1
|
Ashani MN, Huang Q, Flowers AM, Brown A, Aerts A, Otero-de-la-Roza A, DiLabio GA. Accurate Potential Energy Surfaces Using Atom-Centered Potentials and Minimal High-Level Data. J Phys Chem A 2023; 127:8015-8024. [PMID: 37712536 DOI: 10.1021/acs.jpca.3c04558] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 09/16/2023]
Abstract
We demonstrate that a Δ-density functional theory (Δ-DFT) approach based on atom-centered potentials (ACPs) represents a computationally inexpensive and accurate method for representing potential energy surfaces (PESs) for the HONO and HFCO molecules and vibrational frequencies derived therefrom. Using as few as 100 CCSD(T)-F12a reference energies, ACPs developed for use with B3LYP/def2-TZVPP are shown to produce PESs for HONO and HFCO with mean absolute errors of 27.7 and 5.8 cm-1, respectively. Application of the multiconfigurational time-dependent Hartree (MCTDH) method with ACP-corrected B3LYP/def2-TZVPP PESs produces vibrational frequencies for cis- and trans-HONO with mean absolute percent errors (MAPEs) of 0.8 and 1.1, compared to 0.8 obtained for the two isomers with CCSD(T)-F12a/cc-pVTZ-F12/MCTDH. For HFCO, the vibrational frequencies obtained using the present (Δ-DFT)/MCTDH approach give a MAPE of 0.1, which is the error obtained with CCSD(T)-F12a/cc-pVTZ-F12/MCTDH. The ACP approach is therefore successful in representing a PES calculated at a high level of theory (CCSD(T)-F12a) and a promising method for the development of a general protocol for the representation of accurate molecular PESs and the calculation of molecular properties from them.
Collapse
Affiliation(s)
- Mahsa Nazemi Ashani
- Department of Chemistry, University of British Columbia, 3247 University Way, Kelowna, British Columbia V1V 1V7, Canada
| | - Qinan Huang
- Department of Chemistry, University of British Columbia, 3247 University Way, Kelowna, British Columbia V1V 1V7, Canada
| | - A Mackenzie Flowers
- Department of Chemistry, University of Alberta, Edmonton, AB T6G 2G2, Canada
| | - Alex Brown
- Department of Chemistry, University of Alberta, Edmonton, AB T6G 2G2, Canada
| | - Antoine Aerts
- Spectroscopy, Quantum Chemistry and Atmospheric Remote Sensing (SQUARES), Université libre de Bruxelles, 50 avenue F. Roosevelt, C.P. 160/09, B-1050 Brussels, Belgium
| | - Alberto Otero-de-la-Roza
- Departamento de Química Física y Analítica and MALTA Consolider Team, Facultad de Química, Universidad de Oviedo, 33006 Oviedo, Spain
| | - Gino A DiLabio
- Department of Chemistry, University of British Columbia, 3247 University Way, Kelowna, British Columbia V1V 1V7, Canada
| |
Collapse
|
2
|
Godwin B, Anvari MH, Olfatbakhsh T, Mahbod M, Milani AS, DiLabio GA, Wulff JE. A Single-Atom Upgrade to Polydicyclopentadiene. Macromolecules 2023. [DOI: 10.1021/acs.macromol.2c02260] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/11/2023]
Affiliation(s)
- Benjamin Godwin
- Department of Chemistry, University of Victoria, Victoria, British Columbia V8W 3V6, Canada
| | - Monir H. Anvari
- Department of Chemistry, University of British Columbia, Kelowna, British Columbia V1V 1V7, Canada
| | - Tina Olfatbakhsh
- Materials and Manufacturing Research Institute (MMRI), University of British Columbia, Kelowna, British Columbia V1V 1V7, Canada
| | - Mahshid Mahbod
- Materials and Manufacturing Research Institute (MMRI), University of British Columbia, Kelowna, British Columbia V1V 1V7, Canada
| | - Abbas S. Milani
- Materials and Manufacturing Research Institute (MMRI), University of British Columbia, Kelowna, British Columbia V1V 1V7, Canada
| | - Gino A. DiLabio
- Department of Chemistry, University of British Columbia, Kelowna, British Columbia V1V 1V7, Canada
| | - Jeremy E. Wulff
- Department of Chemistry, University of Victoria, Victoria, British Columbia V8W 3V6, Canada
- Centre for Advanced Materials and Related Technology (CAMTEC), University of Victoria, Victoria, British Columbia V8W 2Y2, Canada
