Impact of Salt Co- and Counterions on Rheological Properties and Structure of Wormlike Micellar Solutions

Improvement of the Rheological Behavior of Viscoelastic Surfactant Fracturing Fluids by Metallic-Type Nanoparticles

The use of nanotechnology in the field of acidizing, particularly in fracturing fluids, has garnered significant attention over the past decade. Viscoelastic surfactants (VESs) are utilized as one of the most effective fracturing fluids, possessing both elasticity and viscosity properties. These fluids are crucial additives in acidizing packages, enhancing their performance. However, various factors, such as salinity, temperature, pressure, and concentration, can sometimes weaken the efficacy of these fluids. To address this, the integration of nanoparticles has been explored to improve fluid retention in reservoirs and enhance the efficiency. This study focuses on investigating the impact of the main metallic-type nanoparticles on the rheological behavior of VES fluids. Iron oxide, magnesium oxide, and zinc oxide nanoparticles were utilized, and the microscopic-scale rheological behavior of the fluids was thoroughly evaluated. The highest performance for enhancing fluid gelation, stability, and rheological characteristics of VES fluids was found for Fe2O3 nanoparticles at an optimum concentration of 500 ppm. At this concentration and shear rate of 100 s-1, the viscosity of the fluid reached 169.61 cP. For iron oxide nanoparticles at a concentration of 500 ppm, by increasing the temperature from 25 to 85 °C, the gelation state of the fluid increased from 7 h and 50 min to 17 h and 45 min. This improvement is attributed to their high surface area and the increased density of entanglement points within the micelles, leading to a more interconnected structure with enhanced viscoelastic properties. Furthermore, iron oxide nanoparticles significantly enhance gelation by physically connecting the micelles, thereby improving stability and structure. The absorption of surfactant molecules by the nanoparticles additionally contributes to micelle reconstruction and shape alteration. The presence of iron oxide nanoparticles helps maintain the gel structure even at elevated temperatures, preventing rapid viscosity decrease. Our findings may provide new insights for development of high-performance, economical, and environment-friendly fracturing fluids used in well stimulation operations.

Fabrication and Enzymatic Disorganization of Multiresponse Worm-Like Micelles

How to fabricate multiresponse worm-like micelles (WLMs) and the corresponding green disposal is still challenging. A strategy of fabricating the surfactant-based WLMs that can respond simultaneously to light, heat, and pH was developed by using triple-response sodium (E)-2-(4-(phenyldiazenyl)phenoxy) acetate (AzoNa) and butyrylcholinesterase (BChE)-hydrolyzable palmitoylcholine bromide (PCB). Under the optimal molar ratio of AzoNa to PCB (∼0.5), the PCB-AzoNa WLMs formed with a maximum zero-shear viscosity (η0) value of about 2.1 × 105 mPa·s and an average diameter (D) of 4.1 ± 0.6 nm under conditions of 37 °C and pH 7.4. After irradiated with 365 nm UV light for 80 min, AzoNa underwent the trans-to-cis transition, by which the PCB-AzoNa WLMs was destroyed; however, the PCB-AzoNa WLMs could be reformed upon the irradiation of 455 nm blue light for 18 h or heating at 70 °C for 45 min due to the cis-to-trans isomerization of AzoNa. When pH changed from 7.4 to 2.0, the PCB-AzoNa WLMs was destroyed rapidly because of the conversion of AzoNa to the acid form of AzoH, whereas the PCB-AzoNa WLMs could be reformed after pH was restored to 7.4. The multiple responsiveness of the PCB-AzoNa WLMs was reversible due to the reversible trans-cis isomerization or protonation of AzoNa. Besides, the average D values of light, heat, and pH-regenerated PCB-AzoNa WLMs were 4.2 ± 0.7, 4.0 ± 0.7, and 4.0 ± 0.6 nm, respectively. Finally, the PCB-AzoNa WLMs could be enzymatically disorganized under conditions of 37 °C and pH 7.4 due to the BChE-catalyzed hydrolysis of PCB. We hope that the fabrication and enzymatic disorganization strategies for PCB-based multiresponse WLMs presented here will find potential applications in the formulation of antimicrobial household and personal care products containing PCB and in the green disposal of viscous waste containing PCB.

