Pt-Catalyzed Hydrosilylation of 1,3-Diynes with Triorganosilanes: Regio- and Stereoselective Synthesis of Mono- or Bis-silylated Adducts

Regiodivergent Hydrosilylation of Polar Enynes to Synthesize Site-Specific Silyl-Substituted Dienes

Herein, we present catalyst-regulated switchable site-selective hydrosilylation of enynes, which are suitable for a wide range of alkyl and aryl substituted polar enynes and exhibit excellent functional group compatibility. Under the optimized conditions, silyl groups can be precisely installed at various positions of 1,3-dienes. While α- and γ-silylation products were obtained under platinum-catalytic systems, β-silylation products were delivered with [Cp*RuCl]4 as catalyst. This process lead to the formation of 1,3-dienoates with diverse substitutions, which would pose challenges with other methodologies.

Pt(PPh3)4 and Pt(PPh3)4@IL catalyzed hydroboration of ketones

An efficient method for the reduction of various ketones via [Pt(PPh3)4]-catalyzed hydroboration with HBpin has been successfully developed for the first time. The protocol is suitable for symmetrical and unsymmetrical derivatives possessing electron donating or withdrawing functional groups. O-borylated products were easily converted to 2° alcohols via hydrolysis with high isolated yields. According to the low-temperature NMR spectroscopy, a reaction mechanism was proposed. Additionally, effective immobilization of the catalyst in the ionic liquid [BMIM][NTf2] was applied to increase the productivity of the process by carrying out reactions under the repetitive batch mode, obtaining higher TON values and limiting the amount of expensive Pt used. The catalyst stability and almost neglectable leaching were confirmed by ICP-MS analysis of the extracted mixture. A simple separation method via extraction with n-heptane, efficient catalyst immobilization, and the commercial availability of the Pt complex, make this protocol an attractive method for the hydroboration of ketones.

Functionalization of octaspherosilicate (HSiMe2O)8Si8O12 with buta-1,3-diynes by hydrosilylation

Hydrosilylation with octaspherosilicate (HSiMe2O)8Si8O12 (1) has provided hundreds of molecular and macromolecular systems so far, making this method the most popular in the synthesis of siloxane-based, nanometric, cubic, and reactive building blocks. However, there are no reports on its selective reaction with 1,3-diynes, which allows for the formation of new products with unique properties. Therefore, herein we present an efficient protocol for monohydrosilylation of symmetrically and non-symmetrically 1,4-disubstituted buta-1,3-diynes with 1. The compounds obtained bear double and triple bonds and other functionalities (e.g., Br, F, OH, SiR3), making them highly desirable, giant building blocks in organic synthesis and material chemistry. These compounds were fully characterized by 1H, 13C, 29Si, 1D NOE, 1H-13C HSQC NMR, FT-IR, and MALDI TOF MS, EA, UV-Vis, and TGA analysis. The TGA proved their high thermal stability up to 427 ℃ (Td10%) for compound 3j.

Synthesis of unsymmetrically and symmetrically functionalized disiloxanes via subsequent hydrosilylation of C≡C bonds

A selective synthesis of unsymmetrically functionalized disiloxanes via the subsequent hydrosilylation of internal alkynes in the first step, and alkynes (terminal or internal) or 1,3-diynes in the second, with 1,1,3,3-tetramethyldisiloxane (1) is presented for the first time. Using developed approaches performed in a stepwise or one-pot manner a new family of disubstituted disiloxanes was obtained which had previously been inaccessible by other synthetic methods. Moreover, symmetrically functionalized disiloxanes were obtained by direct hydrosilylation of 2 equivalents of terminal or internal alkynes with 1, showing the unique versatility of the hydrosilylation process. Three examples of symmetric disiloxanes were characterized by single crystal X-ray diffraction for the first time. As a result, a wide group of new compounds which can find potential applications as building blocks or coupling agents was obtained and characterized.