- Department of Chemistry, University of Bath, Bath BA2 7AY, United Kingdom
| |
Collapse
|
3
|
Tuca E, DiLabio G, Otero-de-la-Roza A. Minimal Basis Set Hartree-Fock Corrected with Atom-Centered Potentials for Molecular Crystal Modeling and Crystal Structure Prediction. J Chem Inf Model 2022; 62:4107-4121. [PMID: 35980964 DOI: 10.1021/acs.jcim.2c00656] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
Crystal structure prediction (CSP), determining the experimentally observable structure of a molecular crystal from the molecular diagram, is an important challenge with technologically relevant applications in materials manufacturing and drug design. For the purpose of screening the randomly generated candidate crystal structures, CSP protocols require energy ranking methods that are fast and can accurately capture the small energy differences between molecular crystals. In addition, a good ranking method should also produce accurate equilibrium geometries, both intramolecular and intermolecular. In this article, we explore the combination of minimal-basis-set Hartree-Fock (HF) with atom-centered potentials (ACPs) as a method for modeling the structure and energetics of molecular crystals. The ACPs are developed for the H, C, N, and O atoms and fitted to a set of reference data at the B86bPBE-XDM level in order to mitigate basis-set incompleteness and missing correlation. In particular, ACPs are developed in combination with two methods: HF-D3/MINIs and HF-3c. The application of ACPs greatly improves the performance of HF-D3/MINIs for lattice energies, crystal energy differences, energy-volume and energy-strain relations, and crystal geometries. In the case of HF-3c, the improvement in the crystal energy differences is much smaller than in HF-D3/MINIs, but lattice energies and particularly crystal geometries are considerably better when ACPs are used. The resulting methods may be useful for CSP but also for quick calculation of molecular crystal lattice energies and geometries.
Collapse
Affiliation(s)
- Emilian Tuca
- Department of Chemistry, University of British Columbia, Okanagan, 3247 University Way, Kelowna V1 V 1 V7, British Columbia, Canada
| | - Gino DiLabio
- Department of Chemistry, University of British Columbia, Okanagan, 3247 University Way, Kelowna V1 V 1 V7, British Columbia, Canada
| | - Alberto Otero-de-la-Roza
- Departamento de Química Física y Analítica and MALTA-Consolider Team, Facultad de Química, Universidad de Oviedo, 33006 Oviedo, Spain
| |
Collapse
|
4
|
Yang Z, Hajlasz N, Kulik HJ. Computational Modeling of Conformer Stability in Benenodin-1, a Thermally Actuated Lasso Peptide Switch. J Phys Chem B 2022; 126:3398-3406. [PMID: 35481742 DOI: 10.1021/acs.jpcb.2c00762] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
Abstract
Benenodin-1 is a thermally actuated lasso peptide rotaxane switch with two primary translational isomers that differ in the relative position of the residue Gln15. The conversion from one conformer to the other involves substantial enthalpy-entropy compensation: one conformer is energetically favored and the other is entropically favored. Here, we take a multi-scale quantum mechanical (QM) and classical molecular dynamic (MD) approach to reveal residue-specific sources of these differences in stability. QM reveals that the two benenodin-1 conformers involve distinct hydrogen bonding networks, with the enthalpically favored conformer having more intra-peptide hydrogen bonds between the Gln15 side chain and nearby residues. The evaluation of configurational entropy over the MD-sampled geometries reveals that the entropically favored conformer has enhanced conformational flexibility. By computing the by-residue-sum entropies, we identify the role of Gln15 and neighboring Glu14 in mediating the entropic variation during the switching process. These computational insights help explain the effects of Glu14Ala and Gln15Ala mutations on the conformational population of benenodin-1 observed experimentally.
