Why and When Is Electrophilicity Minimized? New Theorems and Guiding Rules

Investigation of magnetic ionic liquids for selective and rapid extraction of gallic acid from complex samples using experimental, statistical modeling and density functional theory studies

Given the high antioxidant capacity of gallic acid (GA), there is a great deal of interest in the development of rapid, selective, simple, and easily accessible analytical methods for its determination from complex samples. Consequently, the present study aimed to develop an ultrasonic assisted magnetic ionic liquid-based dispersive liquid microextraction (UA-MIL-DLLME) method for the extraction of GA from various samples prior to its spectrophotometric detection. The method's key variables were optimized through statistical analysis. Four magnetic liquids (MILs) were prepared and tested to extract the GA-Se complex formed in aqueous solution. Both experimental studies and theoretical calculations demonstrated that the most suitable MIL for the phase separation of the relevant complex is [P6,6,6,14][Mn(hfacac)3]. The developed UA-MIL-DLLME method exhibited a wide linear range (5-400 ng mL-1), a remarkable enhancement factor (133), and a low limit of detection (1.6 ng mL-1). Additionally, high extraction recovery (97 ± 1%) with a low relative standard deviation (1.9%) was achieved. The extraction time for the UA-MIL-DLLME method was 8 min. The precision of the method was evaluated through repeatability and reproducibility studies. Finally, the UA-MIL-DLLME method was successfully applied to the extraction of the GA from complex samples using a reference method.

New solvated Mo(VI) complexes of isatin based asymmetric bisthiocarbohydrazones as potent bioactive agent: synthesis, DFT-molecular docking studies, biological activity evaluation and crystal structures

New solvated Mo(VI) complexes were isolated from the reaction of [MoO2(acac)2] with asymmetric isatin bisthiocarbohydrazone ligands. The ligands were obtained from the reaction of isatin monothiocarbohydrazone with 3,5-dibromo salicylaldehyde (L1), 3,5-dichloro salicylaldehyde (L2) and 3-chloro-5-bromo salicylaldehyde (L3), respectively. In the complexes, the ligands serve as ONS donors and coordinate to the [MoO2]2+ nucleus. The bonding sites are azomethine nitrogen atom, phenolic oxygen atom and thiol sulfur atom. The sixth coordination site is completed by an oxygen atom from an ethanol solvent. The ethanol-coordinated Mo(VI) complexes, C1-C3, [MoO2L(EtOH)] (L: L1-L3), were characterized using elemental analysis, IR and 1H NMR spectroscopies, and conductivity measurements. By crystallizing ethanol-solvated solid complexes from an EtOH/DMSO mixture, DMSO-solvated complexes (C4-C6) suitable for X-ray crystallography were obtained. Crystal structure analysis supports the proposed complex structures and geometries, but the ethanol in the sixth coordination site has been replaced by DMSO. When the anticarcinogenic effects of the ligands and complexes (C1-C3) on the C6 cell line were examined, it was found that the complexes showed higher activity than the ligands. The C3 complex appears to have the best anti-cancer activity compared to doxorubicin. Additionally, all compounds were determined to have high total antioxidant capacity. Data obtained from theoretical studies (DFT and docking) support experimental studies.

New Azo Derivative of β-Diketones and Its Cu(II), Co(II) Complexes: Synthesis, Theoretical Study and Biological Activity

The paper is focused on biological activity and theoretical study of the structure and properties of a new azo derivative of β-diketones and its complexes with some metals. The aim of our work was to study the structure and properties of the newly synthesized compound as well as to theoretically determine the possibility of complex formation with the Cu(II) or Co(II) ions. A compound with the same substituents R1=R2=CH3 was chosen for the study. A synthesized azo compound based on 4-amino antipyrine and its complexes with Cu(II), Co(II) in solution and solid phase is reported. The structures of these compounds have been testified by X-ray, IR and  NMR spectroscopy. The combined experimental and theoretical approach was used. To study the structure and properties of the synthesized compound, as well as its possible complex formation with the Cu(II), quantum-chemical calculations were carried out the 6-31G basis set and the electron density functional theory (DFT) method. These 3-(1-phenyl-2,3-dimethyl-pyrazolone-5) azopentadione-2,4 (PDPA) with Cu(II) and Co(II) complexes had effective inhibition against butyrylcholinesterase and acetylcholinesterase. IC50 values were found as 19.03, 3.64 μM for AChE and 28.47, 8.01 μM for BChE, respectively. Cholinesterase inhibitors work to slow down the acetylcholine's deterioration.

