Excited State Dynamics of Thermally Activated Delayed Fluorescence from an Excited State Intramolecular Proton Transfer System

Effect of concentration and wavelength of excitation on the photophysics of salicylate anion in acetonitrile and water

Sodium salicylate (NaSA) molecule exists as salicylate anion in acetonitrile (ACN) and water solvents, and exhibits large Stokes shifted fluorescence due to excited state intramolecular proton transfer (ESIPT), with decay times of ∼5 ns in ACN and ∼3.9 ns in water by 300 nm (absorption maxima) excitation. Previous studies report both ground and excited state enol-keto tautomerization in ACN, but only excited state tautomerization in water at 10-4 M. However, the current work explores the effect of concentration and excitation wavelengths on the photoinduced dynamics of ESIPT in the salicylate anion. On increasing the concentration of NaSA, no change in absorption spectra appears in both the solvents, and emission spectra of NaSA in water remain unaffected by changes in concentration or excitation wavelength, whereas, a slight red shift and decrease in FWHM appears in ACN. Time-domain fluorescence measurements show predominantly single-exponential decay throughout the emission profile by 300 nm excitation above the 10-5 M concentration in both the solvents, while by 375 nm excitation, multi-exponential fluorescence decay is observed at low concentrations, and as the concentration of NaSA increases, this decay behaviour tends to converge towards a single exponential decay. These results suggest that solute-solvent interactions stabilize the ground-state intermolecular hydrogen-bonded species at low concentrations, while higher concentrations weaken these interactions, leading to emission solely from the salicylate anion. Peak fit analysis of excitation spectra confirms enol-keto tautomerization in both the solvents, with the keto form being more stabilized in ACN. These findings underscore that in ACN, behaviour of NaSA is influenced by both concentration and excitation wavelength and contrary to previous reports, the keto form of the molecule is also present in water, though at a very low concentration and an increase in non-radiative transitions in water cause fluorescence quenching.

Design, Synthesis, and Photophysical Characterization of Biocompatible Thermally Activated Delayed Fluorescent Carbazole-Coumarins for Sensing Applications

A series of fluorescent carbazole-coumarins exhibiting good photoluminescence quantum yields and thermally activated delayed fluorescence (TADF) properties have been designed and synthetized using computer-aided density functional theory calculations. The TADF characteristics of the carbazole-coumarins were systematically explored both in solution and in the solid state, utilizing poly(methyl methacrylate) (PMMA) as a matrix. The study revealed that the introduction of carbazole units onto the coumarin benzene ring led to compounds with thermally induced reverse intersystem crossing and delayed fluorescence. The study further demonstrated the potential utility of these compounds in practical applications by incorporating them into a Cmr-PMMA-based sensor for molecular oxygen detection. The resulting sensor exhibited promising performance, highlighting the adaptability and efficacy of the synthesized TADF-carbazole-coumarin compounds for reversible molecular oxygen sensing.

Reproducible and High-Performance WOLEDs Based on Independent High-Efficiency Triplet Harvesting of Yellow Hot-Exciton ESIPT and Blue TADF Emitters

Hot exciton organic light-emitting diode (OLED) emitters can balance the high performance of a device and reduce efficiency roll-off by fast reverse intersystem crossing from high-lying triplets (hRISC). In this study, an excited-state intramolecular proton transfer (ESIPT) fluorophore of 2-(benzo[d]thiazol-2-yl)-4-(pyren-1-yl)phenol (PyHBT) with the typical characteristic properties of a hot exciton is developed. With high efficiency of utilization of the exciton (91%), its yellow OLED exhibited high external quantum efficiency (EQE) of 5.6%, current efficiency (CE) of 16.8 cd A-1 , and power efficiency (PE) of 17.3 lm W-1 . The performance of the yellow emissive "hot exciton" ESIPT fluorophores is among the highest recorded. Due to the large Stokes shift of the ESIPT emitter, non-energy-transferred high-performance white OLEDs (WOLEDs) are developed, which are reproducible and highly efficient. This is possible because of the independent harvesting of most of the triplets in both complementary-color emitters without the interference of energy transfer. The PyHBT-based WOLEDs exhibit a maximum EQE of 14.3% and CE of 41.1 cd A-1 , which facilitates the high-yield mass production of inexpensive WOLEDs.

