Extended Triangulenium Ions: Syntheses and Characterization of Benzo-Bridged Dioxa- and Diazatriangulenium Dyes

Investigating Design Rules for Photoinduced Electron Transfer Quenching in Triangulenium Probes

Fluorescent probes based on photoinduced electron transfer (PET) quenching of long lifetime triangulenium fluorophores have found multiple applications. For such probes a successful design relies on the right balance between the rate of PET quenching and fluorescence. In a series of ADOTA (A) and DAOTA (D) triangulenium fluorophores appended with aniline-like quencher moieties, we have investigated the rate of quenching and its relation to thermodynamic driving force, distance, and conjugation within the quencher moiety. Three different quenchers, a short (1), a long (2), and a long twisted (3), 4-aminophenyl, 4'-aminobiphenyl, and 2,2'-dimethyl-4'-aminobiphenyl, respectively were investigated. Steady-state spectroscopy and electrochemistry confirms that the quencher moieties are electronically decoupled from the dyes and have similar oxidation potentials and thus driving force for PET quenching, irrespectively of their different length and conjugation. Time-resolved fluorescence measurement was used to measure the fast PET quenching, with rate constant kPET ranging from >4×1011 to 2×109  s-1 . Interestingly, PET quenching is equally efficient/fast from 1 and 2, even with increase in distance between the donor and the acceptor. However, when twisting the biphenyl in 3, a 20-fold decrease in quenching is found. Even with this decrease in kPET, the quenching in 3 A/D is still highly efficient, with nearly 99 % quenching. The study show that long lifetime fluorophores can be efficiently switched even by relatively slow PET processes and that PET quencher moieties can be removed far from the fluorophore if conjugated linkers are applied.

Acetylene Derivatives of Cationic Diazaoxatriangulenes and Diaza [4]Helicenes ‐ Access to Red Emitters and Planar Chiral Stereochemical Traits

Cationic triangulenes, and related helicenes, constitute a rich class of dyes and fluorophores, usually absorbing and emitting light at low energy, in the orange to red domains. Recently, to broaden the scope of applications, regioselective late‐stage functionalizations on these core moieties have been developed. For instance, with the introduction of electron‐donating groups (EDGs), important bathochromic shifts are observed pushing absorptions towards or in the near‐infrared (NIR) spectral domain while emissive properties disappear essentially completely. Herein, to upset this drawback, acetylene derivatives of cationic diazaoxa triangulenes (DAOTA) and [4]helicenes are prepared (16 examples). Contrary to other EDG‐functionalized derivatives, C≡C− functionalized products remain broadly fluorescent, with red‐shifted absorptions (Δλ_abs up to 25 nm) and emissions (Δλ_em up to 73 nm, Φ_PL up to 51 %). Quite interestingly, a general dynamic stereoisomerism phenomenon is evidenced for the compounds derived from achiral DAOTA cores. At low temperature in ¹H NMR spectroscopy (218 K), N−CH₂ protons become diastereotopic with chemical shifts differences (Δδ) as high as +1.64 ppm. The signal coalescence occurs around 273 K with a barrier of ∼12 kcal mol⁻¹. This phenomenon is due to planar chiral conformations (S_p and R_p configurations), induced by the geometry of the alkyl (n‐propyl) side‐chains next to the acetylenic substituents. Ion pairing studies with Δ‐TRISPHAT anion not only confirm the occurrence of the chiral conformations but evidence a moderate but definite asymmetric induction from the chiral anion onto the cations. Finally, DFT calculations offer a valuable insight on the geometries, the corresponding stereodynamics and also on the very large difference in NMR for some of the diastereotopic protons.

Recent Advances in Heterocyclic Nanographenes and Other Polycyclic Heteroaromatic Compounds

This review surveys recent progress in the chemistry of polycyclic heteroaromatic molecules with a focus on structural diversity and synthetic methodology. The article covers literature published during the period of 2016-2020, providing an update to our first review of this topic (Chem. Rev. 2017, 117 (4), 3479-3716).