Interacting collagen and tannic acid Particles: Uncovering pH-dependent rheological and thermodynamic behaviors

HYPOTHESIS

Biomaterials such as collagen and tannic acid (TA) particles are of interest in the development of advanced hybrid biobased systems due to their beneficial therapeutic functionalities and distinctive structural properties. The presence of numerous functional groups makes both TA and collagen pH responsive, enabling them to interact via non-covalent interactions and offer tunable macroscopic properties.

EXPERIMENT

The effect of pH on the interactions between collagen and TA particles is explored by adding TA particles at physiological pH to collagen at both acidic and neutral pH. Rheology, isothermal titration calorimetry (ITC), turbidimetric analysis and quartz crystal microbalance with dissipation monitoring (QCM-D) are used to study the effects.

FINDINGS

Rheology results show significant increase in elastic modulus with an increase in collagen concentration. However, TA particles at physiological pH provide stronger mechanical reinforcement to collagen at pH 4 than collagen at pH 7 due to the formation of a higher extent of electrostatic interaction and hydrogen bonding. ITC results confirm this hypothesis, with larger changes in enthalpy, |ΔH|, observed when collagen is at acidic pH and |ΔH| > |TΔS| indicating enthalpy-driven collagen-TA interactions. Turbidimetric analysis and QCM-D help to identify structural differences of the collagen-TA complexes and their formation at both pH conditions.

Supramolecular self-assembly of robust, ultra-stable, and high-temperature-resistant viscoelastic worm-like micelles

HYPOTHESIS

Worm-like micelles are susceptible to heating owing to the fast dynamic exchange of molecules between micelles. Inhibition of such exchange could afford robust worm-like micelles, which is expected to largely improve rheology properties at high temperatures.

EXPERIMENTS

A cationic surfactant docosyl(trimethyl)azanium chloride (DCTAC) and a strongly hydrophobic organic counterion 3-hydroxy naphthalene-2-carboxylate (SHNC) were used for the worm-like micelles fabrication. The microstructure was characterized using cryogenic transmission electron microscopy and small-angle neutron scattering, and the interactions between DCTAC and SHNC were characterized using nuclear magnetic resonance spectroscopy. Rheometer was employed to measure the rheological properties of the solution.

FINDINGS

SHNC/DCTAC at the molar ration of 1:2 forms ultra-stable worm-like micelles, whose viscosity remain stable at temperature up to 130 °C. SHNC is found to strongly adsorbs on DCTAC micelle with the orientation on the surface of micelle, keeping the naphthalene backbone entire penetration into the palisade layer while both carboxylic and hydroxyl groups protrude out of the micelle. With temperature increasing, this adsorption further strengthens, resulting in the growth contour length and accompanying the enhancement of rheological properties. One SHNC molecule and two DCTAC molecules are speculated to form a stable complex via multiple interactions including hydrophobic, cationic-π, and π-π interactions, which decreases the dynamic exchange of them between micelles. These findings are helpful to understand surfactant aggregates stability and assist the development of novel stable supramolecular nanostructures. Additionally, the excellent thermal stability of this worm-like micellar fluid makes it a potential high-temperature resistant clean fracturing fluid for deep oil reservoirs.