Resolving the Photophysics of Nitrogen-Embedded Multiple Resonance Emitters: Origin of Color Purity and Emitting Efficiency

The emerging nitrogen-embedded multiple resonance (MR) emitters with an indolo[3,2,1-jk] carbazole (ICz) unit have exhibited promising performance for high-resolution organic light-emitting diode (OLED) devices, while the underlying photophysics has been rarely reported. In this work, the optical spectra, color purity, and emitting efficiency of ICz-based MR emitters were investigated by using electronic structure and thermal vibration correlation function (TVCF) calculations. Unlike B-N MR emitters, the high color purity of investigated ICz-based MR emitters was mainly contributed by considerable structural rigidity, which also greatly affects the radiative decay rate and fluorescence quantum yield of the S1 state. For the majority of investigated emitters, potential reverse intersystem crossing (RISC) channels (T1 → S1 and T2 → S1) are limited by thermally inaccessible ΔEST* or insufficient spin-orbital coupling (SOC), which can be distinguished by the calculated temperature-dependent RISC rate pattern. We provided a systematic photophysical picture for ICz-based MR emitters that might be interesting for the OLED design and application community.

Complexes on the Base of a Proton Transfer Capable Pyrimidine Derivative: How Protonation and Deprotonation Switch Emission Mechanisms

A rare example of pyrimidine-based ESIPT-capable compounds, 2-(2-hydroxyphenyl)-4-(1H-pyrazol-1-yl)-6-methylpyrimidine (HLH), was synthesized (ESIPT─excited state intramolecular proton transfer). Its reactions with zinc(II) salts under basic or acidic conditions afforded a dinuclear [Zn2LH2Cl2] complex and an ionic (H2LH)4[ZnCl4]2·3H2O solid. Another ionic solid, (H2LH)Br, was obtained from the solution of HLH acidified with HBr. In both ionic solids, the H+ ion protonates the same pyrimidinic N atom that accepts the O-H···N intramolecular hydrogen bond in the structure of free HLH, which breaks this hydrogen bond and switches off ESIPT in these compounds. This series of compounds which includes neutral HLH molecules and ionic (LH)- and (H2LH)+ species allowed us to elucidate the impact of protonation and coordination coupled deprotonation of HLH on the photoluminescence response and on altering the emission mechanism. The neutral HLH compound exhibits yellow emission as a result of the coexistence of two radiative decay channels: (i) T1 → S0 phosphorescence of the enol form and (ii) anti-Kasha S2 → S0 fluorescence of the keto form, which if feasible due to the large S2-S1 energy gap. However, owing to the efficient nonradiative decay through an energetically favorable conical intersection, the photoluminescence quantum yield of HLH is low. Protonation or deprotonation of the HLH ligand results in the significant blue-shift of the emission bands by more than 100 nm and boosts the quantum efficiency up to ca. 20% in the case of [Zn2LH2Cl2] and (H2LH)4[ZnCl4]2·3H2O. Despite both (H2LH)4[ZnCl4]2·3H2O and (H2LH)Br have the same (H2LH)+ cation in the structures, their emission properties differ significantly, whereas (H2LH)Br shows dual emission associated with two radiative decay channels: (i) S1 → S0 fluorescence and (ii) T1 → S0 phosphorescence, (H2LH)4[ZnCl4]2·3H2O exhibits only fluorescence. This difference in the emission properties can be associated with the external heavy atom effect in (H2LH)Br, which leads to faster intersystem crossing in this compound. Finally, a huge increase in the intensity of the phosphorescence of (H2LH)Br on cooling leads to pronounced luminescence thermochromism (violet emission at 300 K, sky-blue emission at 77 K).