An unusual autocatalysis with an air-stable Pd complex to promote enantioselective synthesis of Si-stereogenic enynes

Given the powerful potential of chiral-at-silicon chemistry, enantioselective synthesis of Si-stereogenic centers has attracted substantial research interest in recent years. However, the catalytic asymmetric synthesis of Si-stereogenic organosilicon compounds remains an appealing venture and is a challenging subject because of the difficulty in achieving high reactivity and stereoselectivity for "silicon-center" transformations. Herein, we disclose a highly enantioselective palladium-catalyzed hydrosilylation of 1,3-diynes with dihydrosilanes, which enables the facile preparation of Si-stereogenic enynes and an enyne-linked chiral polymer (polyenyne) in good yields and excellent ees (up to >99%) by desymmetrization. The unusual stereoselectivity in this reaction is achieved by precisely controlling the steric hindrance and electronic effect of the newly developed chiral ligands, resulting in a wide range of chiral silanes and a Si-containing polymer bearing a Si-stereogenic center which is otherwise difficult to access. The key to the high enantioselectivity relies on catalyst aggregation-induced non-covalent interaction, which exerts a remarkably positive influence on the Si-H bond activation and enhancement of enantioselectivity, in which the palladium/P-ligand complex was proved to be air-stable and moisture-insensitive in this reaction.

[Pt(PPh3)4]-Catalyzed Selective Diboration of Symmetrical and Unsymmetrical 1,3-Diynes

A straightforward, efficient, and selective method for the preparation of novel boryl-functionalized enynes or dienes via [Pt(PPh₃)₄]-catalyzed diboration of a broad spectrum of symmetrical and unsymmetrical 1,3-diynes was developed. The catalytic cycle of diboration was proposed on the basis of low-temperature ³¹P NMR studies. An alternative isolation method via product condensation on a cold finger was developed, which, in contrast to previous literature reports, eliminates the need for the additional transformation of rapidly decomposing enynyl pinacol boronates to more stable silica-based column chromatography derivatives during the separation step. To prove the efficiency of this simple catalytic protocol, bisboryl-functionalized enynes were synthesized in a gram scale and tested as useful building blocks in advanced organic transformations, such as hydrosilylation and Suzuki and sila-Sonogashira couplings. The presence of silyl, boryl, as well as other functions like halogen or alkoxy in their structures builds a new class of multifunctionalized enynes that might be modified in various chemical reactions.

Catalytic Hydrofunctionalization Reactions of 1,3-Diynes

Metal-catalyzed hydrofunctionalization reactions of alkynes, i.e., the addition of Y–H units (Y = heteroatom or carbon) across the carbon–carbon triple bond, have attracted enormous attention for decades since they allow the straightforward and atom-economic access to a wide variety of functionalized olefins and, in its intramolecular version, to relevant heterocyclic and carbocyclic compounds. Despite conjugated 1,3-diynes being considered key building blocks in synthetic organic chemistry, this particular class of alkynes has been much less employed in hydrofunctionalization reactions when compared to terminal or internal monoynes. The presence of two C≡C bonds in conjugated 1,3-diynes adds to the classical regio- and stereocontrol issues associated with the alkyne hydrofunctionalization processes’ other problems, such as the possibility to undergo 1,2-, 3,4-, or 1,4-monoadditions as well as double addition reactions, thus increasing the number of potential products that can be formed. In this review article, metal-catalyzed hydrofunctionalization reactions of these challenging substrates are comprehensively discussed.

