Ferroelectricity in Hybrid Perovskites

Effect of Halide Tuning on the Structural, Dielectric, and Optical Properties of Two-Dimensional 2-Chloroethylammonium Lead Halides

Layered hybrid organic-inorganic lead halides have gained a lot of attention for optoelectronic applications. A notable subset within this category is perovskites comprising halogenated amines since they may exhibit reduced band gap or polar order. We synthesized three compounds comprising 2-chloroethylammonium (CEA+) cations, with the chemical formula CEA2PbX4 (X = Cl, Br, I). X-ray diffraction studies show that at room temperature (RT), CEA2PbBr4 and CEA2PbI4 crystallize in Pbnm symmetry, with ordered CEA+ cations. CEA2PbBr4 and CEA2PbI4 undergo one structural phase transition (PT) into a disordered Pmnm phase near 315 and 360 K, respectively. CEA2PbCl4 shows a different packing of CEA+ with the organic chains oriented perpendicularly to the perovskite layers. It undergoes two PTs at 332 and 203 K from the high-temperature (HT) disordered I4/mmm phase to the partially ordered intermediate Pbnm phase and completely ordered low-temperature (LT) phase of the unknown space group. All compounds emit photoluminescence (PL): orange, yellow-green, and yellow for CEA2PbI4, CEA2PbCl4, and CEA2PbBr4, respectively, and bromide exhibits a very high quantum efficiency of 48%. Overall, our findings show that halide engineering strongly modulates hydrogen and halogen bonding strength, affecting the structural arrangement of building units, molecular dynamics, and thus optoelectronic properties.

A tellurium iodide perovskite structure enabling eleven-electron transfer in zinc ion batteries

The growing potential of low-dimensional metal-halide perovskites as conversion-type cathode materials is limited by electrochemically inert B-site cations, diminishing the battery capacity and energy density. Here, we design a benzyltriethylammonium tellurium iodide perovskite, (BzTEA)2TeI6, as the cathode material, enabling X- and B-site elements with highly reversible chalcogen- and halogen-related redox reactions, respectively. The engineered perovskite can confine active elements, alleviate the shuttle effect and promote the transfer of Cl- on its surface. This allows for the utilization of inert high-valent tellurium cations, eventually realizing a special eleven-electron transfer mode (Te6+/Te4+/Te2-, I+/I0/I-, and Cl0/Cl-) in suitable electrolytes. The Zn||(BzTEA)2TeI6 battery exhibited a high capacity of up to 473 mAh g-1Te/I and a large energy density of 577 Wh kg-1 Te/I at 0.5 A g-1, with capacity retention up to 82% after 500 cycles at 3 A g-1. The work sheds light on the design of high-energy batteries utilizing chalcogen-halide perovskite cathodes.

High-Temperature Molecular Ferroelectric [C4N2H14]2[Sb2I10] with Narrow Bandgap and Switchable Photoelectric Response

Organic-inorganic hybrid ferroelectrics have attracted considerable attention due to their outstanding piezoelectricity, mechanical flexibility, and robust nonlinear optical properties. But the species with above room-temperature (RT) ferroelectricity, visible-light bandgap, and high photoelectric performance are still scarce. Herein, a novel organic-inorganic hybrid ferroelectric [C4N2H14]2[Sb2I10] has been synthesized hydrothermally and employed as a light-absorbing layer in organic-inorganic hybrid solar cells. A polar monoclinic structure with a space group of Pn was resolved by single-crystal XRD. A direct band gap of 1.89 eV was revealed in [C4N2H14]2[Sb2I10] by UV-vis spectroscopy and density functional theory (DFT) studies. A dramatic enhancement in photoelectric performance has been achieved by turning the ferroelectric polarization, leading to a maximum Voc ∼ 0.52 V and Jsc ∼ 15.52 μA/cm2, which are 15-fold and 29-fold higher than those of the unpoled sample, respectively. This work may open new avenues for the application of molecular ferroelectrics in optoelectronic devices.

A-Site Cation Chemistry in Halide Perovskites

Metal halide perovskites are an important class of semiconductors now being implemented as photovoltaic absorbers and explored for light emission, among other device applications. The semiconducting properties of halide perovskites are deeply intertwined with their composition and structure. Specifically the symmetry, tilting, and distortions of the metal halide octahedra impact the band structure and other optoelectronic properties. In this review, we examine the various compositions of monovalent A-site cations in three-dimensional (3D) halide perovskites AMX3 (M = divalent metal; X = halide). We focus on how the A-site cation templates the inorganic metal-halide perovskite framework, resulting in changes in the crystal structure symmetry, as well as M-X bonding parameters, summarized in a comprehensive table of AMX3 structures. The A-site cation motion, effects of alloying, and 2D Ruddlesden-Popper perovskite structures with unique A-site cations are further overviewed. Correlations are shown between these A-site cation dominated structural parameters and the resulting optoelectronic properties such as band gap. This review should serve as a reference for the A-site cation structural chemistry of metal halide perovskites and inspire continued research into less explored metal halide perovskite compositions and structures.