Collapse
Affiliation(s)
- Zhongyue Yang
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Natalia Hajlasz
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| | - Heather J Kulik
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, United States
| |
Collapse
|
5
|
Prasad VK, Otero-de-la-Roza A, DiLabio GA. Small-Basis Set Density-Functional Theory Methods Corrected with Atom-Centered Potentials. J Chem Theory Comput 2022; 18:2913-2930. [PMID: 35412817 DOI: 10.1021/acs.jctc.2c00036] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/12/2022]
Abstract
Density functional theory (DFT) is currently the most popular method for modeling noncovalent interactions and thermochemistry. The accurate calculation of noncovalent interaction energies, reaction energies, and barrier heights requires choosing an appropriate functional and, typically, a relatively large basis set. Deficiencies of the density-functional approximation and the use of a limited basis set are the leading sources of error in the calculation of noncovalent and thermochemical properties in molecular systems. In this article, we present three new DFT methods based on the BLYP, M06-2X, and CAM-B3LYP functionals in combination with the 6-31G* basis set and corrected with atom-centered potentials (ACPs). ACPs are one-electron potentials that have the same form as effective-core potentials, except they do not replace any electrons. The ACPs developed in this work are used to generate energy corrections to the underlying DFT/basis-set method such that the errors in predicted chemical properties are minimized while maintaining the low computational cost of the parent methods. ACPs were developed for the elements H, B, C, N, O, F, Si, P, S, and Cl. The ACP parameters were determined using an extensive training set of 118655 data points, mostly of complete basis set coupled-cluster level quality. The target molecular properties for the ACP-corrected methods include noncovalent interaction energies, molecular conformational energies, reaction energies, barrier heights, and bond separation energies. The ACPs were tested first on the training set and then on a validation set of 42567 additional data points. We show that the ACP-corrected methods can predict the target molecular properties with accuracy close to complete basis set wavefunction theory methods, but at a computational cost of double-ζ DFT methods. This makes the new BLYP/6-31G*-ACP, M06-2X/6-31G*-ACP, and CAM-B3LYP/6-31G*-ACP methods uniquely suited to the calculation of noncovalent, thermochemical, and kinetic properties in large molecular systems.
Collapse
Affiliation(s)
- Viki Kumar Prasad
- Department of Chemistry, University of British Columbia, Okanagan, 3247 University Way, Kelowna, British Columbia V1V 1V7, Canada
| | - Alberto Otero-de-la-Roza
- Departamento de Química Física y Analítica, Facultad de Química, Universidad de Oviedo, MALTA Consolider Team, Oviedo E-33006, Spain
| | - Gino A DiLabio
- Department of Chemistry, University of British Columbia, Okanagan, 3247 University Way, Kelowna, British Columbia V1V 1V7, Canada
| |
Collapse
|
6
|
Prasad VK, Otero-de-la-Roza A, DiLabio GA. Fast and Accurate Quantum Mechanical Modeling of Large Molecular Systems Using Small Basis Set Hartree-Fock Methods Corrected with Atom-Centered Potentials. J Chem Theory Comput 2022; 18:2208-2232. [PMID: 35313106 DOI: 10.1021/acs.jctc.1c01128] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
There has been significant interest in developing fast and accurate quantum mechanical methods for modeling large molecular systems. In this work, by utilizing a machine learning regression technique, we have developed new low-cost quantum mechanical approaches to model large molecular systems. The developed approaches rely on using one-electron Gaussian-type functions called atom-centered potentials (ACPs) to correct for the basis set incompleteness and the lack of correlation effects in the underlying minimal or small basis set Hartree-Fock (HF) methods. In particular, ACPs are proposed for ten elements common in organic and bioorganic chemistry (H, B, C, N, O, F, Si, P, S, and Cl) and four different base methods: two minimal basis sets (MINIs and MINIX) plus a double-ζ basis set (6-31G*) in combination with dispersion-corrected HF (HF-D3/MINIs, HF-D3/MINIX, HF-D3/6-31G*) and the HF-3c method. The new ACPs are trained on a very large set (73 832 data points) of noncovalent properties (interaction and conformational energies) and validated additionally on a set of 32 048 data points. All reference data are of complete basis set coupled-cluster quality, mostly CCSD(T)/CBS. The proposed ACP-corrected methods are shown to give errors in the tenths of a kcal/mol range for noncovalent interaction energies and up to 2 kcal/mol for molecular conformational energies. More importantly, the average errors are similar in the training and validation sets, confirming the robustness and applicability of these methods outside the boundaries of the training set. In addition, the performance of the new ACP-corrected methods is similar to complete basis set density functional theory (DFT) but at a cost that is orders of magnitude lower, and the proposed ACPs can be used in any computational chemistry program that supports effective-core potentials without modification. It is also shown that ACPs improve the description of covalent and noncovalent bond geometries of the underlying methods and that the improvement brought about by the application of the ACPs is directly related to the number of atoms to which they are applied, allowing the treatment of systems containing some atoms for which ACPs are not available. Overall, the ACP-corrected methods proposed in this work constitute an alternative accurate, economical, and reliable quantum mechanical approach to describe the geometries, interaction energies, and conformational energies of systems with hundreds to thousands of atoms.