Ecofriendly Viscoelastic Solutions Formed from a Recyclable Rosin-Based Amine Oxide Surfactant

Innovations in molecular structures formed using bioresources are efficient means to prepare surfactant aggregates with unique properties. Here, a rosin-based amine oxide surfactant (R-11-3-AO) containing large hydrophobic groups was synthesized from rosin derivatives, namely, dehydroabietic acid and long-chain amino acids. Cryo-transmission electron microscopy showed that R-11-3-AO molecules formed extremely long wormlike micelles with a cross-sectional diameter of 4-5 nm at a concentration of approximately 7 mmol·L^-1. A gel-like system was obtained at approximately 30 mmol·L^-1 due to the dense entanglement of the wormlike micelles. The solutions also exhibited unique shear thickening behavior at a shear rate of approximately 10 s^-1 even at high concentrations. The large hydrophobic group contained in R-11-3-AO is the origin of the strong van der Waals interactions between the surfactant molecules, resulting in the rapid growth of wormlike micelles. This rosin-based surfactant is the first recoverable amine oxide surfactant from solutions through the salting-out effect with high recovery rates. This work demonstrates the unique capabilities of rosin-based surfactants for forming wormlike micelles and provides opportunities for the development of surfactant recovery technologies.

Universal Character of Breaking of Wormlike Surfactant Micelles by Additives of Different Hydrophobicity

Wormlike surfactant micelles are widely used in various applications including fracturing technology in oil industry, template synthesis of different nanoobjects, micellar copolymerization of hydrophilic and hydrophobic monomers, and so forth. Most of those applications suggest the solubilization of different additives in the micelles. The present paper is aimed at the comparative study of the effect of the solubilization of hydrophobic (n-decane and 1-phenylhexane) and hydrophilic (N-isopropylacrylamide and acrylamide) substances on the rheological properties and structure of the micelles using several complementary techniques including rheometry, small angle neutron scattering, dynamic light scattering, and diffusion ordered NMR spectroscopy. For these studies, mixed micelles of potassium oleate and n-octyltrimethylammonium bromide containing the excess of either anionic or cationic surfactants were used. It was shown that hydrophobic additives are completely solubilized inside the micelles being localized deep in the core (n-decane, 1-phenylhexane) or near the core/corona interface (1-phenylhexane). At the same time, only a small fraction of hydrophilic additives (14% of N-isopropylacrylamide and 4% of acrylamide) penetrate the micelles being localized at the corona area. Despite different localization of the additives inside the micelles, all of them induce the breaking of wormlike micelles with the formation of either ellipsoidal microemulsion droplets (in the case of hydrophobic additives) or ellipsoidal surfactant micelles (in the case of hydrophilic additives). The breaking of micelles results in the drop of viscosity of the solution up to water value. The main result of this paper consists in the observation of the fact that for all the additives under study, the dependences of the viscosity on the volume fraction of additive lie on the same master curve being shifted along the volume fraction axis by a certain factor depending on the hydrophobicity of the added species. Those data are quite useful for various applications of wormlike surfactant micelles suggesting the solubilization of different additives inside them.

Salt-Induced Transformations of Hybrid Micelles Formed by Anionic Surfactant and Poly(4-vinylpyridine)

Salt-induced structural transformation of charged hybrid surfactant/polymer micelles formed by potassium oleate and poly(4-vinylpyridine) was investigated by cryo-TEM, SANS with contrast variation, DLS, and 2D NOESY. Cryo-TEM data show, that at small salt concentration beads-on-string aggregates on polymer chains are formed. KCl induces the transformation of those aggregates into rods, which is due to the screening of the electrostatic repulsion between similarly charged beads by added salt. In a certain range of salt concentration, the beads-on-string aggregates coexist with the rodlike ones. In the presence of polymer, the sphere-to-rod transition occurs at higher salt concentration than in pure surfactant system indicating that hydrophobic polymer favors the spherical packing of potassium oleate molecules. The size of micelles was estimated by DLS. The rods that are formed in the hybrid system are much shorter than those in polymer-free surfactant solution suggesting the stabilization of the semi-spherical endcaps of the rods by embedded polymer. 2D NOESY data evidence that in the spherical aggregates the polymer penetrates deep into the core, whereas in tighter packed rodlike aggregates it is located mainly at core/corona interface. According to SANS with contrast variation, inside the rodlike aggregates the polymer adopts more compact coil conformation than in the beads-on-string aggregates. Such adaptive self-assembled polymer-surfactant nanoparticles with water-insoluble polymer are very promising for various applications including drag reduction at transportation of fluids.