Organic molecules with inverted singlet-triplet gaps

According to Hund's multiplicity rule, the energy of the lowest excited triplet state (T1) is always lower than that of the lowest excited singlet state (S1) in organic molecules, resulting in a positive singlet-triplet energy gap (ΔE ST). Therefore, the up-converted reverse intersystem crossing (RISC) from T1 to S1 is an endothermic process, which may lead to the quenching of long-lived triplet excitons in electroluminescence, and subsequently the reduction of device efficiency. Interestingly, organic molecules with inverted singlet-triplet (INVEST) gaps in violation of Hund's multiplicity rule have recently come into the limelight. The unique feature has attracted extensive attention in the fields of organic optoelectronics and photocatalysis over the past few years. For an INVEST molecule possessing a higher T1 with respect to S1, namely a negative ΔE ST, the down-converted RISC from T1 to S1 does not require thermal activation, which is possibly conducive to solving the problems of fast efficiency roll-off and short lifetime of organic light-emitting devices. By virtue of this property, INVEST molecules are recently regarded as a new generation of organic light-emitting materials. In this review, we briefly summarized the significant progress of INVEST molecules in both theoretical calculations and experimental studies, and put forward suggestions and expectations for future research.

Functionalized C3-Symmetric Building Blocks—The Chemistry of Triaminotrimesic Acid

A series of C₃-symmetric fully substituted benzenes were prepared based on alkyl triamino-benzene-tricarboxylates. Starting with a one step-synthesis, the alkyl triamino-benzene-tricarboxylates were synthesized using the corresponding cyanoacetates. The reactivity of these electronically sophisticated compounds was investigated by the formation of azides, the click reaction of the azides and a Sandmeyer-like reaction. Caused by the low stability of triaminobenzenes, direct N-alkylation was rarely reported. The use of the stable alkyl triamino-benzene-tricarboxylates allowed us total N-alkylation under standard alkylation conditions. The molecular structures of the C₃-symmetric structures have been corroborated by an X-ray analysis.

Dearomatization of Benzenoid Arenes Triggered by Triplet Excited State Intramolecular Proton Transfer

The detailed mechanism of photoinduced dearomatization of benzenoid arenes is investigated using both the high-level ab initio method and density functional theory. The results suggest that the optically allowed singlet excited state (S₂) can quickly decay to the lowest triplet excited state (T₁) through a barrierless internal conversion and intersystem crossing. Importantly, we find a triplet excited state intramolecular proton transfer (T-ESIPT) pathway to produce a diradical triplet intermediate (³M_O-H), which can trigger the subsequent [4 + 2] dearomatization reaction. Furthermore, the diastereoselectivity of the reaction was illustrated by the rotation of the O_-H group of ³M_O-H, which could be effectively modulated by the solvent effect (arising from the strength of the intermolecular hydrogen bond) and the substituted effect (arising from the strength of the electron-donation group). This photochemical mechanism can explain well the experimental observations, and the novel T-ESIPT process can open a new door in studying the photoinduced proton transfer reactions.

Thermally Activated Fluorescence vs Long Persistent Luminescence in ESIPT-Attributed Coordination Polymer

Excited-state intramolecular proton transfer (ESIPT) molecules demonstrating specific enol-keto tautomerism and the related photoluminescence (PL) switch have wide applications in displaying, sensing, imaging, lasing, etc. However, an ESIPT-attributed coordination polymer showing alternative PL between thermally activated fluorescence (TAF) and long persistent luminescence (LPL) has never been explored. Herein, we report the assembly of a dynamic Cd(II) coordination polymer (LIFM-101) from the ESIPT-type ligand, HPI2C (5-(2-(2-hydroxyphenyl)-4,5-diphenyl-1H-imidazol-1-yl)isophthalic acid). For the first time, TAF and/or color-tuned LPL can be achieved by controlling the temperature under the guidance of ESIPT excited states. Noteworthily, the twisted structure of the HPI2C ligand in LIFM-101 achieves an effective mixture of the higher-energy excited states, leading to ISC (intersystem crossing)/RISC (reverse intersystem crossing) energy transfer between the high-lying keto-triplet state (T_n(K*)) and the first singlet state (S₁(K*)). Meanwhile, experimental and theoretical results manifest the occurrence probability and relevance among RISC, ISC, and internal conversion (IC) in this unique ESIPT-attributed coordination polymer, leading to the unprecedented TAF/LPL switching mechanism, and paving the way for the future design and application of advanced optical materials.

