Effect of Nonionic Surfactants on Dispersion and Polar Interactions in the Adsorption of Cellulases onto Lignin

Enhancement of the Catalytic Performance and Operational Stability of Sol-Gel-Entrapped Cellulase by Tailoring the Matrix Structure and Properties

Commercial cellulase Cellic CTec2 was immobilized by the entrapment technique in sol–gel matrices, and sol–gel entrapment with deposition onto magnetic nanoparticles, using binary or ternary systems of silane precursors with alkyl- or aryl-trimethoxysilanes, at different molar ratios. Appropriate tailoring of the sol–gel matrix allowed for the enhancement of the catalytic efficiency of the cellulase biocatalyst, which was then evaluated in the hydrolysis reaction of Avicel microcrystalline cellulose. A correlation between the catalytic activity with the properties of the sol–gel matrix of the nanobiocatalysts was observed using several characterization methods: scanning electron microscopy (SEM), fluorescence microscopy (FM), Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA/DTA). The homogeneous distribution of the enzymes in the sol–gel matrix and the mass loss profile as a function of temperature were highlighted. The influence of temperature and pH of the reaction medium on the catalytic performance of the nanobiocatalysts as well as the operational stability under optimized reaction conditions were also investigated; the immobilized biocatalysts proved their superiority in comparison to the native cellulase. The magnetic cellulase biocatalyst with the highest efficiency was reused in seven successive batch hydrolysis cycles of microcrystalline cellulose with remanent activity values that were over 40%, thus we obtained promising results for scaling-up the process.

Revealing the mechanism of surfactant-promoted enzymatic hydrolysis of dilute acid pretreated bamboo

To improve the enzymatic digestibility of dilute acid pretreated bamboo residue (DABR), surfactants including PEG 4000 and Tween 80 were added to prevent the non-productive adsorption between residual lignin and enzyme. At the optimal loadings (e.g., 0.2 and 0.3 g surfactant/g lignin), the enzymatic digestibility of DABR improved from 29.4% to 64.6% and 61.6% for PEG 4000 and Tween 80, respectively. Furthermore, the promoting mechanism of these surfactants on enzymatic hydrolysis was investigated by real-time surface plasmon resonance (SPR) and fluorescence spectroscopy. Results from SPR analysis showed that Tween 80 outperformed PEG 4000 in terms of dissociating the irreversible cellulase adsorption onto lignin. Fluorescence quenching mechanism revealed that PEG 4000 and Tween 80 intervened the interaction between lignin and cellulase by hydrogen bonds/Van der Waals and hydrophobic action, respectively. This work provided an in-depth understanding of the mechanisms of PEG 4000 and Tween 80 on enhancing the enzymatic hydrolysis efficiency.

Roles of Surfactants in Oriented Immobilization of Cellulase on Nanocarriers and Multiphase Hydrolysis System

Surfactants, especially non-ionic surfactants, play an important role in the preparation of nanocarriers and can also promote the enzymatic hydrolysis of lignocellulose. A broad overview of the current status of surfactants on the immobilization of cellulase is provided in this review. In addition, the restricting factors in cellulase immobilization in the complex multiphase hydrolysis system are discussed, including the carrier structure characteristics, solid-solid contact obstacles, external diffusion resistance, limited recycling frequency, and nonproductive combination of enzyme active centers. Furthermore, promising prospects of cellulase-oriented immobilization are proposed, including the hydrophilic-hydrophobic interaction of surfactants and cellulase in the oil-water reaction system, the reversed micelle system of surfactants, and the possible oriented immobilization mechanism.

Combination strategy of laccase pretreatment and rhamnolipid addition enhance ethanol production in simultaneous saccharification and fermentation of corn stover

The effects of laccase pretreatment and surfactant addition in the simultaneous saccharification and fermentation (SSF) of corn stover by engineered Saccharomyces cerevisiae were studied. Surfactants Tween-80, tea saponin and rhamnolipid improved ethanol production in SSF, among which the biosurfactant rhamnolipid reached the highest ethanol yield. At the 6 d in SSF, the ethanol content of addition rhamnolipid of laccase pretreatment corn stover (Lac-CS) and Lac-CS reached 0.73 g/L and 0.56 g/L, which was 2.32 folds and 1.54 folds higher than the control of 0.22 g/L, respectively. These findings suggested that the combination of laccase pretreatment and rhamnolipid addition further improve ethanol production. GC-MS, composition of corn stover, protein concentration of supernatant and glucose content studies were executed to explore the mechanism of combination strategy of laccase pretreatment and rhamnolipid addition enhance ethanol production. This study provides guidance for the application of laccase and surfactant in bioethanol production.

