Side Chain Cyclized Aromatic Amino Acids: Great Tools as Local Constraints in Peptide and Peptidomimetic Design

Introduction of constrained Trp analogs in RW9 modulates structure and partition in membrane models

Over the past decades, many cell-penetrating peptides (CPP) have been studied for their capacity to cross cellular membranes, mostly in order to improve cellular uptake of therapeutic agents. Even though hydrophobic and anionic CPPs have been described, many of them are polycationic, due to the presence of several arginine (Arg) residues. Noteworthy, however, the presence of aromatic amino acids such as tryptophan (Trp) within CPPs seems to play an important role to reach high membranotropic activity. RW9 (RRWWRRWRR) is a designed CPP derived from the polyarginine R9 presenting both features. In general, when interacting with membranes, CPPs adopt an optimal conformation for membrane interactions - an amphipathic helical secondary structure in the case of RW9. Herein, we assumed that the incorporation of a locally constrained amino acid in the peptide sequence could improve the membranotropic activity of RW9, by facilitating its structuration upon contact with a membrane, while leaving a certain plasticity. Therefore, two cyclized Trp derivatives (Tcc and Aia) were synthesized to be incorporated in RW9 as surrogates of Trp residues. Thus, a series of peptides containing these building blocks has been synthesized by varying the type, position, and number of modifications. The membranotropic activity of the RW9 analogs was studied by spectrofluorescence titration of the peptides in presence of liposomes (DMPG), allowing to calculate partition coefficients (Kp). Our results indicate that the partitioning of the modified peptides depends on the type, the number and the position of the modification, with the best sequence being [Aia4]RW9. Interestingly, both NMR analysis and molecular dynamic (MD) simulations indicate that this analog presents an extended conformation similar to the native RW9, but with a much-reduced structural flexibility. Finally, cell internalization properties were also confirmed by confocal microscopy.

Conjugation as a Tool in Therapeutics: Role of Amino Acids/Peptides-Bioactive (Including Heterocycles) Hybrid Molecules in Treating Infectious Diseases

Peptide-based drugs are gaining significant momentum in the modern drug discovery, which is witnessed by the approval of new drugs by the FDA in recent years. On the other hand, small molecules-based drugs are an integral part of drug development since the past several decades. Peptide-containing drugs are placed between small molecules and the biologics. Both the peptides as well as the small molecules (mainly heterocycles) pose several drawbacks as therapeutics despite their success in curing many diseases. This gap may be bridged by utilising the so called 'conjugation chemistry', in which both the partners are linked to one another through a stable chemical bond, and the resulting conjugates are found to possess attracting benefits, thus eliminating the stigma associated with the individual partners. Over the past decades, the field of molecular hybridisation has emerged to afford us new and efficient molecular architectures that have shown high promise in medicinal chemistry. Taking advantage of this and also considering our experience in this field, we present herein a review concerning the molecules obtained by the conjugation of peptides (amino acids) to small molecules (heterocycles as well as bioactive compounds). More than 125 examples of the conjugates citing nearly 100 references published during the period 2000 to 2022 having therapeutic applications in curing infectious diseases have been covered.

Medicinal chemistry insights into antiviral peptidomimetics

The (re)emergence of multidrug-resistant viruses and the emergence of new viruses highlight the urgent and ongoing need for new antiviral agents. The use of peptidomimetics as therapeutic drugs has often been associated with advantages, such as enhanced binding affinity, improved metabolic stability, and good bioavailability profiles. The development of novel antivirals is currently driven by strategies of converting peptides into peptidomimetic derivatives. In this review, we outline different structural modification design strategies for developing novel peptidomimetics as antivirals, involving N- or C-cap terminal structure modifications, pseudopeptides, amino acid modifications, inverse-peptides, cyclization, and molecular hybridization. We also present successful recent examples of peptidomimetic designs.