Machine learning-enhanced band gaps prediction for low-symmetry double and layered perovskites

Density functional theory (DFT) calculations are widely used for material property prediction, but their computational cost can hinder the discovery of novel perovskites. This work explores machine learning (ML) as a faster alternative for predicting band gaps in complex perovskites, focusing on low-symmetry double and layered structures. We employ Support Vector Regression (SVR), Random Forest Regression (RFR), Gradient Boosting Regression (GBR), and Extreme Gradient Boosting (XGBoost) to predict both direct and indirect band gaps. Model performance is evaluated using Mean Absolute Error (MAE), Mean Squared Error (MSE), and R-squared (R²) metrics. Our results reveal SVR as the most effective general model for predicting band gaps in both double and layered perovskites. Interestingly, for double perovskites specifically, XGBoost achieves even higher accuracy when incorporating derivative discontinuity as a feature. Feature importance analysis identifies the standard deviation of valence charges ("Valence (std)") as the most critical factor for band gap prediction across all studied perovskites. This research demonstrates the potential of ML for efficient and accurate band gap prediction in complex perovskites, accelerating material discovery efforts.

Photo-ferroelectric perovskite interfaces for boosting VOC in efficient perovskite solar cells

Interface engineering is the core of device optimization, and this is particularly true for perovskite photovoltaics (PVs). The steady improvement in their performance has been largely driven by careful manipulation of interface chemistry to reduce unwanted recombination. Despite that, PVs devices still suffer from unavoidable open circuit voltage (VOC) losses. Here, we propose a different approach by creating a photo-ferroelectric perovskite interface. By engineering an ultrathin ferroelectric two-dimensional perovskite (2D) which sandwiches a perovskite bulk, we exploit the electric field generated by external polarization in the 2D layer to enhance charge separation and minimize interfacial recombination. As a result, we observe a net gain in the device VOC reaching 1.21 V, the highest value reported to date for highly efficient perovskite PVs, leading to a champion efficiency of 24%. Modeling depicts a coherent matching of the crystal and electronic structure at the interface, robust to defect states and molecular reorientation. The interface physics is finely tuned by the photoferroelectric field, representing a new tool for advanced perovskite device design.

Highly Stable MOF-Type Lead Halide Luminescent Ferroelectrics

Lead halide molecular ferroelectrics represent an important class of luminescent ferroelectrics, distinguished by their high chemical and structural tunability, excellent processability and distinctive luminescent characteristics. However, their inherent instability, prone to decomposition upon exposure to moisture and light, hinders their broader ferroelectric applications. Herein, for the first time, we present a series of isoreticular metal-organic framework (MOF)-type lead halide luminescent ferroelectrics, demonstrating exceptional robustness under ambient conditions for at least 15 months and even when subjected to aqueous boiling conditions. Unlike conventional metal-oxo secondary building units (SBUs) in MOFs adopting highly centrosymmetric structure with limited structural distortion, our lead halide-based MOFs occupy structurally deformable [Pb2X]+ (X=Cl-/Br-/I-) SBUs that facilitate a c-axis-biased displacement of Pb2+ centers and substantially contribute to thermoinducible structural transformation. Importantly, this class of MOF-type lead halide ferroelectrics undergo ferroelectric-to-paraelectric phase transitions with remarkably high Curie temperature of up to 505 K, superior to most of molecular ferroelectrics. Moreover, the covalent bonding between phosphorescent organic component and the light-harvesting inorganic component achieves efficient spin-orbit coupling and intersystem crossing, resulting in long-lived afterglow emission. The compelling combination of high stability, ferroelectricity and afterglow emission exhibited by lead halide MOFs opens up many potential opportunities in energy-conversion applications.

