Electrochemical/mechanical coupling in ion-conducting soft matter

Humidity-Dependent Hydration and Proton Conductivity of PFSA Ionomer Thin Films at Fuel-Cell-Relevant Temperatures: Effect of Ionomer Equivalent Weight and Side-Chain Characteristics

Studies on the hydration properties, proton conductivity, and water content of perfluorinated ionomer thin films at temperatures relevant to fuel cell operation temperatures (around 80 °C) and the effect of ionomer chemistry are scarce. In this work, we report the water content and proton conductivity properties of thin-film ionomers (30 nm) at 80 °C over a wide range of relative humidity (0-90%) for seven different ionomers differing in the side-chain structure, including the number of protogenic groups, with the equivalent weight ranging from 620 to 1100 g/mol of sulfonic acid. The results show that the acid content or equivalent weight of the ionomer is the strongest determinant of both the swelling and the proton conductivity of ionomer films at a given relative humidity. The molar water content (λ) of ionomer films normalized to the molar protogenic group is observed to be equivalent-weight-dependent, implying that the affinity for water is acid-content-dependent. At high relative humidity conditions (>70%) pertinent to fuel cell operations, the proton conductivity of low-equivalent-weight ionomers was higher than that of higher-equivalent-weight ionomers. However, upon correlating the proton conductivity with molar water content (λ), the differences reduce dramatically, highlighting that water content is the controlling factor for proton conduction. Significantly higher values of both water content and proton conductivity are observed at 80 °C compared to those at 30 °C, implying that room temperature data are not reliable for estimating ionomer properties in the fuel cell catalyst layer.

Electroactive Ionic Soft Actuators with Monolithically Integrated Gold Nanocomposite Electrodes

Electroactive ionic gel/metal nanocomposites are produced by implanting supersonically accelerated neutral gold nanoparticles into a novel chemically crosslinked ion conductive soft polymer. The ionic gel consists of chemically crosslinked poly(acrylic acid) and polyacrylonitrile networks, blended with halloysite nanoclays and imidazolium-based ionic liquid. The material exhibits mechanical properties similar to that of elastomers (Young's modulus ≈ 0.35 MPa) together with high ionic conductivity. The fabrication of thin (≈100 nm thick) nanostructured compliant electrodes by means of supersonic cluster beam implantation (SCBI) does not significantly alter the mechanical properties of the soft polymer and provides controlled electrical properties and large surface area for ions storage. SCBI is cost effective and suitable for the scaleup manufacturing of electroactive soft actuators. This study reports the high-strain electromechanical actuation performance of the novel ionic gel/metal nanocomposites in a low-voltage regime (from 0.1 to 5 V), with long-term stability up to 76 000 cycles with no electrode delamination or deterioration. The observed behavior is due to both the intrinsic features of the ionic gel (elasticity and ionic transport capability) and the electrical and morphological features of the electrodes, providing low specific resistance (<100 Ω cm^-2 ), high electrochemical capacitance (≈mF g^-1 ), and minimal mechanical stress at the polymer/metal composite interface upon deformation.

New Insights into Perfluorinated Sulfonic-Acid Ionomers

In this comprehensive review, recent progress and developments on perfluorinated sulfonic-acid (PFSA) membranes have been summarized on many key topics. Although quite well investigated for decades, PFSA ionomers' complex behavior, along with their key role in many emerging technologies, have presented significant scientific challenges but also helped create a unique cross-disciplinary research field to overcome such challenges. Research and progress on PFSAs, especially when considered with their applications, are at the forefront of bridging electrochemistry and polymer (physics), which have also opened up development of state-of-the-art in situ characterization techniques as well as multiphysics computation models. Topics reviewed stem from correlating the various physical (e.g., mechanical) and transport properties with morphology and structure across time and length scales. In addition, topics of recent interest such as structure/transport correlations and modeling, composite PFSA membranes, degradation phenomena, and PFSA thin films are presented. Throughout, the impact of PFSA chemistry and side-chain is also discussed to present a broader perspective.

Multi-Scale Mechanical Behavior of the Li3PS4 Solid-Phase Electrolyte

The need for smaller, lighter, and longer lasting rechargeable batteries is projected to increase rapidly in the coming years because of high demand for portable electronics and electric vehicles. While traditional Li-ion batteries use liquid-phase electrolytes, these suffer from safety risks and low energy density. Solid-phase electrolytes can avoid these issues by enabling a Li metal anode, but tend to fail during cycling due to Li metal dendrite growth between the electrodes. Because Li dendrite nucleation and growth can be viewed in terms of the mechanical behavior of the battery components, it is critical to understand the mechanical response of candidate electrolyte materials. In this work, we use nanoindentation and bulk acoustic techniques to characterize the mechanical properties of β-Li₃PS₄, a promising Li-ion conducting ceramic. We find that the bulk and shear moduli of an 80% dense bulk LPS sample are 10-12 GPa and 5-6 GPa, respectively. Although this value of shear modulus may be too low to prevent Li dendrite propagation, it is likely that there are many other mechanical properties that must be taken into account to fully understand Li dendrite nucleation and growth. Ultimately, this work represents a first step in understanding the relationship between Li₃PS₄ separator manufacture and its mechanical properties.