Opening the amino acid toolbox for peptide-based NTS2-selective ligands as promising lead compounds for pain management

Chronic pain is one of the most critical health issues worldwide. Despite considerable efforts to find therapeutic alternatives, opioid drugs remain the gold standard for pain management. The administration of μ-opioid receptor (MOR) agonists is associated with detrimental and limiting adverse effects. Overall, these adverse effects strongly overshadow the effectiveness of opioid therapy. In this context, the development of neurotensin (NT) ligands has shown to be a promising approach for the management of chronic and acute pain. NT exerts its opioid-independent analgesic effects through the binding of two G protein-coupled receptors (GPCRs), NTS1 and NTS2. In the last decades, modified NT analogues have been proven to provide potent analgesia in vivo. However, selective NTS1 and nonselective NTS1/NTS2 ligands cause antinociception associated with hypothermia and hypotension, whereas selective NTS2 ligands induce analgesia without altering the body temperature and blood pressure. In light of this, various structure-activity relationship (SAR) studies provided findings addressing the binding affinity of ligands towards NTS2. Herein, we comprehensively review peptide-based NTS2-selective ligands as a robust alternative for future pain management. Particular emphasis is placed on SAR studies governing the desired selectivity and associated in vivo results.

Ad-hoc modifications of cyclic mimetics of SOCS1 protein: Structural and functional insights

Suppressors of cytokine signaling 1 (SOCS1) protein, a negative regulator of the Janus kinase (JAK)-signal transducer and activator of transcription (STAT) pathway, possesses a small kinase inhibitory region (KIR) involved in the inhibition of JAK kinases. Several studies showed that mimetics of KIR-SOCS1 can be potent therapeutics in several disorders (e.g., neurological, autoimmune or cardiovascular diseases). In this work, starting from a recently identified cyclic peptidomimetic of KIR-SOCS1, icPS5(Nal1), to optimize the peptide structure and improve its biological activity, we designed novel derivatives, containing crucial amino acids substitutions and/or modifications affecting the ring size. By combining microscale thermophoresis (MST), Circular Dichroism (CD), Nuclear Magnetic Resonance (NMR) and computational studies, we showed that the cycle size plays a key role in the interaction with JAK2 and the substitution of native residues with un-natural building blocks is a valid tool to maintain low-micromolar affinity toward JAK2, greatly increasing their serum stability. These findings contribute to increase the structural knowledge required for the recognition of SOCS1/JAK2 and to progress towards their conversion into more drug-like compounds.

Solvent directed chemically divergent synthesis of β-lactams and α-amino acid derivatives with chiral isothiourea

A protocol for the chemically divergent synthesis of β-lactams and α-amino acid derivatives with isothiourea (ITU) catalysis by switching solvents was developed. The stereospecific Mannich reaction occurring between imine and C(1)-ammonium enolate generated zwitterionic intermediates, which underwent intramolecular lactamization and afforded β-lactam derivatives when DCM and CH₃CN were used as solvents. However, when EtOH was used as the solvent, the intermediates underwent an intermolecular esterification reaction, and α-amino acid derivatives were produced. Detailed mechanistic experiments were conducted to prove that these two kinds of products came from the same intermediates. Furthermore, chemically diversified transformations of β-lactam and α-amino acid derivatives were achieved.

A protocol for the solvent directed chemically divergent synthesis of β-lactam and α-amino acid derivatives with chiral isothiourea was reported.

An ultrasound-assisted solvent and catalyst-free synthesis of structurally diverse pyrazole centered 1,5-disubstituted tetrazoles via one-pot four-component reaction

Abstract:

1,5-Disubstituted tetrazoles are vital drug-like scaffold usually encountered as valuable bioisosteres of cis-amide bond. In this article, we reported synthesis of some novel medicinally relevant pyrazole centered 1,5-disubstituted tetrazoles using ultrasound irradiation via a one-pot 4-C reaction from various pyrazole originated aldehyde, amine, isocyanide, and sodium azide. All the synthesized derivatives were characterized by IR, 1H NMR, 13C NMR, spectroscopic techniques, and mass analysis. This ultrasound-assisted green protocol has several advantages like mild reaction condition, high yield, catalyst and solvent-free reaction protocol, 15 minutes reaction time and easy workup.

