The Role of pH in Modulating the Electronic State Properties of Minocycline Drug and Its Inclusion within Micellar Carriers

Highly efficient and sensitive detection of tetracycline in environmental water: Insights into the synergistic mechanism of biomass-derived carbon dots and N-methyl pyrrolidone solvent

The tetracycline (TC) residue in water environment has caused serious public safety issue. Thus, efficient sensing of TC is highly desirable for environmental protection. Herein, biomass-derived nitrogen-doped carbon dots (N-CDs) synthesized from natural Ophiopogon japonicus f. nanus (O. japonicus) were used for TC detection. The unique solvent synergism efficiently enhanced detection sensitivity, and the detailed sensing mechanism was deeply investigated. The blue fluorescence of N-CDs was quenched by TC via static quenching and inner filter effect. Moreover, the enhancement of green fluorescence from deprotonated TC was firstly proposed and sufficiently verified. The solvent effect of N-methyl pyrrolidone (NMP) and the fluorescence resonance energy transfer (FRET) with N-CDs achieved an instantaneous enhancement of the green emission by 64-fold. Accordingly, a ratiometric fluorescence method was constructed for rapid and sensitive sensing of TC with a low detection limit of 6.3 nM within 60 s. The synergistic effect of N-CDs and solvent assistance significantly improved the sensitivity by 7-fold compared to that in water. Remarkably, the biomass-derived N-CDs displayed low cost, good solubility, and desired stability. The deep insights into the synergism with solvent can provide prospects for the utilization of biomass-based materials and broaden the development of advanced sensors with promising applications.

Modification of ordered mesoporous carbon for removal of environmental contaminants from aqueous phase: A review

Contamination of water bodies by potentially toxic elements and organic pollutants has aroused extensive concerns worldwide. Thus it is significant to develop effective adsorbents for removing these contaminants. As a new member of carbonaceous material families (activated carbon, biochar, and graphene), ordered mesoporous carbon (OMC) with larger specific surface area, ordered pore structure, and higher pore volume are being evaluated for their use in contaminant removal. In this paper, modification techniques of OMC were systematically reviewed for the first time. These include nonmetallic doping modification (nitrogen, sulfur, and boron) and the impregnation of nano-metals and metal oxides (iron, copper, cobalt, nickel, magnesium, and rare earth element). Reaction conditions (solution pH, reaction temperature, sorbent dosage, and contact time) are of critical importance for the removal performance of contaminants onto OMC. In addition, the pristine and modified OMC have been investigated for the removal of a range of contaminants, including cationic/anionic toxic elements and organic contaminants (synthetic dye, phenol, and others), and involving different and specific mechanisms of interaction with contaminants. The future research directions of the application of pristine and modified OMC were proposed. Overall, this review can provide sights into the modification techniques of OMC for removal of environmental contaminants.

The role of twisting in driving excited-state symmetry breaking and enhanced two-photon absorption in quadrupolar cationic pyridinium derivatives

Two symmetric quadrupolar cationic push-pull compounds with a central electron-acceptor (N+-methylpyrydinium, A+) and different lateral electron-donors, (N,N-dimethylamino and N,N-diphenylamino, D) in a D-π-A+-π-D arrangement, were investigated together with their dipolar counterparts (D-π-A+) for their excited-state dynamics and NLO properties. As for the quadrupolar compounds, attention was focused on excited-state symmetry breaking (ESSB), which leads to a relaxed dipolar excited state. Both electron charge displacements and structural rearrangements were recognized in the excited-state dynamics of these molecules by resorting to femtosecond-resolved broadband fluorescence up-conversion experiments and advanced data analysis, used as a valuable alternative approach for fluorescent molecules compared to time-resolved IR spectroscopy, only suitable for compounds bearing IR markers. Specifically, intramolecular charge transfer (ICT) was found to be guided by ultrafast inertial solvation, while diffusive solvation can drive the twisting of lateral groups to originate twisted-ICT (TICT) states on a picosecond time scale. Yet still, only the bis-N,N-diphenylamino-substituted compound undergoes ESSB, in both highly and sparingly polar solvents, provided that it can experience large amplitude motions to a fully symmetry-broken TICT state. Besides well-known solvation effects, this structural requirement proved to be a necessary condition for these quadrupolar cations to undergo ESSB. In fact, a more efficient uncoupling between the out-of-plane D and A+ groups in the TICT state allows a greater stabilization gained through solvation, relative to the bis-N,N-dimethylamino-substituted derivative, which instead maintains its symmetry. This different behavior parallels the two-photon absorption (TPA) ability, which is greatly enhanced in the case of the bis-N,N-diphenylamino-substituted compound, paving the way for cutting-edge bio-imaging applications.