Utilizing Selective Chlorination to Synthesize New Triangulenium Dyes

Functionalization of new sites on the triangulenium structure has been achieved by early-stage chlorination with N-chlorosuccinimide (NCS), giving rise to two new triangulenium dyes (1 and 3). By introducing the chlorine functionalities in the acridinium precursor, positions complementary to those previously obtained by electrophilic aromatic substitution on the final dyes are accessed. The chlorination is selective, giving only one regioisomer for both mono- and dichlorination products. For the monochlorinated acridinium compound, a highly selective ring-closing reaction was discovered, generating a single regioisomer of the cationic [4]helicene product. Further investigations into the mechanism of the [4]helicene formation lead to the first isolation of the previously proposed intermediate of the two-step S_NAr reaction, key to all aza-bridged triangulenium and helicenium systems. Late-stage functionalization of DAOTA⁺ with NCS gave rise to a different dichlorinated compound (2). The fully ring closed chlorinated triangulenium dyes 1, 2, and 3 show a redshift in absorption and emission, while maintaining relatively high fluorescence quantum yields of 36%, 26%, and 41% and long fluorescence lifetimes of 15, 12.5, and 16 ns, respectively. Cyclic voltammetry shows that chlorination of the triangulenium dyes significantly lowers reduction potentials and thus allows for efficient tuning of redox and photoredox properties.

Assessing The Key Photophysical Properties of Triangulenium Dyes for DNA Binding by Alteration of the Fluorescent Core

Four-stranded G-quadruplex (G4) DNA is a non-canonical DNA topology that has been proposed to form in cells and play key roles in how the genome is read and used by the cellular machinery. Previously, a fluorescent triangulenium probe (DAOTA-M2) was used to visualise G4s in cellulo, thanks to its distinct fluorescence lifetimes when bound to different DNA topologies. Herein, the library of available triangulenium probes is expanded to explore how modifications to the fluorescent core of the molecule affect its photophysical characteristics, interaction with DNA and cellular localisation. The benzo-bridged and isopropyl-bridged diazatriangulenium dyes, BDATA-M2 and CDATA-M2 respectively, featuring ethyl-morpholino substituents, were synthesised and characterised. The interactions of these molecules with different DNA topologies were studied to determine their binding affinity, fluorescence enhancement and fluorescence lifetime response. Finally, the cellular uptake and localisation of these optical probes were investigated. Whilst structural modifications to the triangulenium core only slightly alter the binding affinity to DNA, BDATA-M2 and CDATA-M2 cannot distinguish between DNA topologies through their fluorescence lifetime. It is argued theoretically and experimentally that this is due to reduced effectiveness of photoinduced electron transfer (PET) quenching. This work presents valuable new evidence into the critical role of PET quenching when using the fluorescence lifetime of triangulenium dyes to discriminate G4 DNA from duplex DNA, highlighting the importance of fine tuning redox and spectral properties when developing new triangulenium-based G4 probes.

What is Best Strategy for Water Soluble Fluorescence Dyes?-A Case Study Using Long Fluorescence Lifetime DAOTA Dyes*

The lipophilic nature of organic dyes complicates their effectiveness in aqueous solutions. In this work we investigate three different strategies for achieving water-solubility of the diazaoxatriangulenium (DAOTA⁺ ) chromophore: hydrophilic counter ions, aromatic sulfonation of the chromophore, and attachment of charged side chains. The long fluorescence lifetime (FLT, τ_f =20 ns) of DAOTA⁺ makes it a sensitive probe to analyze solvation and aggregation effects. Direct sulfonation of the chromophore was found to increase solubility drastically, but at the cost of greatly reduced quantum yields (QYs) due to enhanced non-radiative deactivation processes. The introduction of either cationic (4) or zwitterionic side chains (5), however, brings the FLT (τ_f =18 ns) and QY (ϕ_f =0.56) of the dye to the same level as the parent chromophore in acetonitrile. Time-resolved fluorescence spectroscopy also reveals a high resistance to aggregation and non-specific binding in a high loading of bovine serum albumin (BSA). The results clearly show that addition of charged flexible side chains is preferable to direct sulfonation of the chromophore core.

