Interfacial processes underlying the temperature-dependence of friction and wear of calcite single crystals

HYPOTHESIS

This study posits that thermal effects play a substantial role in influencing interfacial processes on calcite, and consequently impacting its mechanochemical properties.

EXPERIMENTS

This work interrogates the temperature-dependence of friction and wear at nanoscale contacts with calcite single crystals at low air humidity (≤ 3-10 % RH) by AFM.

FINDINGS

Three logarithmic regimes for the velocity-dependence of friction are identified. BelowTc ∼ 70 °C, where friction increases with T, there is a transition from velocity-weakening (W1) to velocity-strengthening friction (S1). AboveTc ∼ 70 °C, where friction decreases with T, a second velocity-strengthening friction regime (S0) precedes velocity-weakening friction (W1). The low humidity is sufficient to induce atomic scale changes of the calcite cleavage plane due to dissolution-reprecipitation, and more so at higher temperature and 10 % RH. Meanwhile, the surface softens above Tc -likely owing to lattice dilation, hydration and amorphization. These interfacial changes influence the wear mechanism, which transitions from pit formation to plowing with increase in temperature. Furthermore, the softening of the surface justifies the appearance of the second velocity-strengthening friction regime (S0). These findings advance our understanding of the influence of temperature on the interfacial and mechanochemical processes involving calcite, with implications in natural processes and industrial manufacturing.

Surface Curvature Enhances the Electrotunability of Ionic Liquid Lubrication

Ionic liquids (ILs) are a promising class of lubricants that allow dynamic friction control at electrified interfaces. In the real world, surfaces inevitably exhibit some degree of roughness, which can influence lubrication. In this work, we deposited single-layer graphene onto 20 nm silica nanoparticle films to investigate the effect of surface curvature and electrostatic potential on both the lubricious behavior and interfacial layering structure of 1-ethyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide on graphene. Normal force and friction force measurements were conducted by atomic force microscopy using a sharp silicon tip. Our results reveal that the friction coefficient at the lubricated tip-graphene contacts significantly depends on surface curvature. Two friction coefficients are measured on graphene peaks and valleys with a higher coefficient measured at lower loads (pressures), whereas only one friction coefficient is measured on smooth graphene. Moreover, the electrotunability of the friction coefficient at low loads is observed to be significantly enhanced in peaks and valleys compared with smooth graphene. This is associated with the promoted overscreening of surface charge on convex interfaces and the steric hindrance at concave interfaces, which leads to more layers of ions (electrostatically) bound to the surface, i.e., thicker boundary films (electrical double layers). This work opens new avenues to control IL lubrication on the nanoscale by combining topographic features and an electric field.

Thin-Film Rheology and Tribology of Imidazolium Ionic Liquids

Ionic liquids (ILs) are organic molten salts with low-temperature melting points that hold promise as next-generation environmentally friendly boundary lubricants. This work examines the relationship between tribological and rheological behavior of thin films of five imidazolium ILs using a surface force apparatus to elucidate lubrication mechanisms. When confined to films of a few nanometers, the rheological properties change drastically as a function of the number of confined ion layers; not only the viscosity increases by several orders of magnitude but ILs can also undergo a transition from Newtonian to viscoelastic fluid and to an elastic solid. This behavior can be justified by the confinement-induced formation of supramolecular clusters with long relaxation times. The quantized friction coefficient is explained from the perspective of the strain relaxation via diffusion of these supramolecular clusters, where higher friction correlates with longer relaxation times. A deviation from this behavior is observed only for 1-ethyl-3-methylimidazolium ethylsulfate ([C2C1Im][EtSO4]), characterized by strong hydrogen bonding; this is hypothesized to restrict the reorganization of the confined IL into clusters and hinder (visco)elastic behavior, which is consistent with the smallest friction coefficient measured for this IL. We also investigate the contrasting influence of traces of water on the thin-film rheology and tribology of a hydrophobic IL, 1-ethyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate, [C2C1Im][FAP], and a hydrophilic IL, [C2C1Im][EtSO4]. [C2C1Im][EtSO4] remains Newtonian under both dry and humid conditions and provides the best lubrication, while [C2C1Im][FAP], characterized by a prominent solid-like behavior under both conditions, is a poor lubricant. The results of this study may inspire molecular designs to enable efficient IL lubrication.

