Discovery of Meso-(meta-Pyridinium) BODIPY Photosensitizers: In Vitro and In Vivo Evaluations for Antimicrobial Photodynamic Therapy

Synthesis and evaluation of a novel BODIPY fluorescent probe targeting integrin αvβ3 for cancer diagnosis

A series of integrin αvβ3 targeting BODIPY-RGD conjugate were designed and synthesized. Their in vitro and in vivo fluorescence imaging behaviors were investigated. The small molecule compound was designed as an optical imaging near-infrared fluorescent dye which was combined RGD peptide with the meso-amide BODIPYs using succinic moiety as a spacer. The construction alleviated the traditional BODIPY problems including poor water solubility, aggregate caused quench (ACQ) effect, low biocompatibility, etc. In cellular research, BDP-RGD-2 showed rapid, selective uptake in 3 highly expressing integrin αvβ3 cell lines MDA-MB-231, A549, U87MG at different extent rather than an integrin αvβ3 low level expression cell MCF-7. In animal study, fluorescence imaging of U87MG model targeted by BDP-RGD-2 displayed a highest tumor uptake level and T/N ratio up to 6 h after tail-intravenous injection, which demonstrated BDP-RGD-2 was a promising probe for tracing integrin αvβ3 overexpressing tumors.

Chitosan-BODIPY fluorescent composite materials for photodynamical antibacterial and therapy

Chitosan-based fluorescent copolymers containing borodipyrromethene (BODIPY) were synthesized and investigated. In this work, fluorescent compound (BOD-4) containing -C ≡ CH was synthesized firstly. Subsequently, chitosan (CS)-based polymer CS-I was obtained through the -NH2/-C ≡ C click reaction between BOD-4 and CS. Thirdly, CS-Py was prepared via Suzuki reaction between CS-I and pyridine. Finally, the synthesis of macromolecular photosensitizers, i.e. CS-Me and CS-Bn, was achieved by pyridinium salt formation. CS-Me and CS-Bn could produce reactive oxygen species (ROS) when exposed to white light, demonstrating superior light utilization efficiency. This strategy not only utilizes the photodynamic ability of photosensitizing molecules but also takes advantage of chitosan's biocompatibility and antibacterial efficacy. The photodynamic antimicrobial activities of the macromolecular photosensitizers have been tested against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). CS-Me and CS-Bn exhibited not only the inherent antibacterial properties but also photodynamic capabilities, which significantly enhance their antibacterial effectiveness. Under white light irradiation, bacteria can be effectively eradicated. When made into a film by loading CS-Me and CS-Bn onto transparent band-aid, excellent photodynamic antibacterial properties were obtained. CS-based photosensitizers maintain the biocompatibility and antibacterial properties of CS. In addition, they expand the scope of chitosan's application in photodynamic therapy (PDT) as well.

Aggregation Behavior of CHR-bis(BODIPY) Bichromophores in THF-water Mixtures: Effect of Linking Positions and Aryl-spacer Substituents

Aggregation-caused quenching effect (ACQ) greatly limits the practical use of many organic luminophores in biomedicine, optics and electronics. The comparative analysis of aggregation characteristics of CHR-bis(BODIPY) bichromophores 1-6 with R = H, Ph, MeOPh and various linking positions (α,α-; α,β-; β,β- and β',β'-) in THF-water mixtures with different water fractions or dye concentrations is first presented in this article. Both the linking style 1-4 and the arylation of the spacer with phenyl (Ph-) 5 or methoxyphenyl (MeOPh-) 6 substituents strongly affect the formation of luminophore aggregated forms in binary THF-water mixtures. The α,α-and β,β-isomers (1 and 3) form non-fluorescent H-type aggregates in THF-water mixtures with fw > 70%. The α,β-; β',β'-isomers (2, 4) and the MeOPh-substituted β,β-bichromophore 6 are characterized by predominant formation fluorescent aggregates. All bichromophores are characterized by the presence of residual amounts of non-aggregated forms in binary mixtures with maximum water content. The results are useful for controlling the aggregation behavior and spectral characteristics of CHR-bis(BODIPY) bichromophores in aqueous-organic media, which is important in the development of biomarkers and PDT agents.

Leveraging Chlorination-Based Mechanism for Resolving Subcellular Hypochlorous Acid

Hypochlorous acid (HOCl) is crucial for pathogen defense, but an imbalance in HOCl levels can lead to tissue damage and inflammation. Existing HOCl indicators employ an oxidation approach, which may not truly reveal the chlorinative stress environment. We designed a suite of indicators with a new chlorination-based mechanism, termed HOClSense dyes, to resolve HOCl in sub-cellular compartments. HOClSense dyes allow the visualization of HOCl with both switch-on and switch-off detection modes with diverse emission colors, as well as a unique redshift in emission. HOClSense features a minimalistic design with impressive sensing performance in terms of HOCl selectivity, and our design also facilitates functionalization through click chemistry for resolving subcellular HOCl. As a proof of concept, we targeted plasma membrane and lysosomes with HOClSense for subcellular HOCl mapping. With utilizing HOClSense, we discovered the STING pathway-induced HOCl production and the abnormal HOCl production in Niemann-Pick diseases. To the best of our knowledge, this is the first chlorination-based HOCl indicator series for resolving subcellular HOCl.

