Effects of Hydrotropic Salt on the Nanoscopic Dynamics of DTAB Micelles

Effect of salt addition on a triblock copolymer-zwitterionic surfactant assembly: insight from excited-state proton transfer

Copolymer-surfactant assemblies are frequently utilized across various fields, from medicine to nanotechnology. Understanding the organization of the mixed assemblies in a saline environment will further expand their application horizons, especially under physiological conditions. Excited-state proton transfer (ESPT) can provide insight into the hydration nature and organization of the non-toxic assembly of a triblock copolymer F127 (poly-(ethylene oxide)101 (PEO101)-poly(propylene oxide)56 (PPO56)-PEO101)) and a zwitterionic sulfobetaine surfactant N-dodecyl-N,N-dimethyl-3-ammoniopropane sulfonate (SB12). Here, we present a comprehensive investigation of the compactness and hydration nature of the F127-SB12 mixed assemblies at different salt concentrations using the ESPT of 8-hydroxy pyrene-1,3,6-trisulfonate (HPTS). In the absence of salts, gradual SB12 addition to a premicellar (0.4 mM) or a post-micellar (4 mM) F127 solution leads to an anomalous modulation of the protonated and deprotonated emission bands. The emission intensity ratio (protonated/deprotonated) first increases to a maximum at a particular SB12 concentration (6 mM and 35 mM for the premicellar and post-micellar F127 assemblies, respectively), and then the ratio decreases with a further increase in the surfactant concentration. Since the intensity ratio is an indicator of the retardation of the ESPT process, the mixed micellar configuration displaying a maximum intensity ratio represents the most compact and least hydrated state. Salt addition to this configuration lowers the intensity ratio, signifying an enhanced ESPT process. Dynamic light scattering (DLS) results indicate that the size of the mixed assembly remains almost unaltered with the addition of salts. Thus, salinity enhances the ESPT process inside the F127-SB12 mixed assemblies without significantly altering the hydrodynamic radius.

The Effect of Electrolytes and Urea on the Ethyl Lauroyl Arginate and Cellulose Nanocrystals Foam Stability

Carboxylated cellulose nanocrystals (cCNC) are highly dispersible particles useful in many industries. In particular, they can be applied to form Pickering emulsions and foams for “green” applications in the cosmetics, pharmaceutical industry or food processing. We demonstrated that carboxylated cellulose nanocrystals enhance foamability and foam stability when mixed with cationic surfactant ethyl lauroyl arginate (LAE), having superior properties over sulfated cellulose nanocrystals (sCNC) concerning surfactant concentration range and foam volume. Mixtures of LAE and cCNC were characterized for their hydrodynamic diameter, zeta potential, surface tension and surface rheological properties. The influence of electrolytes, namely, sodium chloride, guanidine hydrochloride and sodium salicylate, and the addition of concentrated urea to LAE-cCNC mixtures on foamability and foam stability were investigated. Electrolytes in the concentration of 5 mM showed a moderate effect on foam stability. In contrast, spectacular foam collapse was detected after adding concentrated urea. The preliminary rheological data from the pendant drop oscillations revealed low elastic modulus upon urea addition and the loss modulus that increased with the frequency, which suggested a viscous interfacial layer.

Structural Insights into Self-Assembled Aerosol-OT Aggregates in Aqueous Media Using Atomistic Molecular Dynamics

In water, the surfactant dioctyl sulfosuccinate (Aerosol-OT or AOT) exhibits diverse aggregate structures, ranging from micelles to lamella. An atomic-level understanding, however, of the formation and structure of these aggregates is lacking. Herein, using atomistic molecular dynamics (MD) with microsecond-long simulations, self-assembly of AOT in water is studied for concentrations of 1, 7.2, and 20 wt % at 293 K and for 7.2 wt % at 353 K. Assembly proceeds through stepwise association and dissociation of single AOT molecules, and the fusion and fission of AOT clusters. At 293 K, AOT self-assembles into either (i) spherical micelles (1 wt %), (ii) biphasic systems consisting of rod-like and prolate spheroidal micelles (7.2 wt %), or (iii) bilayers (20 wt %). We hypothesize that the observed rod-like structure is a precursor to lamellar microdomains found experimentally in biphasic dispersions. Increasing temperature to 353 K at 7.2 wt % results in a system consisting of prolate micelles but no rod-like micelles. Simulated phase behavior agrees with previously published experimental observations. Individual aggregates formed during self-assembly are identified using graph theory. Structural metrics of these aggregates like the radius of gyration, shape anisotropy, and prolateness are presented. Trends in structural metrics quantitatively reflect how shapes and sizes of AOT aggregates vary with surfactant concentration and temperature. These simulations provide deeper insight into open questions in the scientific community and demonstrate a method to generate physics-based micelle structures that can be used to rationalize experimental observations.

