Cylindrical Confinement of Nanocolloidal Cholesteric Liquid Crystal

Modulation of Tannic Acid on the Cholesteric Structure of Cellulose Nanocrystals

The chiral nematic phase structure, formed by the self-assembly of cellulose nanocrystals (CNCs) in an aqueous suspension and maintained in a solid film, shows great potential for optical applications. To achieve complex structures in optical devices, it is crucial to subject CNCs to specific shearing processes, such as spinning and printing. Understanding the structural and property changes of the CNC liquid crystal phase in these processes is of utmost importance. In this study, we investigated the effect of adding tannic acid (TA) on the rheological properties and cholesteric phase structures of CNCs/TA mixed suspensions. By calculating the surface site interaction points, we observed that TA can adsorb onto the surface of CNC rods in suspensions through hydrogen bonding. Through characterization techniques, such as polarized optical microscopy, rheology, and synchrotron SAXS, we examined the effects of TA addition on the microstructure and rheological properties of the CNC liquid crystal phase and clarified the change relating to the system composition. Under the same CNC concentration, the volume fraction of the anisotropic phase, the pitch, and the rod spacing of the cholesteric phase were not significantly affected by the addition of TA. However, the system viscosity was significantly reduced with the appropriate amount of TA (2 wt %), in a wide range of CNC concentrations (up to 15 wt % CNCs). The flow indexes (n) in Region I and Region III of steady-state shear curves of CNCs/TA systems (11-15 wt % CNCs) were compared. Moreover, we introduced the well-established theoretical models for liquid crystal polymers to tentatively interpret Region I of the CNCs/TA cholesteric phase and realized that increased numbers of smaller cholesteric-phase domains in the CNCs/TA system and interfacial modification by TA may contribute to the fluidity change. The feature of the domain texture of CNCs/TA systems is verified by polarized optical microscopy observations.

Structural Color from Cellulose Nanocrystals or Chitin Nanocrystals: Self-Assembly, Optics, and Applications

Widespread concerns over the impact of human activity on the environment have resulted in a desire to replace artificial functional materials with naturally derived alternatives. As such, polysaccharides are drawing increasing attention due to offering a renewable, biodegradable, and biocompatible feedstock for functional nanomaterials. In particular, nanocrystals of cellulose and chitin have emerged as versatile and sustainable building blocks for diverse applications, ranging from mechanical reinforcement to structural coloration. Much of this interest arises from the tendency of these colloidally stable nanoparticles to self-organize in water into a lyotropic cholesteric liquid crystal, which can be readily manipulated in terms of its periodicity, structure, and geometry. Importantly, this helicoidal ordering can be retained into the solid-state, offering an accessible route to complex nanostructured films, coatings, and particles. In this review, the process of forming iridescent, structurally colored films from suspensions of cellulose nanocrystals (CNCs) is summarized and the mechanisms underlying the chemical and physical phenomena at each stage in the process explored. Analogy is then drawn with chitin nanocrystals (ChNCs), allowing for key differences to be critically assessed and strategies toward structural coloration to be presented. Importantly, the progress toward translating this technology from academia to industry is summarized, with unresolved scientific and technical questions put forward as challenges to the community.

Self-assembly of cellulose nanocrystals confined to square capillaries

Biological systems exploit restricted degrees of freedom to drive self-assembly of nano- and microarchitectures. Simplified systems, such as colloidal nanoparticles that behave as lyotropic liquid crystalline mesophases in confined geometric spaces, may be used to mimic biological structures. Cellulose nanocrystals (CNCs) are colloidally stable nanoparticles that self-assemble into chiral nematic (ChN) liquid crystalline mesophases. To date, the self-assembly of ChN mesophases of CNCs has been studied under confinement conditions within curved surfaces or under drying conditions that impose curvatures that can be exploited to control ChN ordering; however, their self-assembly has not been investigated in geometries with square cross-sections under static conditions. Here, we show that because of surface anchoring on perpendicular surfaces, the ChN CNC phase is unable to bend with the 90° angle of the square capillary under increasing confinement. Instead, the ChN phase forms radial layers in the shape of concentric squircle shells. With increasing layer distance from the capillary wall, the squircles transition into concentric cylinder shells. In larger capillaries, the radial shell layers appear as a continuous spiral pattern that engulfs fragmented ChN pseudolayers, a defect to accommodate the cylindrical confinement of the mesophase. These results are useful for understanding the fundamentals of self-assembling systems and development of new technologies.