Collapse
Affiliation(s)
- Viki Kumar Prasad
- Department of Chemistry, University of British Columbia, Okanagan, 3247 University Way, Kelowna, British Columbia, Canada V1V 1V7
| | - Alberto Otero-de-la-Roza
- MALTA Consolider Team, Departamento de Química Física y Analítica, Facultad de Química, Universidad de Oviedo, E-33006 Oviedo, Spain
| | - Gino A DiLabio
- Department of Chemistry, University of British Columbia, Okanagan, 3247 University Way, Kelowna, British Columbia, Canada V1V 1V7
| |
Collapse
|
7
|
Prasad VK, Pei Z, Edelmann S, Otero-de-la-Roza A, DiLabio GA. BH9, a New Comprehensive Benchmark Data Set for Barrier Heights and Reaction Energies: Assessment of Density Functional Approximations and Basis Set Incompleteness Potentials. J Chem Theory Comput 2021; 18:151-166. [PMID: 34911294 DOI: 10.1021/acs.jctc.1c00694] [Citation(s) in RCA: 23] [Impact Index Per Article: 7.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/13/2023]
Abstract
The calculation of accurate reaction energies and barrier heights is essential in computational studies of reaction mechanisms and thermochemistry. To assess methods regarding their ability to predict these two properties, high-quality benchmark sets are required that comprise a reasonably large and diverse set of organic reactions. Due to the time-consuming nature of both locating transition states and computing accurate reference energies for reactions involving large molecules, previous benchmark sets have been limited in scope, the number of reactions considered, and the size of the reactant and product molecules. Recent advances in coupled-cluster theory, in particular local correlation methods like DLPNO-CCSD(T), now allow the calculation of reaction energies and barrier heights for relatively large systems. In this work, we present a comprehensive and diverse benchmark set of barrier heights and reaction energies based on DLPNO-CCSD(T)/CBS called BH9. BH9 comprises 449 chemical reactions belonging to nine types common in organic chemistry and biochemistry. We examine the accuracy of DLPNO-CCSD(T) vis-a-vis canonical CCSD(T) for a subset of BH9 and conclude that, although there is a penalty in using the DLPNO approximation, the reference data are accurate enough to serve as a benchmark for density functional theory (DFT) methods. We then present two applications of the BH9 set. First, we examine the performance of several density functional approximations commonly used in thermochemical and mechanistic studies. Second, we assess our basis set incompleteness potentials regarding their ability to mitigate basis set incompleteness errors. The number of data points, the diversity of the reactions considered, and the relatively large size of the reactant molecules make BH9 the most comprehensive thermochemical benchmark set to date and a useful tool for the development and assessment of computational methods.
Collapse
Affiliation(s)
- Viki Kumar Prasad
- Department of Chemistry, University of British Columbia, 3247 University Way, Kelowna, British Columbia, Canada V1V 1V7
| | - Zhipeng Pei
- Department of Chemistry, University of British Columbia, 3247 University Way, Kelowna, British Columbia, Canada V1V 1V7
| | - Simon Edelmann
- Department of Chemistry, University of British Columbia, 3247 University Way, Kelowna, British Columbia, Canada V1V 1V7
| | - Alberto Otero-de-la-Roza
- Departamento de Química Física y Analítica and MALTA Consolider Team, Facultad de Química, Universidad de Oviedo, 33006 Oviedo, Spain
| | - Gino A DiLabio
- Department of Chemistry, University of British Columbia, 3247 University Way, Kelowna, British Columbia, Canada V1V 1V7
| |
Collapse
|
8
|
Prasad VK, Khalilian MH, Otero-de-la-Roza A, DiLabio GA. BSE49, a diverse, high-quality benchmark dataset of separation energies of chemical bonds. Sci Data 2021; 8:300. [PMID: 34815431 PMCID: PMC8611007 DOI: 10.1038/s41597-021-01088-2] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/06/2021] [Accepted: 11/01/2021] [Indexed: 01/23/2023] Open
Abstract
We present an extensive and diverse dataset of bond separation energies associated with the homolytic cleavage of covalently bonded molecules (A-B) into their corresponding radical fragments (A. and B.). Our dataset contains two different classifications of model structures referred to as "Existing" (molecules with associated experimental data) and "Hypothetical" (molecules with no associated experimental data). In total, the dataset consists of 4502 datapoints (1969 datapoints from the Existing and 2533 datapoints from the Hypothetical classes). The dataset covers 49 unique X-Y type single bonds (except H-H, H-F, and H-Cl), where X and Y are H, B, C, N, O, F, Si, P, S, and Cl atoms. All the reference data was calculated at the (RO)CBS-QB3 level of theory. The reference bond separation energies are non-relativistic ground-state energy differences and contain no zero-point energy corrections. This new dataset of bond separation energies (BSE49) is presented as a high-quality reference dataset for assessing and developing computational chemistry methods.