Use of a Zwitterionic Surfactant to Improve the Biofunctional Properties of Wool Dyed with an Onion (Allium cepa L.) Skin Extract

To improve the loadability and antioxidant properties of wool impregnated with onion skin extract, the introduction of SB3-14 surfactant in the dyeing process was evaluated. A preliminary investigation on the surfactant-quercetin interaction indicated that the optimal conditions for dye solubility, stability, and surfactant affinity require double-distilled water (pH = 5.5) as a medium and SB3-14 in a concentration above the c.m.c. (2.5 × 10-3 M). The absorption profile of textiles showed the flavonoid absorption band (390 nm) and a bathochromic feature (510 nm), suggesting flavonoid aggregates. The higher absorbance for the sample dyed with SB3-14 indicated greater dye uptake, which was further confirmed by HPLC analysis. The Folin-Ciocalteu method was applied to evaluate the total phenol content (TPC) released from the treated wool, while the assays FRAP, DPPH, ABTS, and ORAC were applied to evaluate the corresponding total antioxidant activity (TAC). Higher TPCs (about 20%) and TACs (5-55%) were measured with SB3-14, highlighting textiles with improved biofunctional properties. Spectrophotometric analyses were also performed with an artificial sweat. The potential cytotoxic effect of SB3-14 in both monomeric and aggregated forms, cell viability, and induction of apoptosis were evaluated in RAW 264.7 cells. These analyses revealed that SB3-14 is safe at concentrations below the c.m.c.

Magnetic aluminum-based metal organic framework as a novel magnetic adsorbent for the effective removal of minocycline from aqueous solutions

In this paper, Fe₃O₄@MIL-68 (Al), a magnetic aluminum-based metal organic framework, was synthesized by a simple method and used as a novel and effective adsorbent for the removal of minocycline (MC) from aqueous solutions. The material was thoroughly characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and N₂ adsorption isotherms. The characterization results showed that the original structure of MIL-68(Al) was unchanged by the addition of Fe₃O₄ nanoparticles, and that the obtained material had a strong magnetic response which also promoted its adsorption. Batch adsorption experiments were conducted by the varying the adsorption time, temperature, initial MC concentration and pH. The maximum adsorption amount of MC onto Fe₃O₄@MIL-68 (Al) was 248.05 mg g^-1 (t = 160 min, pH = 6, C_o = 60 mg L^-1), and the adsorption kinetics followed a pseudo-second-order model, and the adsorption isotherms conformed to the Freundlich equation. The adsorption mechanism of the magnetic metal organic framework materials were determined to involve complex interactions, including Al-N and Fe-N covalent bonds, hydrogen bonding, electrostatic adsorption, and π-π stacking. Combined the results indicate that Fe₃O₄@MIL-68 (Al) is an outstanding adsorbent for the removal of MC from water.