Ultrathin non-doped thermally activated delayed fluorescence emitting layer for highly efficient OLEDs

We report highly efficient, ultrathin non-doped green and bluish-green organic light-emitting diodes (OLEDs) using a thermally activated delayed fluorescence (TADF) emitter. The green OLED with an ultrathin (∼1 nm) EML showed a 2.6-fold higher external quantum efficiency (EQE_max) of 13.5% with a luminance of 17 250 cd m^-2 than the conventional (30 nm) non-doped device.

Aggregation-induced emission spectra of triphenylamine salicylaldehyde derivatives via excited-state intramolecular proton transfer revealed by molecular spectral and dynamics simulations

Aggregation-induced emission (AIE) spectra accompanied by excited state intramolecular proton transfer (ESIPT) for two triphenylamine salicylaldehyde derivatives (namely, TS and TS-OMe) are investigated by performing molecular spectral and dynamics simulations associated with the hybrid quantum mechanics/molecular mechanics (QM/MM) at the quantum level of the time-dependent density functional theory. The simulated emission spectral peaks and Stokes' shifts are in good agreement with the experimental results for both TS and TS-OMe. Furthermore, the AIE spectral mechanisms are well explained to be associated with the ESIPT processes for both TS and TS-OMe monomers in the aggregated crystal state, while the AIE spectra mechanism for the TS-OMe (TS) dimer is accompanied by intermolecular charge-transfer excitation process. Besides, the TS dimers also contributed to the AIE mechanisms in the crystal with the intermolecular charge-transfer from one monomer to another. In addition, the TS dimers are contributed to the AIE mechanisms in the crystal with the intermolecular charge-transfer from one monomer to another. On the other hand, simulated emission spectra for both the TS and TS-OMe monomers in acetonitrile solution are involved in mixed emission with and without the ESIPT process, as interpreted by nonadiabatic molecular dynamics simulation. It is also briefly addressed that the emission spectra in the solution are weak and enhanced in the crystal. The present study provides a great physical insight into the design of highly efficient AIE compounds.

Excited-State Intramolecular Proton Transfer: A Short Introductory Review

In this short review, we attempt to unfold various aspects of excited-state intramolecular proton transfer (ESIPT) from the studies that are available up to date. Since Weller’s discovery of ESIPT in salicylic acid (SA) and its derivative methyl salicylate (MS), numerous studies have emerged on the topic and it has become an attractive field of research because of its manifold applications. Here, we discuss some critical aspects of ESIPT and tautomerization from the mechanistic viewpoint. We address excitation wavelength dependence, anti-Kasha ESIPT, fast and slow ESIPT, reversibility and irreversibility of ESIPT, hydrogen bonding and geometrical factors, excited-state double proton transfer (ESDPT), concerted and stepwise ESDPT.

Hot Vibrational States in a High-Performance Multiple Resonance Emitter and the Effect of Excimer Quenching on Organic Light-Emitting Diodes

