Interfacial Dynamics in Supported Ultrathin Polymer Films-From the Solid to the Free Interface

Dynamics of Polymer Films on Polymer-Grafted Substrates: A Molecular Dynamics Simulation

For substrate-supported polymer films, the tails of adsorbed chains are generally assumed to play important roles in the propagation of the substrate's effect inside polymer films. The effects of the grafting density and the rigidity of substrate-grafted polymers, the simplest model for the adsorbed tails, on the diffusivity of film polymers are investigated by performing molecular dynamics simulations. An optimal grafting density σo, around the critical grafting density for the transition from "mushroom" to "brush", is found with the most pronounced suppression of diffusivity on the film polymers; i.e., the penetration of the film polymers into the grafting layer reaches the maximum. However, at high grafting density, the crowded and vertically stretched brush excludes the coil-like film polymers, and the suppression is thus reduced. At σo, with an increase in the rigidity of the grafted polymers, the suppression is increased quickly at low rigidity but slowly at high rigidity. The dynamic suppression is attributed to the combination of the conformation change from stretching at low rigidity to tilted orientation at high rigidity and decelerated mobility induced by the rigidity. The stretching conformation enhances, whereas the tilted conformation weakens the interpenetration between the grafted polymers and the film polymers. Our results reflect the importance of both conformational variation and interchain interaction in the interface region.

Relaxation dynamics of a liquid in the vicinity of an attractive surface: The process of escaping from the surface

We analyze the displacements of the particles of a glass-forming molecular liquid perpendicular to a confining solid surface using extensive molecular dynamics simulations with atomistic models. In the vicinity of an attractive surface, the liquid molecules are trapped. Transient localization of liquid molecules near the surface introduces a relaxation process related to the escape of molecules from the surface into the dynamics of the interfacial liquid layer. To describe this process, we analyze several dynamical observables of the confined liquid. The self-intermediate scattering function and the mean-squared displacement of the particles located in the interfacial layer are dominated by the process of escaping from the surface. This relaxation process is also associated with a strong heterogeneity in the mobility of the interfacial particles. The studied model liquid is hydrogenated methyl methacrylate. For the confining wall, we consider different models, namely a periodic single layer of graphene and a frozen amorphous configuration of the bulk liquid (frozen wall). Near graphene, where the liquid molecules form a layered structure and adopt parallel-to-surface orientation, a clear separation between small-scale movements of the molecules near the surface and the process of escaping from the surface is observed. This is reflected in the three-step relaxation of the interfacial layer. However, near the frozen wall, where the liquid molecules do not have a preferential alignment, a clear three-step relaxation is not seen, even though the dynamical quantities are controlled by the process of escaping from the surface.

Interfacial Effects in Conductivity Measurements of Block Copolymer Electrolytes

The ionic conductivity in lamellar block copolymer electrolytes is often anisotropic, where the in-plane conductivity exceeds the through-plane conductivity by up to an order of magnitude. In a prior work, we showed significant anisotropy in the ionic conductivity of a lamellar block copolymer based on polystyrene (PS) and a polymer ionic liquid (PIL), and we proposed that the through-film ionic conductivity was depressed by layering of lamellar domains near the electrode surface. In the present work, we first tested that conclusion by measuring the through-plane ionic conductivity of two model PIL-based systems having controlled interfacial profiles using impedance spectroscopy. The measurements were not sensitive to changes in interfacial composition or structure, so anisotropy in the ionic conductivity of PS-block-PIL materials must arise from an in-plane enhancement rather than a through-plane depression. We then examined the origin of this in-plane enhancement with a series of PS-block-PIL materials, a P(S-r-IL) copolymer, and a PIL homopolymer, where impedance spectra were acquired with a top-contact electrode configuration. These studies show that enhanced in-plane ionic conductivities are correlated with the formation of an IL-rich wetting layer at the free surface, which presumably provides a low-resistance path for ion transport between the electrodes. Importantly, the enhanced in-plane ionic conductivities in these PS-block-PIL materials are consistent with simple geometric arguments based on properties of the PIL, while the through-plane values are an order of magnitude lower. Consequently, it is critical to understand how surface and bulk effects contribute to impedance spectroscopy measurements when developing structure-conductivity relations in this class of materials.

On the Segmental Dynamics and the Glass Transition Behavior of Poly(2-vinylpyridine) in One- and Two-Dimensional Nanometric Confinement

Geometric nanoconfinement, in one and two dimensions, has a fundamental influence on the segmental dynamics of polymer glass-formers and can be markedly different from that observed in the bulk state. In this work, with the use of dielectric spectroscopy, we have investigated the glass transition behavior of poly(2-vinylpyridine) (P2VP) confined within alumina nanopores and prepared as a thin film supported on a silicon substrate. P2VP is known to exhibit strong, attractive interactions with confining surfaces due to the ability to form hydrogen bonds. Obtained results show no changes in the temperature evolution of the α-relaxation time in nanopores down to 20 nm size and 24 nm thin film. There is also no evidence of an out-of-equilibrium behavior observed for other glass-forming systems confined at the nanoscale. Nevertheless, in both cases, the confinement effect is seen as a substantial broadening of the α-relaxation time distribution. We discussed the results in terms of the importance of the interfacial energy between the polymer and various substrates, the sensitivity of the glass-transition temperature to density fluctuations, and the density scaling concept.

Gradient of Segmental Dynamics in Stereoregular Poly(Methyl Methacrylate) Melts Confined between Pristine or Oxidized Graphene Sheets

Segmental dynamics in unentangled isotactic, syndiotactic, and atactic poly(methyl methacrylate) (i-, a-, and s-PMMA) melts confined between pristine graphene, reduced graphene oxide, RGO, or graphene oxide, GO, sheets is studied at various temperatures, well above glass transition temperature, via atomistic molecular dynamics simulations. The model RGO and GO sheets have different degrees of oxidization. The segmental dynamics is studied through the analysis of backbone torsional motions. In the vicinity of the model nanosheets (distances less than ≈2 nm), the dynamics slows down; the effect becomes significantly stronger with increasing the concentration of the surface functional groups, and hence increasing polymer/surface specific interactions. Upon decreasing temperature, the ratios of the interfacial segmental relaxation times to the respective bulk relaxation times increase, revealing the stronger temperature dependence of the interfacial segmental dynamics relative to the bulk dynamics. This heterogeneity in temperature dependence leads to the shortcoming of the time-temperature superposition principle for describing the segmental dynamics of the model confined melts. The alteration of the segmental dynamics at different distances, d, from the surfaces is described by a temperature shift, ΔTseg(d) (roughly speaking, shift of a characteristic temperature). Next, to a given nanosheet, i-PMMA has a larger value of ΔTseg than a-PMMA and s-PMMA. This trend correlates with the better interfacial packing and longer trains of i-PMMA chains. The backbone torsional autocorrelation functions are shown in the frequency domain and are qualitatively compared to the experimental dielectric loss spectra for the segmental α-relaxation in polymer nanocomposites. The εT″(f) (analogous of dielectric loss, ε″(f), for torsional motion) curves of the model confined melts are broader (toward lower frequencies) and have lower amplitudes relative to the corresponding bulk curves; however, the peak frequencies of the εT″(f) curves are only slightly affected.