Conformational Changes of Whey and Pea Proteins upon Emulsification Approached by Front-Surface Fluorescence

Insights into the impact of complex phosphates on acid-induced milk fan gel properties: Texture, rheological, microstructure, and molecular forces

Milk fan cheese, a type of stretched -cheese, presents challenges in its stretch-forming. This study investigated the impacts of complex phosphates (sodium tripolyphosphate and sodium dihydrogen phosphate, STPP-DSP) on the gelling properties of acid-induced milk fan gel and the mechanisms contributing to its stretch-forming. The treatment of milk fan gel with STPP-DSP resulted in improved functional and textural properties compared with the control group. In particular, drawing length increased significantly from 69.67 nm to 80.33 nm, and adhesiveness increased from 1737.89 g/mm to 1969.79 g/mm. The addition of STPP-DSP also led to increased viscosity, elastic modulus (G'), and viscous modulus (G"). Microstructural analysis revealed the formation of a fibrous structure within the gel after STPP-DSP treatment, facilitating uniform embedding of fat globules and emulsification. Structural analysis showed that the addition of STPP-DSP increased β-fold and decreased random coiling of the gel, facilitating the unfolding of protein structures. Additionally, UV absorption spectroscopy and excitation-emission matrix spectroscopy results indicated the formation of a chelate between STPP-DSP and milk fan gel, increasing protein-protein molecular interactions. Evidence from differential scanning calorimetry and x-ray diffraction demonstrated the formation of sodium caseinate chelate. Fourier transform infrared spectroscopy and zeta potential analysis revealed that the sodium caseinate chelate formed through hydrophobicity, hydrogen bonding, and electrostatic forces. These findings provided theoretical insights into how phosphates can improve the stretch-forming of milk fan gel, facilitating the application of phosphate additives in stretched -cheese processing.

Effect of Nonprotein Components for Lipid Oxidation in Emulsions Stabilized by Plant Protein Extracts

Plant protein ingredients are rich in non-protein components of which the antioxidant and pro-oxidant effects are expected to be considerable. In this paper, commercial soy and pea protein isolates and concentrates were selected by using their soluble fractions to prepare oil-in-water (O/W) emulsions. Emulsions stabilized with soy protein isolates were more prone to lipid oxidation than those with soy protein concentrate or pea protein isolate. Compositional analysis revealed that the soluble fraction of soy protein isolates contained higher concentrations of phenolic compounds and metals (iron and copper) but lower mineral and ash contents than those of soy protein concentrate and pea protein isolate. Correlating the composition to oxidation in emulsions highlighted the significant role of non-protein components, alongside the protein's oxidative state. These findings are relevant for the use of alternative proteins in food formulation, a practice often promoted as sustainable yet that may come with repercussions for oxidative stability.

Role of the pea protein aggregation state on their interfacial properties

HYPOTHESIS

Plant protein ingredients from similar sources can vary in functionality not only because of compositional differences, but also because of differences in their structure depending on their processing history. It is essential to understand these distinctions to develop novel food emulsion using plant proteins. It is hypothesized that differing interfacial properties can be attributed to their structures, aggregation, and colloidal states.

EXPERIMENTS

The adsorption behavior of a commercial protein isolate, homogenized or non-homogenized, was compared to a mildly extracted isolate to evaluate the effect of aggregation state and structural differences. After characterization of the particle size and protein composition, the interfacial properties were compared.

FINDINGS

Atomic force microscopy provided evidence of interfaces packed with protein oligomers regardless of the treatment. Differences in adsorption kinetics and interfacial shear rheology depending on oil polarity suggested different interfacial structures. A polydisperse mixture of protein oligomers resulted in increased rearrangements and protein-protein interactions at the interface. Homogenization of commercial proteins resulted in a lower interfacial tension and less elastic interfaces compared to those of native proteins due to the presence of larger aggregates. This study highlights how the interfacial properties can be related to the protein aggregation state resulting from differences in processing history.

