Sustainable Internal Electric Field for Enhanced Photocatalysis: From Material Design to Energy Utilization

Heterointerfaces: Unlocking Superior Capacity and Rapid Mass Transfer Dynamics in Energy Storage Electrodes

Heterogeneous electrode materials possess abundant heterointerfaces with a localized "space charge effect", which enhances capacity output and accelerates mass/charge transfer dynamics in energy storage devices (ESDs). These promising features open new possibilities for demanding applications such as electric vehicles, grid energy storage, and portable electronics. However, the fundamental principles and working mechanisms that govern heterointerfaces are not yet fully understood, impeding the rational design of electrode materials. In this study, the heterointerface evolution during charging and discharging process as well as the intricate interaction between heterointerfaces and charge/mass transport phenomena, is systematically discussed. Guidelines along with feasible strategies for engineering structural heterointerfaces to address specific challenges encountered in various application scenarios, are also provided. This review offers innovative solutions for the development of heterogeneous electrode materials, enabling more efficient energy storage beyond conventional electrochemistry. Furthermore, it provides fresh insights into the advancement of clean energy conversion and storage technologies. This review contributes to the knowledge and understanding of heterointerfaces, paving the way for the design and optimization of next-generation energy storage materials for a sustainable future.

Catalyzing Artificial Photosynthesis with TiO2 Heterostructures and Hybrids: Emerging Trends in a Classical yet Contemporary Photocatalyst

Titanium dioxide (TiO2) stands out as a versatile transition-metal oxide with applications ranging from energy conversion/storage and environmental remediation to sensors and optoelectronics. While extensively researched for these emerging applications, TiO2 has also achieved commercial success in various fields including paints, inks, pharmaceuticals, food additives, and advanced medicine. Thanks to the tunability of their structural, morphological, optical, and electronic characteristics, TiO2 nanomaterials are among the most researched engineering materials. Besides these inherent advantages, the low cost, low toxicity, and biocompatibility of TiO2 nanomaterials position them as a sustainable choice of functional materials for energy conversion. Although TiO2 is a classical photocatalyst well-known for its structural stability and high surface activity, TiO2-based photocatalysis is still an active area of research particularly in the context of catalyzing artificial photosynthesis. This review provides a comprehensive overview of the latest developments and emerging trends in TiO2 heterostructures and hybrids for artificial photosynthesis. It begins by discussing the common synthesis methods for TiO2 nanomaterials, including hydrothermal synthesis and sol-gel synthesis. It then delves into TiO2 nanomaterials and their photocatalytic mechanisms, highlighting the key advancements that have been made in recent years. The strategies to enhance the photocatalytic efficiency of TiO2, including surface modification, doping modulation, heterojunction construction, and synergy of composite materials, with a specific emphasis on their applications in artificial photosynthesis, are discussed. TiO2-based heterostructures and hybrids present exciting opportunities for catalyzing solar fuel production, organic degradation, and CO2 reduction via artificial photosynthesis. This review offers an overview of the latest trends and advancements, while also highlighting the ongoing challenges and prospects for future developments in this classical yet rapidly evolving field.

Fabrication of multiphase MoSe2 modified BiOCl nanosheets for efficient piezo-photoelectric hydrogen evolution and antibiotic degradation

Efficient spatial charge separation plays a crucial role in improving the photocatalytic performance. Therefore, 1T/2H MoSe2/BiOCl (1T/2H MS/BOC) and 2H MoSe2/BiOCl (2H MS/BOC) piezo-photocatalysts are synthesized. By combining piezoelectric catalysis and photocatalysis, a highly active piezo-photocatalytic process is realized. The optimal 1T/2H MS/BOC piezo-photocatalyst displays superior diclofenac (DCF) degradation and hydrogen (H2) evolution activity under the combined action of ultrasound and light. In particular, the DCF degradation kinetic constant (k) of optimal 0.5% 1T/2H MS/BOC under the synergistic effect of ultrasound and light is 0.057 min-1, which is 8.1 and 6.3 times higher than those of BiOCl (0.007 min-1) and 0.5% 2H MS/BOC (0.009 min-1). Moreover, the H2 evolution rate of 0.5% 1T/2H MS/BOC is 122.5 μmol g-1 h-1, which is also higher than those of BiOCl (45.8 μmol g-1 h-1) and 2H MS/BOC (49.5 μmol g-1 h-1). The dramatic improvement in the DCF degradation and H2 evolution piezo-photocatalytic performance of 1T/2H MS/BOC catalysts is ascribed to the built-in polarization electric field and abundance of active sites of 1T/2H MS/BOC as well as the advantageous band structure between BiOCl and 1T/2H MoSe2. Additionally, three probable degradation pathways of DCF were put forward from the results of liquid chromatography-mass spectrometry (LCMS) and density functional theory (DFT) calculations. This study provides the design strategy of high efficiency piezo-photocatalysts in environmental purification and energy-generation fields based on phase and band structure engineering.

Recent Advances in Efficient Photocatalysis via Modulation of Electric and Magnetic Fields and Reactive Phase Control

The past several years has witnessed significant progress in enhancing photocatalytic performance via robust electric and magnetic fields' modulation to promote the separation and transfer of photoexcited carriers, and phase control at reactive interface to lower photocatalytic reaction energy barrier and facilitate mass transfer. These three research directions have received soaring attention in photocatalytic field. Herein, recent advances in photocatalysis modulated by electric field (i.e., piezoelectric, pyroelectric, and triboelectric fields, as well as their coupling) with specific examples and mechanisms discussion are first examined. Subsequently, the strategy via magnetic field manipulation for enhancing photocatalytic performance is scrutinized, including the spin polarization, Lorentz force, and magnetoresistance effect. Afterward, materials with tailored structure and composition design enabled by reactive phase control and their applications in photocatalytic hydrogen evolution and carbon dioxide reduction are reviewed. Finally, the challenges and potential opportunities to further boost photocatalytic efficiency are presented, aiming at providing crucial theoretical and experimental guidance for those working in photocatalysis, ferroelectrics, triboelectrics, piezo-/pyro-/tribo-phototronics, and electromagnetics, among other related areas.