Preparation of Antimicrobial Coatings from Cross-Linked Copolymers Containing Quaternary Dodecyl-Ammonium Compounds

One of the concerns today’s societies face is the development of resistant pathogenic microorganisms. The need to tackle this problem has driven the development of innovative antimicrobial materials capable of killing or inhibiting the growth of microorganisms. The present study investigates the dependence of the antimicrobial activity and solubility properties on the hydrophilicity/hydrophobicity ratio of antimicrobial coatings based on quaternary ammonium compounds. In this line, suitable hydrophilic and hydrophobic structural units were selected for synthesizing the antimicrobial copolymers poly(4-vinylbenzyl dimethyldodecylammonium chloride-co-acrylic acid), P(VBCDDA-co-AA20) and poly(dodecyltrimethylammonium 4-styrene sulfonate-co-glycidyl methacrylate), P(SSAmC₁₂-co-GMA20), bearing an alkyl chain of 12 carbons either through covalent bonding or through electrostatic interaction. The cross-linking reaction of the carboxylic group of acrylic acid (AA) with the epoxide group of glycidyl methacrylate (GMA) of these two series of reactive antimicrobial copolymers was explored in blends, obtained through solution casting after curing at various temperatures. The release of the final products in pure water and NaCl 1 M solutions (as analyzed by gravimetry and total organic carbon, TOC/total nitrogen, TN analyses), could be controlled by the coating composition. The cross-linked polymeric membranes of composition 60/40 w/w % ratios led to 97.8 and 99.7% mortality for Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), respectively, whereas the coating 20/80 w/w % resulted in 96.6 and 99.8% cell reduction. Despite the decrease in hydrophobicity (from a 16- to a 12-carbon alkyl chain), the new materials maintained the killing efficacy, while at the same time resulting in increased release to the aqueous solution.

Experimental demonstration of the novel "van-Hove integral method (vHI)" for measuring diffusive dynamics by elastic neutron scattering

Quasi-elastic neutron scattering (QENS)-based on the seminal work of Nobel Laureate Brockhouse-has been one of the major methods for studying pico-second to nano-second diffusive dynamics over the past 70 years. This is regarded as an "inelastic" method for dynamics. In contrast, we recently proposed a new neutron-scattering method for dynamics, which uses the elastic line of the scattering to access system dynamics directly in the time domain (Benedetto and Kearley in Sci Rep 9:11284, 2019). This new method has been denoted "vHI" that stands for "van Hove Integral". The reason is that, under certain conditions, the measured elastic intensity corresponds to the running-time integral of the intermediate scattering function, [Formula: see text], up to a time that is inversely proportional to the energy band-width incident on the sample. As a result, [Formula: see text] is accessed from the time derivative of the measured vHI profile. vHI has been supported by numerical and Monte-Carlo simulations, but has been difficult to validate experimentally due to the lack of a suitable instrument. Here we show that vHI works in practice, which we achieved by using a simple modification to the standard QENS backscattering spectrometer methodology. Basically, we varied the neutron-energy band-widths incident at the sample via a step-wise variation of the frequency of the monochromator Doppler-drive. This provides a measurement of the vHI profile at the detectors. The same instrument and sample were also used in standard QENS mode for comparison. The intermediate scattering functions, [Formula: see text], obtained by the two methods-vHI and QENS-are strikingly similar providing a direct experimental validation of the vHI method. Perhaps surprisingly, the counting statistics of the two methods are comparable even though the instrument used was expressly designed for QENS. This shows that the methodology modification adopted here can be used in practice to access vHI profiles at many of the backscattering spectrometers worldwide. We also show that partial integrations of the measured QENS spectrum cannot provide the vHI profile, which clarifies a common misconception. At the same time, we show a novel approach which does access [Formula: see text] from QENS spectra.

