Hapten-Grafted Programmed Probe as a Corecognition Element for a Competitive Immunosensor to Detect Acetamiprid Residue in Agricultural Products

Advancements in the preparation technology of small molecule artificial antigens and their specific antibodies: a comprehensive review

Small molecules find extensive application in medicine, food safety, and environmental studies, particularly in biomedicine. Immunoassay technology, leveraging the specific recognition between antigens and antibodies, offers a superior alternative to traditional physical and chemical analysis methods. This approach allows for the rapid and accurate detection of small molecular compounds, owing to its high sensitivity, specificity, and swift analytical capabilities. However, small molecular compounds often struggle to effectively stimulate an immune response due to their low molecular weight, weak antigenicity, and limited antigenic epitopes. To overcome this, coupling small molecule compounds with macromolecular carriers to form complete antigens is typically required to induce specific antibodies in animals. Consequently, the preparation of small-molecule artificial antigens and the production of efficient specific antibodies are crucial for achieving precise immunoassays. This paper reviews recent advancements in small molecule antibody preparation technology, emphasizing the design and synthesis of haptens, the coupling of haptens with carriers, the purification and identification of artificial antigens, and the preparation of specific antibodies. Additionally, it evaluates the current technological shortcomings and limitations while projecting future trends in artificial antigen synthesis and antibody preparation technology.

Electrochemical sensing mechanisms of neonicotinoid pesticides and recent progress in utilizing functional materials for electrochemical detection platforms

The excessive residue of neonicotinoid pesticides in the environment and food poses a severe threat to human health, necessitating the urgent development of a sensitive and efficient method for detecting trace amounts of these pesticides. Electrochemical sensors, characterized by their simplicity of operation, rapid response, low cost, strong selectivity, and high feasibility, have garnered significant attention for their immense potential in swiftly detecting trace target molecules. The detection capability of electrochemical sensors primarily relies on the catalytic activity of electrode materials towards the target analyte, efficient loading of biomolecular functionalities, and the effective conversion of interactions between the target analyte and its receptor into electrical signals. Electrode materials with superior performance play a crucial role in enhancing the detection capability of electrochemical sensors. With the continuous advancement of nanotechnology, particularly the widespread application of novel functional materials, there is paramount significance in broadening the applicability and expanding the detection range of pesticide sensors. This comprehensive review encapsulates the electrochemical detection mechanisms of neonicotinoid pesticides, providing detailed insights into the outstanding roles, advantages, and limitations of functional materials such as carbon-based materials, metal-organic framework materials, supramolecular materials, metal-based nanomaterials, as well as molecular imprinted materials, antibodies/antigens, and aptamers as molecular recognition elements in the construction of electrochemical sensors for neonicotinoid pesticides. Furthermore, prospects and challenges facing various electrochemical sensors based on functional materials for neonicotinoid pesticides are discussed, providing valuable insights for the future development and application of biosensors for simplified on-site detection of agricultural residues.

Electrochemical Impedimetric Platform Based on Con A@MIL-101 for Glycoprotein Detection

An electrochemical impedimetric biosensing platform with lectin as a molecular recognition element has been established for the sensitive detection of glycoproteins, a class of important biomarkers in clinical diagnosis. One of the representative metal-organic framework materials, MIL-101(Cr)-NH2, was utilized as the supporting matrix, and its amino groups served as the anchors to immobilize the lectins of concanavalin A (Con A), constituting Con A@MIL-101(Cr)-NH2 for the determination of invertase (INV) as a model glycoprotein. The Con A concentration, immobilization time, and incubation time with INV were optimized. Under the optimal conditions, the degree of impedance increase was linearly proportional to the logarithm of INV concentration between 1.0 × 10-16 and 1.0 × 10-11 M, affording a limit of detection as low as 3.98 × 10-18 M. Good specificity, stability, reproducibility, and repeatability were demonstrated for the fabricated biosensing platform. Moreover, real mouse serum samples were spiked with different concentrations of INV. Excellent recoveries were obtained, which demonstrated the biosensing platform's capability of analyzing glycoproteins within a complex matrix.

