Strong Stretching of Poly(ethylene glycol) Brushes Mediated by Ionic Liquid Solvation

Spreading Dynamics of a Precursor Film of Ionic Liquid or Water on a Micropatterned Polyelectrolyte Brush Surface

Time evolution of the microscopic wetting velocity of 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (EMI-TFSI) or water on a micrometer-scale line-patterned surface with a poly(3-sulfopropyl methacrylate) brush and a hydrophobic perfluoroalkyl monolayer was precisely measured by direct observation using optical microscopy and a selective dyeing method over a long period (178 days). When a liquid droplet was placed on the dyed line-patterned brush surface, the liquid penetrated and spread into the polymer brush layer, forming a precursor thin film that extended beyond the macroscopic contact line. The elongation proceeded in two stages by an adiabatic process followed by a diffusive process. The elongation distance X increased with time in proportion to t^2.6 for water and t^0.81 for EMI-TFSI during the adiabatic process. In a diffusive process, the advancing velocity of the precursor film was markedly reduced to be expressed as X ∝ t^0.66 for water and X ∝ t^0.21 for EMI-TFSI, indicating that the diffusive process was affected by the energy dissipation of the wetting system. The high viscosity and the strong molecular interaction of EMI-TFSI with the polymer brush gave a large entropy change during the wetting process to result in a slower spreading velocity.

Mixing oil and water with ionic liquids: bicontinuous microemulsions under confinement

We report the structural transition of a phosphonium ionic liquid-based microemulsion from the bulk to nanoconfined between atomically flat micas. Upon the nanoconfinement, we observed a firmly surface-adsorbed ionic liquid film that stabilizes the nanoconfined microemulsion. Further confinement (<11 nm) induces rearrangements in the microemulsion culminating into two well-ordered layers with slow dynamics.

Influence of Water on Structure, Dynamics, and Electrostatics of Hydrophilic and Hydrophobic Ionic Liquids in Charged and Hydrophilic Confinement between Mica Surfaces

Water is ubiquitous in the environment and is the origin for operational constraints in ionic-liquid based electrolytes for supercapacitors. In this study, the influence of water on the interfacial behavior of hydrophilic (1-ethyl-3-methylimidazolium ethylsulfate, abbr. [EMIM][EtSO₄]) and hydrophobic (1-ethyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, abbr. [EMIM][FAP] and [EMIM][TFSI], respectively) ionic liquids (ILs) confined between mica surfaces was investigated at separations precisely modulated by a surface force apparatus and at controlled relative humidity between 0% and 50% RH. Diffusion experiments revealed that water spontaneously invades the nanoconfined ILs above a certain humidity threshold and that the confined hydrophobic IL is completely replaced by water at sufficiently high environmental humidity (∼45% here) as a result of surface-induced phase separation. This behavior is expected to be universal for other ILs that are not fully miscible with water when they are confined in hydrophilic nanopores of a few nanometers in width. The effect of environmental humidity on interfacial structure, dynamics, and electrostatics was studied via dynamic force measurements. In the dry state, several layers of ions are immobilized on the mica surface, and the effective viscosity increases by up to 2 orders of magnitude with a decrease in film thickness from ∼10 to ∼3 nm. Based on recent work, it is proposed that nanoconfinement enhances the anion-cation association in highly concentrated electrolytes, thereby justifying the loss of fluidity of the ILs. When phase separation is excluded, water is intercalated in the layered structure of the three ILs, and it leads to a change of the layer thickness compared to the dry state. Furthermore, our results reveal that interfacial water prevents ions from being immobilized on the surface and facilitates the outflow of both hydrophilic and hydrophobic ILs by reducing their effective viscosity in the order [EMIM][FAP] < [EMIM][TFSI] < [EMIM][EtSO₄]. The underlying mechanisms are evaluated by considering the roles of water in enhancing ion dissociation through screening of electrostatic interactions and solvation of the selected ILs to different extents. The discussed experimental observations support the recent discoveries made by molecular dynamic simulations and neutron scattering studies that using hydrophilic ILs coupled with water as cosolvent could lead to the enhanced power density of IL-based supercapacitors, and therefore, that water-in-(hydrophilic) ILs is a direction worth exploring as electrolytes for supercapacitors.

Wetting Behavior and Tribological Properties of Polymer Brushes on Laser-Textured Surface

Polymer brush layers can act as effective lubricants owing to their low friction and good controllability. However, their application to the field of tribology is limited by their poor wear resistance. This study proposes a strategy combining grafting and surface texturing to extend the service life of polymer brushes. Surface microstructure and chemical composition were measured through scanning electron microscopy (SEM), atomic force microscopy (AFM), and X-ray photoelectron spectroscopy (XPS). Water contact angles were measured to evaluate the surface wettability of the grafted silicon-based surface texture. Results showed the distinct synergistic effect between polymer brushes and laser surface texturing (LST). The prepared polymer brushes on textured surface can be a powerful mechanism for friction reduction properties, which benefit from their strong hydration effect on the lubrication liquid and promote the formation of a local lubricating film. Moreover, the wear life of polymer brushes can be immensely extended, as micro-dimples on the textured surface can effectively protect the polymer brushes. This study presents a method to enhance the load-bearing capacity and wear resistance of the grafted surface of polymer brushes.

Molecular Mechanisms Underlying Lubrication by Ionic Liquids: Activated Slip and Flow

The present study provides molecular insight into the mechanisms underlying energy dissipation and lubrication of a smooth contact lubricated by an ionic liquid. We have performed normal and lateral force measurements with a surface forces apparatus and by colloidal probe atomic force microscopy on the following model systems: 1-ethyl-3-methyl imidazolium bis-(trifluoro-methylsulfonyl) imide, in dry state and in equilibrium with ambient (humid) air; the surface was either bare mica or functionalized with a polymer brush. The velocity-dependence of the friction force reveals two different regimes of lubrication, boundary-film lubrication, with distinct characteristics for each model system, and fluid-film lubrication above a transition velocity V∗. The underlying mechanisms of energy dissipation are evaluated with molecular models for stress-activated slip and flow, respectively. The stress-activated slip assumes that two boundary layers (composed of ions/water strongly adsorbed to the surface) slide past each other; the dynamics of interionic interactions at the slip plane and the strength of the interaction dictate the change in friction -decreasing, increasing or remaining constant- with velocity in the boundary-film lubrication regime. Above a transition velocity V∗, friction monotonically increases with velocity in the three model systems. Here, multiple layers of ions slide past each other (“flow”) under a shear stress and friction depends on a shear-activation volume that is significantly affected by confinement. The proposed friction model provides a molecular perspective of the lubrication of smooth contacts by ionic liquids and allows identifying the physical parameters that control friction.