Collapse
Affiliation(s)
- Viki Kumar Prasad
- Department of Chemistry, University of British Columbia, Kelowna, British Columbia, V1V 1V7, Canada
| | - M Hossein Khalilian
- Department of Chemistry, University of British Columbia, Kelowna, British Columbia, V1V 1V7, Canada
| | - Alberto Otero-de-la-Roza
- Departamento de Química Física y Analítica, Facultad de Química, Universidad de Oviedo, MALTA Consolider Team, E-33006, Oviedo, Spain
| | - Gino A DiLabio
- Department of Chemistry, University of British Columbia, Kelowna, British Columbia, V1V 1V7, Canada.
| |
Collapse
|
9
|
Mendes RA, Haiduke RLA. Performance of new exchange–correlation functionals in providing vertical excitation energies of metal complexes. Theor Chem Acc 2021. [DOI: 10.1007/s00214-021-02844-8] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
10
|
Harder, better, faster, stronger: Large-scale QM and QM/MM for predictive modeling in enzymes and proteins. Curr Opin Struct Biol 2021; 72:9-17. [PMID: 34388673 DOI: 10.1016/j.sbi.2021.07.004] [Citation(s) in RCA: 36] [Impact Index Per Article: 12.0] [Reference Citation Analysis] [Abstract] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/28/2021] [Revised: 06/25/2021] [Accepted: 07/05/2021] [Indexed: 11/23/2022]
Abstract
Computational prediction of enzyme mechanism and protein function requires accurate physics-based models and suitable sampling. We discuss recent advances in large-scale quantum mechanical (QM) modeling of biochemical systems that have reduced the cost of high-accuracy models. Tradeoffs between sampling and accuracy have motivated modeling with molecular mechanics (MM) in a multiscale QM/MM or iterative approach. Limitations to both conventional density-functional theory and classical MM force fields remain for describing noncovalent interactions in comparison to experiment or wavefunction theory. Because predictions of enzyme action (i.e. electrostatics), free energy barriers, and mechanisms are sensitive to the protocol and embedding method in QM/MM, convergence tests and systematic methods for quantifying QM-level interactions are a needed, active area of development.
Collapse
|
11
|
Mehta N, Goerigk L. Assessing the Applicability of the Geometric Counterpoise Correction in B2PLYP/Double-ζ Calculations for Thermochemistry, Kinetics, and Noncovalent Interactions. Aust J Chem 2021. [DOI: 10.1071/ch21133] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
Abstract
We present a proof-of-concept study of the suitability of Kruse and Grimme’s geometric counterpoise correction (gCP) for basis set superposition errors (BSSEs) in double-hybrid density functional calculations with a double-ζ basis set. The gCP approach only requires geometrical information as an input and no orbital/density information is needed. Therefore, this correction is practically free of any additional cost. gCP is trained against the Boys and Bernardi counterpoise correction across a set of 528 noncovalently bound dimers. We investigate the suitability of the approach for the B2PLYP/def2-SVP level of theory, and reveal error compensation effects—missing London dispersion and the BSSE—associated with B2PLYP/def2-SVP calculations, and present B2PLYP-gCP-D3(BJ)/def2-SVP with the reparametrised DFT-D3(BJ) and gCP corrections as a more balanced alternative. Benchmarking results on the S66x8 benchmark set for noncovalent interactions and the GMTKN55 database for main-group thermochemistry, kinetics, and noncovalent interactions show a statistical improvement of the B2PLYP-gCP-D3(BJ) scheme over plain B2PLYP and B2PLYP-D3(BJ). B2PLYP-D3(BJ) shows significant overestimation of interaction energies, barrier heights with larger deviations from the reference values, and wrong relative stabilities in conformers, all of which can be associated with BSSE. We find that the gCP-corrected method represents a significant improvement over B2PLYP-D3(BJ), particularly for intramolecular noncovalent interactions. These findings encourage future developments of efficient double-hybrid DFT strategies that can be applied when double-hybrid calculations with large basis sets are not feasible due to system size.