In-situ quantitative prediction of pesticide residues on plant surface by ATR-FTIR technique coupled with chemometrics

Pesticide residues on plant surfaces pose a severe threat to food security, yet most research has focused on monitoring the liquid matrix, with few reports conducting in-situ analysis of the residues. This study was the first to attempt to utilize portable attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) for in-situ characterization of broad-spectrum fungicide boscalid residues on plant surfaces. ATR-FTIR scanning of tomato fruits with pre-determined concentrations of boscalid residues was conducted without any pre-treatment, and the obtained spectra were then processed using chemometrics methods. The results demonstrated a negative correlation between the residual concentrations and their corresponding absorption intensities of several well-resolved peaks from the spectra, resulting in a high accuracy of 93.33% for the classification model created by probabilistic neural network (PNN) coupled with principal component analysis (PCA). By employing correlation analysis and the interval partial least squares method (iPLS), quantitative analysis was conducted on the wavenumber ranges of 1000-1800 cm-1 and 2700-2900 cm-1 from the spectra. The regression model, established through partial least squares regression (PLSR), demonstrated exceptional performance with an R2 value of 0.80, RMSE of 1.02 μg/cm2, RPD of 2.0, and RPIQ of 2.1 for validation. Meanwhile, the detection limit (LOD) of the model was calculated as 3.06 μg/cm2. This report highlights the potential of using portable ATR-FTIR for conducting qualitative and quantitative monitoring of pesticide residues both in-situ and on-site. It also provides references for other measuring techniques.

Electrochemical sensors of neonicotinoid insecticides residues in food samples: From structure to analysis

Most food samples are detected positive for neonicotinoid insecticides, posing a severe threat to human health. Electrochemical sensors have been proven effective for monitoring the residues to guarantee food safety, but there needs to be more review to conclude the development status comprehensively. On the other hand, various modified materials were emphasized to improve the performance of electrochemical sensors in relevant reviews, rather than the reasons why they were selected. Therefore, this paper reviewed the electrochemical sensors of neonicotinoid insecticides according to bases and strategies. The fundamental basis is the molecular structure of neonicotinoid insecticides, which was disassembled into four functional groups: nitro group, saturated nitrogen ring system, aromatic heterocycle and chlorine substituent. Their relationships were established with strategies including direct sensing, enzyme sensors, aptasensors, immunosensors, and sample pretreatment, respectively. It is hoped to provide a reference for the effective design of electrochemical sensors for small molecule compounds.

Electrochemical Sensing of Neonicotinoids Using Laser-Induced Graphene

Neonicotinoids are the fastest-growing insecticide accounting for over 25% of the global pesticide market and are capable of controlling a range of pests that damage croplands, home yards/gardens, and golf course greens. However, widespread use has led to nontarget organism decline in pollinators, insects, and birds, while chronic, sublethal effects on humans are still largely unknown. Therefore, there is a need to understand how prevalent neonicotinoids are in the environment as there are currently no commercially available field-deployable sensors capable of measuring neonicotinoid concentrations in surface waters. Herein, we report the first example of a laser-induced graphene (LIG) platform that utilizes electrochemical sensing for neonicotinoid detection. These graphene-based sensors are created through a scalable direct-write laser fabrication process that converts polyimide into LIG, which eliminates the need for chemical synthesis of graphene, ink formulation, masks, stencils, pattern rolls, and postprint annealing commonly associated with other printed graphene sensors. The LIG electrodes were capable of monitoring four major neonicotinoids (CLO, IMD, TMX, and DNT) with low detection limits (CLO, 823 nM; IMD, 384 nM; TMX, 338 nM; and DNT, 682 nM) and a rapid response time (∼10 s) using square-wave voltammetry without chemical/biological functionalization. Interference testing exhibited negligible responses from widely used pesticides including the broad-leaf insecticides parathion, paraoxon, and fipronil, as well as systemic herbicides glyphosate (roundup), atrazine, dicamba, and 2,4-dichlorophenoxyacetic acid. These scalable, graphene-based sensors have the potential for wide-scale mapping of neonicotinoids in watersheds and potential use in numerous electrochemical sensor devices.