Enhanced piezotronics by single-crystalline ferroelectrics for uniformly strengthening the piezo-photocatalysis of electrospun BaTiO3@TiO2 nanofibers

Turning the built-in electric field by modulating the morphology and microstructure of ferroelectric materials is considered a viable approach to enhancing the piezo-photocatalytic activity of the ferroelectric/oxide semiconductor heterojunctions. Here, hydrothermally synthesized single-crystalline BaTiO₃ nanoparticles are employed to construct BaTiO₃@TiO₂ hybrid nanofibers by sol-gel assisted electrospinning of TiO₂ nanofibers and annealing. Because of the obvious enhancement of the synergetic piezo-photocatalytic effect under both ultrasonic and ultraviolet (UV) light irradiation, the piezo-photocatalytic degradation rate constant (k) of BaTiO₃@TiO₂ hybrid nanofibers on methyl orange (MO) reaches 14.84 × 10^-2 min^-1, which is approximately seven fold that for piezocatalysis and six fold that for photocatalysis. Moreover, BaTiO₃@TiO₂ core-shell nanoparticles are also synthesized for comparison purposes to assess the influence of microstructure on the piezo-photocatalysis by a wet-chemical coating of TiO₂ on BaTiO₃ nanoparticles. Such a high piezo-photocatalytic activity is attributed to the enhancement of the piezotronic effect by the single-crystalline ferroelectric nanoparticles and the nanoconfinement effect caused by the one-dimensional boundary of nanofibers with high specific surface areas. The mechanically induced uniform local built-in electric fields originated from the single-crystalline ferroelectric nanoparticles can enhance the separation of photogenerated electron and hole pairs and promote the formation of free hydroxyl radicals, resulting in a strong piezotronic effect boosted photochemical degradation of organic dye. This work introduces the single-crystalline ferroelectrics to construct ferroelectric/oxide semiconductor heterojunctions, and the enhanced local piezotronic effect uniformly strengthens the photochemical reactivity, which offers a new option to design high-efficiency piezo-photocatalysts for pollutant treatment.

Accelerating Nickel-Based Molecular Construction via DFT Guidance for Advanced Photocatalytic Hydrogen Production

Understanding the nickel-based molecular catalyst structure and functional relationship is crucial for catalytic hydrogen production in aqueous solutions. Density functional theory (DFT) provides mature theoretical knowledge for efficient catalyst design, significantly reducing catalyst synthesis time and energy consumption. In the present work, three molecular catalysts, Ni(qbz)(pys)₂ (qbz = 2-quinoline benzimidazole) (NQP 1), Ni(qbo)(pys)₂ (qbo = 2-quinoline benzothiazole) (NQP 2), and Ni(pbz)(pys)₂ (pbz = 4-chloro-2,2-pyridylbenzimidazole) (NQP 3) (pys = 2-mercaptopyridine), were designed and synthesized and exhibit a high performance for H₂ generation in aqueous solution with a lamp (λ ≥ 400 nm) under visible light irradiation. Under the optimal conditions, a H₂ evolution rate as high as 1190 μmol h^-1 can be obtained over 25 mg of NQP 1 with the best catalytic performance. DFT has been adopted in this study to unveil the relationship between the ligand qbz and catalyst NQP 1─an efficient step in the design of catalysts with an excellent catalytic performance. We show that, in addition to the presence of the triphenyl ring increasing the overall electron density, rapid electron transfer (ET) from excited fluorescein (Fl) to NQP 1 significantly improves the chance of photogenerated electrons transferring to the active site, ultimately increasing the catalytic activity for H₂ production. This work on understanding the correlation between structures and properties of complexes provides a new idea for manufacturing high-performance photocatalysts.

The mechanism of enhanced photocatalytic activity for water-splitting of ReS2 by strain and electric field engineering

To enhance the photocatalytic water splitting performance of 2D ReS₂, we theoretically propose a feasible strategy to engineer its band structure by applying strain or an electric field. Our calculated results show that the strains greatly tune the electronic structure of ReS₂ especially band gap and band edge positions, because the strains significantly alter the crystal structure and then cause rearrangement of the surface charge. However, electric fields have little influence on band gap but obviously affect the band edge positions. This is because the electric fields have little effect on the crystal structure of ReS₂ but easily produce an in-plane electric dipole moment. The shifts in band edge position mainly arise from competition between the surface charge and the in-plane electric dipole. For an applied strain, the shifts are dominated by rearrangement of surface charge; for an applied electric field, the shifts are determined by an induced electric dipole moment. Importantly, functionalized ReS₂ with a bi-axial strain of −4% or an electronic field of −0.1 V Å⁻¹ may be good candidates for water-splitting photocatalysts owing to their suitable band edge positions for water splitting, ideal band gaps, good stability, reduced electron–hole recombination and high carrier mobility. We hope our findings will stimulate experimental efforts to develop new photocatalysts based on functionalized ReS₂.

This work proposes applying the strain and electric filed to engineer the band structure of 2D ReS₂ and enhance its photocatalytic activity for hydrogen production through water-splitting.

Linking the enhanced deep NO oxidation of a ferroelectric K0.5Bi0.5TiO3 nanowire photocatalyst to its spontaneous polarization and oxygen vacancies

The mechanism of NOx photo-oxidation and the pathway of photogenerated charge carries mechanism over K0.5Bi0.5TiO3 photocatalyst.