Collapse
|
12
|
Grebowski J, Konopko A, Krokosz A, DiLabio GA, Litwinienko G. Antioxidant activity of highly hydroxylated fullerene C 60 and its interactions with the analogue of α-tocopherol. Free Radic Biol Med 2020; 160:734-744. [PMID: 32871231 DOI: 10.1016/j.freeradbiomed.2020.08.017] [Citation(s) in RCA: 15] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Received: 07/16/2020] [Revised: 08/08/2020] [Accepted: 08/19/2020] [Indexed: 11/18/2022]
Abstract
Polyhydroxylated fullerenes (fullerenols) are excellent free radical scavengers. Despite the large number of reports on their reactions with reactive oxygen species, there is no report on their ability to trap lipid peroxyl radicals and act as chain-breaking antioxidants. In this work we studied the effect of fullerenol C60(OH)36 on the kinetics of peroxidation of polyunsaturated fatty acid ester (methyl linoleate) dispersed in two model systems that mimic biological systems: Triton X-100 micelles and Large Unilamellar Vesicles, at pH 4, 7 and 10. As a control antioxidant 2,2,5,7,8-pentamethyl-6-hydroxychroman (PMHC, an analog of α-tocopherol) was used. In micellar systems at pH 4.0, C60(OH)36 reacts with peroxyl radicals with kinh= (5.8 ± 0.3) × 103 M-1s-1 (for PMHC kinh = 22 × 103 M-1s-1). Surprisingly, at pH 7 a retardation instead of inhibition was recorded, and at pH 10 no effect on the kinetics of the process was observed. In liposomal systems fullerenol was not active at pH 4.0 but at pH 7.0 kinh = (8.8 ± 2.6) × 103 M-1s-1 for fullerenol was 30% lower than kinh for PMHC. Using two fluorescent probes we confirmed that at pH 7.4 fullerenol/fullerenol anions are incorporated into the phospholipid heads of the bilayer. We also studied the cooperation of C60(OH)36 with PMHC: both compounds seem to contribute their peroxyl radical trapping abilities independently at pH 4 whereas at pH 7 and 10 a hyper-synergy was observed. The antioxidant action of C60(OH)36 and its synergy with PMHC was also confirmed for peroxidation of human erythrocytes at pH 7.4. Assuming the simplified structural model of fullerenol limited to 36 hydroxyls as the only functional groups attached to C60 core we found by density-functional theory a low energy structure with OH groups distributed in the form of two polyhydroxyl regions separating two unsubstituted carbon regions with biphenyl-like structure. Our calculations indicate that abstraction of hydrogen atom from fullerenol by peroxyl or tocopheroxyl radical is endoergic. As the electron transfer from fullerenol polyanion to the radicals is also energetically disfavoured, the most probable mechanism of reaction with radicals is subsequent addition of peroxyl/tocopheroxyl radicals to biphenyl moieties surrounded by OH groups.
Collapse
Affiliation(s)
- Jacek Grebowski
- Department of Molecular Biophysics, Division of Radiobiology, Faculty of Biology and Environmental Protection, University of Lodz, Pomorska 141/143, 90-236, Lodz, Poland; The Military Medical Training Center, 6-Sierpnia 92, 90-646, Lodz, Poland; University of Warsaw, Faculty of Chemistry, Pasteura 1, 02-093, Warsaw, Poland
| | - Adrian Konopko
- University of Warsaw, Faculty of Chemistry, Pasteura 1, 02-093, Warsaw, Poland; Nencki Institute of Experimental Biology, Polish Academy of Sciences, 3 Pasteur St, 02-093, Warsaw, Poland
| | - Anita Krokosz
- Department of Biophysics of Environmental Pollution, Faculty of Biology and Environmental Protection, University of Lodz, Pomorska 141/143, 90-236, Lodz, Poland
| | - Gino A DiLabio
- Department of Chemistry and Faculty of Management, The University of British Columbia, 3247 University Way, Kelowna British Columbia, V1V 1V7, Canada
| | | |
Collapse
|