Hydroelementation of diynes

This review highlights the hydroelementation reactions of conjugated and separated diynes, which depending on the process conditions, catalytic system, as well as the type of reagents, leads to the formation of various products: enynes, dienes, allenes, polymers, or cyclic compounds. The presence of two triple bonds in the diyne structure makes these compounds important reagents but selective product formation is often difficult owing to problems associated with maintaining appropriate reaction regio- and stereoselectivity. Herein we review this topic to gain knowledge on the reactivity of diynes and to systematise the range of information relating to their use in hydroelementation reactions. The review is divided according to the addition of the E-H (E = Mg, B, Al, Si, Ge, Sn, N, P, O, S, Se, Te) bond to the triple bond(s) in the diyne, as well as to the type of the reagent used, and the product formed. Not only are the hydroelementation reactions comprehensively discussed, but the synthetic potential of the obtained products is also presented. The majority of published research is included within this review, illustrating the potential as well as limitations of these processes, with the intent to showcase the power of these transformations and the obtained products in synthesis and materials chemistry.

Directed cis-hydrosilylation of borylalkynes to borylsilylalkenes

Directed by the choice of catalyst cis-hydrosilylation of borylalkynes leads to novel borylsilylalkenes which are crucial synthons for the introduction of the carbon–carbon double bonds in organic synthesis.

Engineering regioselectivity in the hydrosilylation of alkynes using heterobimetallic dual-functional hybrid catalysts

The synthesis and characterization of carbon black supported rhodium and iridium heterobimetallic hybrid catalysts and their application in the hydrosilylation of alkynes is described.

Nickel-catalyzed cascade hydrosilylation/cyclization of 1,7-enynes leading to silyl-containing quinolinones

In this paper, we disclose a nickel-catalyzed cascade hydrosilylation/cyclization reaction of 1,7-enynes with bulky silanes. The reaction features excellent chemoselectivity, broad functional group tolerance, and mild reaction conditions.

Rare-Earth-Catalyzed Selective 1,4-Hydrosilylation of Branched 1,3-Enynes Giving Tetrasubstituted Silylallenes

Allenes are versatile synthons in organic synthesis and medicinal chemistry because of their diverse reactivities. Catalytic 1,4-hydrosilylation of 1,3-enynes may present the straightforward strategy for synthesis of silylallenes. However, the transition-metal-catalyzed reaction has not been successful due to poor selectivity and very limited substrate scopes. We report here the efficient and selective 1,4-hydrosilylation of branched 1,3-enynes enabled by the ene-diamido rare-earth ate catalysts using both alkyl and aryl hydrosilanes, leading to the exclusive formation of tetrasubstituted silylallenes. Deuteration reaction, kinetic study, and DFT calculations were conducted to investigate the possible mechanism, revealing crucial roles of high Lewis acidity, large ionic radius, and ate structure of the rare-earth catalysts.

Alkenyl-Functionalized Open-Cage Silsesquioxanes (RSiMe2O)3R'7Si7O9: A Novel Class of Building Nanoblocks

Trifunctional incompletely condensed polyhedral oligomeric silsesquioxanes (RSiMe₂O)₃R′₇Si₇O₉ (IC-POSSs) are considered as intriguing building nanoblocks dedicated to constructing highly advanced organic–inorganic molecules and polymers. Up to now, they have been mainly obtained via hydrosilylation of olefins, while the hydrosilylation of the C≡C bonds has not been studied at all, despite the enormous potential of this approach resulting from the possibility of introducing 3, 6, or even more functional groups into the IC-POSS structure. Therefore, in this work, we present a highly selective and efficient synthesis of the first example of tripodal alkenyl-functionalized IC-POSSs, obtained via platinum-catalyzed hydrosilylation of the terminal and internal alkynes, as well as symmetrically and nonsymmetrically 1,4-disubstituted buta-1,3-diynes with silsesquioxanes (HSiMe₂O)₃R′₇Si₇O₉ (R′ = i-C₄H₉ (1a), (H₃C)₃CH₂C(H₃C)HCH₂C (1b)). The resulting products are synthetic intermediates that contain C=C bonds and functional groups (e.g., OSiMe₃, SiR₃, Br, F, B(O(C(CH₃)₂)₂ (Bpin)), thienyl), which make them suitable for application in the synthesis of novel, complex, hybrid materials with unique properties.