Antimicrobial Photodynamic Therapy: Self-Disinfecting Surfaces for Controlling Microbial Infections

Microbial infections caused by bacteria, viruses, and fungi pose significant global health threats in diverse environments. While conventional disinfection methods are effective, their reliance on frequent chemical applications raises concerns about resistance and environmental impact. Photodynamic self-disinfecting surfaces have emerged as a promising alternative. These surfaces incorporate photosensitizers that, when exposed to light, produce reactive oxygen species to target and eliminate microbial pathogens. This review explores the concept and mechanism of photodynamic self-disinfecting surfaces, highlighting the variety and characteristics of photosensitizers integrated into surfaces and the range of light sources used across different applications. It also highlights the effectiveness of these surfaces against a broad spectrum of pathogens, including bacteria, viruses, and fungi, while also discussing their potential for providing continuous antimicrobial protection without frequent reapplication. Additionally, the review addresses both the advantages and limitations associated with photodynamic self-disinfecting surfaces and concludes with future perspectives on advancing this technology to meet ongoing challenges in infection control.

Photosensitizer-loaded hydrogels: A new antibacterial dressing

Bacterial wound infection has emerged as a pivotal threat to human health worldwide, and the situation has worsened owing to the gradual increase in antibiotic-resistant bacteria caused by the improper use of antibiotics. To reduce the use of antibiotics and avoid the increase in antibiotic-resistant bacteria, researchers are increasingly paying attention to  photodynamic therapy, which uses light to produce reactive oxygen species to kill bacteria. Treating bacteria-infected wounds by photodynamic therapy requires fixing the photosensitizer (PS) at the wound site and maintaining a certain level of wound humidity. Hydrogels are materials with a high water content and are well suited for fixing PSs at wound sites for antibacterial photodynamic therapy. Therefore, hydrogels are often loaded with PSs for treating bacteria-infected wounds via antibacterial photodynamic therapy. In this review, we systematically summarised the antibacterial mechanisms and applications of PS-loaded hydrogels for treating bacteria-infected wounds via photodynamic therapy. In addition, the recent  studies and the research status progresses of novel antibacterial hydrogels are discussed. Finally, the challenges and future prospects of PS-loaded hydrogels are reviewed.

Cationized orthogonal triad as a photosensitizer with enhanced synergistic antimicrobial activity

Single-molecule-based synergistic phototherapy holds great potential for antimicrobial treatment. Herein, we report an orthogonal molecular cationization strategy to improve the reactive oxygen species (ROS) and hyperthermia generation of heptamethine cyanine (Cy7) for photodynamic and photothermal treatments of bacterial infections. Cationic pyridine (Py) is introduced at the meso‑position of the asymmetric Cy7 with intramolecular charge transfer (ICT) to construct an atypical electron-transfer triad, which reduces ΔES1-S0, circumvents rapid charge recombination, and simultaneously enhances intersystem crossing (ISC) based on spin-orbit charge-transfer ISC (SOCT-ISC) mechanism. This unique molecular construction produces anti-Stokes luminescence (ASL) because the rotatable CN bond enriched in high vibrational-rotational energy levels improves hot-band absorption (HBA) efficiency. The obtained triad exhibits higher singlet oxygen quantum yield and photothermal conversion efficiency compared to indocyanine green (ICG) under irradiation above 800 nm. Cationization with Py enables the triad to target bacteria via intense electrostatic attractions, as well as biocidal property against a broad spectrum of bacteria in the dark. Moreover, the triad under irradiation can enhance biofilm eradication performance in vitro and statistically improve healing efficacy of MRSA-infected wound in mice. Thus, this work provides a simple but effective strategy to design small-molecule photosensitizers for synergistic phototherapy of bacterial infections. STATEMENT OF SIGNIFICANCE: We developed an orthogonal molecular cationization strategy to enhance the reactive oxygen species and thermal effects of heptamethine cyanine (Cy7) for photodynamic and photothermal treatments of bacterial infections. Specifically, cationic pyridine (Py) was introduced at the meso‑position of the asymmetric Cy7 to construct an atypical electron-transfer triad, which reduced ΔES1-S0, circumvented rapid charge recombination, and simultaneously enhanced intersystem crossing (ISC). This triad, with a rotatable CN bond, produced anti-Stokes luminescence due to hot-band absorption. The triad enhanced antimicrobial performance and statistically improved the healing efficacy of MRSA-infected wounds in mice. This site-specific cationization strategy may provide insights into the design of small molecule-based photosensitizers for synergistic phototherapy of bacterial infections.

