Regioselective 2,2,2-Trifluoroethylation of Imidazopyridines by Visible Light Photoredox Catalysis

Trifluoroethylation and Pentafluoropropylation of C(sp3)-H Bonds

Polyfluorinated substituents often enhance effectiveness, improve the stability within metabolic processes, and boost the lipophilicity of biologically active compounds. However, methods for their introduction into aliphatic carbon chains remain very limited. A potentially general route to integrate the fluorinated scaffolds into organic molecules involves insertion of fluorine-containing carbenes into C(sp3)-H bonds. The electron-withdrawing characteristics of perfluoroalkyl groups enhances the reactivity of these carbenes which should enable the functionalization of unactivated C(sp3)-H bonds. Curiously, it appears that use of perfluoroalkyl-containing carbenes in alkane C-H functionalization is exceedingly rare. This concept describes photolysis, enzymatic catalysis, and transition metal catalysis as three primary approaches to C(sp3)-H functionalization by trifluoromethylcarbene and its homologues.

Synthesis and site selective C-H functionalization of imidazo-[1,2-a]pyridines

Imidazo[1,2-a]pyridine has attracted much interest in drug development because of its potent medicinal properties, therefore the discovery of novel methods for its synthesis and functionalization continues to be an exciting area of research. Although transition metal catalysis has fuelled the most significant developments, extremely beneficial metal-free approaches have also been identified. Even though pertinent reviews focused on imidazo[1,2-a]pyridine synthesis, properties (physicochemical and medicinal), and functionalization at the C3 position have been published, none of these reviews has focused on the outcomes obtained in the field of global ring functionalization. We wish here to describe a brief synthesis and an overview of all the functionalization reactions at each carbon atom, viz, C2, C3, C5, C6, C7 and C8 of this scaffold, divided into sections based on site-selectivity and the type of functionalization methods used.

"Sandwich" Diimine-Copper Catalyzed Trifluoroethylation and Pentafluoropropylation of Unactivated C(sp3 )-H Bonds by Carbene Insertion

We report here "sandwich"-diimine copper complex-catalyzed trifluoroethylation and pentafluoropropylation of unactivated C(sp3 )-H bonds in alkyl esters, halides, and protected amines by employing CF3 CHN2 and CF3 CF2 CHN2 reagents. Reactions proceed in dichloromethane solvent at room temperature. Identical C-H functionalization conditions and stoichiometries are employed for generality and convenience. Selectivities for C-H insertions are higher for compounds possessing stronger electron-withdrawing substituents. Preliminary mechanistic studies point to a mechanism involving a pre-equilibrium forming a "sandwich"-diimine copper-CF3 CHN2 complex followed by rate-determining loss of nitrogen affording the reactive copper carbene. It reacts with trifluoromethyldiazomethane about 6.5 times faster than with 1-fluoroadamantane explaining the need for slow addition of the diazo compound.

Visiblelight-induced ternary electron donor-acceptor complex enabled synthesis of 2-(2-hydrazinyl) thiazole derivatives and the assessment of their antioxidant and antidiabetic therapeutic potential

A mild and eco-friendly visible-light-induced synthesis of 2-(2-hydrazinyl) thiazole from readily accessible thiosemicarbazide, carbonyl, and phenacyl bromide in the absence of a metal catalyst and/or any extrinsic photosensitizer is reported. This approach only requires a source of visible light and a green solvent at room temperature to produce the medicinally privileged scaffolds of hydrazinyl-thiazole derivatives in good to outstanding yields. Experimental studies support the in situ formation of a visible-light-absorbing, photosensitized colored ternary EDA complex. The next step is to prepare a pair of radicals in an excited state, which makes it easier to prepare thiazole derivatives through a SET and PCET process. DFT calculations additionally supported the mechanistic analysis of the course of the reaction. The antioxidant and antidiabetic properties of some of the compounds in the synthesized library were tested in vitro. All the investigated compounds demonstrated appreciable antioxidant activity, as evidenced by the reducing power experiment and the IC₅₀ values of the DPPH radical scavenging experiment. Furthermore, the IC₅₀ values for 4c, 4d, and 4g also demonstrated a strong α-amylase inhibitory effect.

Metal-Free Electrochemical Oxidative Difluoroethylation/Cyclization of Olefinic Amides To Construct Difluoroethylated Azaheterocycles

A new strategy of electrochemical oxidative difluoroethylation to generate difluoroethyl radical with sodium difluoroethylsulfinate (DFES-Na) has been reported for the first time. The method allows quick access to a variety of valuable difluoroethylated azaheterocycles including oxindoles and isoquinoline-1,3-diones via radical tandem difluoroethylation/cyclization in moderate to good yields. The electrochemical cyclopropyldifluoromethylation of N-arylacrylamides also works well using this strategy. Moreover, radical capture and cyclic voltammetry (CV) experiments are also carried out to determine the proposed mechanism.

