Fixed-Quat: An Attractive Nonmetal Alternative to Copper Biocides against Plant Pathogens

Isolation, Characterization and Antibacterial Activity of 4-Allylbenzene-1,2-diol from Piper austrosinense

Isolation for antibacterial compounds from natural plants is a promising approach to develop new pesticides. In this study, two compounds were obtained from the Chinese endemic plant Piper austrosinense using bioassay-guided fractionation. Based on analyses of ¹H-NMR, ¹³C-NMR, and mass spectral data, the isolated compounds were identified as 4-allylbenzene-1,2-diol and (S)-4-allyl-5-(1-(3,4-dihydroxyphenyl)allyl)benzene-1,2-diol. 4-Allylbenzene-1,2-diol was shown to have strong antibacterial activity against four plant pathogens, including Xanthomonas oryzae pathovar oryzae (Xoo), X. axonopodis pv. citri (Xac), X. oryzae pv. oryzicola (Xoc) and X. campestris pv. mangiferaeindicae (Xcm). Further bioassay results exhibited that 4-allylbenzene-1,2-diol had a broad antibacterial spectrum, including Xoo, Xac, Xoc, Xcm, X. fragariae (Xf), X. campestris pv. campestris (Xcc), Pectobacterium carotovorum subspecies brasiliense (Pcb) and P. carotovorum subsp. carotovorum (Pcc), with minimum inhibitory concentration (MIC) values ranging from 333.75 to 1335 μmol/L. The pot experiment showed that 4-allylbenzene-1,2-diol exerted an excellent protective effect against Xoo, with a controlled efficacy reaching 72.73% at 4 MIC, which was superior to the positive control kasugamycin (53.03%) at 4 MIC. Further results demonstrated that the 4-allylbenzene-1,2-diol damaged the integrity of the cell membrane and increased cell membrane permeability. In addition, 4-allylbenzene-1,2-diol also prevented the pathogenicity-related biofilm formation in Xoo, thus limiting the movement of Xoo and reducing the production of extracellular polysaccharides (EPS) in Xoo. These findings suggest the value of 4-allylbenzene-1,2-diol and P. austrosinense could be as promising resources for developing novel antibacterial agents.

Simulated Leaching of Foliar Applied Copper Bactericides on the Soil Microbiome Utilizing Various Beta Diversity Resemblance Measurements

Copper bactericides are routinely used to control Xanthomonas perforans (XP), causal agent of bacterial spot of tomato. Given the widespread tolerance to copper in XP strains in FL, USA, nanotechnology-based elemental composites have gained interest for their potential applications in agriculture in part due to their enhanced antimicrobial properties and toxicity to copper-tolerant strains. However, little is known about the potential impact of conventional copper bactericides as well as nano-based elemental composites on soil microbial communities, as determined by high-throughput sequencing of the 16S rDNA. We compared the effects of 2 and 200 μg/mL of core-shell (CS), a metallic copper composite, and a conventional copper bactericide + mancozeb (Cu+Man) on the soil microbiome. These treatments were compared to three controls, the microbial profile of the soil prior to application of copper products, a water application, and spiking the soil with a soilborne phytobacterium, Ralstonia solanacearum (RS). The RS treatment was included to determine if downstream analysis could detect the artificial inoculation. Utilizing multiple β diversity measurements, each emphasizing various tenets of ecology, provided a greater perspective of the effects the treatments had on the microbiome. Analysis of HTS data revealed that the two treatments containing field applied rates of metallic copper, CS 200 and Cu+Man, had the largest impact on the soil microbiome at seven-days posttreatment compared to water. However, we simulated field applied rates of CS 200 entering the soil by treating soil with CS 2 and determined this concentration had a negligible effect on the soil microbiome. IMPORTANCE Nanotechnology-based elemental composites have gained popularity for their potential applications in plant disease management due to their enhanced antimicrobial properties. However, little is known about their potential impact on the environment. Foliar applications of nano metallic composites upon leaching into the soil have the potential to impact soil microbial populations that in turn influence soil health. Utilizing multiple β diversity measurements, high-throughput sequencing analysis revealed that field applied rates of metallic copper (200 μg/mL) from an advanced copper composite (core-shell [CS]) and a conventional copper bactericide in combination with mancozeb had the largest impact on the soil microbiome compared to water and nontreated control. To simulate leaching from the leaf surface, a lower concentration (2 μg/mL) of CS was also applied to the soil and had a negligible effect on the soil microbiome. Thus, field applied rates of CS may have a minimal effect on soil microbial communities.