Discovery of novel anticancer flavonoids as potential HDAC2 inhibitors: virtual screening approach based on molecular docking, DFT and molecular dynamics simulations studies

Virtual screening of a library of 329 flavonoids obtained from the NPACT database was performed to find out potential novel HDAC2 inhibitors. Eleven out of 329 selected flavonoids were screened based on molecular docking studies, as they have higher binding affinities than the standard drugs vorinostat and panobinostat. All screened compounds occupying the catalytic site of HDAC2 showed important molecular interaction with Zn2+ and other important amino acids in the binding pocket. The screened compounds were validated using ADMET filtration and bioactivity prediction from which we obtained six compounds, NPACT00270, NPACT00676, NPACT00700, NPACT001008, NPACT001054, and NPACT001407, which were analyzed using DFT studies. DFT studies were performed for all six screened flavonoids. In DFT studies, three flavonoids, NPACT00700, NPACT001008, and NPACT001407, were found to be better based on HOMO-LUMO and molecular electrostatic potential (MEP) analyses. Furthermore, MD simulations were performed for 100 ns for the three compounds. In the MD analysis, NPACT001407 was found to be more stable in the active site of HDAC2 as zinc formed a coordination bond with ASP181, HIS183, ASP269, and GLY305, along with two hydroxyl groups of the ligand. Our findings reveal that these flavonoids can interact as ligands with the active site of HDAC2. Because of the absence of a hydroxamate group in flavonoids, there are no possibilities for the formation of isocyanate. This suggests that the major drawback of current HDACs inhibitors may be solved. Further experimental validation is needed to understand the selectivity of flavonoids as HDAC2 inhibitors.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13205-023-03912-5.

Theoretical analysis of OLED performances of some aromatic nitrogen-containing ligands

It is well-known that tris(8-hydroxyquinoline) aluminum (Alq3) complex and N,N'diphenyl-N,N'-bis(3-methylphenyl)-1,1'-diphenyl-4,4'-diamine compound (TPD) are widely used as electron transfer material (ETL) and hole transfer material (HTL) in organic light emitting diode (OLED) structure, respectively. Considering the reference materials, in the present work, the OLED performances of some cyclic aromatic structures such as 4,4'azopyridine [AZPY], 4,4'-bipyridine [BIPY], 1,2-bis[4'-(4-methylphenyl)2,2':6'2″-terpyridin6-yl]ethyne (BISTERPY), 5,5'-diamino-2,2'-bipyridine (DABP), dipyrido[3,2-a:2',3'c]phenazine (DPP), 4,7-phenanthroline (PHEN) including nitrogen atom have been theoretically analyzed. It is important to note that B3LYP/6-31G(d) and B3LYP/TZP levels of the theory were taken into account for the calculations about monomeric and dimeric structures, respectively. Additionally, the calculations of the mentioned monomeric form were performed at B3LYP-D3/6-31G, CAM-B3LYP/6-31G and ωB97X-D/6-31G(d) levels. For a detailed theoretical analysis, the reorganization energies (λe and λh), adiabatic and vertical ionization potentials and electron affinities, the effective transfer integrals (Ve and Vh), and the charge transfer rates (We and Wh) of all compounds were computed by means of computational chemistry tools. In the light of calculated parameters, it is determined that these mentioned aromatic cyclic structures will be used in which layers of OLED structure. The results obtained in this study will be helpful in the design and applications of new molecules as OLED materials in the future.