Meso pyridinium BODIPY-based long wavelength infrared mitochondria-targeting fluorescent probe with high photostability

Mito-tracker deep red (MTDR) as a commercially available mitochondria-targeting probe was easily bleached upon imaging. We designed and synthesized a family of meso-pyridinium BODIPY and introduced lipophilic methyl or benzyl as the head moiety to develop a mitochondria-targeting deep red probe. Moreover, we changed the substitution of the 3,5-phenyl moieties with the methoxy or methoxyethoxyethyl group to balance hydrophilicity. The designed BODIPY dyes possessed long absorption and good fluorescence emission. Among them, meso ortho-pyridinium BODIPYs with benzyl head and glycol substitution on phenyl moiety (3h) with favorable Stokes shift were found to have the best mitochondrial targeting performance. 3h was easily uptaken by cells and was less toxic and more photostable than MTDR. An immobilizable probe (3i) was further developed, and nice mitochondria targeting properties under the damaging condition of mitochondria membrane potential were maintained. BODIPY 3h or 3i may become alternative long-wavelength mitochondria targeting probes apart from MTDR and be suitable for long-term mitochondrial tracking studies.

Fabrication of BODIPY/polyvinyl alcohol/alkaline lignin antibacterial composite films for food packing

Foodborne pathogens seriously endanger people's health and cause significant economic losses. Therefore, it is of great significance to design potent packaging materials with the function of alleviating food spoiling and extending shelf life. Here, three BODIPY derivatives (named as N-BDPI, B-BDPI and P-BDPI) were synthesized by substituting the 8-position of BODIPY with naphthalene, biphenyl and pyridine groups, respectively, and their photophysical properties as well as antibacterial capacities were characterized. The results demonstrated that N-BDPI had the best singlet oxygen generation ability and could completely kill S. aureus under light irradiation with the minimum inhibitory concentration of only 50 nmol/L. In addition, 1.0% BDPI@PVA/AL composite film was fabricated by doping N-BDPI into polyvinyl alcohol (PVA) and alkaline lignin (AL) exhibited high antibacterial activity on Gram-positive bacteria. The coating of strawberries with 1.0% BDPI@PVA/AL film not only effectively inhibited the mildew of strawberries, but also extended their shelf life.

BODIPY as a Multifunctional Theranostic Reagent in Biomedicine: Self-Assembly, Properties, and Applications

The use of boron dipyrromethene (BODIPY) in biomedicine is reviewed. To open, its synthesis and regulatory strategies are summarized, and inspiring cutting-edge work in post-functionalization strategies is highlighted. A brief overview of assembly model of BODIPY is then provided: BODIPY is introduced as a promising building block for the formation of single- and multicomponent self-assembled systems, including nanostructures suitable for aqueous environments, thereby showing the great development potential of supramolecular assembly in biomedicine applications. The frontier progress of BODIPY in biomedical application is thereafter described, supported by examples of the frontiers of biomedical applications of BODIPY-containing smart materials: it mainly involves the application of materials based on BODIPY building blocks and their assemblies in fluorescence bioimaging, photoacoustic imaging, disease treatment including photodynamic therapy, photothermal therapy, and immunotherapy. Lastly, not only the current status of the BODIPY family in the biomedical field but also the challenges worth considering are summarized. At the same time, insights into the future development prospects of biomedically applicable BODIPY are provided.

Improving the Management and Treatment of Diabetic Foot Infection: Challenges and Research Opportunities

Diabetic foot infection (DFI) management requires complex multidisciplinary care pathways with off-loading, debridement and targeted antibiotic treatment central to positive clinical outcomes. Local administration of topical treatments and advanced wound dressings are often used for more superficial infections, and in combination with systemic antibiotics for more advanced infections. In practice, the choice of such topical approaches, whether alone or as adjuncts, is rarely evidence-based, and there does not appear to be a single market leader. There are several reasons for this, including a lack of clear evidence-based guidelines on their efficacy and a paucity of robust clinical trials. Nonetheless, with a growing number of people living with diabetes, preventing the progression of chronic foot infections to amputation is critical. Topical agents may increasingly play a role, especially as they have potential to limit the use of systemic antibiotics in an environment of increasing antibiotic resistance. While a number of advanced dressings are currently marketed for DFI, here we review the literature describing promising future-focused approaches for topical treatment of DFI that may overcome some of the current hurdles. Specifically, we focus on antibiotic-impregnated biomaterials, novel antimicrobial peptides and photodynamic therapy.