Large dynamic scissoring mode displacements coupled to band gap opening in the cubic phase of the methylammonium lead halide perovskites

Hybrid perovskites are a rapidly growing research area, having reached photovoltaic power conversion efficiencies of over 25%. There is a increasing consensus that the structures of these materials, and hence their electronic structures, cannot be understood purely from the time and space averaged crystal structures observable by conventional methods. We apply a symmetry-motivated analysis method to analyse x-ray pair distribution function data of the cubic phases of the hybrid perovskites MAPbX3(X= I, Br, Cl). We demonstrate that, even in the cubic phase, the local structure of the inorganic components of MAPbX3(X= I, Br, Cl), are dominated by scissoring type deformations of the PbX6octahedra. We find these modes to have a larger amplitude than equivalent distortions in theA-site deficient perovskite ScF3and demonstrate that they show a significant departure from the harmonic approximation. Calculations performed on an inorganic perovskite analogue, FrPbBr3, show that the large amplitudes of the scissoring modes are coupled to a dynamic opening of the electronic band gap. Finally, we use density functional theory calculations to show that the organic MA cations reorientate to accommodate the large amplitude scissoring modes.

Piezoelectric Charge Coefficient of Halide Perovskites

Halide perovskites are an emerging family of piezoelectric and ferroelectric materials. These materials can exist in bulk, single-crystal, and thin-film forms. In this article, we review the piezoelectric charge coefficient (dij) of single crystals, thin films, and dimension-tuned halide perovskites based on different measurement methods. Our study finds that the (dij) coefficient of the bulk and single-crystal samples is mainly measured using the quasi-static (Berlincourt) method, though the piezoforce microscopy (PFM) method is also heavily used. In the case of thin-film samples, the (dij) coefficient is dominantly measured by the PFM technique. The reported values of dij coefficients of halide perovskites are comparable and even better in some cases compared to existing materials such as PZT and PVDF. Finally, we discuss the promising emergence of quasi-static methods for thin-film samples as well.

Ferroelectricity and Thermochromism in a 2D Dion-Jacobson Organic-Inorganic Hybrid Perovskite

2D organic-inorganic hybrid perovskites (OIHPs) have become one of the hottest research topics due to their excellent environmental stability and unique optoelectronic properties. Recently, the ferroelectricity and thermochromism of 2D OIHPs have attracted increasing interests. Integrating ferroelectricity and thermochromism into perovskites can significantly promote the development of multichannel intelligent devices. Here, a novel 2D Dion-Jacobson OIHP of the formula (3AMP)PbI4 (where 3AMP is 3-(aminomethyl)pyridinium) is reported, which has a remarkable spontaneous polarization value (Ps) of 15.6 µC cm-2 and interesting thermochromism. As far it is known, such a large Ps value is the highest for 2D OIHPs recorded so far. These findings will inspire further exploration and application of multifunctional perovskites.

High-Entropy Lead-Free Perovskite Bi0.2K0.2Ba0.2Sr0.2Ca0.2TiO3 Powders and Related Ceramics: Synthesis, Processing, and Electrical Properties

A novel high-entropy perovskite powder with the composition Bi0.2K0.2Ba0.2Sr0.2Ca0.2TiO3 was successfully synthesized using a modified Pechini method. The precursor powder underwent characterization through Fourier Transform Infrared Spectroscopy and thermal analysis. The resultant Bi0.2K0.2Ba0.2Sr0.2Ca0.2TiO3 powder, obtained post-calcination at 900 °C, was further examined using a variety of techniques including X-ray diffraction, Raman spectroscopy, X-ray fluorescence, scanning electron microscopy, and transmission electron microscopy. Ceramic samples were fabricated by conventional sintering at various temperatures (900, 950, and 1000 °C). The structure, microstructure, and dielectric properties of these ceramics were subsequently analyzed and discussed. The ceramics exhibited a two-phase composition comprising cubic and tetragonal perovskites. The grain size was observed to increase from 35 to 50 nm, contingent on the sintering temperature. All ceramic samples demonstrated relaxor behavior with a dielectric maximum that became more flattened and shifted towards lower temperatures as the grain size decreased.

A Two-Dimensional Hybrid Lead Bromide Ferroelectric Semiconductor with an Out-of-Plane Polarization

A two-dimensional (2D) organic-inorganic hybrid perovskite (OIHP) material with out-of-plane ferroelectricity is the key to the miniaturization of vertical-sandwich-type ferroelectric optoelectronic devices. However, 2D OIHP ferroelectrics with out-of-plane polarization are still scarce, and effective design strategies are lacking. Herein, we report a novel 2D Dion-Jacobson perovskite ferroelectric semiconductor synthesized by a rigid-to-flexible cationic tailoring strategy, achieving an out-of-plane polarization of 1.7 μC/cm2 and high photoresponse. Integrating out-of-plane ferroelectricity with excellent photoelectric properties affords a promising platform to investigate ferroelectricity-related effects in vertical optoelectronic devices.