Dynamically tuning friction at the graphene interface using the field effect

Dynamically controlling friction in micro- and nanoscale devices is possible using applied electrical bias between contacting surfaces, but this can also induce unwanted reactions which can affect device performance. External electric fields provide a way around this limitation by removing the need to apply bias directly between the contacting surfaces. 2D materials are promising candidates for this approach as their properties can be easily tuned by electric fields and they can be straightforwardly used as surface coatings. This work investigates the friction between single layer graphene and an atomic force microscope tip under the influence of external electric fields. While the primary effect in most systems is electrostatically controllable adhesion, graphene in contact with semiconducting tips exhibits a regime of unexpectedly enhanced and highly tunable friction. The origins of this phenomenon are discussed in the context of fundamental frictional dissipation mechanisms considering stick slip behavior, electron-phonon coupling and viscous electronic flow.

Water in the Electrical Double Layer of Ionic Liquids on Graphene

The performance of electrochemical devices using ionic liquids (ILs) as electrolytes can be impaired by water uptake. This work investigates the influence of water on the behavior of hydrophilic and hydrophobic ILs─with ethylsulfate and tris(perfluoroalkyl)trifluorophosphate or bis(trifluoromethyl sulfonyl)imide (TFSI) anions, respectively─on electrified graphene, a promising electrode material. The results show that water uptake slightly reduces the IL electrochemical stability and significantly influences graphene's potential of zero charge, which is justified by the extent of anion depletion from the surface. Experiments confirm the dominant contribution of graphene's quantum capacitance (C_Q) to the total interfacial capacitance (C_int) near the PZC, as expected from theory. Combining theory and experiments reveals that the hydrophilic IL efficiently screens surface charge and exhibits the largest double layer capacitance (C_IL ∼ 80 μF cm^-2), so that C_Q governs the charge stored. The hydrophobic ILs are less efficient in charge screening and thus exhibit a smaller capacitance (C_IL ∼ 6-9 μF cm^-2), which governs C_int already at small potentials. An increase in the total interfacial capacitance is observed at positive voltages for humid TFSI-ILs relative to dry ones, consistent with the presence of a satellite peak. Short-range surface forces reveal the change of the interfacial layering with potential and water uptake owing to reorientation of counterions, counterion binding, co-ion repulsion, and water enrichment. These results are consistent with the charge being mainly stored in a ∼2 nm-thick double layer, which implies that ILs behave as highly concentrated electrolytes. This knowledge will advance the design of IL-graphene-based electrochemical devices.

Intrinsic and Extrinsic Tunability of Double-Network Hydrogel Strength and Lubricity

Double-network (DN) hydrogels are promising materials for tissue engineering due to their biocompatibility, high strength, and toughness, but understanding of their microstructure-property relationships still remains limited. This work investigates a DN hydrogel comprising a physically crosslinked agarose, as the first network, and a chemically crosslinked copolymer with a varying ratio of acrylamide and acrylic acid, as the second network. The charge, intrinsic to most DN hydrogels, introduces a responsive behavior to chemical and electrical stimuli. The DN strengthens agarose hydrogels, but the strengthening decreases with the swelling ratio resulting from increasing acrylic acid content or reducing salt concentration. Through careful imaging by atomic force microscopy, the heterogenous surface structure and properties arising from the DN are resolved, while the lubrication mechanisms are elucidated by studying the heterogeneous frictional response to extrinsic stimuli. This method reveals the action of the first (agarose) network (forming grain boundaries), copolymer-rich and poor regions (in grains), charge and swelling in providing lubrication. Friction arises from the shear of the polymeric network, whereas hydrodynamic lift and viscoelastic deformation become more significant at higher sliding velocities. We identify the copolymer-rich phase as the main source of the stimulus-responsive behavior. Salt concentration enhances effective charge density and reduces viscoelastic deformation, while electric bias swells the gel and improves lubrication. This work also demonstrates the dynamic control of interfacial properties like hydrogel friction and adhesion, which has implications for other areas of study like soft robotics and tissue replacements.