Fabrication and stability of W/O/W emulsions stabilized by gum arabic and polyglycerol polyricinoleate

BACKGROUND

In order to study the effect of adsorption of surfactant at the two interfacial layers on emulsion stability, the kinetically stable water-in-oil-in-water (W/O/W) emulsion carriers were prepared using polyglycerol polyricinoleate (PGPR) and gum arabic (GA) as emulsifiers. The relationship between the adsorption of the surfactant and the stability mechanism of the emulsions was elucidated.

RESULTS

When the contents of PGPR and GA were low, the interfaces between oil and the inner and outer water phases, respectively, could not be completely covered. However, when the concentration of PGPR was higher than 60 g kg-1 , the excess PGPR was adsorbed on the interface between the oil phase and the outer water phase. When the concentration of GA reached 80 g kg-1 , more GA was adsorbed to the oil-in-water interface. Moreover, the presence of PGPR on the interface could reduce the adsorption capacity of GA. Two types of kinetically stable emulsions were obtained by optimizing the interface composition (60 g kg-1 GA/80 g kg-1 PGPR and 60 g kg-1 PGPR/80 g kg-1 GA). The kinetically stable W/O/W emulsions prepared in this study were successfully used to encapsulate a hydrophilic vitamin (vitamin B12) with an encapsulation efficiency (EE) of 80% and release efficiency (RE) of 95%. The interfacial adsorption GA can accelerate the hydrolysis of fat.

CONCLUSION

Overall, this study provides a new strategy for the preparation of W/O/W emulsions, which might be beneficial for application in food, cosmetic, chemical, and pharmaceutical industries. © 2023 Society of Chemical Industry.

Impact of pH on pea protein-hydroxypropyl starch hydrogel based on interpenetrating network and its application in 3D-printing

Improving the mechanical and 3D printing performance of pea protein (PeaP) hydrogels contributes to the development of innovative plant-based gel products. Herein, we proposed a strategy for constructing PeaP-hydroxypropyl starch (HPS) interpenetrating network hydrogels, in which the structure, strength, and 3D printing properties of the hydrogels were regulated by changing pH. Results showed that pH significantly affected the gelation process of PeaP/HPS hydrogels. The hydrogels formed a lamellar structure at pH 3, a granule aggregation network structure at pH 5, porous structures at pH 7 and 9, and a honeycomb structure at pH 11. The strength of hydrogels formed at different pH values had the following order: pH 3 ＞pH 11 ＞ pH 7 ＞pH 9 ＞pH 5. The storage modulus (G') of the hydrogel at pH 3 was up to 4149 Pa, but only 695 Pa at pH 5. Moreover, hydrogel at pH 3 had the best self-recovery of 55%. 3D printed objects from gel inks at pH 3 exhibited high structural integrity and fidelity at 60 °C. Gelling force analysis indicated hydrogen bonds were the dominant interaction within all hydrogels. Overall, this study suggested that PeaP/HPS hydrogel formed at pH 3 possessed the most excellent mechanical properties and 3D printing capabilities, which may provide insights into the development of novel PeaP-based gel food ingredients and promote the application of PeaP in the food industry.

Effects of divalent mercury on myosin structure of large yellow croaker and its binding mechanism: Multi-spectroscopies and molecular docking

Heavy metals have long biological half-lives and are therefore a major threat to aquatic organisms, especially fish. Divalent mercury (Hg(II)) is an important form from a toxicological viewpoint. In this paper, we studied the interaction mechanism between large yellow croaker myosin and Hg(II) by multi-spectroscopies and molecular docking. Hg(II) had a positive effect on improving the elasticity of myosin gel, and the constant increase of charge would destroy the gel. Hg(II) caused myosin to aggregate, and the protein's apparent structure rapidly increased in length. The content of α-helix obviously decreased, β-turns and β-sheet increased. The myosin and Hg(II) quenching type was static quenching. Thermodynamic analysis suggested hydrogen bonding and van der Waals forces were the main forces for the combination. The molecular docking further confirmed the mechanism of action. This study provides a theoretical guidance for the preventions and control of marine heavy metals.

