Toward Magic Photoacids: Proton Transfer in Concentrated Sulfuric Acid

A super-hydrophilic graphite directly from lignin enabled by a room-temperature cascade catalytic carbonization

A cost-effective, and low-energy room-temperature cascade catalytic carbonization strategy is demonstrated for converting lignin into graphite with a high yield of 87 %, a high surface potential of -37 eV and super-hydrophilicity. This super-hydrophilic feature endows the lignin-derived graphite to be dispersed in a variety of polar solvents, which is important for its future applications. Encapsulating of liquid metals with the graphite for electrical circuit patterning on flexible substrates is also advocated. These written patterns show superb conductivity of 4.9 × 106 S/m, offering good performance stability and reliability while being repeatedly stretched, folded, twisted, and bent. This will offer new designs for flexible electronic devices, sensors, and biomedical devices.

Ultrafast transient absorption and solvation of a super-photoacid in acetoneous environments

The phenomenon of photoacidity, i.e., an increase in acidity by several orders of magnitude upon electronic excitation, is frequently encountered in aromatic alcohols capable of transferring a proton to a suitable acceptor. A promising new class of neutral super-photoacids based on pyranine derivatives has been shown to exhibit pronounced solvatochromic effects. To disclose the underlying mechanisms contributing to excited-state proton transfer (ESPT) and the temporal characteristics of solvation and ESPT, we scrutinize the associated ultrafast dynamics of the strongest photoacid of this class, namely tris(1,1,1,3,3,3-hexafluoropropan-2-yl)8-hydroxypyrene-1,3,6-trisulfonate, in acetoneous environment, thereby finding experimental evidence for ESPT even under these adverse conditions for proton transfer. Juxtaposing results from time-correlated single-photon counting and femtosecond transient absorption measurements combined with a complete decomposition of all signal components, i.e., absorption of ground and excited states as well as stimulated emission, we disclose dynamics of solvation, rotational diffusion, and radiative relaxation processes in acetone and identify the relevant steps of ESPT along with the associated time scales.

Theoretical Study on the Photoacidity of Hydroxypyrene Derivatives in DMSO Using ADC(2) and CC2

This work applies the thermodynamic Förster cycle to theoretically investigate the pK_a^*, i.e., excited-state pK_a values of pyranine-derived superphotoacids developed by Jung and co-workers. The latter photoacids are strong enough to transfer a proton to the aprotic solvent dimethyl sulfoxide (DMSO). The Förster cycle provides access to pK_a^* via the ground-state pK_a and the electronic excitation energies. We use the conductor-like screening model for real solvents (COSMO-RS) to compute the ground-state pK_a and the correlated wavefunction-based methods ADC(2) and CC2 with the continuum solvation model COSMO to calculate the pK_a change upon excitation. A comparison of the calculated UV/Vis absorption and fluorescence emission energies to the experimental results leads us to infer that this approach allows for a proper description of the electronic excitations. In particular, implicit solvation by means of the COSMO model appears to be sufficient for the treatment of these photoacids in DMSO. The calculations confirm the presumption that a charge redistribution from the hydroxy group to the aromatic ring and the electron-withdrawing substituents is the origin of photoacidity for these photoacids. Moreover, the calculations with the continuum solvation model predict that the pK_a jump upon excitation decreases with increasing solvent polarity, as rationalized based on the Förster cycle.

Evaluating Alternatives to Water as Solvents for Life: The Example of Sulfuric Acid

The chemistry of life requires a solvent, which for life on Earth is water. Several alternative solvents have been suggested, but there is little quantitative analysis of their suitability as solvents for life. To support a novel (non-terrestrial) biochemistry, a solvent must be able to form a stable solution of a diverse set of small molecules and polymers, but must not dissolve all molecules. Here, we analyze the potential of concentrated sulfuric acid (CSA) as a solvent for biochemistry. As CSA is a highly effective solvent but a reactive substance, we focused our analysis on the stability of chemicals in sulfuric acid, using a model built from a database of kinetics of reaction of molecules with CSA. We consider the sulfuric acid clouds of Venus as a test case for this approach. The large majority of terrestrial biochemicals have half-lives of less than a second at any altitude in Venus's clouds, but three sets of human-synthesized chemicals are more stable, with average half-lives of days to weeks at the conditions around 60 km altitude on Venus. We show that sufficient chemical structural and functional diversity may be available among those stable chemicals for life that uses concentrated sulfuric acid as a solvent to be plausible. However, analysis of meteoritic chemicals and possible abiotic synthetic paths suggests that postulated paths to the origin of life on Earth are unlikely to operate in CSA. We conclude that, contrary to expectation, sulfuric acid is an interesting candidate solvent for life, but further work is needed to identify a plausible route for life to originate in it.