Electrophilicity index revisited

This review aims to be a comprehensive, authoritative, critical, and accessible review of general interest to the chemistry community; because the electrophilicity index is a very useful global reactivity descriptor defined within a conceptual density functional theory framework. Our group has also introduced electrophilicity based new global and local reactivity descriptors and also new associated electronic structure principles, which are important indicators of structure, stability, bonding, reactivity, interactions, and dynamics in a wide variety of physico-chemical systems and processes. This index along with its local counterpart augmented by the associated electronic structure principles could properly explain molecular vibrations, internal rotations and various types of chemical reactions. The concept of the electrophilicity index has been extended to dynamical processes, excited states, confined environment, spin-dependent and temperature-dependent situations, biological activity, site selectivity, aromaticity, charge removal and acceptance, presence of external perturbation through solvents, external electric and magnetic fields, and so forth. Although electrophilicity and its local variant can adequately interpret the behavior of a wide variety of systems and different physico-chemical processes involving them, their predictive potential remains to be explored. An exhaustive review on all these aspects will set the tone of the future research in that direction.

Atoms-In-Molecules' Faces of Chemical Hardness by Conceptual Density Functional Theory

The chemical hardness concept and its realization within the conceptual density functional theory is approached with innovative perspectives, such as the electronegativity and hardness equalization of atoms in molecules connected with the softness kernel, in order to examine the structure-reactivity equalization ansatz between the electronic sharing index and the charge transfer either in the additive or geometrical mean picture of bonding. On the other hand, the maximum hardness principle presents a relation with the chemical stability of the hardness concept. In light of the inverse relation between hardness and polarizability, the minimum polarizability principle has been proposed. Additionally, this review includes important applications of the chemical hardness concept to solid-state chemistry. The mentioned applications support the validity of the electronic structure principles regarding chemical hardness and polarizability in solid-state chemistry.

High-Performance Material for the Effective Removal of Uranyl Ion from Solution: Computationally Supported Experimental Studies

Adsorption is a widely used method for pollution removal and for the recovery of valuable species. In recent years, the use of metal-organic compounds among the adsorbents used in adsorption studies has increased. In this study, the performance of the water-insoluble Fe complex as a metal organic framework (MOF-Fe-Ta) of water-soluble tannic acid, which is not used as an adsorbent in uranium recovery and removal, was investigated. For the characterization of the new synthesized material, Fourier transform infrared, scanning electron microscopy, and X-ray diffraction analyses were performed. The changes in the adsorption process based on various parameters were investigated and discussed. The point of zero charges value of the adsorbent was found as 5.52. It was noticed that the adsorption increases as the pH increases. Analyzing the effect of concentration on adsorption, we determined which model explained the adsorption better. The monolayer capacity of the adsorbent determined in light of the Langmuir model was reported as 0.347 mol kg^-1. The Freundlich constant, namely the β value obtained in the Freundlich model, which is a measure of surface heterogeneity, was found to be 0.434, and the E_DR value, which was found from the Dubinin-Raduskevich model and accepted as a measure of adsorption energy, was 10.3 kJ mol^-1. The adsorption was kinetically explained by the pseudo-second-order model and the adsorption rate constant was reported as 0.15 mol^-1 kg min^-1. The effect of temperature on adsorption was studied; it was emphasized that adsorption was energy consuming, that is, endothermic and ΔH was found as 7.56 kJ mol^-1. The entropy of adsorption was positive as 69.3 J mol^-1 K^-1. As expected, the Gibbs energy of adsorption was negative (-13.1 kJ mol^-1 at 25 °C), so adsorption was considered as a spontaneous process. Additionally, the power and mechanism of the interaction between studied adsorbent and adsorbate are explained through density functional theory computations. Computationally obtained data supported the experimental studies.

