Time- and Temperature-Dependent Growth Behavior of Ionic Liquids on Au(111) Studied by Atomic Force Microscopy in Ultrahigh Vacuum

AI-Equipped Scanning Probe Microscopy for Autonomous Site-Specific Atomic-Level Characterization at Room Temperature

An advanced scanning probe microscopy system enhanced with artificial intelligence (AI-SPM) designed for self-driving atomic-scale measurements is presented. This system expertly identifies and manipulates atomic positions with high precision, autonomously performing tasks such as spectroscopic data acquisition and atomic adjustment. An outstanding feature of AI-SPM is its ability to detect and adapt to surface defects, targeting or avoiding them as necessary. It is also designed to overcome typical challenges such as positional drift and tip apex atomic variations due to the thermal effects, ensuring accurate, site-specific surface analysis. The tests under the demanding conditions of room temperature have demonstrated the robustness of the system, successfully navigating thermal drift and tip fluctuations. During these tests on the Si(111)-(7 × 7) surface, AI-SPM autonomously identified defect-free regions and performed a large number of current-voltage spectroscopy measurements at different adatom sites, while autonomously compensating for thermal drift and monitoring probe health. These experiments produce extensive data sets that are critical for reliable materials characterization and demonstrate the potential of AI-SPM to significantly improve data acquisition. The integration of AI into SPM technologies represents a step toward more effective, precise and reliable atomic-level surface analysis, revolutionizing materials characterization methods.

Ultrathin Films of a Nitrile-Functionalized Ionic Liquid [C3CNC1Im][Tf2N] on Au(111) and Pt(111): Adsorption, Growth, and Thermal Behavior

We studied the adsorption and thermal behavior of the nitrile-functionalized ionic liquid (IL) [C3CNC1Im][Tf2N] on Au(111) and Pt(111) between 150 and 600 K. Ultrathin films were prepared at 150 K by physical vapor deposition (PVD) and were characterized by angle resolved X-ray photoelectron spectroscopy (ARXPS). At 150 K, the IL adsorbs intact with a similar orientation on both surfaces: In the first layer, the so-called wetting layer, the cation lies flat on the surface and the anion is bound in cis-configuration with the SO2 groups toward the surface and the CF3 groups away from the surface. On Au(111), subsequent deposition of IL in the multilayer regime at 150 K shows 2D growth up until ∼0.75 ML and a transition to moderate 3D at higher coverages. Temperature-programmed XPS indicates a change in surface morphology toward more pronounced 3D islands for the multilayers on top of the wetting layer between 220 and 290 K. From 350 to 440 K, desorption of multilayers occurs, with IL decomposition starting at 375-400 K. On the more reactive Pt(111) surface, decomposition starts already above 280 K. Notably, this temperature is ∼80 K higher than the onset for decomposition of related nonfunctionalized imidazolium-based ILs, that is, [C2C1Im][OTf], [C1C1Im][Tf2N], and [C8C1Im][Tf2N] on Pt(111). This difference is attributed to the nitrile functionality. Our findings demonstrate that functionalizing ILs significantly modifies their thermal properties, which is of high relevance for SCILL (solid catalyst with an ionic liquid layer) systems.

Adsorption and Thermal Evolution of the Carbonyl-functionalized Ionic Liquid [5-oxo-C6C1Im][NTf2] on Pt(111): A Combined IRAS, STM, and DFT Study

The coating of heterogeneous catalysts with ionic liquids enables precise tuning of catalytic activity and selectivity. Recently, the fundamentals of solid catalysts with ionic liquid layers have been extensively studied. So far, investigations have focused on simple ILs without specialized functional groups. In our current work, we aim to involve functionalized ILs to take advantage of the interactions between these functional groups, the catalyst, and the reactants. In this study, we investigated the interaction, and thermal stability of the carbonyl-functionalized IL [5-oxo-C6C1Im][NTf2] on Pt(111) by infrared reflection absorption spectroscopy and scanning tunneling microscopy. In addition, we performed density functional theory calculations to support our interpretation. At 200 K and low coverage, the carbonyl group of the [5-oxo-C6C1Im]+ cation is oriented parallel to the Pt(111) surface. With increasing coverage, the alkyl chain detaches from the surface and orients towards the vacuum. The [NTf2]- anion adsorbs parallel to the surface via the oxygen atoms of the SO2 groups. At higher coverage, at least one of the SO2 groups completely detaches from the surface. Upon heating to 250 K, we observe decomposition and partial desorption of [5-oxo-C6C1Im][NTf2], with further decomposition and desorption occurring between 350 and 400 K.