Iodine-Catalyzed Multicomponent Synthesis of Highly Fluorescent Pyrimidine-Linked Imidazopyridines

Herein, we report a metal-free one-pot three-component reaction of aryl methyl ketones, 2-aminopyridines, and barbituric acids for the synthesis of pyrimidine-linked imidazopyridines using a catalytic amount of molecular iodine in DMSO medium. This process involves a one-pot C-H oxidation, followed by the formation of one C-C and two C-N bonds. A wide variety of aryl methyl ketones and 2-aminopyridines were found to be suitable for this methodology. The UV and fluorescence properties of the synthesized products were studied in water and DMSO media. Most of the synthesized products exhibited very good to excellent fluorescence quantum yield. Among all the products, compounds 4p and 4q showed the maximum fluorescence quantum yield (0.36) in water medium under basic conditions and compound 4c showed the maximum fluorescence quantum yield (0.75) in DMSO medium.

Recent Developments in the Photochemical Synthesis of Functionalized Imidazopyridines

Imidazopyridines constitute one of the most important scaffolds in medicinal chemistry, as their skeleton could be found in a myriad of biologically active molecules. Although numerous strategies were elaborated for imidazopyridine preparation in the 2010s, novel eco-compatible synthetic approaches have emerged, conscious of climate change concerns. In this framework, photochemical methods have been promoted to conceive this heterocyclic motif over the last decade. This review covers the recently published works on synthesizing highly functionalized imidazopyridines by light induction.

Visible Light Mediated, Catalyst Free, One-Pot Convenient Synthesis of Dihydropyridines

:

A simple, efficient and green protocol has been developed for the synthesis of polysubstituted dihydropyridines via one-pot, four-component reaction of aldehydes, arylamines, dialkyl acetylenedicarboxylate, and malononitrile. The reaction was proceeded at room temperature in the absence of catalyst in aqueous ethyl lactate under visible light irradiation. The main advantages of the present approach are mild reaction condition, high yield, no column chromatography, clean reaction profile, environmentally friendly and sustainable from the economic point of view

Visible-light-promoted direct C3-trifluoromethylation and perfluoroalkylation of imidazopyridines

An efficient method for direct trifluoromethylation and perfluoroalkylation at C3 of imidazopyridines through visible light-promoted C-H bond functionalization was developed. Under the irradiation of a blue LED, a series of C3-perfluoroalkyl-substituted imidazopyridines were synthesized from the corresponding imidazopyridines and perfluoroalkyl iodides in moderate to good yields at room temperature. It should be mentioned that this reaction proceeded in the absence of any transition-metal catalyst, oxidant and photocatalyst.

Photoredox-Catalyzed C-H Functionalization Reactions

The fields of C-H functionalization and photoredox catalysis have garnered enormous interest and utility in the past several decades. Many different scientific disciplines have relied on C-H functionalization and photoredox strategies including natural product synthesis, drug discovery, radiolabeling, bioconjugation, materials, and fine chemical synthesis. In this Review, we highlight the use of photoredox catalysis in C-H functionalization reactions. We separate the review into inorganic/organometallic photoredox catalysts and organic-based photoredox catalytic systems. Further subdivision by reaction class-either sp² or sp³ C-H functionalization-lends perspective and tactical strategies for use of these methods in synthetic applications.

Z-Selective Pd-catalyzed 2,2,2-trifluoroethylation of acrylamides at room temperature

A straightforward 2,2,2-trifluoroethylation of acrylamides by Pd-catalyzed C-H bond activation was reported by using a fluorinated hypervalent iodine reagent as a coupling partner. At room temperature, this additive-free approach allowed the synthesis of Z-2,2,2-trifluoroethylated acrylamides (19 examples, up to 73% yield) in a stereoselective manner. Under these mild reaction conditions, the methodology turned out to be functional group tolerant and mechanistic studies gave us a better understanding of the transformation.

Visible-Light-Mediated Oxidative Amidation of Aldehydes by Using Magnetic CdS Quantum Dots as a Photocatalyst

A magnetic CdS quantum dot (Fe₃ O₄ /polydopamine (PDA)/CdS) was synthesized through a facile and convenient method from inexpensive starting materials. Characterization of the prepared catalyst was performed by means of FTIR spectroscopy, XRD, SEM, TEM, energy-dispersive X-ray spectroscopy, and vibrating-sample magnetometer techniques. Fe₃ O₄ /PDA/CdS was found to be a highly active photocatalyst for the amidation of aromatic aldehydes by using air as a clean oxidant under mild conditions. The photocatalyst can be recovered by magnetic separation and successfully reused for five cycles without considerable loss of its catalytic activity.