Chemical Reactivity and Optical and Pharmacokinetics Studies of 14 Multikinase Inhibitors and Their Docking Interactions Toward ACK1 for Precision Oncology

Activated Cdc42-associated kinase 1 (ACK1/TNK2) has a significant role in cell endocytosis, survival, proliferation, and migration. Mutations in ACK1 are closely associated with the occurrence and development of cancers. In this work, a conceptual density functional theory (CDFT)-based computational peptidology (CDFT-CP) method is used to study the chemical reactivity of 14 multikinase inhibitors. Optical properties of these inhibitors are studied by time-dependent density functional theory (TDDFT). Various biological and pharmacokinetic parameters are studied by Osiris, Molinspiration, and BOILED-Egg in SwissADME software tools. Physicochemical and biopharmaceutical (PCB), Salmonella typhimurium reverse mutation assay (AMES) mutagenicity, toxicity, and risk prediction are estimated by Simulations plus ADMET Predictor 10.2 software. MD simulations for an active model of ACK1 is carried out by the CABS-flex 2.0 web server, and potential binding pockets for ACK1 are searched using the PrankWeb server. SwissTargetPrediction is used to predict the potential targets for the multikinase inhibitors. Docking studies are carried out for ACK1–multikinase inhibitors using Autodock 4.2 software. Noncovalent interactions for ACK1–multikinase inhibitor complexes are studied using the Protein–Ligand Interaction Profiler (PLIP) server. Results indicated higher binding affinities and strong noncovalent interactions in ACK1–multikinase inhibitor complexes.

A comprehensive and current review on the role of flavonoids in lung cancer-Experimental and theoretical approaches

BACKGROUND

It is well-known that flavonoids, which can be easily obtained from many fruits and vegetables are widely preferred in the treatment of some important diseases. Some researchers noted that these chemical compounds exhibit high inhibition effect against various cancer types. Many experimental studies proving this ability of the flavonoids with high antioxidant activity are available in the literature.

PUROPOSE

The main aim of this review is to summarize comprehensively anticancer properties of flavonoids against the lung cancer in the light of experimental studies and well-known theory and electronic structure principles. In this review article, more detailed and current information about the using of flavonoids in the treatment of lung cancer is presented considering theoretical and experimental approaches.

STUDY DESIGN

In addition to experimental studies including the anticancer effects of flavonoids, we emphasized the requirement of the well-known electronic structure principle in the development of anticancer drugs. For this aim, Conceptual Density Functional Theory should be considered as a powerful tool. Searching the databases including ScienceDirect, PubMed and Web of Science, the suitable reference papers for this project were selected.

METHODS

Theoretical tools like DFT and Molecular Docking provides important clues about anticancer behavior and drug properties of molecular systems. Conceptual Density Functional Theory and CDFT based electronic structure principles and rules like Hard and Soft Acid-Base Principle (HSAB), Maximum Hardness Principle, Minimum Polarizability, Minimum Electrophilicity Principles and Maximum Composite Hardness Rule introduced by one of the authors of this review are so useful to predict the mechanisms and powers of chemical systems. Especially, it cannot be ignored the success of HSAB Principle in the explanations and highlighting of biochemical interactions.

RESULTS

Both theoretical analysis and experimental studies confirmed that flavonoids have higher inhibition effect against lung cancer. In addition to many superior properties like anticancer activity, antimicrobial activity, antioxidant activity, antidiabetic effect of flavonoids, their toxicities are also explained with the help of published popular papers. Action modes of the mentioned compounds are given in detail.

CONCLUSION

The review includes detailed information about the mentioned electronic structure principles and rules and their applications in the cancer research. In addition, the epidemiology and types of lung cancer anticancer activity of flavonoids in lung cancer are explained in details.

Synthesis, photophysical, electrochemical, and DFT examinations of two new organic dye molecules based on phenothiazine and dibenzofuran

New dyes were developed and produced utilizing distinct electron donors (phenothiazine and dibenzofuran), a π-spacer, and an electron acceptor of cyanoacetohydrazide, and their structures were studied using FT-IR and NMR spectroscopy. Following the synthesis of dye molecules, the photophysical and photovoltaic characteristics were investigated using experimental and theoretical methods. The photosensitizers have been exposed to electrochemical and optical property experiments in order to study their absorption performance and also molecular orbital energies. The monochromatic optical conversion efficiency of (Z)-N-((5-(10H-phenothiazin-2-yl)furan-2-yl)methylene)-2-cyanoacetohydrazide (PFCH) was found higher than that of (Z)-2-cyano-N'-((5-(dibenzo[b,d]furan-4-yl)furan-2-yl)methylene)acetohydrazide (BFCH), with IPCEs of 58 and 64% for BFCH and PFCH, respectively. According to the photosensitizer molecular energy level diagram, the studied dye molecules have strong thermodynamically advantageous ground and excited-state oxidation potentials for electron injection into the conduction band of titanium oxide. It was observed that the ability to attract electrons correlated favorably with molecular orbital energy. While density functional theory calculations were used to examine molecule geometries, vertical electronic excitations, and frontier molecular orbitals, experimental and computed results were consistent. Natural bond orbital and nonlinear optical properties were also calculated and discussed.