Dioctadecyldimethylammonium bromide, a surfactant model for the cell membrane: Importance of microscopic dynamics

Cationic lipid membranes have recently attracted huge attention both from a fundamental point of view and due to their practical applications in drug delivery and gene therapy. The dynamical behavior of the lipids in the membrane is a key parameter controlling various physiological processes and drug release kinetics. Here, we review the dynamical and thermotropic phase behavior of an archetypal cationic lipid membrane, dioctadecyldimethylammonium bromide (DODAB), as studied using neutron scattering and molecular dynamics simulation techniques. DODAB membranes exhibit interesting phase behavior, specifically showing coagel, gel, and fluid phases in addition to a large hysteresis when comparing heating and cooling cycles. The dynamics of the lipid membrane is strongly dependent on the physical state of the bilayer. Lateral diffusion of the lipids is faster, by an order of magnitude, in the fluid phase than in the ordered phase. It is not only the characteristic times but also the nature of the segmental motions that differ between the ordered and fluid phases. The effect of different membrane active molecules including drugs, stimulants, gemini surfactants, and unsaturated lipids, on the dynamical and thermotropic phase behavior of the DODAB membrane, is also discussed here. Various interesting features such as induced synchronous ordering between polar head groups and tails, sub diffusive behavior, etc., are observed. The results shed light on the interaction between these additives and the membrane, which is found to be a complex interplay between the physical state of the membrane, charge, concentration, molecular architecture of the additives, and their location within the membrane.

Replica exchange dissipative particle dynamics method on threadlike micellar aqueous solutions

The self-assembly of surfactant molecules can spontaneously result in a variety of micelle morphologies, such as spherical micelles, threadlike micelles, and vesicles, and it is therefore crucial to predict and control the self-assembly to achieve a helpful process in the fields of materials chemistry and engineering. A dissipative particle dynamics (DPD) method used in a coarse-grained molecular simulation is applied to simulate various self-assembling soft matter systems because it can handle greater length and time scales than a typical molecular dynamics simulation (MD). It should be noted that the thorough sampling of a system is not assured at low temperatures because of large complex systems with coarse-grained representations. In this article, we demonstrate that the replica exchange method (REM) is very effective for even a DPD in which the energy barrier is comparatively lower than that of a MD. A replica exchange on DPD (REDPD) simulation for threadlike micellar aqueous solutions was conducted, and the values of the potential energy and the mean aggregation number were compared. As a result, the correct values and a self-assembled structure within a low-temperature range can only be obtained through the REDPD.

Ubiquicidin-Derived Peptides Selectively Interact with the Anionic Phospholipid Membrane

Ubiquicidin (UBI)/ribosomal protein S30 (RS30) is an intracellular protein with antimicrobial activities against various pathogens. UBI (29-41) and UBI (31-38) are two crucial peptides derived from Ubiquicidin, which have shown potential as infection imaging probes. Here, we report the interactions of UBI-derived peptides with anionic and zwitterionic phospholipid membranes. Our isothermal titration calorimetry results show that both peptides selectively interact with the anionic phospholipid membrane (a model bacterial membrane) and reside mainly on the membrane surface. The interaction of UBI-derived peptides with the anionic phospholipid membrane is exothermic and driven by both enthalpy (ΔH) and entropy (ΔS), with the entropic term TΔS being greater than ΔH. This large entropic term can be a result of the aggregation of the anionic vesicles, which is confirmed by dynamic light scattering (DLS) measurements. DLS data show that vesicle aggregation is enhanced with increasing peptide-to-lipid molar ratios (P/L) and is found to be more pronounced in the case of UBI (29-41). DLS results are found to be consistent with independent transmission measurements. To study the effects of UBI-derived peptides on the microscopic dynamics of the model bacterial membrane, quasielastic neutron scattering (QENS) measurements have been carried out. The QENS results show that both peptides restrict the lateral motion of the lipid within the leaflet. UBI (29-41) acts as a stronger stiffening agent, hindering the lateral diffusion of lipids more efficiently than UBI (31-38). To our knowledge, this is the first report illustrating the mechanism of interaction of UBI-derived peptides with model membranes. This study also has implications for the improvement and design of antimicrobial peptide-based infection imaging probes.

Dynamic Landscape in Self-Assembled Surfactant Aggregates

A process in which a disordered system of pre-existing molecules generates an organized structure through specific, local interactions among the molecules themselves is termed molecular self-assembly. Micelles, microemulsions, and vesicles are examples of such self-assembled systems where amphiphilic molecules are involved. As the functional properties of these systems (such as wetting and emulsification, release of solubilized drugs, etc.) are dictated by the dynamic behavior of the surfactants at the molecular level, it is of immense interest to investigate these systems for the same. The dynamics in soft matter systems is quite complex, involving different time and length scales. We used a combination of neutron scattering and molecular dynamics simulation studies in probing the dynamic landscape in various self-assembled surfactant aggregates. Neutron scattering experiments were carried out using several spectrometers covering a wide dynamic range to probe motions on different time scales. The interaction between the surfactants can be varied by changing the molecular architecture, counterion concentration, temperature, and so forth. It is important to study the effect of these parameters on the dynamics of surfactants in these aggregates. We have carried out experiments on various ionic (anionic as well as cationic) micelles with varied counterion concentrations, vesicles, and lipid bilayers to unravel the complex dynamic features present in these systems. In this feature article, we will discuss some important results of our recent work on dynamics in these self-assembled surfactant aggregates.