Efficiency enhancement of a new cellulase cocktail at low enzyme loading for high solid digestion of alkali catalyzed atmospheric glycerol organosolvent pre-treated sugarcane bagasse

The acquisition during biomass saccharification of elevated levels of fermentable sugars with lower cellulase concentration is central to ensuring an economically viable and industrially relevant hydrolytic process. Thus, using a new cellulase preparation (LT4) at low cellulase loading (2 mg protein/g dried substrate), this study assessed the possible boosting effect of integrating accessory enzymes and additives on high-solids hydrolysis of sugarcane bagasse via fed-batch feeding. Hydrolysis which commenced with initial 8% solids loading and subsequent substrate feeding of 4% solids at 6 h, 18 h, and 24 h respectively, proved optimal for the 20% high-solids saccharification producing 158 g/L total sugars and 83% glucose yield after 72 h with the combined optimized additives and accessory enzymes. The results obtained indicate that the integration of accessory enzymes and additives offers a benignant approach to minimizing the enzyme load and cost of high solids saccharification of lignocellulosic heteropolymers while also boosting enzyme hydrolytic performance.

Nanomechanics of Lignin-Cellulase Interactions in Aqueous Solutions

Efficient enzymatic hydrolysis of cellulose in lignocellulose to glucose is one of the most critical steps for the production of biofuels. The nonproductive adsorption of lignin to expensive cellulase highly impedes the development of biorefinery. Understanding the lignin-cellulase interaction mechanism serves as a vital basis for reducing such nonproductive adsorption in their practical applications. Yet, limited report is available on the direct characterization of the lignin-cellulase interactions. Herein, for the first time, the nanomechanics of the biomacromolecules including lignin, cellulase, and cellulose were systematically investigated by using a surface force apparatus (SFA) at the nanoscale in aqueous solutions. Interestingly, a cation-π interaction was discovered and demonstrated between lignin and cellulase molecules through SFA measurements with the addition of different cations (Na⁺, K⁺, etc.). The complementary adsorption tests and theoretical calculations further confirmed the validity of the force measurement results. This finding further inspired the investigation of the interaction between lignin and other noncatalytic-hydrolysis protein (i.e., soy protein). Soy protein was demonstrated as an effective, biocompatible, and inexpensive lignin-blocker based on the molecular force measurements through the combined effects of electrostatic, cation-π, and hydrophobic interactions, which significantly improved the enzymatic hydrolysis efficiencies of cellulose in pretreated lignocellulosic substrates. Our results offer quantitative information on the fundamental understanding of the lignin-cellulase interaction mechanism. Such unraveled nanomechanics provides new insights into the development of advanced biotechnologies for addressing the nonproductive adsorption of lignin to cellulase, with great implications on improving the economics of lignocellulosic biorefinery.

Enhancing Lignin Dissolution and Extraction: The Effect of Surfactants

The dissolution and extraction of lignin from biomass represents a great challenge due to the complex structure of this natural phenolic biopolymer. In this work, several surfactants (i.e., non-ionic, anionic, and cationic) were used as additives to enhance the dissolution efficiency of model lignin (kraft) and to boost lignin extraction from pine sawdust residues. To the best of our knowledge, cationic surfactants have never been systematically used for lignin dissolution. It was found that ca. 20 wt.% of kraft lignin is completely solubilized using 1 mol L-1 octyltrimethylammonium bromide aqueous solution. A remarkable dissolution efficiency was also obtained using 0.5 mol L-1 polysorbate 20. Furthermore, all surfactants used increased the lignin extraction with formic acid, even at low concentrations, such as 0.01 and 0.1 mol L-1. Higher concentrations of cationic surfactants improve the extraction yield but the purity of extracted lignin decreases.