Kick-Fukui: A Fukui Function-Guided Method for Molecular Structure Prediction

Here, we introduce a hybrid method, named Kick-Fukui, to explore the potential energy surface (PES) of clusters and molecules using the Coulombic integral between the Fukui functions in the first screening of the best individuals. In the process, small stable molecules or clusters whose combination has the stoichiometry of the explored species are used as assembly units. First, a small set of candidates has been selected from a large and stochastically generated (Kick) population according to the maximum value of the Coulombic integral between the Fukui functions of both fragments. Subsequently, these few candidates are optimized using a gradient method and density functional theory (DFT) calculations. The performance of the program has been evaluated to explore the PES of various systems, including atomic and molecular clusters. In most cases studied, the global minimum (GM) has been identified with a low computational cost. The strategy does not allow to identify the GM of some silicon clusters; however, it predicts local minima very close in energy to the GM that could be used as the initial population of evolutionary algorithms.

Zeolite/Cellulose Acetate (ZCA) in Blend Fiber for Adsorption of Erythromycin Residue From Pharmaceutical Wastewater: Experimental and Theoretical Study

The expanding amount of remaining drug substances in wastewater adversely affects both the climate and human well-being. In the current investigation, we developed new cellulose acetic acid derivation/zeolite fiber as an effective technique to eliminate erythromycin (ERY) from wastewater. The number of interchangeable sites in the adsorbent structures and the ratio of ERY to the three adsorbents were identified as the main reasons for the reduction in adsorption as the initial ERY concentrations increased. Additionally, for all adsorbents, the pseudo–second-order modeling showed better fitting for the adsorption than the pseudo–first-order modeling. However, the findings obtained in the pseudo–first-order model were still enough for explaining the sorption kinetics of ERY, showing that the surface displayed all chemisorption and physi-sorption adsorption processes by both adsorbents. The R² for the second order was very close to 1 for the three adsorbents in the case of pseudo–second-order. The adsorption capacity reached 17.76 mg/g. The three adsorbents showed negative values of ΔH, and these values were −6,200, −8,500, and −9600 kJ/mol for zeolite, CA, and ZCA, respectively, and this shows that the adsorption is exothermic. The desorption analysis shows no substantial loss of adsorption site after three trials, indicating higher stability and resilience of the three adsorbents, indicating a strong repeatability of their possible use in adsorption without contaminating the environment. In addition, the chemical attitude and possible donor–acceptor interactions of ERY were assessed by the quantum chemical parameters (QCPs) and NBO analysis performed, at the HF/6-311G** calculations.

Simulation and surface topology of activity of pyrazoloquinoline derivatives as corrosion inhibitor on the copper surfaces

In the present study, corrosion inhibition performances of some pyrazolo [3,4-b] quinoline-3,5-dione derivatives against the corrosion of copper metal were investigated using B3LYP/6-311++g(d,p) calculation level in aqueous media. Additionally, interaction energies were calculated for all the pyrazoloquinoline derivatives compounds. In the calculations it is observed that studied molecules adsorb on metal surface with the help of electron donor heteroatoms in their molecular structures. Chemical thermodynamic parameters regarding the interaction between inhibitor molecule and copper surface were estimated and discussed. Density of the electron profile analysis and chemical electrostatic potential of nuclear charges in the molecule were applied to consider the nature of a number of probable interactions between Cu metal surface and inhibitors in terms of bond critical point (BCP). Calculated quantum chemical parameters showed that the pyrazoloquinoline derivatives including the OH and NO₂ exhibit high inhibition performance.