Visible-Light-Induced Direct Csp2-H Radical Trifluoroethylation of Coumarins with 1,1,1-Trifluoro-2-iodoethane (CF3CH2I)

Herein, we developed the first visible-light-induced direct Csp²-H radical 2,2,2-trifluoroethylation of coumarins with commercially available and cheap reagent CF₃CH₂I at room temperature. This transformation proceeded smoothly under mild conditions and showed excellent functional group compatibility. The synthetic value of the protocol was also demonstrated by the successful functionalization of several pharmaceuticals.

Functionalization of imidazo[1,2-a]pyridines via radical reactions

The recent advances in radical reactions for the direct functionalization of imidazo[1,2-a]pyridines are reviewed.

Catalyst-free, visible-light-induced direct radical cross-coupling perfluoroalkylation of the imidazo[1,2-a]pyridines with perfluoroalkyl iodides

A mild and eco-friendly visible-light-induced direct radical cross-coupling perfluoroalkylation of the imidazo[1,2-a]pyridines with perfluoroalkyl iodides was established.

Copper-catalyzed one-pot synthesis of 2-(2,2,2-trifluoroethyl)-substituted benzofused heterocycles

A method for copper-catalyzed synthesis of 2-trifluoroethyl-substituted benzofurans and indoles from the reaction of salicylaldehyde/2-aminobenzaldehyde p-tosylhydrazones with 2-bromo-3,3,3-trifluoropropene has been developed.

Eosin Y-Catalyzed Synthesis of 3-Aminoimidazo[1,2-a]Pyridines via the HAT Process under Visible Light through Formation of the C-N Bond

A comfortable, environment-friendly, and metal-free approach for synthesizing the biologically important moiety aminoimidazopyridine through the multicomponent reaction of benzylamine, 2-aminopyridine, and t-butyl isocyanide under visible light using eosin Y as a photocatalyst has been developed. Inexpensive, nontoxic, the effortless accessibility of starting materials, and nonparticipation of particular glassware and a photoreactor system are important qualities of the current approach. Strangely, the mild conditions, environment-friendly, and enumerating tolerance of an extensive range of both electron-donating and electron-withdrawing groups are additional features of the approach.

Visible-Light-Induced Regio- and Stereoselective C(sp2)-H Trifluoroethylation of Enamides with 2,2,2-Trifluoroethyl Iodide

A photoredox-catalyzed regio- and stereoselective trifluoroethylation reaction of enamides using commercially available 2,2,2-trifluoroethyl iodide as trifluoroethylating agents has been developed, furnishing geometrically defined and synthetically and physiochemically pivotal β-trifluoroethylated enamides bearing a diverse range of functional groups.

Visible light promoted C–H functionalization of imidazoheterocycles

The present review summarizes the visible light mediated direct C–H functionalizations of pharmacologically active imidazo[1,2-a]pyridines and other related heterocycles.

Visible-Light-Initiated One-Pot, Three-Component Synthesis of 2-Amino-4H-pyran-3,5-dicarbonitrile Derivatives

A novel approach for the visible-light-initiated synthesis of 2-amino-4H-pyran-3,5-dicarbonitrile derivatives via a one-pot, three-component reaction of aldehydes or isatins, malononitrile, and α-cyano ketones has been developed. The reaction was carried out at room temperature in ethanol/water to give the corresponding products with a wide range of functional groups in high yields. This process did not require any additives or chromatographic separation and could be applied for gram-scale synthesis.

Denitrogenative Hydrotrifluoromethylation of Benzaldehyde Hydrazones: Synthesis of (2,2,2-Trifluoroethyl)arenes

Reacting hydrazones of arylaldehydes with Togni's CF₃ -benziodoxolone reagent, in the presence of potassium hydroxide and cesium fluoride, induces a denitrogenative hydrotrifluoromethylation event to produce (2,2,2-trifluoroethyl)arenes. This novel reaction was tolerant to many electronically-diverse functional groups and substitution patterns, as well as naphthyl- and heteroaryl-derived substrates. Advantages of this process include the easy access to hydrazone precursors on a large scale, speed and operational simplicity, and being transition metal-free.

Visible-light-induced radical trifluoromethylthiolation of N-(o-cyanobiaryl)acrylamides

An efficient and general visible-light-mediated trifluoromethylthiolation of N-(o-cyanobiaryl)acrylamides has been successfully accomplished using N-trifluoromethylthiosaccharin as an effective source of SCF3 radicals. The reaction was proposed to proceed via a domino radical trifluoromethylthiolation/cyano insertion/cyclization to afford the corresponding SCF3-containing ring-fused phenanthridine derivatives in moderate to good yields.

Elemental sulfur-promoted one-pot synthesis of 2-(2,2,2-trifluoroethyl)benzoxazoles and their derivatives

An elemental sulfur promoted one-pot synthesis of 2-(2,2,2-trifluoroethyl)benzoxazole derivatives from the reaction of o-aminophenols, thiols, and anilines with 2-bromo-3,3,3-trifluoropropene is reported.