Triangulenium dyes: the comprehensive photo-absorption and emission story of a versatile family of chromophores

The triangulenium dyes constitute a family of versatile chromophores whose impressive photo-absorption and emission properties are currently highlighted in numerous novel experimental applications. In this investigation, we provide a comprehensive TDDFT characterization of their spectroscopic properties elucidating the origin of their large and complex absorption and emission vibronic spectra spread over the (whole) visible region. More precisely, by benchmarking the performance of 10 commonly-used exchange-correlation density functionals belonging to different classes of approximation, we develop and validate a computational protocol allowing the accurate modeling of both the position and optical line-shape of their vibrationally-resolved absorption and emission band structures. We find that semilocal approximations provide the best estimate of the structure of the vibronic spectra, however they spuriously and strongly underestimate their position. We finally show that global-hybrid density functionals mixing between 20 and 30% of exact-like exchange are an excellent compromise to get a satisfactory estimate of both of these properties.

Synthesis, Resolution, Configurational Stability, and Properties of Cationic Functionalized [5]Helicenes

A straightforward approach to the synthesis of two different series of cationic [5]helicenes has been achieved including, in dioxa series, the possibility to introduce aromatic functional groups at the periphery of the helical structure. While photophysical study highlights that the introduction of aryl substituents at position 23 of the helical moieties has a negligible impact on the optical properties, styryl substituents allow a welcoming extension of the conjugation pathways. Finally, a red shift of the optical properties was evidenced upon introduction of nitrogen atoms in the helicene scaffold, leading to particularly good fluorescence efficiencies in the red domain for a helicenic dye. Detailed information on racemization kinetics was collected for the most stable species upon direct high-performance liquid chromatography (HPLC) resolution or, when configurational lability was too high, through VT-HPLC analysis on the chiral stationary phase (ΔG^‡ values ranging from 85.0 to 137.1 kJ·mol^-1 and above).

Long fluorescence lifetime triangulenium dyes in imaging and fluorescence polarization assay

The development of new fluorescent dyes-new fluorochromes-has a large potential to improve the established methods in enzymology, by empowering both detection capability and the scope of the individual method. Unfortunately, there are huge barriers when adopting new improved fluorescent dyes in established methods. The dyes have to be generally available, protocols for labeling and analysis must be in place, and the field has to be aware how the new improved dye can enhance their method of choice. In this chapter, we will address these issues for the triangulenium dyes. A class of dyes that has a long fluorescence lifetime and emission in the red. A unique combination that opens up new possibilities for the study of protein rotational motion, when developing fluorescence polarization (FP) assays, and for all time-resolved imaging or analysis platforms. To make these dyes generally available, the features of the long fluorescence lifetime triangulenium dyes are described and an optimized labelling protocol are reported.

How an Eight-Membered Ring Alters the Rhodamine Chromophore

Readily available phenylene-1,3-diamines can be converted into unprecedented analogues of rhodamine and malachite green possessing a central eight-membered ring in three steps. The overall process couples a cyanine chromophore with a urea bridge giving rise to new dyes possessing distinct spectral characteristics: absorption of orange light combined with a weak emission of red light both in solution and in the crystalline state. Their photophysics is governed by the twist of lateral phenyl rings and intramolecular and intermolecular CT transitions.

Synthesis and properties of sulfur-functionalized triarylmethylium, acridinium and triangulenium dyes

Triangulenium dyes functionalized with one, two or three ethylthiol functionalities were synthesized and their optical properties were studied. The sulfur functionalities were introduced by aromatic nucleophilic substitution of methoxy groups in triarylmethylium cations with ethanethiol followed by partial or full ring closure of the ortho positions with nitrogen or oxygen bridges leading to sulfur-functionalized acridinium, xanthenium or triangulenium dyes. For all the dye classes the sulfur functionalities are found to lead to intensely absorbing dyes in the visible range (470 to 515 nm), quite similar to known analogous dye systems with dialkylamino donor groups in place of the ethylthiol substituents. For the triangulenium derivatives significant fluorescence was observed (Φ_f = 0.1 to Φ_f = 0.3).