Efficient Synthesis of Polysubstituted 1,5-Benzodiazepinone Dipeptide Mimetics via an Ugi-4CR-Ullmann Condensation Sequence

An efficient three-step synthesis towards 3-amino-1,4-benzodiazepin-2-one derivatives is presented. The versatile Ugi-4-component reaction (Ugi-4CR) and Boc deprotection is followed by a ligand-free Ullmann condensation. This protocol allows the rapid construction of a diverse array of substituted 1,5-benzodiazepinones. Since Ugi-based products are typically limited by their ‘inert’ C-terminal amides, the use of a convertible (‘cleavable’) isocyanide was envisaged and resulted in building blocks that can be made SPPS compatible. To demonstrate the potential of this novel synthetic route, the design and preparation of novel phenylurea-1,5-benzodiazepin-4(5H)-one dipeptide mimetics with potential CCK2-antagonist properties is reported.

Antagonizing S1P3 Receptor with Cell-Penetrating Pepducins in Skeletal Muscle Fibrosis

S1P is the final product of sphingolipid metabolism, which interacts with five widely expressed GPCRs (S1P_1-5). Increasing numbers of studies have indicated the importance of S1P₃ in various pathophysiological processes. Recently, we have identified a pepducin (compound KRX-725-II) acting as an S1P₃ receptor antagonist. Here, aiming to optimize the activity and selectivity profile of the described compound, we have synthesized a series of derivatives in which Tyr, in position 4, has been substituted with several natural aromatic and unnatural aromatic and non-aromatic amino acids. All the compounds were evaluated for their ability to inhibit vascular relaxation induced by KRX-725 (as S1P₃ selective pepducin agonist) and KRX-722 (an S1P₁-selective pepducin agonist). Those selective towards S1P₃ (compounds V and VII) were also evaluated for their ability to inhibit skeletal muscle fibrosis. Finally, molecular dynamics simulations were performed to derive information on the preferred conformations of selective and unselective antagonists.

δ-Valerolactamic Quaternary Amino Acid Derivatives: Enantiodivergent Synthesis and Evidence for Stereodifferentiated β-Turn-Inducing Properties

Enantiopure (R) and (S) cyclic α,α-disubstituted amino acid derivatives displaying a δ-valerolactam side chain were prepared from a common isoxazolidine precursor. The (R)-configured δ-valerolactam 11 was converted into diastereoisomeric pseudopeptides to investigate its ability to induce secondary structures in peptidomimetics. Conformational studies of these pseudopeptides were carried out in the solid state (X-ray diffraction), in solution (NMR analyses), and in silico (computer-aided conformational analysis), which demonstrated that such quaternary amino acids induce β-turn conformations stable enough to be retained in polar media (DMSO). Incorporation of this new type of α,α-disubstituted amino acid into a representative pseudopeptidic sequence by N- then C-elongation and N-debenzylation is also described herein and could serve for the synthesis of various structured peptidomimetics.

Using conformational constraints at position 6 of Angiotensin II to generate compounds with enhanced AT2R selectivity and proteolytic stability

The Renin-Angiotensin System (RAS) plays a crucial role in numerous pathological conditions. Two of the critical RAS players, the angiotensin receptors AT1R and AT2R, possess differential functional profiles, although they share high sequence similarity. Although the main focus has been placed on AT1R, several epidemiological studies have evidenced that activation of AT2R could operate as a multimodal therapeutic target for different diseases. Thus, the development of selective AT2R ligands could have a high clinical potential for different therapeutic directions. Furthermore, they could serve as a powerful tool to interrogate the molecular mechanisms that are mediated by AT2R. Based on our recently established high affinity and AT2R selective compound [Y]⁶-AII we developed several analogues through modifying aminoacids located at positions 6 and 7 with various conformationally constrained analogues to enhance both the selectivity and stability. We report the development of high-affinity AT2R binders, which displayed high selectivity for AT2R versus AT1R. Furthermore, all analogues presented enhanced stability in human plasma with respect to the parent hormone Angiotensin II as also [Y]⁶-AII.

