Exploration of CO2-Philicity of Poly(vinyl acetate-co-alkyl vinyl ether) through Molecular Modeling and Dissolution Behavior Measurement

Systematic Review of Solubility, Thickening Properties and Mechanisms of Thickener for Supercritical Carbon Dioxide

Supercritical carbon dioxide (CO2) has extremely important applications in the extraction of unconventional oil and gas, especially in fracturing and enhanced oil recovery (EOR) technologies. It can not only relieve water resource wastage and environmental pollution caused by traditional mining methods, but also effectively store CO2 and mitigate the greenhouse effect. However, the low viscosity nature of supercritical CO2 gives rise to challenges such as viscosity fingering, limited sand-carrying capacity, high filtration loss, low oil and gas recovery efficiency, and potential rock adsorption. To overcome these challenges, low-rock-adsorption thickeners are required to enhance the viscosity of supercritical CO2. Through research into the literature, this article reviews the solubility and thickening characteristics of four types of polymer thickeners, namely surfactants, hydrocarbons, fluorinated polymers, and silicone polymers in supercritical CO2. The thickening mechanisms of polymer thickeners were also analyzed, including intermolecular interactions, LA-LB interactions, hydrogen bonding, and functionalized polymers, and so on.

Molecular Dynamics Simulation on Thickening and Solubility Properties of Novel Thickener in Supercritical Carbon Dioxide

Supercritical CO2 has wide application in enhancing oil recovery, but the low viscosity of liquid CO2 can lead to issues such as poor proppant-carrying ability and high filtration loss. Therefore, the addition of thickening agents to CO2 is vital. Hydrocarbon polymers, as a class of green and sustainable materials, hold tremendous potential for acting as thickeners in supercritical CO2 systems, and PVAc is one of the best-performing hydrocarbon thickeners. To further improve the viscosity enhancement and solubility of PVAc, here we designed a novel polymer structure, PVAO, by introducing CO2-affine functional groups to PVAc. Molecular dynamics simulations were adopted to analyze viscosity and relevant solubility parameters systematically. We found that PVAO exhibits superior performance, with a viscosity enhancement of 1.5 times that of PVAc in supercritical CO2. While in the meantime, PVAO maintains better solubility characteristics than PVAc. Our findings offer insights for the future design of other high-performance polymers.

Factor analysis and mechanism disclosure of supercritical CO2 filtration behavior in tight shale reservoirs

As an important working fluid in tight shale reservoir, supercritical CO₂ has been proven to improve oil recovery efficiently. However, the high filtration caused by the low viscosity of pure supercritical CO₂ hinders its development. The research objective of this investigation is to explore the filtration of supercritical CO₂ with a branched siloxane (BTMT) as a CO₂ thickener and filtration-reducing agent, and analyze the influence level of some parameters about rock core and chemicals on the CO₂ filtration in the tight shale reservoir by using response surface method (RSM). The results demonstrate that the rising temperature causes a gradually increasing filtration, but filtration coefficient (f) decreases with increasing the pressure difference P, injection speed, and thickener concentration. The thickener concentration is the factor that causes the greatest change in filtration coefficient according to the response surface method, and the injection speed has the smallest effect on the filtration. The viscosity of fracturing fluid is the main characterization parameter leading to change of filtration coefficient, all factors that contribute to increasing the viscosity of the fracturing fluid will lead to a reduction in the filtration coefficient and an enhanced oil recovery. In addition, the adsorption and reservoir residue of BTMT on low-permeability shale were subordinated to a Langmuir monolayer theory, and a low residual of BTMT in shale can prevent thickeners and fracturing fluids from damaging shale reservoirs. The improvement of thickener and CO₂ fracturing technology provided a basic reference for shale exploitation, greenhouse effect, and reservoir protection.

Dispersibility of Poly(vinyl acetate) Modified Silica Nanoparticles in Carbon Dioxide with Several Cosolvents

The dispersibility and stabilization of silica nanoparticles with surface-capped poly(vinyl acetate) (PVAc) chains are examined in carbon dioxide with four different cosolvents. Three surface coverages of silica-PVAc were formed by using different weight ratios of the silica and PVAc. The dispersibilities of three silica-PVAc nanoparticles in CO₂ with the four cosolvents were tested in a rotatable high-pressure variable-volume view cell. The effects of surface coverage, cosolvent type, pressure, and particle concentration on dispersion were investigated. Results show that, in the experimental pressure range (5.5 to 20 MPa), the pressure has no significant effect on the dispersion of nanoparticles, and the cosolvent is the key factor in dispersing silica-PVAc particles in CO₂. 1-Butanol is an adequate cosolvent to disperse silica-PVAc in CO₂ with any coverage of PVAc on the surface of the particles when the concentration of particles is smaller than 0.31 wt %. Ethanol can only improve the dispersibility of particles with a high surface coverage of PVAc when the concentration of particles is smaller than 0.14 wt %. 1-Hexanol and ethyl acetate cannot disperse the particles in CO₂ with any coverage of PVAc. Molecular dynamics simulations were carried out to study the nanoparticle-CO₂-cosolvent dispersions. Results suggest that 1-butanol has a good solubility in the CO₂ condensed phase and can effectively absorb onto the nanoparticle surface, which help to prevent the formation of nanoparticle aggregation. The precipitation of nanoparticles in the nanoparticle/1-hexanol/CO₂ and nanoparticle/ethyl acetate/CO₂ systems is attributed to the relatively low solubility of CO₂ in 1-hexanol and ethyl acetate. The precipitation of nanoparticles in the nanoparticle/ethanol/CO₂ system is the result of less hindrance of ethanol molecules to the aggregation of nanoparticles.