Quinoline Photobasicity: Investigation within Water-Soluble Light-Responsive Copolymers

Quinoline photobases exhibit a distinctly higher pKa in their electronically excited state than in the ground state, thereby enabling light-controlled proton transfer reactions, for example, in molecular catalysis. The absorption of UV light translates to a pKa jump of approximately 10 units, as established for small-molecule photobases. This contribution presents the first synthesis of quinoline-based polymeric photobases prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization. The integration of quinolines as photobase chromophores within copolymers offers new possibilities for light-triggered proton transfer in nanostructured materials, that is, in nanoparticles, at surfaces, membranes and interfaces. To exploit the light-triggered reactivity of photobases within such materials, we first investigated how the ground- and excited-state properties of the quinoline unit changes upon polymer integration. To address this matter, we combined absorption and emission spectroscopy with time-resolved transient-absorption studies to reveal photoinduced proton-transfer dynamics in various solvents. The results yield important insights into the thermodynamic and kinetic properties of these polymeric quinoline photobases.

Broadband fluorescence reveals mechanistic differences in excited-state proton transfer to protic and aprotic solvents

Excited-state proton transfer (ESPT) to solvent is often explained according to the two-step Eigen-Weller model including a contact ion pair (CIP*) as an intermediate, but general applicability of the model has not been thoroughly examined. Furthermore, examples of the spectral identification of CIP* are scarce. Here, we report on a detailed investigation of ESPT to protic (H₂O, D₂O, MeOH and EtOH) and aprotic (DMSO) solvents utilizing a broadband fluorescence technique with sub-200 fs time resolution. The time-resolved spectra are decomposed into contributions from the protonated and deprotonated species and a clear signature of CIP* is identified in DMSO and MeOH. Interestingly, the CIP* intermediate is not observable in aqueous environment although the dynamics in all solvents are multi-exponential. Global analysis based on the Eigen-Weller model is satisfactory in all solvents, but the marked mechanistic differences between aqueous and organic solvents cast doubt on the physical validity of the rate constants obtained.

Photoacid-Catalyzed Friedel-Crafts Arylation of Carbonyls

In this report, we demonstrate that visible-light-induced thiourea photoacids catalyze C-C bond-forming reactions. Upon photoirradiation, Schreiner's thiourea [(N,N'-bis[3,5-bis(trifluoromethyl)phenyl]-thiourea] catalyzes the double Friedel-Crafts addition of indoles to aldehydes and isatins to form the corresponding triarylmethanes and 3,3'-diarylindolin-2-ones. This protocol is amenable to a wide range of aldehyde and isatin electrophiles, as well as a variety of electronically diverse indoles. Mechanistic studies show that light is required for reaction initiation.

Kinetic and spectroscopic responses of pH-sensitive nanoparticles: influence of the silica matrix

Intracellular pH sensing with fluorescent nanoparticles is an emerging topic as pH plays several roles in physiology and pathologic processes. Here, nanoparticle-sized pH sensors (diameter far below 50 nm) for fluorescence imaging have been described. Consequently, a fluorescent derivative of pH-sensitive hydroxypyrene with pK _a = 6.1 was synthesized and subsequently embedded in core and core-shell silica nanoparticles via a modified Stöber process. The detailed fluorescence spectroscopic characterization of the produced nanoparticles was carried out for retrieving information about the environment within the nanoparticle core. Several steady-state and time-resolved fluorescence spectroscopic methods hint to the screening of the probe molecule from the solvent, but it sustained interactions with hydrogen bonds similar to that of water. The incorporation of the indicator dye in the water-rich silica matrix neither changes the acidity constant nor dramatically slows down the protonation kinetics. However, cladding by another SiO₂ shell leads to the partial substitution of water and decelerating the response of the probe molecule toward pH. The sensor is capable of monitoring pH changes in a physiological range by using ratiometric fluorescence excitation with λ _ex = 405 nm and λ _ex = 488 nm, as confirmed by the confocal fluorescence imaging of intracellular nanoparticle uptake.

Adiabatic deprotonation as an important competing pathway to ESIPT in photoacidic 2-phenylphenols

ESIPT (Excited State Intramolecular Proton Transfer) to C atom in 2-phenylphenol is known to be an intrinsically inefficient process. However, to the best of our knowledge, a structure-ESIPT efficiency relationship has not been elucidated yet. Here, we show that there exists a competitive interplay between photoacidity and ESIPT efficiency for the 2-phenylphenol system. The attachment of electron withdrawing groups to the phenol moiety promotes adiabatic deprotonation in the excited state and diminishes the charge transfer character of the excitations, and both these factors contribute in decreasing the ESIPT reaction yield. On the other hand, unfavorable conformational distribution in the ground state also appears as another important aspect responsible for the low ESIPT extent of 2-phenylphenol. A new derivative bearing electron donating, bulky substituents at ortho and para positions of the phenol ring shows an outstanding ESIPT performance, which demonstrates that the efficiency of the process can be significantly enhanced by modifying the substitution pattern. We anticipate that our results will help to guide the molecular designing of new compounds with high ESIPT efficiency.