comparison with the control. The correlation analysis confirmed that the physical and oxidative stability was highly associated with protein solubility and secondary structures like α-helix. Therefore, our findings could provide scientific support for developing plant-based milk with fortified physicochemical stability.

Effects of proteins on emulsion stability: The role of proteins at the oil-water interface

To obtain a stable protein-added emulsion system, researchers have focused on the design of the oil-water interface. This review discussed the updated details of protein adsorption behavior at the oil-water interface. We evaluated methods of monitoring interfacial proteins as well as their strengths and limitations. Based on the effects of structure on protein adsorption, we summarized the contribution of pre-changing methods to adsorption. In addition, the interaction of proteins and other surface-active molecules at the interface had been emphasized. Results showed that protein adsorption is affected by conformation, oil polarity and aqueous environments. The monitoring of interfacial proteins through spectroscopic properties in actual emulsion systems is an emerging trend. Pre-changing could improve the protein adsorption and the purpose of pre-changing of proteins is similar. In the interaction with other surface-active molecules, co-adsorption is desirable. By co-adsorption, the respective advantages can be exploited to obtain a more stable emulsion system.

Structure and in vitro bioactive properties of O/W emulsions generated with fava bean protein hydrolysates

The use of plant-derived proteins in the generation of food products is gaining popularity as an alternative to proteins of animal origin. This study described the emulsifying and bioactive properties of fava bean protein hydrolysates (FBH) generated at low and high degree of hydrolysis (DH), i.e., FBH₈ (low DH: 8.4 ± 0.3) and FBH₂₁₀ (high DH: 15.6 ± 0.7) when adjusted to three different pHs (3.0, 5.0 and 8.0). Overall, FBH₈, had more favourable emulsifying properties compared to the FBH_210. The emulsion generated with FBH₈ at pH 8.0 also had the highest antioxidant activity when measured by the oxygen radical absorbance capacity (ORAC) and ferric reducing antioxidant power (FRAP) assays with values of 1108.6 ± 3.8 and 1159.9 ± 20.5 μmol Trolox Eq·g^-1 emulsion, respectively. The antioxidant activity of the emulsions, in most cases, remained unchanged following in vitro simulated gastrointestinal digestion. Both the FBH₈ and FBH₂₁₀ emulsions following in vitro simulated gastrointestinal digestion were able to inhibit the activities of dipeptidyl peptidase-IV (DPP-IV) and angiotensin converting enzyme (ACE) with ∼45% and 65% inhibition, respectively. These results indicated that hydrolysates from fava bean may find use for the generation of bioactive emulsions.

Characterization of a novel lipase from Bacillus licheniformis NCU CS-5 for applications in detergent industry and biodegradation of 2,4-D butyl ester

Enzymatic degradation has become the most promising approach to degrading organic ester compounds. In this study, Bacillus licheniformis NCU CS-5 was isolated from the spoilage of Cinnamomum camphora seed kernel, and its extracellular lipase was purified, with a specific activity of 192.98 U/mg. The lipase was found to be a trimeric protein as it showed a single band of 27 kDa in SDS-PAGE and 81 kDa in Native-PAGE. It was active in a wide range of temperatures (5-55 °C) and pH values (6.0-9.0), and the optimal temperature and pH value were 40 °C and 8.0, respectively. The enzyme was active in the presence of various organic solvents, metal ions, inhibitors and surfactants. Both crude and purified lipase retained more than 80% activity after 5 h in the presence of commercial detergents, suggesting its great application potential in detergent industry. The highest activity was found to be towards medium- and long-chain fatty acids (C₆-C₁₈). Peptide mass spectrometric analysis of the purified lipase showed similarity to the lipase family of B. licheniformis. Furthermore, it degraded more than 90% 2,4-D butyl ester to its hydrolysate 2,4-D within 24 h, indicating that the novel lipase may be applied to degrade organic ester pesticides.