Achieving solubility alteration with functionalized polydimethylsiloxane for improving the viscosity of supercritical CO2 fracturing fluids

Thickened carbon dioxide flow state.

Preparation and Performance of Supercritical Carbon Dioxide Thickener

The low sand-carrying problem caused by the low viscosity of supercritical carbon dioxide (SC-CO2) limits the development of supercritical CO2 fracturing technology. In this study, a molecular simulation method was used to design a fluorine-free solvent-free SC-CO2 thickener 1,3,5,7-tetramethylcyclotetrasiloxane (HBD). Simulations and experiments mutually confirm that HBD-1 and HBD-2 have excellent solubility in SC-CO2. The apparent viscosity of SC-CO2 after thickening was evaluated with a self-designed and assembled capillary viscometer. The results show that when the concentration of HBD-2 is 5 wt.% (305.15 K, 10 MPa), the viscosity of SC-CO2 increases to 4.48 mPa·s. Combined with the capillary viscometer and core displacement device, the low damage of SC-CO2 fracturing fluid to the formation was studied. This work solves the pollution problems of fluoropolymers and co-solvents to organisms and the environment and provides new ideas for the molecular design and research of SC-CO2 thickeners.

Insight into the Intermolecular Interaction and Free Radical Polymerizability of Methacrylates in Supercritical Carbon Dioxide

High pressure in situ Fourier transfer infrared/near infrared technology (HP FTIR/NIR) along with theoretical calculation of density functional theory (DFT) method was employed. The solvation behaviors and the free radical homopolymerization of methyl methacrylate (MMA), methacrylate acid (MAA), trifluoromethyl methacrylate (MTFMA) and trifluoromethyl methacrylate acid (TFMAA) in scCO2 were systematically investigated. Interestingly, the previously proposed mechanism of intermolecular-interaction dynamically-induced solvation effect (IDISE) of monomer in scCO2 is expected to be well verified/corroborated in view that the predicted solubility order of the monomers in scCO2 via DFT calculation is ideally consistent with that observed via HP FTIR/NIR. It is shown that MMA and MAA can be easily polymerized, while the free radical polymerizability of MTFMA is considerably poor and TFMAA cannot be polymerized via the free radical initiators. The α trifluoromethyl group (-CF3) may effectively enhance the intermolecular hydrogen bonding and restrain the diffusion of the monomer in scCO2. More importantly, the strong electron-withdrawing inductive effect of -CF3 to C=C may distinctly decrease the atomic charge of the carbon atom in the methylene (=CH2). These two factors are believed to be predominantly responsible for the significant decline of the free radical polymerizability of MTFMA and the other alkyl 2-trifluoromethacrylates in scCO2.

Thickening Supercritical CO₂ with π-Stacked Co-Polymers: Molecular Insights into the Role of Intermolecular Interaction

Vinyl Benzoate/Heptadecafluorodecyl acrylate (VBe/HFDA) co-polymers were synthesized and characterized as thickening agents for supercritical carbon dioxide (SC-CO₂). The solubility and thickening capability of the co-polymer samples in SC-CO₂ were evaluated by measuring cloud point pressure and relative viscosity. The molecular dynamics (MD) simulation for all atoms was employed to simulate the microscopic molecular behavior and the intermolecular interaction of co-polymer⁻CO₂ systems. We found that the introduction of VBe group decreased the polymer⁻CO₂ interaction and increased the polymer⁻polymer interaction, leading to a reduction in solubility of the co-polymers in SC-CO₂. However, the co-polymer could generate more effective inter-chain interaction and generate more viscosity enhancement compared to the Poly(Heptadecafluorodecyl) (PHFDA) homopolymer due to the driving force provided by π-π stacking of the VBe groups. The optimum molar ratio value for VBe in co-polymers for the viscosity enhancement of SC-CO₂ was found to be 0.33 in this work. The P(HFDA_0.67-co-VBe_0.33) was able to enhance the viscosity of SC-CO₂ by 438 times at 5 wt. %. Less VBe content would result in a lack of intermolecular interaction, although excessive VBe content would generate more intramolecular π-π stacking and less intermolecular π-π stacking. Both conditions reduce the thickening capability of the P(HFDA-co-VBe) co-polymer. This work presented the relationship between structure and performance of the co-polymers in SC-CO₂ by combining experiment and molecular simulations.

Modeling Solvation in Supercritical CO2

In recent decades, a microscopic understanding of solute-solvent intermolecular interactions has been key to advances in technologies based on supercritical carbon dioxide. In many cases, computational work has provided the impetus for new discoveries, shedding new light on important concepts such as the local structure around the solute in the supercritical medium, the influence of the peculiar properties of the latter on the molecular behavior of dissolved substances and, importantly, CO₂ -philicity. In this Review, the theoretical work that has been relevant to these developments is surveyed and, by presenting some crucial open questions, the possible routes to achieving further progress based on the interplay between theory and experiments is discussed.

Microcosmic understanding on thickening capability of copolymers in supercritical carbon dioxide: the key role of π–π stacking

Thickening capability evaluations and microscopic understanding of St–HFDA copolymers in SC-CO₂.

Structure-Property Relationships in CO2-philic (Co)polymers: Phase Behavior, Self-Assembly, and Stabilization of Water/CO2 Emulsions

This Review provides comprehensive guidelines for the design of CO2-philic copolymers through an exhaustive and precise coverage of factors governing the solubility of different classes of polymers. Starting from computational calculations describing the interactions of CO2 with various functionalities, we describe the phase behavior in sc-CO2 of the main families of polymers reported in literature. The self-assembly of amphiphilic copolymers of controlled architecture in supercritical carbon dioxide and their use as stabilizers for water/carbon dioxide emulsions then are covered. The relationships between the structure of such materials and their behavior in solutions and at interfaces are systematically underlined throughout these sections.