Cation-Anion and Anion-CO2 Interactions in Triethyl(octyl)phosphonium Ionic Liquids with Aprotic Heterocyclic Anions (AHAs)

Reactive capture and electrochemical conversion of CO2 with ionic liquids and deep eutectic solvents

Ionic liquids (ILs) and deep eutectic solvents (DESs) have tremendous potential for reactive capture and conversion (RCC) of CO2 due to their wide electrochemical stability window, low volatility, and high CO2 solubility. There is environmental and economic interest in the direct utilization of the captured CO2 using electrified and modular processes that forgo the thermal- or pressure-swing regeneration steps to concentrate CO2, eliminating the need to compress, transport, or store the gas. The conventional electrochemical conversion of CO2 with aqueous electrolytes presents limited CO2 solubility and high energy requirement to achieve industrially relevant products. Additionally, aqueous systems have competitive hydrogen evolution. In the past decade, there has been significant progress toward the design of ILs and DESs, and their composites to separate CO2 from dilute streams. In parallel, but not necessarily in synergy, there have been studies focused on a few select ILs and DESs for electrochemical reduction of CO2, often diluting them with aqueous or non-aqueous solvents. The resulting electrode-electrolyte interfaces present a complex speciation for RCC. In this review, we describe how the ILs and DESs are tuned for RCC and specifically address the CO2 chemisorption and electroreduction mechanisms. Critical bulk and interfacial properties of ILs and DESs are discussed in the context of RCC, and the potential of these electrolytes are presented through a techno-economic evaluation.

Dual-Tuning Azole-Based Ionic Liquids for Reversible CO2 Capture from Ambient Air

A strategy of tuning azole-based ionic liquids for reversible CO2 capture from ambient air was reported. Through tuning the basicity of anion as well as the type of cation, an ideal azole-based ionic liquid with both high CO2 capacity and excellent stability was synthesized, which exhibited a highest single-component isotherm uptake of 2.17 mmol/g at the atmospheric CO2 concentration of 0.4 mbar at 30 °C, even in the presence of water. The bound CO2 can be released by relatively mild heating of the IL-CO2 at 80 °C, which makes it promising for energy-efficient CO2 desorption and sorbent regeneration, leading to excellent reversibility. To the best of our knowledge, these azole-based ionic liquids are superior to other adsorbent materials for direct air capture due to their dual-tunable properties and high CO2 capture efficiency, offering a new prospect for efficient and reversible direct air capture technologies.

New Functionalized Di-substituent Imidazolium Ionic Liquids as Superior Faster Absorbents for Carbon Dioxide Gas

Functionalization of room temperature liquids based on disubstituted imidazolium ionic liquids represents a promising avenue for tailoring their tunable physicochemical properties and expanding their potential application as green solvents to capture carbon dioxide as a greenhouse gas. In this work, new hydroxyl functionalized imidazolium ionic liquids were prepared from condensation of ethanolamine with glyoxal and formalin in the presence of acetic acid as catalyst. The chemical modification of the hydroxyl groups with epichlorohydrine added new hydroxylpropanoxychloride groups on the imidazolium cation that were quaternized with N-methylimidazolium chloride to produce new imidazolium acetate ionic liquids. The chemical structures, thermal stability, and thermal characteristics of the prepared imidazolium ionic liquids were evaluated. The incorporation of functionalized 1-chloro-2-hydroxypropanoxy and N-methylimidazolium chloride groups into the chemical structure of the imidazolium cations improved the thermal properties of the prepared ionic liquids. The application of the prepared ionic liquids as pure or mixed solvents with saline water to capture CO2 under atmospheric and 55.2 bar pressures was evaluated at room temperature. The data indicate that the prepared ionic liquids have superior CO2 adsorption/desorption rate in short time during 30 and 15 min and that their CO2 capture efficiency increased from 6.2 to 16.8 molCO2/kgIIL and from 9.1 to 20.0 molCO2/kgIIL at atmospheric and 55.2 bar pressures, respectively.

Tuning Functionalized Ionic Liquids for CO2 Capture

The increasing concentration of CO₂ in the atmosphere is related to global climate change. Carbon capture, utilization, and storage (CCUS) is an important technology to reduce CO₂ emissions and to deal with global climate change. The development of new materials and technologies for efficient CO₂ capture has received increasing attention among global researchers. Ionic liquids (ILs), especially functionalized ILs, with such unique properties as almost no vapor pressure, thermal- and chemical-stability, non-flammability, and tunable properties, have been used in CCUS with great interest. This paper focuses on the development of functionalized ILs for CO₂ capture in the past decade (2012~2022). Functionalized ILs, or task-specific ILs, are ILs with active sites on cations or/and anions. The main contents include three parts: cation-functionalized ILs, anion-functionalized ILs, and cation-anion dual-functionalized ILs for CO₂ capture. In addition, classification, structures, and synthesis of functionalized ILs are also summarized. Finally, future directions, concerns, and prospects for functionalized ILs in CCUS are discussed. This review is beneficial for researchers to obtain an overall understanding of CO₂-philic ILs. This work will open a door to develop novel IL-based solvents and materials for the capture and separation of other gases, such as SO₂, H₂S, NOx, NH₃, and so on.