Wormlike micelles of CTAB with phenols and with the corresponding phenolate derivatives - When hydrophobicity and charge drive the coacervation

HYPOTHESIS

Hydrophobicity and the presence or absence of charge in phenol derivatives are relevant on the rheology and phase behavior when they are assembled with a cationic surfactant, forming wormlike micelles. The incorporation of phenols with a greater number of rings into the micellar palisade is entropically favored, but a solubilization limit or coacervation are two paths followed by the solutions, depending on the electrical nature of the aromatic co-solutes.

EXPERIMENTS

The investigations were carried out with systems formed by a fixed concentration of hexadecyltrimethylammonium bromide (CTAB) and increasing concentrations of neutral phenols (1-naphthol, 2-naphthol, 2,3-dihydroxynaphthalene and R and S-binol) and with their corresponding phenolate derivatives. The monophasic limits of the systems were established, as well as their linear and non-linear rheology. The structural investigation of the coacervates formed with the phenolates were done using SAXS and Cryo-TEM.

FINDINGS

The zero-shear viscosity of the solutions reaches maxima values close to the solubility limit of the aromatics, which depends on the numbers of rings and hydroxyl groups (position and number). However, when the correspondent ionized phenols were investigated, beyond the maxima values for the zero-shear viscosity, liquid-liquid biphasic systems are formed, in which the upper phase contains a coacervate, associated with branched wormlike micelles. However, when the ratio between phenolate and CTAB is around 3:1 the coacervate evolves to a lamellar structure.

Strong Viscosity Increase in Aqueous Solutions of Cationic C22-Tailed Surfactant Wormlike Micelles

The viscoelastic properties and structure parameters have been investigated for aqueous solutions of wormlike micelles of cationic surfactant erucyl bis(hydroxyethyl) methylammonium chloride with long C22 tail in the presence inorganic salt KCl. The salt content has been varied to estimate linear to branched transition conditions due to screening of the electrostatic interaction in the networks. The local cylindrical structure and low electrostatic repulsion was obtained by SANS data. The drastic power law dependencies of rheological properties on surfactant concentrations were obtained at intermediate salt content. Two power law regions of viscosity dependence were detected in semi-dilute solutions related to “unbreakable” and “living” micellar chains. The fast contour length growth with surfactant concentration demonstrated that is in good agreement with theoretical predictions.

Networks of Micellar Chains with Nanoplates

Abstract

Nanocomposite networks of surfactant micellar chains and natural bentonite clay nanoplates are studied by rheometry, small-angle neutron scattering, and cryogenic transmission electron microscopy. It is shown that, in an aqueous medium in the presence of a small part of an anionic surfactant, sodium dodecyl sulfate, the molecules of a biodegradable zwitterionic surfactant, oleyl amidopropyl dimethyl carboxybetaine, form micron-length living micellar chains which entangle and form a network possessing well-defined viscoelastic properties. It is found that addition of negatively charged clay nanoplates leads to an increase in viscosity and relaxation time by an order of magnitude. This is explained by the incorporation of the nanoplates into the network as physical multifunctional crosslinks. The incorporation occurs via the attachment of semispherical end-caps of the micelles to the surface of the particles covered with a surfactant layer, as visualized by cryogenic transmission electron microscopy. As the amount of nanoplates is increased, the rheological properties reach plateau; this is associated with the attachment of all end parts of micelles to nanoplates. The developed nanocomposite soft networks based on safe and eco-friendly components are promising for various practical applications.