Correlation between interfacial layer properties and physical stability of food emulsions: current trends, challenges, strategies, and further perspectives

Emulsions are thermodynamically unstable systems that tend to separate into two immiscible phases over time. The interfacial layer formed by the emulsifiers adsorbed at the oil-water interface plays an important role in the emulsion stability. The interfacial layer properties of emulsion droplets have been considered the cutting-in points that influence emulsion stability, a traditional motif of physical chemistry and colloid chemistry of particular significance in relation to the food science and technology sector. Although many attempts have shown that high interfacial viscoelasticity may contribute to long-term emulsion stability, a universal relationship for all cases between the interfacial layer features at the microscopic scale and the bulk physical stability of the emulsion at the macroscopic scale remains to be established. Not only that, but integrating the cognition from different scales of emulsions and establishing a unified single model to fill the gap in awareness between scales also remain challenging. In this review, we present a comprehensive overview of recent progress in the general science of emulsion stability with a peculiar focus on interfacial layer characteristics in relation to the formation and stabilization of food emulsions, where the natural origin and edible safety of emulsifiers and stabilizers are highly requested. This review begins with a general overview of the construction and destruction of interfacial layers in emulsions to highlight the most important physicochemical characteristics of interfacial layers (formation kinetics, surface load, interactions among adsorbed emulsifiers, thickness and structure, and shear and dilatational rheology), and their roles in controlling emulsion stability. Subsequently, the structural effects of a series of typically dietary emulsifiers (small-molecule surfactants,proteins, polysaccharides, protein-polysaccharide complexes, and particles) on oil-water interfaces in food emulsions are emphasized. Finally, the main protocols developed for modifying the structural characteristics of adsorbed emulsifiers at multiple scales and improving the stability of emulsions are highlighted. Overall, this paper aims to comprehensively study the literature findings in the past decade and find out the commonality of multi-scale structures of emulsifiers, so as to deeply understand the common characteristics and emulsification stability behaviour of adsorption emulsifiers with different interfacial layer structures. It is difficult to say that there has been significant progress in the underlying principles and technologies in the general science of emulsion stability over the last decade or two. However, the correlation between interfacial layer properties and physical stability of food emulsions promotes revealing the role of interfacial rheological properties in emulsion stability, providing guidance on controlling the bulk properties by tuning the interfacial layer functionality.

Optimization of Pea Protein Isolate-Stabilized Oil-in-Water Ultra-Nanoemulsions by Response Surface Methodology and the Effect of Electrolytes on Optimized Nanoemulsions

Nanoemulsions are optically transparent and offer good stability, bioavailability, and control over the targeted delivery and release of lipophilic active components. In this study, pea protein isolate (PPI)-stabilized O/W nanoemulsions were evaluated using response surface methodology to obtain optimized ultra-nanoemulsions of Sauter mean diameter (D3,2) < 100 nm using a high-pressure homogenizer (HPH). Furthermore, the effect of food matrix electrolytes, i.e., the pH and ionic strength, on the emulsion (prepared at optimized conditions) was investigated. The results revealed that the droplet size distribution of emulsions was mainly influenced by the PPI concentration and the interaction of oil concentration and HPH pressure. Moreover, a non-significant increase in droplet size was observed when the nanoemulsions (having an initial D3,2 < 100 nm) were stored at 4 °C for 7 days. Based on the current experimental design, nanoemulsions with a droplet size < 100 nm can effectively be prepared with a high PPI concentration (6.35%), with less oil (1.95%), and at high HPH pressure (46.82 MPa). Such emulsions were capable of maintaining a droplet size below 100 nm even at ionic conditions of up to 400 mM NaCl and at acidic pH.