Effects of Biosurfactants on Enzymatic Saccharification and Fermentation of Pretreated Softwood

The enzymatic hydrolysis of cellulose is inhibited by non-productive adsorption of cellulases to lignin, and that is particularly problematic with lignin-rich materials such as softwood. Although conventional surfactants alleviate non-productive adsorption, using biosurfactants in softwood hydrolysis has not been reported. In this study, the effects of four biosurfactants, namely horse-chestnut escin, Pseudomonas aeruginosa rhamnolipid, and saponins from red and white quinoa varieties, on the enzymatic saccharification of steam-pretreated spruce were investigated. The used biosurfactants improved hydrolysis, and the best-performing one was escin, which led to cellulose conversions above 90%, decreased by around two-thirds lignin inhibition of Avicel hydrolysis, and improved hydrolysis of pretreated spruce by 24%. Red quinoa saponins (RQS) addition resulted in cellulose conversions above 80%, which was around 16% higher than without biosurfactants, and it was more effective than adding rhamnolipid or white quinoa saponins. Cellulose conversion improved with the increase in RQS addition up to 6 g/100 g biomass, but no significant changes were observed above that dosage. Although saponins are known to inhibit yeast growth, no inhibition of Saccharomyces cerevisiae fermentation of hydrolysates produced with RQS addition was detected. This study shows the potential of biosurfactants for enhancing the enzymatic hydrolysis of steam-pretreated softwood.

Effect of a Nonionic Surfactant on Enzymatic Hydrolysis of Lignocellulose Based on Lignocellulosic Features and Enzyme Adsorption

Reduction in the adsorption of cellulase onto lignin has been thought to be the common reason for the improvement of enzymatic hydrolysis of lignocellulose (EHLC) by a nonionic surfactant (NIS). Few research studies have focused on the relationship between lignocellulosic features and NIS for improving EHLC. This study investigated the impact of Tween20 on the enzymatic hydrolysis and enzyme adsorption of acid-treated and alkali-treated sugarcane bagasse (SCB), cypress, and Pterocarpus soyauxii (PS) with and without being ground. After addition of Tween20, the adsorption of cellulase onto unground and ground alkali-treated SCB increased, and the unground acid-treated SCB exhibited little change in adsorption cellulase, while other unground and ground, treated samples showed decreased cellulase adsorption. Tween20 could improve the enzymatic hydrolysis of acid-treated SCB, while it had little influence on the enzymatic hydrolysis of other treated materials. After being ground, both cellulase adsorption and enzymatic hydrolysis of treated lignocelluloses increased, and Tween20 could enhance the enzymatic hydrolysis of acid-treated materials while hardly affected the enzymatic hydrolysis of alkali-treated materials. This indicated that the promotion effect of Tween20 on enzymatic hydrolysis of treated lignocellulose could not be mainly ascribed to the hindrance of Tween20 to cellulase adsorption on lignin but was related to the lignocellulosic features such as hemicellulose removal and surface morphology changes.

Real-Time QCM-D Monitoring of the Adsorption-Desorption of Expansin on Lignin

Expansin has nonhydrolytic disruptive activity and synergistically acts with cellulases to enhance the hydrolysis of cellulose. The adsorption-desorption of expansin on noncellulosic lignin can greatly affect the action of expansin on lignocellulose. In this study, three lignins with different sources (kraft lignin (KL), sodium lignin sulfonate (SLS), and enzymatic hydrolysis lignin (EHL)) were selected as the substrates. The real-time adsorption-desorption of Bacillus subtilis expansin (BsEXLX1) on lignins was monitored using quartz crystal microgravimetry with dissipation (QCM-D). The effects of temperature and Tween 80 on the adsorption-desorption behaviors were also investigated. The results show that BsEXLX1 exhibited high binding ability on lignin and achieved maximum adsorption of 283.2, 273.8, and 266.9 ng cm^-2 at 25 °C on KL, SLS, and EHL, respectively. The maximum adsorption decreased to 148.2-192.8 ng cm^-2 when the temperature increased from 25 to 45 °C. Moreover, Tween 80 competitively bound to lignin and significantly prevented expansin adsorption. After irreversible adsorption of Tween 80, the maximum adsorption of BsEXLX1 greatly decreased to 33.3, 37.2, and 10.3 ng cm^-2 at 25 °C on KL, SLS, and EHL, respectively. Finally, a kinetic model was developed to analyze the adsorption-desorption process of BsEXLX1. BsEXLX1 has a higher adsorption rate constant (k_A) and a lower desorption rate constant (k_D) on KL than on SLS and EHL. The findings of this study provide useful insights into the adsorption-desorption of expansin on lignin.