The photophysics of multiple resonance thermally activated delayed fluorescence molecule ν-DABNA is described. We show coupling of a 285 cm^-1 stretching/scissoring vibrational mode of peripheral phenyl rings to the S₁ state, which dictates the ultimate emission full-width at half maximum. However, a separate high amplitude mode, 945 cm^-1 of the N-biphenyl units, mediates the reverse intersystem crossing (rISC) mechanism. Concentration-dependent studies in solution and solid state reveal a second emission band that increases nonlinearly with concentration, independent of the environment assigned to excimer emission. Even at concentrations well below those used in devices, the excimer contribution affects performance. Using different solvents and solid hosts, rISC rates between 3-6 × 10⁵ s^-1 are calculated, which show negligible dependence on environmental polarity or host packing. At 20 K over the first 10 ns, we observe a broad Gaussian excimer emission band with energy on-set above the S₁ exciton band. An optical singlet-triplet gap (ΔE_ST) of 70 meV is measured, agreeing with previous thermal estimates; however, the triplet energy is also found to be temperature-dependent. A monotonic increase of the exciton emission band full-width at half maximum with temperature indicates the role of hot transitions in forming vibrational excited states at room temperature (RT), and combined with an observed temperature dependency of ΔE_ST, we deduce that the rISC mechanism is that of thermally activated reverse internal conversion of T₁ to T_N (n ≥ 2) followed by rapid rISC of T_N to S₁. Organic light-emitting diodes with ν-DABNA as a hyperfluorescent emitter (0.5 wt % and 1 wt %) exhibit an increase of maximum external quantum efficiency, reaching 27.5% for the lower ν-DABNA concentration. On the contrary, a Förster radius analysis indicated that the energy transfer ratio is smaller because of higher donor-acceptor separation (>2.4 nm) with weak sensitizer emission observed in the electroluminescence. This indicates excimer quenching in 1 wt % devices.

Dual emission in purely organic materials for optoelectronic applications

Purely organic molecules, which emit light by dual emissive (DE) pathways, have received increased attention in the last decade. These materials are now being utilized in practical optoelectronic, sensing and biomedical applications. In order to further extend the application of the DE emitters, it is crucial to gain a fundamental understanding of the links between the molecular structure and the underlying photophysical processes. This review categorizes the types of DE according to the spin multiplicity and time range of the emission, with emphasis on recent experimental advances. The design rules towards novel DE molecular candidates, the most perspective types of DE and possible future applications are outlined. These exciting developments highlight the opportunities for new materials synthesis and pave the way for accelerated future innovation and developments in this area.

Isotope Effect in the Magneto-Optoelectronic Response of Organic Light-Emitting Diodes Based on Donor-Acceptor Exciplexes

The isotope effect is studied in the magneto-electroluminescence (MEL) and pulsed electrically detected magnetic resonance of organic light-emitting diodes based on thermally activated delayed fluorescence (TADF) from donor-acceptor exciplexes that are either protonated (H) or deuterated (D). It is found that at ambient temperature, the exchange of H to D has no effect on the spin-dependent current and MEL responses in the devices. However, at cryogenic temperatures, where the reverse intersystem crossing (RISC) from triplet to singlet exciplex diminishes, a pronounced isotope effect is observed. These results show that the RISC process is not governed by the hyperfine interaction as thought previously, but proceeds through spin-mixing in the triplet exciplex. The observations are corroborated by electrically detected transient spin nutation experiments that show relatively long dephasing time at ambient temperature, and interpreted in the context of a model that involves exchange and hyperfine interactions in the spin triplet exciplex. These findings deepen the understanding of the RISC process in TADF materials.

Excited-State Dynamics and Thermally Activated Delayed Fluorescence in the Classic Electron Acceptor Tetracyanoquinodimethane

Tetracyanoquinodimethane (TCNQ) is identified as one of the most important and classic constituents for the synthesis of organic conductors and shows an acute response of the fluorescence quantum yield to subtle changes in the polarity of solvents. Here, we report on characterization of the excited-state dynamics of TCNQ using time-resolved fluorescence and femtosecond transient absorption (TA) measurements in various solvents. Fluorescence decay and TA dynamics reveal that the fluorescence emissive and nonemissive states reach equilibrium within the fluorescence lifetime in carbon tetrachloride. Thermally activated delayed fluorescence of TCNQ is also revealed. The fluorescence in the polar solvents is quenched by the forward relaxation to the nonemissive state within a few picoseconds and the subsequent rapid de-excitation of the nonemissive state within a few tens of picoseconds. The nonemissive state is probably assigned to the triplet state, and the change in the forward and reverse intersystem crossing rates can be responsible for the response of the fluorescence to the polarity of solvents.