Disruption of Cationic/Anionic Viscoelastic Surfactant Micellar Networks by Hydrocarbon as a Basis of Enhanced Fracturing Fluids Clean-Up

Studies of the effects produced by the solubilization of hydrophobic substances by micellar aggregates in water medium are quite important for applications of viscoelastic surfactant solutions for enhanced oil recovery (EOR), especially in hydraulic fracturing technology. The present paper aims at the investigation of the structural transformations produced by the absorption of an aliphatic hydrocarbon (n-decane) by mixed wormlike micelles of cationic (n-octyltrimethylammonium bromide, C8TAB) and anionic (potassium oleate) surfactants enriched by C8TAB. As a result of contact with a small amount (0.5 wt%) of oil, a highly viscoelastic fluid is transformed to a water-like liquid. By small-angle neutron scattering (SANS) combined with cryo-TEM, it was shown that this is due to the transition of long wormlike micelles with elliptical cross-sections to ellipsoidal microemulsion droplets. The non-spherical shape was attributed to partial segregation of longer- and shorter-tail surfactant molecules inside the surfactant monolayer, providing an optimum curvature for both of them. As a result, the long-chain surfactant could preferably be located in the flatter part of the aggregates and the short-chain surfactant—at the ellipsoid edges with higher curvature. It is proven that the transition proceeds via a co-existence of microemulsion droplets and wormlike micelles, and upon the increase of hydrocarbon content, the size and volume fraction of ellipsoidal microemulsion droplets increase. The internal structure of the droplets was revealed by contrast variation SANS, and it was shown that, despite the excess of the cationic surfactant, the radius of surfactant shell is controlled by the anionic surfactant with longer tail. These findings open a way for optimizing the performance of viscoelastic surfactant fluids by regulating both the mechanical properties of the fluids and their clean-up from the fracture induced by contact with hydrocarbons.

Self-assembly and viscosity changes of binary surfactant solutions: A molecular dynamics study

HYPOTHESIS

Structure and self-assembly of surfactants in the solution shows a fundamental influence on its viscosity. Through molecular simulations using Martini force field, synergistic effects in aggregation as well as the viscosity changes of a binary ionic surfactant system can be modelled. Simulations: Coarse-grained molecular dynamics simulations are performed to model the SDS/CAPB binary surfactant solution, and both equilibrium and non-equilibrium methods are used to calculate the viscosity of the equilibrated micellar systems.

FINDINGS

Our simulation results indicate that the new version of the Martini force field can provide more reasonable self-assembly of surfactant, both single and binary system. Synergistic effects in micelle formation for SDS/CAPB have been successfully reproduced, that is, the formation of cylindrical micelles or even wormlike micelles at a lower concentration when compared with the pure system. Meanwhile, both equilibrium and non-equilibrium methods provide quantitatively comparable viscosity for each system. For pure micellar system, the viscosity linearly increases with the total concentration. Nevertheless, our simulation fails to capture the viscosity enhancement of the solution in corresponding with the formation of rodlike or wormlike micelles, and a full parameter optimization of force field is still necessary.

Magnetic-field-assisted synthesis of anisotropic iron oxide particles: Effect of pH

The synthesis of magnetite (Fe3O4) nanorods using reverse co-precipitation of Fe3+ and Fe2+ ions in the presence of a static magnetic field is reported in this work. The phase composition and crystal structure of the synthesized material were investigated using electron diffraction, Raman spectroscopy, and transmission electron microscopy. It was shown that the morphology of the reaction product strongly depends on the amount of OH- ions in the reaction mixture, varying from Fe3O4 nanorods to spherical Fe3O4 nanoparticles. Fe3O4 nanorods were examined using high-resolution transmission electron microscopy proving that they are single-crystalline and do not have any preferred crystallographic orientation along the axis of the rods. According to the data obtained a growth mechanism was proposed for the rods that consists of the dipole-dipole interaction between their building blocks (small hexagonal faceted magnetite nanocrystals), which are formed during the first step of the reaction. The study suggests a facile, green and controllable method for synthesizing anisotropic magnetic nanoparticles in the absence of stabilizers, which is important for further modification of their surfaces and/or incorporation of the nanoparticles into different media.

