Dielectric Relaxation Study at Ambient and Elevated Pressure of the Modeled Lipophilic Drug Fenofibrate

Understanding Fenofibrate Release from Bare and Modified Mesoporous Silica Nanoparticles

To investigate the impact of the surface functionalization of mesoporous silica nanoparticle (MSN) carriers in the physical state, molecular mobility and the release of Fenofibrate (FNB) MSNs with ordered cylindrical pores were prepared. The surface of the MSNs was modified with either (3-aminopropyl) triethoxysilane (APTES) or trimethoxy(phenyl)silane (TMPS), and the density of the grafted functional groups was quantified via ¹H-NMR. The incorporation in the ~3 nm pores of the MSNs promoted FNB amorphization, as evidenced via FTIR, DSC and dielectric analysis, showing no tendency to undergo recrystallization in opposition to the neat drug. Moreover, the onset of the glass transition was slightly shifted to lower temperatures when the drug was loaded in unmodified MSNs, and MSNs modified with APTES composite, while it increased in the case of TMPS-modified MSNs. Dielectric studies have confirmed these changes and allowed researchers to disclose the broad glass transition in multiple relaxations associated with different FNB populations. Moreover, DRS showed relaxation processes in dehydrated composites associated with surface-anchored FNB molecules whose mobility showed a correlation with the observed drug release profiles.

How does pressure affect the molecular dynamics, intramolecular interactions, and the relationship between structural (α) and secondary (JG-β) relaxation above and below the glass transition temperature in binary mixtures of H-bonded API - probucol and acetylated saccharides?

In this paper, the molecular dynamics as well as inter- and intramolecular interactions in the homogenous solid dispersions (SDs) of active pharmaceutical ingredient - probucol (PRO) with acetylated glucose (acGLU), acetylated sucrose (acSUC), and sucrose acetoisobutyrate (aibSUC), prepared in 5:1 molar ratio, have been investigated using broadband dielectric (BD) and Fourier transform infrared (FTIR) spectroscopy. Importantly, high pressure dielectric measurements revealed that as for neat PRO, a breakdown of the isochronal structural (α) and JG-β exact superpositioning, due to increasing separation between both processes under compression, can also be detected in its mixtures with acetylated saccharides (acSACCHs). Furthermore, the analysis of temperature dependences of JG-β-relaxation times for PRO and PRO-acSACCH SDs at selected isobaric conditions indicated the increase in the cooperativity of the secondary process (reflected in the value of the activation entropy, ΔS_β) at elevated pressure in all systems. The mere addition of the small amount of excipient to neat PRO (p = 0.1 MPa) resulted in a greater value of ΔS_β (it was the most noticeable in the case of aibSUC). Further FTIR studies carried out on the pressure densified glasses of PRO, and binary mixtures suggested that the observed changes in the cooperativity of the JG-β-process, as well as the failure of the exact isochronal superpositioning of α- and JG-β relaxation times, are due to varying H-bond pattern in the examined single- and two-component systems at high compression/in the presence of saccharide.

Influence of High Pressure on the Local Order and Dynamical Properties of the Selected Azole Antifungals

Dielectric studies under various temperature (T) and pressure (p) conditions on five active pharmaceutical ingredients (APIs) with antifungal properties-itraconazole (ITZ), posaconazole (POS), terconazole (TER), ketoconazole (KET), and fluconazole (FLU)-were carried out. We have thoroughly studied the connection between the pressure coefficient of the glass transition temperature (dT_g/dp) and the activation volume of both relaxation modes (ΔV_α, ΔV_δ/α') with respect to the molecular weight (M_w) or molar volume (V_m) in these systems. Besides, high pressure data revealed that the time scale separation between α- and δ- or α'-processes increases with pressure in ITZ and TER. What is more, the activation entropy, which is a measure of cooperativity, calculated from the Eyring model for the secondary (β)-relaxation in ITZ and POS, increased and decreased, respectively, in the compressed samples. To understand these peculiar results, we have carried out X-ray diffraction (XRD) measurements on the pressure-densified glasses and found that pressure may induce frustration in molecular organization and destroy the medium-range order while enhancing the short-range correlations between molecules. This finding allowed us to conclude that varying molecular spatial arrangement is responsible for the extraordinary dynamical behavior of ITZ, POS, and TER at high pressure.