New approaches towards the synthesis of 1,2,3,4-tetrahydro isoquinoline-3-phosphonic acid (TicP)

Two new strategies for the efficient synthesis of racemic 1,2,3,4-tetrahydroisoquinoline-3-phosphonic acid (Tic^P) (±)-2 have been developed. The first strategy involves the electron-transfer reduction of the easily obtained α,β-dehydro phosphonophenylalanine followed by a Pictet-Spengler cyclization. The second strategy involves a radical decarboxylation-phosphorylation reaction on 1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid (Tic). In both strategies, the highly electrophilic N-acyliminium ion is formed as a key intermediate, and the target compound is obtained in good yield using mild reaction conditions and readily available starting materials, complementing existing methodologies and contributing to the easy accessibility of (±)-2 for further research.

Constraining the Side Chain of C-Terminal Amino Acids in Apelin-13 Greatly Increases Affinity, Modulates Signaling, and Improves the Pharmacokinetic Profile

Side-chain-constrained amino acids are useful tools to modulate the biological properties of peptides. In this study, we applied side-chain constraints to apelin-13 (Ape13) by substituting the Pro12 and Phe13 positions, affecting the binding affinity and signaling profile on the apelin receptor (APJ). The residues 1Nal, Trp, and Aia were found to be beneficial substitutions for Pro12, and the resulting analogues displayed high affinity for APJ (K_i 0.08-0.18 nM vs Ape13 K_i 0.7 nM). Besides, constrained (d-Tic) or α,α-disubstituted residues (Db_zg; d-α-Me-Tyr(OBn)) were favorable for the Phe13 position. Compounds 47 (Pro12-Phe13 replaced by Aia-Phe, K_i 0.08 nM) and 53 (Pro12-Phe13 replaced by 1Nal-Db_zg, K_i 0.08 nM) are the most potent Ape13 analogues activating the Gα₁₂ pathways (53, EC₅₀ Gα₁₂ 2.8 nM vs Ape13, EC₅₀ 43 nM) known to date, displaying high affinity, resistance to ACE2 cleavage as well as improved pharmacokinetics in vitro (t_1/2 5.8-7.3 h in rat plasma) and in vivo.

1,3-Dipolar Cycloaddition between Dehydroalanines and C,N-Cyclic Azomethine Imines: Application to Late-Stage Peptide Modification

A non-catalytic, mild, and easy-to-handle protecting group switched 1,3-dipolar cycloaddition (1,3-DC) between bi- or mono-N-protected Dha and C,N-cyclic azomethine imines, which afford various quaternary amino acids with diverse scaffolds, is disclosed. Specifically, normal-electron-demand 1,3-DC reaction occurs between bi-N-protected Dha and C,N-cyclic azomethine imines, while inverse-electron-demand 1,3-DC reaction occurs between mono-N-protected Dha and C,N-cyclic azomethine imines. Above all, the reactions can be carried out between peptides with Dha residues at the position of interest and C,N-cyclic azomethine imines, both in homogeneous phase and on resins in SPPS. It provides a new toolkit for late-stage peptide modification, labeling, and peptide-drug conjugation. To shed light on the high regioselectivity of the reaction, DFT calculations were carried out, which were qualitatively consistent with the experimental observations.

Peptidomimetic toolbox for drug discovery

The art of transforming peptides into drug leads is still a dynamic and fertile field in medicinal chemistry and drug discovery. Peptidomimetics can respond to peptide limitations by displaying higher metabolic stability, good bioavailability and enhanced receptor affinity and selectivity. Various synthetic strategies have been developed over the years in order to modulate the conformational flexibility and the peptide character of peptidomimetic compounds. This tutorial review aims to outline useful tools towards peptidomimetic design, spanning from local modifications, global restrictions and the use of secondary structure mimetics. Selected successful examples of each approach are presented to document the relevance of peptidomimetics in drug discovery.