Surface Chemistry of a [C2C1Im][OTf] (Sub)Wetting Layer on Pt(111): A Combined XPS, IRAS, and STM Study

The concept of a solid catalyst with an ionic liquid layer (SCILL) is a promising approach to improve the selectivity of noble metal catalysts in heterogeneous reactions. In order to understand the origins of this selectivity control, we investigated the growth and thermal stability of ultrathin 1-ethyl-3-methylimidazolium trifluormethanesulfonate [C2C1Im][OTf] films on Pt(111) by infrared reflection absorption spectroscopy (IRAS) and X-ray photoelectron spectroscopy (XPS) in time-resolved and temperature-programmed experiments. We combined these spectroscopy experiments with scanning tunneling microscopy (STM) to obtain detailed insights into the orientation and adsorption geometry of the ions in the first IL layer. Furthermore, we propose a mechanism for the thermal evolution of [C2C1Im][OTf] on Pt(111). We observe an intact IL layer on the surface at temperatures below 200 K. Adsorbed [C2C1Im][OTf] forms islands, which are evenly distributed over the surface. The [OTf]- anion adsorbs via the SO3 group, with the molecular axis perpendicular to the surface. Anions and cations are arranged next to each other, alternating on the Pt(111) surface. Upon heating to 250 K, we observe changes in geometry and structural distribution. Whereas at low temperature, the ions are arranged alternately for electrostatic reasons, this driving force is no longer decisive at 250 K. Here, a phase separation of two different species is discernible in STM. We propose that this effect is due to a surface reaction, which changes the charge of the adsorbates. We assume that the IL starts to decompose at around 250 K, and thus, pristine IL and decomposition products coexist on the surface. Also, IRAS and XPS show indication of IL decomposition. Further heating leads to increased IL decomposition. The reaction products associated with the anions are volatile and leave the surface. In contrast, the cation fragments remain on the surface up to temperatures above 420 K.

Carbon-Induced Changes in the Morphology and Wetting Behavior of Ionic Liquids on the Mesoscale

Thin films of ionic liquids (ILs) have gained significant attention due to their unique properties and broad applications. Extensive research has focused on studying the influence of ILs' chemical composition and substrate characteristics on the structure and morphology of IL films at the nano- and mesoscopic scales. This study explores the impact of carbon-coated surfaces on the morphology and wetting behavior of a series of alkylimidazolium-based ILs. Specifically, this work investigates the effect of carbon coating on the morphology and wetting behavior of short-chain ([C2C1im][NTf2] and [C2C1im][OTf]) and long-chain ([C8C1im][NTf2] and [C8C1im][OTf]) ILs deposited on indium tin oxide (ITO), silver (Ag), and gold (Au) substrates. A reproducible vapor deposition methodology was utilized for the deposition process. High-resolution scanning electron microscopy, atomic force microscopy, and X-ray photoelectron spectroscopy were used to analyze the morphological and structural characteristics of the substrates and obtained IL films. The experimental data revealed that the IL films deposited on carbon-coated Au substrates showed minor changes in their morphology compared to that of the films deposited on clean Au surfaces. However, the presence of carbon coatings on the ITO and Ag surfaces led to significant morphological alterations in the IL films. Specifically, for short-chain ILs, the carbon film surface induced 2D growth of the IL film, followed by subsequent island growth. In contrast, for long-chain ILs deposited on carbon surfaces, layer-by-layer growth occurred without island formation, resulting in highly uniform and coalesced IL films. The extent of morphological changes observed in the IL films was found to be influenced by two crucial factors: the thickness of the carbon film on the substrate surface and the amount of IL deposition.