Ammonium-, phosphonium- and sulfonium-based 2-cyanopyrrolidine ionic liquids for carbon dioxide fixation

The development of carbon dioxide (CO₂) scavengers is an acute problem nowadays because of the global warming problem. Many groups around the globe intensively develop new greenhouse gas scavengers. Room-temperature ionic liquids (RTILs) are seen as a proper starting point to synthesize more environmentally friendly and high-performance sorbents. Aprotic heterocyclic anions (AHA) represent excellent agents for carbon capture and storage technologies. In the present work, we investigate RTILs in which both the weakly coordinating cation and AHA bind CO₂. The ammonium-, phosphonium-, and sulfonium-based 2-cyanopyrrolidines were investigated using the state-of-the-art method to describe the thermochemistry of the CO₂ fixation reactions. The infrared spectra and electronic and structural properties were simulated at the hybrid density functional level of theory to characterize the reactants and products of the chemisorption reactions. We conclude that the proposed CO₂ capturing mechanism is thermodynamically allowed and discuss the difference between different families of RTILs. Quite unusually, the intramolecular electrostatic attraction plays an essential role in stabilizing the zwitterionic products of the CO₂ chemisorption. The difference in chemisorption performance between the families of RTILs is linked to sterical hindrances and nucleophilicities of the α- and β-carbon atoms of the aprotic cations. Our results rationalize previous experimental CO₂ sorption measurements (Brennecke et al., 2021).

Recent advances in NMR spectroscopy of ionic liquids

This review presents recent developments in the application of NMR spectroscopic techniques in the study of ionic liquids. NMR has been the primary tool not only for the structural characterization of ionic liquids, but also for the study of dynamics. The presence of a host of NMR active nuclei in ionic liquids permits widespread use of multinuclear NMR experiments. Chemical shifts and multinuclear coupling constants are used routinely for the structure elucidation of ionic liquids and of products formed by their covalent interactions with other materials. Also, the availability of a multitude of NMR techniques has facilitated the study of dynamical processes in them. These include the use of NOESY to study inter-ionic interactions, pulsed-field gradient techniques for probing transport properties, and relaxation measurements to elucidate rotational dynamics. This review will focus on the application of each of these techniques to investigate ionic liquids.

Developing Structural First Principles for Alkylated Triphenylphosphonium-Based Ionic Liquids

While ionic liquids have proved to be versatile materials for a wide spectrum of applications, e.g., energy, materials, and medicine, several challenges remain concerning the rational design of novel materials. In light of this, a series of four triphenylphosphonium-based ionic liquids have been synthesized for the first time. These compounds exhibit high thermal stability with decomposition temperatures up to 450 °C. Their solid-state structures are characterized by single-crystal X-ray diffraction and the intermolecular interactions rigorously analyzed via Hirshfeld surface analysis. It was found that the unique geometries of the anions used in the study form distinct interactions with the cations. The interactions in the crystalline state are correlated with the thermal properties of the four ionic liquids to rationalize the melting points and phase transitions for each compound. The observed arrangements of the alkyl chains on the cations are investigated computationally to gain an understanding of how rotational freedom may impact the thermal properties of the compounds. By intention, each IL reported in this work offers a unique property profile and contributes to the ever-growing ionic liquid catalog.

Quantification of Ylide Formation in Phosphonium-Based Ionic Liquids Reacted with CO2

Phosphonium-based ionic liquids (ILs) paired with aprotic heterocyclic anions (AHAs) are found to react with CO₂ to form both a carbamate product and a carboxyl product. The carboxyl product is formed primarily at elevated temperatures through the formation of a phosphonium ylide intermediate. The formation of the carboxyl product leads to the formation of the neutral azole, which can lead to an irreversible process if the neutral azole is sufficiently volatile. To understand how the ILs would behave in a CO₂ capture process operated at elevated temperatures, it was necessary to quantify the two reaction products. CO₂ was reacted with seven different AHA ILs to determine the equilibrium amounts of carbamate and carboxyl, the equilibrium constants for both reactions, and the rate of CO₂ absorption by each reaction path. The reactions were tracked and quantified in situ by using ATR-FTIR spectroscopy, while NMR spectroscopy was used after equilibrium was reached to determine the extent of each reaction at multiple temperatures and pressures. It was found that both the basicity and molecular size of the anion play key roles in the formation of the phosphonium ylide. In the extreme case of [P₆₆₆₁₄][4-Triaz] only half of the reacted product was the desired carbamate at 60 °C. Although there is a significant amount of the carboxyl product formed, the carbamate is kinetically favored.

1,5,7-Triazabicyclo[4.4.0]dec-5-ene Enhances Activity of Peroxide Intermediates in Phosphine-Free α-Hydroxylation of Ketones

The critical role of double hydrogen bonds was addressed for the aerobic α-hydroxylation of ketones catalyzed by 1,5,7-triazabicyclo[4.4.0]dec-5-ene (TBD), in the absence of either a metal catalyst or phosphine reductant. Experimental and theoretical investigations were performed to study the mechanism. In addition to initiating the reaction by proton abstraction, a more important role of TBD was revealed, that is, to enhance the oxidizing ability of peroxide intermediates, allowing DMSO to be used rather than commonly used phosphine reductants. Further characterizations with nuclear Overhauser effect spectroscopy (NOESY) confirmed the presence of double hydrogen bonds between TBD and the ketone, and kinetic studies suggested the attack of dioxygen on the TBD-enol adduct to be the rate-determining step. This work should encourage the application of TBD as a catalyst for oxidations.