Insight into the assembly of lipid-hyaluronan complexes in osteoarthritic conditions

Interactions between molecules in the synovial fluid and the cartilage surface may play a vital role in the formation of adsorbed films that contribute to the low friction of cartilage boundary lubrication. Osteoarthritis (OA) is the most common degenerative joint disease. Previous studies have shown that in OA-diseased joints, hyaluronan (HA) not only breaks down resulting in a much lower molecular weight (MW), but also its concentration is reduced ten times. Here, we have investigated the structural changes of lipid-HA complexes as a function of HA concentration and MW to simulate the physiologically relevant conditions that exist in healthy and diseased joints. Small angle neutron scattering and dynamic light scattering were used to determine the structure of HA-lipid vesicles in bulk solution, while a combination of atomic force microscopy and quartz crystal microbalance was applied to study their assembly on a gold surface. We infer a significant influence of both MW and HA concentrations on the structure of HA-lipid complexes in bulk and assembled on a gold surface. Our results suggest that low MW HA cannot form an amorphous layer on the gold surface, which is expected to negatively impact the mechanical integrity and longevity of the boundary layer and could contribute to the increased wear of the cartilage that has been reported in joints diseased with OA.

Velocity-weakening and -strengthening friction at single and multiasperity contacts with calcite single crystals

SignificanceThe empirical nature of rate-and-state friction (RSF) equations remains a drawback to their application to predict earthquakes. From nanoscale friction measurements on smooth and rough calcite crystals, a set of parameters is analyzed to elucidate microscopic processes dictating RSF. We infer the influence of roughness on the velocity dependence of friction in dry environment and that atomic attrition leads to stick-slip instabilities at slow velocities. In fault dynamics, stick-slip is associated with seismic slips. The aqueous environment eliminates atomic attrition and stick-slip and dissolves calcite under pressure. This yields remarkable lubrication, even more so in rough contacts, and suggests an alternative pathway for seismic slips. This work has implications for understanding mechanisms dictating fault strength and seismicity.

Rheological Characteristics of Ionic Liquids under Nanoconfinement

While the dynamic properties of ionic liquids (ILs) in nanoconfinement play a crucial role in the performance of IL-based electrochemical and mechanical devices, experimental work mostly falls short at reporting "solid-like" versus "liquid-like" behavior of confined ILs. The present work is the first to conduct frequency-sweep oscillatory-shear rheology on IL nanofilms, reconciling the solid-versus-liquid debate and revealing the importance of shear rate in the behavior. We disentangle and analyze the viscoelasticity of nanoconfined ILs and shed light on their relaxation mechanisms. Furthermore, a master curve describes the scaling of the dynamic behavior of four (non-hydrogen-bonding) ILs under nanoconfinement and reveals the role of the compressibility of the flow units.

Using Patterned Self-Assembled Monolayers to Tune Graphene-Substrate Interactions

Graphene has unique mechanical, electronic, and optical properties that make it of interest for an array of applications. These properties can be modulated by controlling the architecture of graphene and its interactions with surfaces. Self-assembled monolayers (SAMs) can tailor graphene-surface interactions; however, spatially controlling these interactions remains a challenge. Here, we blend colloidal lithography with varying SAM chemistries to create patterned architectures that modify the properties of graphene based on its chemical interactions with the substrate and to study how these interactions are spatially arrayed. The patterned systems and their resulting structural, nanomechanical, and optical properties have been characterized using atomic force microscopy, Raman and infrared spectroscopies, scattering-type scanning near-field optical microscopy, and X-ray photoelectron spectroscopy.

Effects of Layering and Supporting Substrate on Liquid Slip at the Single-Layer Graphene Interface

Understanding modulation of liquid molecule slippage along graphene surfaces is crucial for many promising applications of two-dimensional materials, such as in sensors, nanofluidic devices, and biological systems. Here, we use force measurements by atomic force microscopy (AFM) to directly measure hydrodynamic, solvation, and frictional forces along the graphene plane in seven liquids. The results show that the greater slip lengths correlate with the interfacial ordering of the liquid molecules, which suggests that the ordering of the liquid forming multiple layers promotes slip. This phenomenon appears to be more relevant than solely the wetting behavior of graphene or the solid-liquid interaction energy, as traditionally assumed. Furthermore, the slip boundary condition of the liquids along the graphene plane is sensitive to the substrate underneath graphene, indicating that the underlying substrate affects graphene's interaction with the liquid molecules. Because interfacial slip can have prominent consequences on the pressure drop, on electrical and diffusive transport through nanochannels, and on lubrication, this work can inspire innovation in many applications through the modulation of the substrate underneath graphene and of the interfacial ordering of the liquid.