Studies on the internal medium-range ordering and high pressure dynamics in modified ibuprofens

Broadband dielectric spectroscopy (BDS), combined with the X-ray diffraction (XRD) and Fourier transform infrared (FTIR) techniques, was used to study the dynamics of the primary (α) relaxation process and slow mode (SM), as well as structural properties and intermolecular interactions, in the methyl-, isopropyl-, hexyl-, and benzyl derivative of a well-known pharmaceutical, ibuprofen (IBU). Unexpectedly, the XRD and FTIR methods revealed the formation of medium-range ordering together with some molecular organization, which probably leads to the creation of small aggregates at the scale of several microns at lower temperatures. Moreover, high pressure dielectric experiments revealed that the SM (observed in the ambient pressure data) is not detected in the loss spectra of compressed IBU esters, which is consistent with the results reported previously for propylene carbonate and dioxolane derivatives. This finding can be interpreted as connected to either the comparable time scale of the structural dynamics and slow mode or suppression of the motions responsible for the latter process at elevated pressure. Additionally, it was found that the pressure coefficient of the glass transition temperature (dTg/dp) and activation volume (ΔV) change with molecular weight (Mw) in a non-monotonic way. It might be related to various chemical structures, conformations, and intermolecular interactions, as well as different architecture of supramolecular aggregates in the investigated compounds.

Studying structural and local dynamics in model H-bonded active ingredient - Curcumin in the supercooled and glassy states at various thermodynamic conditions

Different experimental techniques were applied to study thermal and structural properties, strength of H-bonds, possible keto-enol tautomerism and molecular dynamics at various thermodynamic conditions in the H-bonded active substance, curcumin (CRM). Dielectric measurements revealed dynamical features of examined compound that are uncharacteristic for the associated systems. This includes enormously large pressure coefficient of the glass transition temperature and prominent drop of the fragility with compression. Simultaneously, the shape of α-process slightly broadened at elevated pressures. Infrared investigations demonstrated that this effect is related to the variation in the population of H-bonds. Moreover, we studied the changes in the structural and dynamical properties of the glasses prepared upon cooling of the melt (ordinary glass, OG) and the one obtained after compression of CRM in the liquid phase and decompression at T = 293 K (dense glass, DG). Interestingly, during the aging of the latter sample, a clear shift of the β-relaxation towards higher frequencies was noted. This unexpected result indicated that the density of DG is probably getting smaller with time. Complementary X-ray diffraction experiments confirmed this supposition. Additionally, they showed that in DG there are traces of polymorph II of CRM that has a higher density than initial crystals (polymorph I). Finally, infrared studies demonstrated that H-bond pattern in DG is slightly different with respect to OG. Furthermore, Raman investigations suggested that probably keto-enol tautomerism might be shifted towards diketo form in the glass obtained at high compression. Our investigations are very interesting in the context of better understanding of the behavior of associated systems at high compression as well as provide a better insight into dynamics of higher density glasses produced at elevated pressures.

Influence of Polymeric Additive on the Physical Stability and Viscoelastic Properties of Aripiprazole

In this article, we investigated aripiprazole + Kollidon VA64 (ARP/KVA) and aripiprazole + Soluplus (ARP/SOP) amorphous solid dispersions. Thermal properties of all prepared systems have been examined by means of differential scanning calorimetry (DSC). Compositions revealing the recrystallization tendency were subsequently investigated by means of broadband dielectric spectroscopy (BDS). On the basis of dielectric data, the physically stable drug-polymer concentrations have been found. Finally, these systems have been investigated by rheology, which enables us to determine the minimal temperature required for dissolving the drug in the polymeric matrix, as well as the temperature dependence of the sample viscosity. Our investigations have shown that the amorphous form of the investigated antipsychotic drug might be effectively stabilized by both employed polymers. However, due to the better stabilization effect and the more favorable rheological properties, KVA proved to be a better polymeric excipient for extrusion of amorphous aripiprazole.

Crystallization of supercooled fenofibrate studied at ambient and elevated pressures

Investigation of the thermodynamic history in the T,p-plane of the crystallization process of a supercooled liquid.