Genetically Encoded Cyclic Peptide Libraries: From Hit to Lead and Beyond

With the increasing utilization of high-throughput screening for lead identification in drug discovery, the need for easily constructed and diverse libraries which cover significant chemical space is greater than ever. Cyclic peptides address this need; they combine the advantageous properties of peptides (ease of production, high diversity, high potential specificity) with increased resistance to proteolysis and often increased biological activity (due to conformational locking). There are a number of techniques for the generation and screening of cyclic peptide libraries. As drug discovery moves toward tackling challenging targets, such as protein-protein interactions, cyclic peptide libraries are expected to continue producing hits where small molecule libraries may be stymied. However, it is important to design robust systems for the generation and screening of these large libraries, and to be able to make sense of structure-activity relationships in these highly variable scaffolds. There are a plethora of possible modifications that can be made to cyclic peptides, which is both a weakness and a strength of these scaffolds; high variability will allow more precise tuning of leads to targets, but exploring the whole range of modifications may become an overwhelming challenge.

Electrochemical strategies for C-H functionalization and C-N bond formation

Conventional methods for carrying out carbon-hydrogen functionalization and carbon-nitrogen bond formation are typically conducted at elevated temperatures, and rely on expensive catalysts as well as the use of stoichiometric, and perhaps toxic, oxidants. In this regard, electrochemical synthesis has recently been recognized as a sustainable and scalable strategy for the construction of challenging carbon-carbon and carbon-heteroatom bonds. Here, electrosynthesis has proven to be an environmentally benign, highly effective and versatile platform for achieving a wide range of nonclassical bond disconnections via generation of radical intermediates under mild reaction conditions. This review provides an overview on the use of anodic electrochemical methods for expediting the development of carbon-hydrogen functionalization and carbon-nitrogen bond formation strategies. Emphasis is placed on methodology development and mechanistic insight and aims to provide inspiration for future synthetic applications in the field of electrosynthesis.

χ-Space Screening of Dermorphin-Based Tetrapeptides through Use of Constrained Arylazepinone and Quinolinone Scaffolds

Herein, the synthesis of novel conformationally constrained amino acids, 4-amino-8-bromo-2-benzazepin-3-one (8-Br-Aba), 3-amino-3,4-dihydroquinolin-2-one, and regioisomeric 4-amino-naphthoazepinones (1- and 2-Ana), is described. Introduction of these constricted scaffolds into the N-terminal tetrapeptide of dermorphin (i.e., H-Tyr-d-Ala-Phe-Gly-NH₂) induced significant shifts in binding affinity, selectivity, and in vitro activity at the μ- and δ-opioid receptors (MOP and DOP, respectively). A reported constrained μ-/δ-opioid lead tetrapeptide H-Dmt-d-Arg-Aba-Gly-NH₂ was modified through application of various constrained building blocks to identify optimal spatial orientations in view of activity at the opioid receptors. Interestingly, when the aromatic moieties were turned toward the C-terminus of the peptide sequences, (partial) (ant)agonism at MOP and weak (ant)agonism at DOP were noticed, whereas the incorporation of the 1-Ana residue led toward balanced low nanomolar MOP/DOP binding and in vitro agonism.

Diversity of Secondary Structure in Catalytic Peptides with β-Turn-Biased Sequences

X-ray crystallography has been applied to the structural analysis of a series of tetrapeptides that were previously assessed for catalytic activity in an atroposelective bromination reaction. Common to the series is a central Pro-Xaa sequence, where Pro is either l- or d-proline, which was chosen to favor nucleation of canonical β-turn secondary structures. Crystallographic analysis of 35 different peptide sequences revealed a range of conformational states. The observed differences appear not only in cases where the Pro-Xaa loop-region is altered, but also when seemingly subtle alterations to the flanking residues are introduced. In many instances, distinct conformers of the same sequence were observed, either as symmetry-independent molecules within the same unit cell or as polymorphs. Computational studies using DFT provided additional insight into the analysis of solid-state structural features. Select X-ray crystal structures were compared to the corresponding solution structures derived from measured proton chemical shifts, 3J-values, and 1H-1H-NOESY contacts. These findings imply that the conformational space available to simple peptide-based catalysts is more diverse than precedent might suggest. The direct observation of multiple ground state conformations for peptides of this family, as well as the dynamic processes associated with conformational equilibria, underscore not only the challenge of designing peptide-based catalysts, but also the difficulty in predicting their accessible transition states. These findings implicate the advantages of low-barrier interconversions between conformations of peptide-based catalysts for multistep, enantioselective reactions.