Effect of hydrogen bonding interaction on the photophysics of α-amino-orcein

This paper reports for the first time a detailed spectroscopic investigation into the ground- and excited-state properties of α-amino-orcein (α-AO), one of the main components of the orcein dye, in solvents of different proticity and water at different pHs. In order to gain insight into the nature of the involved transitions and excited state deactivation pathways, the study was carried out by means of UV-Visible steady state and ultrafast spectroscopic techniques with the support of quantum mechanical calculations (DFT and TDDFT). The results highlight that the photophysical and photodynamic behaviour of α-AO are highly sensitive to the solvent proticity and pH. In particular, protic environment induces a red shift (55 nm) of the absorption spectrum together with a relevant decrease of the fluorescence quantum yield (from 0.19 in acetonitrile to 6.6 × 10^-3 in methanol) and radiative rate constant (two orders of magnitude). A notable red shift is also caused by increasing the pH leading the molecule from monocationic to neutral and then monoanionic form through two deprotonation steps (pKa = 3.539 ± 0.006 and 11.180 ± 0.006). Following deprotonation, the molecule assumes spectral and photophysical properties very similar to those retrieved in protic media. The observed behaviour has been rationalized through the occurrence of hydrogen bonding, likely involving to a greater extent the carbonyl oxygen of α-AO and the protic solvent, that favours the charge delocalization on the whole chromophore as well as fast non-radiative excited state deactivation. The ultrafast spectroscopic investigation revealed in fact the presence, in protic solvent, of a short living component (tens of picoseconds), assignable to solvent complexed S₁ state, alongside the long living component (few nanoseconds) observed in aprotic media and attributed to the solvent free S₁ state. The results achieved in this study for α-AO provides an important contribution to the interpretation of absorption and fluorescence features of orcein dye mixture in more complex systems (protein based substrates within the many aspects of the cultural heritage and biomedical field) where hydrogen bonds are expected to play a crucial role in mediating the interaction with the environment.

Magnetic ordered mesoporous carbon materials for adsorption of minocycline from aqueous solution: Preparation, characterization and adsorption mechanism

In this paper, the effect of cyanoguanidine (CNGE) for tailoring pore size during the soft-templating preparation of mesoporous carbon materials was studied. In consideration of cyclic utilization, the surface of the mesoporous carbon materials were doped with magnetic Fe₃O₄ particles. The characterization results (including TEM, XRD, BET, TGA and FT-IR) showed that adding CNGE did not destroy the ordered porous structure; instead, it changed the pore size from 2.98 nm to 9.42 nm. Besides, the mesoporous carbon materials exhibited a strong magnetic response owing to the dopant of Fe₃O₄ particles. With the increase in CNGE, some functional groups were added to the surface of the mesoporous carbon materials, which partly promoted the adsorption effect. The results indicated that adsorption approached equilibrium in the first 10 min and reached the maximum when the pore size was 5.89 nm. The kinetic of minocycline adsorption on magnetic ordered mesoporous carbon material could be interpreted by a pseudo-first-order model. The adsorption isotherms showed that the adsorption process was complex, combining physical and weak chemical adsorption, in good agreement with the Sips model.

Novel SS-31 modified liposomes for improved protective efficacy of minocycline against drug-induced hearing loss

SS-31 modified, minocycline-loaded liposomes significantly increased hair cell survival against chronic exposure to gentamicin in a zebrafish model.

Dynamics of excited-state intramolecular proton-transfer in 2-amino-3-(2'-benzazolyl)quinoline cations

It was found that cations formed by the protonation of 2-amino-3-(2'-benzoxazolyl)-quinoline (ABO) and 2-amino-3-(2'-benzothiazolyl)-quinoline (ABT) at the nitrogen atom of the quinoline ring exhibit excited-state intramolecular proton transfer (ESIPT). The two-band fluorescence of these cations is due to the emission from two species: the initial tautomer (short-wavelength band) and the ESIPT product (long-wavelength band). The relative intensity of the long-wavelength band depends on the basicity of the proton-accepting moiety and temperature. Quantum-chemical calculations demonstrated that ESIPT in cations involves overcoming a significant potential barrier, which increases with the decreasing basicity of the proton-accepting benzazole moiety. Using femtosecond absorption spectroscopy and nanosecond fluorescence spectroscopy, the effective ESIPT time in the studied cations was determined, which increased with decreasing temperature.