Magnesium Oxide Nanomaterial, an Alternative for Commercial Copper Bactericides: Field-Scale Tomato Bacterial Spot Disease Management and Total and Bioavailable Metal Accumulation in Soil

Copper (Cu) is the most extensively used bactericide worldwide in many agricultural production systems. However, intensive application of Cu bactericide have increased the selection pressure toward Cu-tolerant pathogens, including Xanthomonas perforans, the causal agent of tomato bacterial spot. However, alternatives for Cu bactericides are limited and have many drawbacks including plant damage and inconsistent effectiveness under field conditions. Also, potential ecological risk on nontarget organisms exposed to field runoff containing Cu is high. However, due to lack of alternatives for Cu, it is still widely used in tomato and other crops around the world in both conventional and organic production systems. In this study, a Cu-tolerant X. perforans strain GEV485, which can tolerate eight tested commercial Cu bactericides, was used in all the field trials to evaluate the efficacy of MgO nanomaterial. Four field experiments were conducted to evaluate the impact of intensive application of MgO nanomaterial on tomato bacterial spot disease severity, and one field experiment was conducted to study the impact of soil accumulation of total and bioavailable Cu, Mg, Mn, and Zn. In the first two field experiments, twice-weekly applications of 200 μg/mL MgO significantly reduced disease severity by 29-38% less in comparison to a conventional Cu bactericide Kocide 3000 and 19-30% less in comparison to the water control applied at the same frequency (p = 0.05). The disease severity on MgO twice-weekly was 12-32% less than Kocide 3000 + Mancozeb treatment. Single weekly applications of MgO had 13-19% higher disease severity than twice weekly application of MgO. In the second set of two field trials, twice-weekly applications of MgO at 1000 μg/mL significantly reduced disease severity by 32-40% in comparison to water control applied at the same frequency (p = 0.05). There was no negative yield impact in any of the trials. The third field experiment demonstrated that application of MgO did not result in significant accumulation of total and bioavailable Mg, Mn, Cu, or Zn in the root-associated soil and in soil farther away from the production bed compared to the water control. However, Cu bactericide contributed to significantly higher Mn, Cu, and Zn accumulation in the soil compared to water control (p = 0.05). This study demonstrates that MgO nanomaterial could be an alternative for Cu bactericide and have potential in reducing risks associated with development of tolerant strains and for reducing Cu load in the environment.

Multifunctional Surface, Subsurface, and Systemic Therapeutic (MS3T) Formulation for the Control of Citrus Canker

A multifunctional surface, subsurface and systemic therapeutic (MS3T) formulation comprised of two bactericides, both didecyldimethylammonium chloride (DDAC) and a zinc (Zn)-chelate, was developed as an alternative to copper pesticides for crop protection. Agricultural grade chemicals were used to prepare MS3T formulations. Minimal inhibitory concentration (MIC) was determined to be tested in vitro against Xanthomonas alfalfae subsp. citrumelonis (herein called Xa), Escherichia coli (E. coli), and Pseudomonas syringae (Ps). Assessment of the phytotoxic potential was carried out on tomato under greenhouse conditions. Moreover, field trials were conducted during three consecutive years on grapefruit (Chrysopelea paradise) groves to evaluate efficacy against citrus canker (Xanthomonas citri subsp. citri), scab (Elsinoe fawcetti), and melanose (Diaporthe citri). In addition to disease control, improvements to both fruit yield and quality were observed likely due to the nutritional activity of MS3T via the sustained release of plant nutrients (Zn and nitrogen). Zn residues of leaf tissues were analyzed via atomic absorption spectroscopy (AAS) at various time points before and after MS3T foliar applications throughout the duration of the 2018 field trial. Field trial results demonstrated MS3T to be an effective alternative to copper (Cu)-based formulations for the control of citrus canker.