Effect of Mixed Particulate Emulsifiers on Spray-Dried Avocado Oil-in-Water Pickering Emulsions

Avocado oil is a very valuable agro-industrial product which can be perishable in a short time if it is not stored in the right conditions. The encapsulation of the oils through the spray drying technique protects them from oxidation and facilitates their incorporation into different pharmaceutical products and food matrices; however, the selection of environmentally friendly emulsifiers is a great challenge. Four formulations of the following solid particles: Gum Arabic, HI-CAP^®100 starch, and phosphorylated waxy maize starch, were selected to prepare avocado oil Pickering emulsions. Two of the formulations have the same composition, but one of them was emulsified by rotor-stator homogenization. The rest of the emulsions were emulsified by combining rotor-stator plus ultrasound methods. The protective effect of mixed particle emulsifiers in avocado oil encapsulated by spray drying was based on the efficiency of encapsulation. The best results were achieved when avocado oil was emulsified with a mixture of phosphorylated starch/HI-CAP^®100, where it presented the highest encapsulation efficiency.

Effects of proteins on emulsion stability: The role of proteins at the oil-water interface

To obtain a stable protein-added emulsion system, researchers have focused on the design of the oil-water interface. This review discussed the updated details of protein adsorption behavior at the oil-water interface. We evaluated methods of monitoring interfacial proteins as well as their strengths and limitations. Based on the effects of structure on protein adsorption, we summarized the contribution of pre-changing methods to adsorption. In addition, the interaction of proteins and other surface-active molecules at the interface had been emphasized. Results showed that protein adsorption is affected by conformation, oil polarity and aqueous environments. The monitoring of interfacial proteins through spectroscopic properties in actual emulsion systems is an emerging trend. Pre-changing could improve the protein adsorption and the purpose of pre-changing of proteins is similar. In the interaction with other surface-active molecules, co-adsorption is desirable. By co-adsorption, the respective advantages can be exploited to obtain a more stable emulsion system.

Vascular Endothelial Growth Factor Receptor, fms-Like Tyrosine Kinase-1 (Flt-1), as a Novel Binding Partner for SARS-CoV-2 Spike Receptor-Binding Domain

Angiotensin-converting enzyme 2 (ACE2) and neuropilin 1, a vascular endothelial growth factor (VEGF) receptor, were identified to bind to the SARS-CoV-2 spike receptor-binding domain (spike RBD). In silico analysis based on 3D structure, multiple sequence alignment, and molecular docking of second domain of soluble Flt-1 (sFlt-1) and spike RBD revealed structural similarities, sequence homology, and protein-protein interaction. Interaction and binding of recombinant spike RBD (rspike RBD) and recombinant sFlt-1 (rsFlt-1) in vitro induced a conformational change, as revealed by spectrofluorimetric data, with increased fluorescence intensity in emission spectra as compared to either of the proteins alone. Results on ELISA confirmed the binding and cross-reactivity of rspike-RBD and rsFlt-1 as determined by using either specific antibodies towards each protein or immunized human serum. We found that polyclonal or monoclonal anti-spike RBD antibodies can recognize either rsFlt-1 or rspike RBD, showing cross-reactivity for the two proteins in a dose-dependent binding response. Recognition of bound rspike RBD or rsFlt-1 by anti-Flt-1 or anti-spike RBD antibodies, respectively, as observed by immunoblotting, further confirmed interaction between the two proteins. Immunoprecipitation and immunoblot analysis demonstrated the identification of rspike RBD binding to the Flt-1 receptor on A549 cells. Further, the binding of rspike RBD to Flt-1 receptor was shown using immunofluorescence on 2D-culture or 3D-spheroid of MDA-MB-231 cells, which over-express Flt-1 receptor. Together, our study concludes that the Flt-1 receptor is a novel binding partner for SARS-CoV-2 spike RBD.