The first example of the synthesis of alkenyl-functionalized open-cage silsesquioxanes (IC-POSS) via platinum-catalyzed hydrosilylation of C−C triple bonds in alkynes and buta-1,3-diynes is presented. The optimized synthetic procedure allowed for the selective and efficient synthesis of 20 new functional molecules capable of further modification by hydrosilylation, hydroboration, or other chemical processes.

One Nanometer Wide Functional Patterns with a Sub-10 Nanometer Pitch Transferred to an Amorphous Elastomeric Material

Decades of work in surface science have established the ability to functionalize clean inorganic surfaces with sub-nm precision, but for many applications, it would be useful to provide similar control over the surface chemistry of amorphous materials such as elastomers. Here, we show that striped monolayers of diyne amphiphiles, assembled on graphite and photopolymerized, can be covalently transferred to polydimethylsiloxane (PDMS), an elastomer common in applications including microfluidics, soft robotics, wearable electronics, and cell culture. This process creates precision polymer films <1 nm thick, with 1 nm wide functional patterns, which control interfacial wetting and reactivity, and template adsorption of flexible, ultranarrow Au nanowires. The polydiacetylenes exhibit polarized fluorescence emission, revealing polymer location, orientation, and environment, and resist engulfment, a common problem in PDMS functionalization. These findings illustrate a route for patterning surface chemistry below the length scale of heterogeneity in an amorphous material.

Highly regio- and stereo-selective heterogeneous 1,3-diyne hydrosilylation controlled by a nickel-metalated porous organic polymer

A porous organic polymer (POL-xantphos) was synthesized and employed as a heterogeneous ligand for nickel catalyzed highly regio- and stereo-selective 1,3-diyne hydrosilylation.

Regio- and stereoselective cobalt-catalyzed hydrosilylation of 1,3-diynes with primary and secondary silanes

Reported herein is a well-defined geometry-constrained tridentate NNN-cobalt complex for regio- and stereoselective hydrosilylation of 1,3-diynes.

Polysiloxanes Grafted with Mono(alkenyl)Silsesquioxanes-Particular Concept for Their Connection

Herein, a facile and efficient synthetic route to unique hybrid materials containing polysiloxanes and mono(alkyl)silsesquioxanes as their pendant modifiers (T₈@PS) was demonstrated. The idea of this work was to apply the hydrosilylation reaction as a tool for the efficient and selective attachment of mono(alkenyl)substituted silsesquioxanes (differing in the alkenyl chain length, from -vinyl to -dec-9-enyl and types of inert groups iBu, Ph at the inorganic core) onto two polysiloxanes containing various amount of Si-H units. The synthetic protocol, determined and confirmed by FT-IR in situ and NMR analyses, was optimized to ensure complete Si-H consumption along with the avoidance of side-products. A series of 20 new compounds with high yields and complete β-addition selectivity was obtained and characterized by spectroscopic methods.

Cyclic metal(oid) clusters control platinum-catalysed hydrosilylation reactions: from soluble to zeolite and MOF catalysts

The Pt-catalysed addition of silanes to functional groups such as alkenes, alkynes, carbonyls and alcohols, i.e. the hydrosilylation reaction, is a fundamental transformation in industrial and academic chemistry, often claimed as the most important application of Pt catalysts in solution. However, the exact nature of the Pt active species and its mechanism of action is not well understood yet, particularly regarding regioselectivity. Here, experimental and computational studies together with an ad hoc graphical method show that the hydroaddition of alkynes proceeds through Pt-Si-H clusters of 3-5 atoms (metal(oid) association) in parts per million amounts (ppm), which decrease the energy of the transition state and direct the regioselectivity of the reaction. Based on these findings, new extremely-active (ppm) microporous solid catalysts for the hydrosilylation of alkynes, alkenes and alcohols have been developed, paving the way for more environmentally-benign industrial applications.