Copper-fixed quat: a hybrid nanoparticle for application as a locally systemic pesticide (LSP) to manage bacterial spot disease of tomato

The development of bacterial tolerance against pesticides poses a serious threat to the sustainability of food production. Widespread use of copper (Cu)-based products for plant disease management has led to the emergence of copper-tolerant pathogens such as Xanthomonas perforans (X. perforans) strains in Florida, which is very destructive to the tomato (Solanum lycopersicum) industry. In this study, we report a hybrid nanoparticle (NP)-based system, coined Locally Systemic Pesticide (LSP), which has been designed for improved efficacy compared to conventional Cu-based bactericides against Cu-tolerant X. perforans. The silica core-shell structure of LSP particles makes it possible to host ultra-small Cu NPs (<10 nm) and quaternary ammonium (Quat) molecules on the shell. The morphology, release of Cu and Quat, and subsequent in vitro antimicrobial properties were characterized for LSP NPs with core diameters from 50 to 600 nm. A concentration of 4 μg mL^-1 (Cu): 1 μg mL^-1 (Quat) was found to be sufficient to inhibit the growth of Cu-tolerant X. perforans compared to 100 μg mL^-1 (metallic Cu) required with standard Kocide 3000. Wetting properties of LSP exhibited contact angles below 60°, which constitutes a significant improvement from the 90° and 85° observed with water and Kocide 3000, respectively. The design was also found to provide slow Cu release to the leaves upon water washes, and to mitigate the phytotoxicity of water-soluble Cu and Quat agents. With Cu and Quat bound to the LSP silica core-shell structure, no sign of phytotoxicity was observed even at 1000 μg mL^-1 (Cu). In greenhouse and field experiments, LSP formulations significantly reduced the severity of bacterial spot disease compared to the water control. Overall, the study highlights the potential of using LSP particles as a candidate for managing tomato bacterial spot disease and beyond.

Novel piperazine-tailored ursolic acid hybrids as significant antibacterial agents targeting phytopathogens Xanthomonas oryzae pv. oryzae and X. axonopodis pv. citri probably directed by activation of apoptosis

BACKGROUND

Induced apoptosis is an effective technique that can reprogram cellular physiological and pathological processes to eradicate undesirable cells using their innate systems. Inspired by this, numerous apoptosis inducers have been developed to treat animal diseases, especially in the anticancer field. However, few studies have reported on the development of inductive agents that attack plant pathogens by activation of apoptosis. With the aim of exploring and discovering apoptosis inducers that target phytopathogens, a cluster of piperazine-tailored ursolic acid (UA) hybrids was systematically fabricated.

RESULTS

In vitro testing showed that the title molecules could inhibit the growth of two intractable bacterial strains, defined as Xanthomonas oryzae pv. oryzae and X. axonopodis pv. citri. The corresponding lowest EC50 values were 0.37 and 1.08 μg mL-1 , which exceed those of UA (>400 μg mL-1 ) and positive controls. Moreover, compounds 5u and 5v could manage bacterial blight in vivo using pot experiments. Flow cytometer analysis indicted that the title compounds could induce distinct apoptotic behaviors on tested bacteria. In-depth study revealed that the introduction of designed compounds could reduce the enzyme activities of catalase and superoxide dismutase, subsequently leading to the accumulation of reactive oxygen species.

CONCLUSION

This study promoted the development of apoptosis initiators for managing bacterial infections in agriculture by an innovative mode of action. © 2020 Society of Chemical Industry.

Silica-quaternary ammonium "Fixed-Quat" nanofilm coated fiberglass mesh for water disinfection and harmful algal blooms control

Intensification of pollution loading worldwide has promoted an escalation of different types of disease-causing microorganisms, such as harmful algal blooms (HABs), instigating detrimental impacts on the quality of receiving surface waters. Formation of unwanted disinfection by-products (DBPs) resulting from conventional disinfection technologies reveals the need for the development of new sustainable alternatives. Quaternary Ammonium Compounds (QACs) are cationic surfactants widely known for their effective biocidal properties at the ppm level. In this study, a novel silica-based antimicrobial nanofilm was developed using a composite of silica-modified QAC (Fixed-Quat) and applied to a fiberglass mesh as an active surface via sol-gel technique. The synthesized Fixed-Quat nanocoating was found to be effective against E. coli with an inactivation rate of 1.3 × 10^-3 log reduction/cm min. The Fixed-Quat coated fiberglass mesh also demonstrated successful control of Microcystis aeruginosa with more than 99% inactivation after 10 hr of exposure. The developed antimicrobial mesh was also evaluated with wild-type microalgal species collected in a water body experiencing HABs, obtaining a 97% removal efficiency. Overall, the silica-functionalized Fixed-Quat nanocoating showed promising antimicrobial properties for water disinfection and HABs control, while decreasing concerns related to DBPs formation and the possible release of toxic nanomaterials into the environment.