In situ and rapid determination of acetamiprid residue on cabbage leaf using surface-enhanced Raman scattering

BACKGROUND

Pesticide residues in agricultural products and foods pose a serious threat to human health, and therefore a simple, rapid and direct method is urgently needed for pesticide residue detection. In addition to realizing the detection of acetamiprid in cabbage extract solution, the main target of this study was to establish an in situ surface-enhanced Raman scattering (SERS) method, which could directly detect acetamiprid residue on cabbage leaf without the need for extraction. Acetamiprid was first used to contaminate the surface of fresh cabbage leaf, and then bimetallic silver-coated gold nanoparticles (Au@AgNPs) were added on the contaminated spots and dried for SERS measurement.

RESULTS

Results suggested that acetamiprid can be detected in cabbage extract and on cabbage leaf surface in situ using the SERS method based on the Au@AgNPs substrate. The limit of detection was 0.08 μg mL^-1 in cabbage extract and 0.14 mg kg^-1 on cabbage leaf, the recovery ranged from 80.5% to 105.5% and the relative standard deviation was in the range 4.37-10.63%.

CONCLUSIONS

The proposed SERS method provides an in situ, nondestructive and rapid way to detect acetamiprid residue on the surface of fruits and vegetables, which could serve as an auxiliary approach for early screening of contaminated produce in field or on site in the future. © 2020 Society of Chemical Industry.

A syringe-aided apta-nanosensing method for colorimetric determination of acetamiprid

A syringe-aided apta-nanosensing method is reported for the colorimetric determination of acetamiprid. The method employs double-stranded (ds) DNA-conjugated gold nanoparticle@magnetic agarose beads, i.e., dsDNA-AuNP@MABs as peroxidase-mimicking composite probes, in which the aptamer is indirectly attached to the AuNP surface through its hybridization with complementary DNA (cDNA). Upon contact with the acetamiprid target, the probes can give perceptible color change due to the possible conformation switch from dsDNA's brush-like to cDNA's 'pancake' regime. An "air-spaced pumping" procedure using a syringe equipped with ring magnets as the operation platform was proposed to facilitate the magnetic separation of the sensing probes. Therefore, the analytical steps can be easily accomplished in a syringe, including probe loading, acetamiprid capture and magnetic separation from crude samples, chromogenic reagent loading and colorimetric visualization. Acetamiprid concentration down to 3.3 ppb can be easily identified by the naked eye. The final solution also can be transferred for quantitative measurement. Under spectrometer, the ratio of the absorbance at 652 nm in the presence and absence of acetamiprid (A/A₀) is linearly related to the acetamiprid concentration in the 0.4-4.5 ppb range. The limit of detection is calculated to be 0.24 ppb. Moreover, satisfactory recoveries ranging from 90.90 to 91.82% with relative standard deviations of ≤2.96% were obtained in analyzing real spiked samples.

Analytical methods to analyze pesticides and herbicides

Presented in this paper is an annual review of literatures published in 2018 on topics relating to analytical methods for pesticides and herbicides. According to the different techniques, this review is divided into six sections, including extraction methods; chromatographic or mass spectrometric techniques; electrochemical techniques; spectrophotometric techniques; chemiluminescence and fluorescence methods; and biochemical assays. PRACTITIONER POINTS: Totally 134 relevant research articles are summarized. The review is divided into six parts according to the techniques. Chromatographic and mass spectrometric methods are the most widely used.