Effect of residual chemicals on wormlike micelles assembled from a C22-tailed cationic surfactant

HYPOTHESIS

Ultra-long-chain surfactants, particularly C₂₂-tailed ones, have attracted considerable attention because of their ease of self-assembly into wormlike micelles (WLMs). Commercial C₂₂-tailed surfactants often contain non-negligible amounts of chemical residues introduced during their production. Since the noncovalent driving force of wormlike self-assembly can be greatly affected by the composition, we hypothesized that the residual chemicals could play a significant role in tuning the micelle microstructure and macroscopic properties of the surfactants.

EXPERIMENTS

To confirm this hypothesis, a highly pure (>99%) C₂₂-tailed cationic surfactant, N-erucylamidopropyl-N,N,N-trimethylammonium iodide (EDAI) was synthesized, and various amounts of corresponding reactants (iodomethane or N-erucamidopropyl-N,N-dimethylamine) or solvents (acetone) commonly used in surfactant synthesis were introduced as residues. The impact of each individual residue on the macroscopic appearances, rheological properties, and micelle morphology of the surfactant solution were investigated.

FINDINGS

Increasing the residue fraction in the EDAI solution resulted in an initial increase, followed by a dramatic drop in solution viscosity. This behavior was described in terms of micellar structural transformations based on analysis of cryo-TEM observations and surface tension measurements. These findings are of crucial importance in understanding the sophisticated behaviors of WLMs and will benefit the industrial preparation of ultra-long-chain surfactants for commercial use.

Growth of wormlike micelles of surfactant induced by embedded polymer: role of polymer chain length

Incorporation of polymer chains into wormlike surfactant micelles, which find a large range of applications, offers the opportunity to modify their structure and properties. In this paper, using spectroscopic, scattering and rheological techniques and computer simulations, we study the incorporation of poly(4-vinylpyridine) of two different molecular weights (MWs) into entangled networks of wormlike surfactant micelles of potassium oleate. Using NMR-spectroscopy we show that, independent of its MW, the polymer incorporates into the core-corona interface of the surfactant micelles. According to SANS data, the polymer does not alter the micelle structure or the micelle radius, but diminishes the packing density of the surfactant. At the same time, rheology reveals a stark difference between the surfactant networks with embedded polymers of different MWs. Networks with the higher-MW polymer possess larger viscosity and a longer relaxation time, which we attribute to the larger length of the hybrid micelles. Moreover, we demonstrate that in an intermediate concentration range the higher-MW polymer is able to link neighbouring surfactant micelles together, which has never been previously observed. However, with a further increase in polymer content the micelles become smaller due to the high breaking susceptibility of the boundaries of polymer-containing sections, leading to the stabilization of micellar end-caps by the embedded macromolecules. This process is more prominent in the case of the shorter polymer. Our finding that an increased MW of macromolecules permits the formation of longer hybrid micelles and enhances their rheological properties is of obvious importance for the fundamental understanding of polymer-surfactant interactions and the development of new industrial formulations based on hybrid polymer-wormlike surfactant micelles.

Soft magnetic nanocomposites based on adaptive matrix of wormlike surfactant micelles

A network of wormlike surfactant micelles with embedded magnetic particles demonstrates high magnetoresponsive linear viscoelastic properties due to tunable matrix.

On the Use of Nonsteroidal Anti-Inflammatory Drugs as Rheology Modifiers for Surfactant Solutions

Surfactant molecules can give rise to different morphological structures, depending on numerous parameters such as temperature, surfactant concentration, and salinity. Specifically, the salt content can be easily tuned in a way to induce morphological transitions and modulate the rheological response. It is shown that nonsteroidal anti-inflammatory drugs can be used in the same way as classical binding salts in changing the rheological properties of the resulting gel-like system. On the one hand, the experimental results show that by tuning small details in the molecular conformation of the drug and its concentration in the micellar solution, it is possible to obtain the desired mechanical response. On the other hand, the results prove that rheology can be considered as a powerful tool to detect the drug release content, with obvious consequences on possible applications.