Photodynamic inactivation of Staphylococcus aureus in the presence of aggregation-prone photosensitizers based on BODIPY used at submicromolar concentrations

Two new brominated BODIPYs (1 and 2) bearing amino acid-based chains (l-valine for 1, and dimethyl-l-lysine for 2) were synthesized and characterized. In organic solvents, 1 and 2 were fully soluble and showed the photophysical properties expected for brominated BODIPY dyes, including efficient generation of singlet oxygen (¹O₂), upon irradiation. In contrast, in aqueous media, both compounds were prone to aggregation and the photo-induced generation of ¹O₂ was halted. Despite the lack of generation of this reactive species in aqueous media (in cuvette), both 1 and 2 have positive antimicrobial Photodynamic Inactivation (aPDI) effect. The activity against gram-positive Staphylococcus aureus and gram-negative Escherichia coli was determined through the inactivation curves, with a total energy dose of 5.3 J/cm² (white light LED used as an energy source). Compound 2 was highly active against both gram-positive and gram-negative bacteria (3 log CFU/mL reduction was obtained at 0.16 μM for S. aureus and 2.5-5.0 μM for E. coli), whereas 1 was less effective to kill S. aureus (3 log CFU/mL at 0.32 μM) and ineffective for E. coli. The higher efficiency of 2, as compared to 1, to reduce the population of bacteria, can reside in the presence of a protonatable residue in 2, allowing a more effective interaction of this molecule with the cell walls of the microorganisms. In order to explain the lack of reactivity in pure aqueous media (in cuvette) and the contrasting good activity in the presence of bacterial cells it can be hypothesized that upon interaction with the walls of the microorganisms, the aggregated photosensitizers suffer a disaggregation process restoring the ability to generate ¹O₂, and hence leading to efficient photodynamic activity against these pathogenic microorganisms, in agreement with the similar effect observed recently for porphyrinoid photosensitizers.

A Comparison of the Photophysical, Electrochemical and Cytotoxic Properties of meso-(2-, 3- and 4-Pyridyl)-BODIPYs and Their Derivatives

Boron dipyrromethene (BODIPY) dyes bearing a pyridyl moiety have been used as metal ion sensors, pH sensors, fluorescence probes, and as sensitizers for phototherapy. A comparative study of the properties of the three structural isomers of meso-pyridyl-BODIPYs, their 2,6-dichloro derivatives, and their corresponding methylated cationic pyridinium-BODIPYs was conducted using spectroscopic and electrochemical methods, X-ray analyses, and TD-DFT calculations. Among the neutral derivatives, the 3Py and 4Py isomers showed the highest relative fluorescence quantum yields in organic solvents, which were further enhanced 2-4-fold via the introduction of two chlorines at the 2,6-positions. Among the cationic derivatives, the 2catPy showed the highest relative fluorescence quantum yield in organic solvents, which was further enhanced by the use of a bulky counter anion (PF₆^-). In water, the quantum yields were greatly reduced for all three isomers but were shown to be enhanced upon introduction of 2,6-dichloro groups. Our results indicate that 2,6-dichloro-meso-(2- and 3-pyridinium)-BODIPYs are the most promising for sensing applications. Furthermore, all pyridinium BODIPYs are highly water-soluble and display low cytotoxicity towards human HEp2 cells.

Antifungal effect of a new photosensitizer derived from BODIPY on Candida albicans biofilms

BACKGROUND

Photodynamic therapy (PDT) has been recognized as an alternative treatment of Candida albicans (C. albicans) infections. The aim of this study was to investigate the antifungal effect of PDT mediated by a new photosensitizer (PS) derived from BODIPY (BDP-4L) on C. albicans biofilms.

METHODS

C. albicans biofilms were incubated with BDP-4L of different concentrations and then irradiated at the light doses of 1.8, 3.6, 5.4, 7.2 and 9.0 J/cm². XTT reduction assay was conducted to determine the PS concentration and PDT parameters. Confocal light scanning microscopy (CLSM) and scanning electron microscope (SEM) were used to visualize and quantify the effect of BDP-4L on C. albicans biofilms after PDT.

RESULTS

C. albicans biofilms were inactivated in light dose-dependent and PS concentration-dependent manners using BDP-4L as PS. Without irradiation, no inactivation effect was observed when PS concentrations varied from 5 μM to 80 μM. 40 μM PS with 3.6 J/cm² irradiation resulted in a significant reduction of 83.8% in biofilm metabolic activities. CLSM assay demonstrated that cell viability was obviously inhibited by 82.6%. SEM images revealed ruptured and rough cell surface, indicating increased cell membrane permeability after PDT.

CONCLUSIONS

Our results suggested that BDP-4L mediated PDT exhibited a favorable antifungal effect on C. albicans biofilms.