An aptamer based aggregation assay for the neonicotinoid insecticide acetamiprid using fluorescent upconversion nanoparticles and DNA functionalized gold nanoparticles

An acetamiprid-binding aptamer (ABA), gold nanoparticles (AuNPs) and upconversion nanoparticles (UCNPs) are used in a colorimetric and fluorometric method for the ultrasensitive and selective detection of the pesticide acetamiprid. The ABA is first configured into a duplex with a complementary DNA covalently attached to AuNPs. The resulting dsDNA-functionalized AuNP probe is not stable in 0.15 M NaCl solution and aggregates. This causing the color to change from red to purple. In the presence of acetamiprid, the ABA undergoes a structural switch from a DNA duplex to an aptamer-acetamiprid complex and consequently dissociates from the AuNPs. The partially unhybridized AuNPs are stable against salt-induced aggregation and show red color. The ratio of absorbances at 524 nm (red) and 650 nm (purple blue) varies with the concentration of acetamiprid in the 0.025-10 μM concentration range. The colorimetric signal can be further amplified by introducing DNA-modified carboxylated UCNPs (silica-coated NaYF₄:Yb,Er) which display red and green fluorescence under 980 nm excitation. An inner filter effect occurs between DNA-modified UCNPs and dsDNA-modified AuNPs. The fluorometric assay is based on the measurement of the ratio of red (654 nm) and green (540 nm) fluorescence and works in the 0.025 to 1 μM acetamiprid concentration range and has a 0.36 nM detection limit (at a signal-to-noise ratio of 3). Because of the specificity of the aptamer, the assay is high selective. It was successfully used to quantify acetamiprid in contaminated real samples. Graphical abstract Schematic presentation of an upconversion fluorescent assay for acetamiprid. It involves the principle of analyte-triggered structural switch of aptamers, salt-induced AuNP aggregation, and signal amplification from UCNP.

Trends and Perspectives in Immunosensors for Determination of Currently-Used Pesticides: The Case of Glyphosate, Organophosphates, and Neonicotinoids

Pesticides, due to their intensive use and their peculiar chemical features, can persist in the environment and enter the trophic chain, thus representing an environmental risk for the ecosystems and human health. Although there are several robust and reliable standard analytical techniques for their monitoring, the high frequency of contamination caused by pesticides requires methods for massive monitoring campaigns that are capable of rapidly detecting these compounds in many samples of different origin. Immunosensors represent a potential tool for simple, rapid, and sensitive monitoring of pesticides. Antibodies coupled to electrochemical or optical transducers have resulted in effective detection devices. In this review, the new trends in immunosensor development and the application of immunosensors for the detection of pesticides of environmental concern-such as glyphosate, organophosphates, and neonicotinoids-are described.

A Novel Nutrient Deprivation-Induced Neonicotinoid Insecticide Acetamiprid Degradation by Ensifer adhaerens CGMCC 6315

Biodegradation of pesticide pollution is often restricted by environmental pressures, such as nutrient deprivation. Ensifer adhaerens CGMCC 6315 could overcome this issue and degrade neonicotinoid acetamiprid (ACE) efficiently under low nutrient stimuli. The ACE degradation rate improved by 33.1-fold when the lysogeny broth content for cell culture was decreased to 1/15-fold. Resting cells of CGMCC 6315 degraded 94.4% of 200 mg/L ACE in 12 h and quickly eliminated 87.8% of 5 mg/kg of residual soil ACE within 2 d. ACE degradation by CGMCC 6315 was via a nitrile hydratase (NHase) pathway. Genome sequencing showed that CGMCC 6315 had two NHase genes ( cnhA and pnhA). PnhA had the highest reported activity of 28.8 U/mg for ACE. QPCR and proteomic analysis showed that the improved ACE degradation ability was attributed to the up-regulated expression of PnhA. This biodegradation system of CGMCC 6315 has great potential for use in pesticide pollution remediation.