Hydrotrope-Driven Self-Assembly in CTAB/ n-Hexanol/Water/Heptane Reverse Micellar System

Self-organization of nanoparticles into one-dimensional (1D) nanochains leads to new unpredicted physiochemical properties, which are further exploited to develop photonic or electronic devices. Thus, the controlled fabrication of 1D nanochains requires nanotemplate, which acts as building blocks for the self-assembly of nanoparticles. To address this issue, we designed a hydrotrope (sodium salicylate)-based CTAB/ n-hexanol/water/heptane reverse micellar system. Hydrotrope, herein, modulates electrostatic interactions between reverse micellar droplets and paves the way for the formation of self-assembled structures. Small-angle X-ray scattering studies were performed on the CTAB/heptane reverse micellar system by varying hydrotrope concentrations and water-to-surfactant ratios (W _x)_. The aqueous content of the reverse micellar pool is determined from the W _x value, where W _x = [H₂O]/[CTAB] and [CTAB] = 0.05 M. SAXS studies were performed for CTAB/heptane reverse micellar systems at three different W _x values, that is, 6, 12, and 16 and represented by W₆, W₁₂, and W₁₆, respectively. All SAXS profiles were modeled with a spherical form factor and a Baxter sticky hard sphere structure factor. The interaction between droplets was predicted in terms of stickiness parameter. The effect of W _x on the formation of self-assembled structures and forces governing the assembly has been discussed in detail. For the W₆ system, the electrostatic repulsion between reverse micellar droplets decreases, resulting in the formation of the 1D chain-like assembly of nanodroplets. In the case of the W₁₂ system, the dual feature of the hydrotrope has been observed, it increases the size of the reverse micellar system and reduces electrostatic repulsion between droplets because of which the formation of chain-like assemblies cannot be determined with accuracy. For the W₁₆ system, the decrease in micellar size with the increase in the hydrotrope concentration has been observed. Thus, our reverse micellar templates may provide a comprehensive method for the fabrication of high aspect ratio 1D nanochains of a variety of materials and harnessing their collective properties for magnetic, catalytic, and opto-electronic applications.

Deciphering interactions of ionic liquids with biomembrane

Ionic liquids (ILs) are a special class of low-temperature (typically < 100 °C) molten salts, which have huge upsurge interest in the field of chemical synthesis, catalysis, electrochemistry, pharmacology, and biotechnology, mainly due to their highly tunable nature and exceptional properties. However, practical uses of ILs are restricted mainly due to their adverse actions on organisms. Understanding interactions of ILs with biomembrane is prerequisite to assimilate the actions of these ionic compounds on the organism. Here, we review different biophysical methods to characterize interactions between ILs and phospholipid membrane, a model biomembrane. All these studies indicate that ILs interact profoundly with the lipid bilayer and modulate the structure, microscopic dynamics, and phase behavior of the membrane, which could be the fundamental cause of the observed toxicity of ILs. Effects of ILs on the membrane are found to be strongly dependent on the lipophilicity of the IL and are found to increase with the alkyl chain length of IL. This can be correlated with the observed higher toxicity of IL with the longer alkyl chain length. These informations would be useful to tune the toxicity of IL which is required in designing environment-friendly nontoxic solvents of the so-called green chemistry for various practical applications.

Dynamical Transitions and Diffusion Mechanism in DODAB Bilayer

Dioctadecyldimethylammonium bromide (DODAB), a potential candidate for applications in drug transport or DNA transfection, forms bilayer in aqueous media exhibiting a rich phase behavior. Here, we report the detailed dynamical features of DODAB bilayer in their different phases (coagel, gel and fluid) as studied by neutron scattering techniques. Elastic intensity scans show dynamical transitions at 327 K in the heating and at 311 K and 299 K during cooling cycle. These results are consistent with calorimetric studies, identified as coagel-fluid phase transition during heating, and fluid-gel and gel-coagel phase transitions during cooling. Quasielastic Neutron Scattering (QENS) data analysis showed presence of only localized internal motion in the coagel phase. However, in the gel and fluid phases, two distinct motions appear, namely lateral motion of the DODAB monomers and a faster localized internal motion of the monomers. The lateral motion of the DODAB molecule is described by a continuous diffusion model and is found to be about an order of magnitude slower in the gel phase than in the fluid phase. To gain molecular insights, molecular dynamics simulations of DODAB bilayer have also been carried out and the results are found to be in agreement with the experiment.