Interfacial protein-protein displacement at fluid interfaces

Protein blends are used to stabilise many traditional and emerging emulsion products, resulting in complex, non-equilibrated interfacial structures. The interface composition just after emulsification is dependent on the competitive adsorption between proteins. Over time, non-adsorbed proteins are capable of displacing the initially adsorbed ones. Such rearrangements are important to consider, since the integrity of the interfacial film could be compromised after partial displacement, which may result in the physical destabilisation of emulsions. In the present review, we critically describe various experimental techniques to assess the interfacial composition, properties and mechanisms of protein displacement. The type of information that can be obtained from the different techniques is described, from which we comment on their suitability for displacement studies. Comparative studies between model interfaces and emulsions allow for evaluating the impact of minor components and the different fluid dynamics during interface formation. We extensively discuss available mechanistic physical models that describe interfacial properties and the dynamics of complex mixed systems, with a focus on protein in-plane and bulk-interface interactions. The potential of Brownian dynamic simulations to describe the parameters that govern interfacial displacement is also addressed. This review thus provides ample information for characterising the interfacial properties over time in protein blend-stabilised emulsions, based on both experimental and modelling approaches.

The Effect of Glycosylated Soy Protein Isolate on the Stability of Lutein and Their Interaction Characteristics

Lutein is a natural fat-soluble carotenoid with various physiological functions. However, its poor water solubility and stability restrict its application in functional foods. The present study sought to analyze the stability and interaction mechanism of the complex glycosylated soy protein isolate (SPI) prepared using SPI and inulin-type fructans and lutein. The results showed that glycosylation reduced the fluorescence intensity and surface hydrophobicity of SPI but improved the emulsification process and solubility. Fluorescence intensity and ultraviolet–visible (UV–Vis) absorption spectroscopy results showed that the fluorescence quenching of the glycosylated soybean protein isolate by lutein was static. Through thermodynamic parameter analysis, it was found that lutein and glycosylated SPI were bound spontaneously through hydrophobic interaction, and the binding stoichiometry was 1:1. The X-ray diffraction analysis results showed that lutein existed in the glycosylated soybean protein isolate in an amorphous form. The Fourier transform infrared spectroscopy analysis results revealed that lutein had no effect on the secondary structure of glycosylated soy protein isolate. Meanwhile, the combination of lutein and glycosylated SPI improved the water solubility of lutein and the stability of light and heat.

Proposed Methods for Testing and Comparing the Emulsifying Properties of Proteins from Animal, Plant, and Alternative Sources

The food industry is trying to reformulate many of its products to replace functional ingredients that are chemically synthesized or isolated from animal sources (such as meat, fish, eggs, or milk) with ingredients derived from plant or microbial sources. This effort is largely a result of the demand for foods that are better for the environment, human health, and animal welfare. Many new kinds of plant- or microbial-derived proteins are being isolated for potential utilization as functional ingredients by the food industry. A major challenge in this area is the lack of standardized methods to measure and compare the functional performance of proteins under conditions they might be used in food applications. This information is required to select the most appropriate protein for each application. In this article, we discuss the physicochemical principles of emulsifier functionality and then present a series of analytical tests that can be used to quantify the ability of proteins to form and stabilize emulsions. These tests include methods for characterizing the effectiveness of the proteins to promote the formation and stability of the small droplets generated during homogenization, as well as their ability to stabilize the droplets against aggregation under different conditions (e.g., pH, ionic composition, temperature, and shearing). This information should be useful to the food industry when it is trying to identify alternative proteins to replace existing emulsifiers in specific food applications.

Non-covalent interaction between pea protein isolate and catechin: effects on protein structure and functional properties

The aim of this study was to investigate the effects of non-covalent interaction between pea protein isolate (PPI) and different concentrations (0.05–0.25%, w/v) of catechin (CT) on the structural and functional characteristics of protein.