Flow and assembly of cellulose nanocrystals (CNC): A bottom-up perspective - A review

Cellulosic sources, such as lignocellulose-rich biomass, can be mechanically or acid degraded to produce inclusions called cellulose nanocrystals (CNCs). They have several uses in the sectors of biomedicine, photonics, and material engineering because of their biodegradability, renewability, sustainability, and mechanical qualities. The processing and design of CNC-based products are inextricably linked to the rheological behaviour of CNC suspension or in combination with other chemicals, such as surfactants or polymers; in this context, rheology offers a significant link between microstructure and macro scale flow behaviour that is intricately linked to material response in applications. The flow behaviour of CNC items must be properly specified in order to produce goods with value-added characteristics. In this review article, we provide new research on the shear rheology of CNC dispersion and CNC-based hydrogels in the linear and nonlinear regime, with storage modulus values reported to range from ~10^-3 to 10³ Pa. Applications in technology and material science are also covered simultaneously. We carefully examined the effects of charge density, aspect ratio, concentration, persistence length, alignment, liquid crystal formation, the cause of chirality in CNCs, interfacial behaviour and interfacial rheology, linear and nonlinear viscoelasticity of CNC suspension in bulk and at the interface using the currently available literature.

Advanced cellulose nanocrystals (CNC) and cellulose nanofibrils (CNF) aerogels: Bottom-up assembly perspective for production of adsorbents

The most common and abundant polymer in nature is the linear polysaccharide cellulose, but processing it requires a new approach since cellulose degrades before melting and does not dissolve in ordinary organic solvents. Cellulose aerogels are exceptionally porous (>90 %), have a high specific surface area, and have low bulk density (0.0085 mg/cm³), making them suitable for a variety of sophisticated applications including but not limited to adsorbents. The production of materials with different qualities from the nanocellulose based aerogels is possible thanks to the ease with which other chemicals may be included into the structure of nanocellulose based aerogels; despite processing challenges, cellulose can nevertheless be formed into useful, value-added products using a variety of traditional and cutting-edge techniques. To improve the adsorption of these aerogels, rheology, 3-D printing, surface modification, employment of metal organic frameworks, freezing temperature, and freeze casting techniques were all investigated and included. In addition to exploring venues for creation of aerogels, their integration with CNC liquid crystal formation were also explored and examined to pursue "smart adsorbent aerogels". The objective of this endeavour is to provide a concise and in-depth evaluation of recent findings about the conception and understanding of nanocellulose aerogel employing a variety of technologies and examination of intricacies involved in enhancing adsorption properties of these aerogels.

Chiral Liquid Crystalline Properties of Cellulose Nanocrystals: Fundamentals and Applications

By using an independent self-assembly process that is occasionally controlled by evaporation, cellulose nanocrystals (CNCs) may create films (pure or in conjunction with other materials) that have iridescent structural colors. The self-forming chiral nematic structures and environmental safety of a new class of photonic liquid crystals (LCs), referred to as CNCs and CNC-embedded materials, make them simple to make and treat. The structure of the matrix interacts with light to give structural coloring, as opposed to other dye pigments, which interact with light by adsorption and reflection. Understanding how CNC self-assembly constructs structures is vital in several fields, including physics, science, and engineering. To constructure this review, the colloidal characteristics of CNC particles and their behavior during the formation of liquid crystals and gelling were studied. Then, some of the recognized applications for these naturally occurring nanoparticles were summarized. Different factors were considered, including the CNC aspect ratio, surface chemistry, concentration, the amount of time needed to produce an anisotropic phase, and the addition of additional substances to the suspension medium. The effects of alignment and the drying process conditions on structural changes are also covered. The focus of this study however is on the optical properties of the films as well as the impact of the aforementioned factors on the final transparency, iridescent colors, and versus the overall response of these bioinspired photonic materials. Control of the examined factors was found to be necessary to produce reliable materials for optoelectronics, intelligent inks and papers, transparent flexible support for electronics, and decorative coatings and films.

Using rotation to organize cellulose nanocrystals inside a fiber

We demonstrate for the first time that continuous rotation of a mixture of cellulose nanocrystals (CNCs) and monomer in a capillary tube results in well-organized structures. In the experiments, a capillary tube charged with an aqueous suspension of CNCs and hydroxyethyl acrylate was continuously rotated, then the structure was fixed in place by UV-initiated polymerization. The organization of the liquid crystalline structure that forms inside the tube depends on the rotation conditions and is captured in the polymer resin. The effects of rotation speed, rotation angle and CNC concentration were evaluated and are discussed based on fluid dynamic models. We demonstrate that it is possible to develop a core-shell fiber through this technique based on secondary Dean flow. The outer shell of the fiber shows well-ordered concentric rings with chiral nematic structure, while the inner core remains isotropic. Such fibers have potential applications in the field of optics. Overall, we demonstrate that rotation could be applied as a novel method to organize liquid crystals in a confined environment.