Adsorption and thermal evolution of [C1C1Im][Tf2N] on Pt(111)

In the context of ionic liquid (IL)-assisted catalysis, we have investigated the adsorption and thermal evolution of the IL 1,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide ([C1C1Im][Tf2N]) on Pt(111) between 100 and 800 K by angle-resolved X-ray photoelectron spectroscopy and scanning tunneling microscopy. Defined amounts of IL in the coverage range of a complete first wetting layer were deposited at low temperature (100-200 K), and subsequently heated to 300 K, or directly at 300 K. At 100 K, the IL adsorbs as an intact disordered layer. Upon heating to 200 K, the IL stays intact, but forms an ordered and well-oriented structure. Upon heating to 250 K, the surface order increases, but at the same time STM and XPS indicate the onset of decomposition. Upon heating to 300 K, decomposition progresses, such that 50-60% of the IL is decomposed. The anion-related reaction products desorb instantaneously, and the cation-related products remain on the surface. Thereby, the surface is partly passivated, enabling the remaining IL to still be adsorbed intact at 300 K. For IL deposition directly at 300 K, a fraction of the IL instantaneously decomposes, with the anion-related products desorbing, opening free space for further deposition of IL. Hence, cation-related species accumulate at the expense of anions, until one fully closed wetting layer is formed. As a consequence, a higher dose is required to reach this coverage at 300 K, compared to 100-200 K.

The impact of the cation alkyl chain length on the wettability of alkylimidazolium-based ionic liquids at the nanoscale

Ionic liquids (ILs) have been widely used for energy storage and conversion devices due to their negligible vapor pressure, high thermal stability, and outstanding interfacial properties. Notably, the interfacial nanostructure and the wettability of thin ionic liquid films on solid surfaces are of utmost relevance in nanosurface science and technology. Herein, a reproducible physical vapor deposition methodology was used to fabricate thin films of four alkylimidazolium bis(trifluoromethylsulfonyl)imide ILs. The effect of the cation alkyl chain length on the wettability of ILs was explored on different surfaces: gold (Au); silver (Ag); indium-tin oxide (ITO). High-resolution scanning electron microscopy (SEM) and atomic force microscopy (AFM) were used to evaluate the morphology of the produced micro- and nanodroplets and films. SEM and AFM results revealed an island growth for all the ILs deposited on ITO and Ag surfaces, with a lower minimum free area to promote nucleation (MFAN) in Ag and higher wettability for ILs having larger non-polar domains. The low wettability of ITO by the studied ILs was highlighted. For long-chain ILs, nucleation and growth mechanisms were strongly conditioned by coalescence processes. The results also supported the higher affinity of the ILs to the Au surface. The increase in the length of the cation alkyl chain was found to promote a better film adhesion inducing a 2D growth and higher wetting ability.

Effect of Solid Substrates on the Molecular Structure of Ionic Liquid Nanofilms

Fundamental understandings of the interfacial molecular structure of solid-confined ionic liquids (ILs) have significant impacts on the development of many cutting-edge applications. Among the extensive studies on the molecular structure at the IL/solid interface, direct observation of a double-layering quantized growth of [C_nmim][FAP] on mica was recently reported. In the current work, the atomic force microscopy (AFM) results directly show that the growths of [Bmim][FAP] nanofilms on silica and amorphous carbon are different from the double-layering growth on mica. The growth of [Bmim][FAP] nanofilms on silica is dominated by the aggregation of the IL molecules, which can be attributed to the inadequate negative charging of the silica surface resulting in a weak electrostatic interaction between silica and the IL cation. [Bmim][FAP] on amorphous carbon shows a fairly smooth film for the thinner nanofilms, which can be attributed to the π-π⁺ parallel stacking between the cation imidazolium ring and the randomly distributed sp² carbon on the amorphous carbon surface. Our findings highlight the effect of different IL/solid interactions, among the several competing interactions at the interface, on the resulting molecular arrangements of various IL.