Synergistic effect of lignin incorporation into polystyrene for producing sustainable superadsorbent

Lignin has gained intensive interest as an excellent raw material for the generation of advanced green products. Polystyrene (PS) is known for its worldwide application in water purification processes. To induce a sustainable PS, kraft lignin (KL) and polystyrene were polymerized via free radical polymerization in a facile aqueous emulsion process. KL enhanced surface area and porosity of PS. The physicochemical properties of induced KL–PS were analyzed, and the fate of lignin in KL–PS was discussed fundamentally. Wettability and surface energy analyses were implemented to monitor the surface properties of KL, PS and KL–PS. Incorporation of KL in PS (40 wt%) boosted its surface energy and oxygen content, which led to KL–PS with better compatibility than PS with copper ions in aqueous systems. A quartz crystal microbalance with dissipation (QCM-D) confirmed the noticeably higher adsorption performance of copper ion on KL–PS than on PS and KL. The sorption mechanism, which was revealed by FTIR studies, was primarily attributed to the coordination of Cu(ii) and hydroxyl group of KL–PS as well as the quadrupolar system of KL–PS.

Lignin has gained intensive interest as an excellent raw material for the generation of advanced green products.

Evaluation of the action of Tween 20 non-ionic surfactant during enzymatic hydrolysis of lignocellulose: Pretreatment, hydrolysis conditions and lignin structure

The aim of this work was to study the effects of pretreatment process, hydrolysis condition and structural features of lignin on the improving action of surfactants (Tween 20) for enzymatic hydrolysis of pretreated wheat straw, and further to interpret the relation of these factors with the non-productive adsorption of cellulases on lignin. Tween 20 seemed to be more greatly improve cellulose conversion under harsher conditions. The surfactant showed more significant improvement for acid-pretreated substrates than oxidative-pretreated substrates. Highly-condensed lignin and phenolic hydroxyl groups showed much stronger adsorption ability to cellulases, while Tween 20 could well block the lignin-cellulase interactions recovering cellulose hydrolyzability. It was proposed that pretreatments altered lignin structures, resulting in the change of surface properties thus further impacting the lignin-cellulase interactions. Addition of Tween 20 could modify lignin surface properties to change its hydrophobicity, hydrogen bonding ability and surface charges, thus reducing the non-productive adsorption of proteins.

Real-time adsorption and action of expansin on cellulose

BACKGROUND

Biological pretreatment is an environmentally safe method for disrupting recalcitrant structures of lignocellulose and thereby improving their hydrolysis efficiency. Expansin and expansin-like proteins act synergistically with cellulases during hydrolysis. A systematic analysis of the adsorption behavior and mechanism of action of expansin family proteins can provide a basis for the development of highly efficient pretreatment methods for cellulosic substrates using expansins.

RESULTS

Adsorption of Bacillus subtilis expansin (BsEXLX1) onto cellulose film under different conditions was monitored in real time using a quartz crystal microbalance with dissipation. A model was established to describe the adsorption of BsEXLX1 onto the film. High temperatures increased the initial adsorption rate while reducing the maximum amount of BsEXLX1 adsorbed onto the cellulose. Non-ionic surfactants (polyethylene glycol 4000 and Tween 80) at low concentrations enhanced BsEXLX1 adsorption; whereas, high concentrations had the opposite effect. However, sodium dodecyl sulfate inhibited adsorption at both low and high concentrations. We also investigated the structural changes of cellulose upon BsEXLX1 adsorption and found that BsEXLX1 adsorption decreased the crystallinity index, disrupted hydrogen bonding, and increased the surface area of cellulose, indicating greater accessibility of the substrate to the protein.

CONCLUSIONS

These results increase our understanding of the interaction between expansin and cellulose, and provide evidence for expansin treatment as a promising strategy to enhance enzymatic hydrolysis of lignocellulose.