Effects of ionic liquids on the nanoscopic dynamics and phase behaviour of a phosphatidylcholine membrane

Ionic liquids (ILs) are potential candidates for new antimicrobials due to their tunable antibacterial and antifungal properties that are required to keep pace with the growing challenge of bacterial resistance. To a great extent their antimicrobial actions are related to the interactions of ILs with cell membranes. Here, we report the effects of ILs on the nanoscopic dynamics and phase behaviour of a dimyristoylphosphatidylcholine (DMPC) membrane, a model cell membrane, as studied using neutron scattering techniques. Two prototypical imidazolium-based ILs 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM[BF4]) and 1-decyl-3-methylimidazolium tetrafluoroborate (DMIM[BF4]), which differ only in terms of the alkyl chain length of cations, have been used for the present study. Fixed Elastic Window Scan (FEWS) shows that the incorporation of ILs affects the phase behaviour of the phospholipid membrane significantly and the transition from a solid gel to a fluid phase shifts to lower temperature. This is found to be consistent with our differential scanning calorimetry measurements. DMIM[BF4], which has a longer alkyl chain cation, affects the phase behaviour more strongly in comparison to BMIM[BF4]. The pressure-area isotherms of the DMPC monolayer measured at the air-water interface show that in the presence of ILs, isotherms shift towards higher area-per lipid molecule. DMIM[BF4] is found to shift the isotherm to a greater extent compared to BMIM[BF4]. Quasielastic neutron scattering (QENS) data show that both ILs act as a plasticizer, which enhances the fluidity of the membrane. DMIM[BF4] is found to be a stronger plasticizing agent in comparison to BMIM[BF4] that has a cation with a shorter alkyl chain. The incorporation of DMIM[BF4] enhances not only the long range lateral motion but also the localised internal motion of the lipids. On the other hand, BMIM[BF4] acts weakly in comparison to DMIM[BF4] and mainly alters the localised internal motion of the lipids. Any subtle change in the dynamical properties of the membrane can profoundly affect the stability of the cell. Hence, the dominant effect of the IL with the longer chain length on the dynamics of the phospholipid membrane might be correlated with its cytotoxic activity. QENS data analysis has provided a quantitative description of the effects of the two imidazolium-based ILs on the dynamical and phase behaviour of the model cell membrane, which is essential for a detailed understanding of their action mechanism.

Nanoscopic dynamics of bicontinous microemulsions: effect of membrane associated protein

Bicontinous microemulsions (BμE) generally consist of nanodomains formed by surfactant in a mixture of water and oil at nearly equal proportions and are potential candidates for the solubilization and purification of membrane proteins. Here we present the first time report of nanoscopic dynamics of surfactant monolayers within BμEs formed by the anionic surfactant sodium dodecyl sulfate (SDS) measured on the nanosecond to picosecond time scale using quasielastic neutron scattering (QENS). BμEs investigated herein consisted of middle phases isolated from Winsor-III microemulsion systems that were formed by mixing aqueous and oil solutions under optimal conditions. QENS data indicates that surfactants undergo two distinct motions, namely (i) lateral motion along the surface of the oil nanodomains and (ii) localized internal motion. Lateral motion can be described using a continuous diffusion model, from which the lateral diffusion coefficient is obtained. Internal motion of surfactant is described using a model which assumes that a fraction of the surfactants' hydrogens undergoes localized translational diffusion that could be considered confined within a spherical volume. The effect of cytochrome c, an archetypal membrane-associated protein known to strongly partition near the surfactant head groups in BμEs (a trend supported by small-angle X-ray scattering [SAXS] analysis), on the dynamics of BμE has also been investigated. QENS results demonstrated that cytochrome c significantly hindered both the lateral and the internal motions of surfactant. The lateral motion was more strongly affected: a reduction of the lateral diffusion coefficient by 33% was measured. This change is mainly attributable to the strong association of cytochrome c with oppositely charged SDS. In contrast, analysis of SAXS data suggested that thermal fluctuations (for a longer length and slower time scale compared to QENS) were increased upon incorporation of cytochrome c. This study demonstrates the utility of QENS for evaluating dynamics of BμEs in nanoscopic region, and that proteins directly affect the microscopic dynamics, which is of relevance for evaluating release kinetics of encapsulated drugs from BμE delivery systems and the use of BμEs as biomembrane mimetic systems for investigating membrane protein-biomembrane interactions.