Nanoscale insight into the relation between pressure solution of calcite and interfacial friction

Pressure solution of carbonate-based rocks participates in many geophysical and geochemical processes, but fundamental knowledge of the interfacial processes is still lacking. By concurrently pressing and sliding two single calcite crystals past each other, the pressure solution rate and the friction force between the crystals were concurrently measured in calcium-carbonate saturated water with an extended surface forces apparatus. These studies reveal that both a decrease and an increase in frictional strength can originate from the pressure-solution of calcite single crystals. By conducting nanoscale force measurements with an atomic force microscope, ion specific effects were unveiled at the level of a single asperity. Pressure solution is promoted when the interfacial water layers of calcite remain undisturbed under stress (e.g. with Ca(II)) and the dissolved ions and water lubricate the interface - a phenomenon called pressure-solution facilitated slip. The mechanically induced disruption of the hydration layers of the calcite surface (e.g. with Mg(II) and low Ni(II) concentration) correlates with the more fluid-like and lubricious behavior of the confined fluid in the absence of pressure solution. Charge neutralization of the calcite surface leads to an abrupt change of calcite's hydration layers, which promotes pressure-solution facilitated slip. This work advances the fundamental understanding of physicochemical interactions occurring at confined surfaces of stressed calcite.

Nanoheterogeneity of LiTFSI Solutions Transitions Close to a Surface and with Concentration

Water-in-salt (WIS) electrolytes composed of 21 m LiTFSI have recently emerged as a safe and environmentally friendly alternative to conventional organic electrolytes in Li-ion batteries. Several studies have emphasized the relation between the high conductivity of WIS electrolytes and their nanoscale structure. Combining force measurements with a surface forces apparatus and atomic force microscopy, this study describes the nanoheterogeneity of LiTFSI solutions as a function of concentration and distance from a negatively charged (mica) surface. We report various nanostructures coexisting in the WIS electrolyte, whose size increases with concentration and is influenced by the proximity of the mica surface. Two key concentration thresholds are identified, beyond which a transition of behavior is observed. The careful scrutinization on the concentration-dependent nanostructures lays groundwork for designing novel electrolytes in future energy storage devices.

Correction: Nanoscale insight into the degradation mechanisms of the cartilage articulating surface preceding OA

Correction for 'Nanoscale insight into the degradation mechanisms of the cartilage articulating surface preceding OA' by Tooba Shoaib, et al., Biomater. Sci., 2020, 8, 3944-3955, DOI: 10.1039/D0BM00496K.

Nanoscale insight into the degradation mechanisms of the cartilage articulating surface preceding OA

Osteoarthritis (OA) is a degenerative disease and leading cause of disability globally. We report the a fundamental study of the mechanisms underlying deterioration of hydrated cartilage in the presence of elevated calcium content preceding OA.

Mixing oil and water with ionic liquids: bicontinuous microemulsions under confinement

We report the structural transition of a phosphonium ionic liquid-based microemulsion from the bulk to nanoconfined between atomically flat micas. Upon the nanoconfinement, we observed a firmly surface-adsorbed ionic liquid film that stabilizes the nanoconfined microemulsion. Further confinement (<11 nm) induces rearrangements in the microemulsion culminating into two well-ordered layers with slow dynamics.

Influence of Loading Conditions and Temperature on Static Friction and Contact Aging of Hydrogels with Modulated Microstructures

Biological tribosystems enable diverse functions of the human body by maintaining extremely low coefficients of friction via hydrogel-like surface layers and a water-based lubricant. Although stiction has been proposed as a precursor to damage, there is still a lack of knowledge about its origin and its relation to the hydrogel's microstructure, which impairs the design of soft matter as replacement biomaterials. In this work, the static friction of poly(acrylamide) hydrogels with modulated composition was investigated by colloidal probe lateral force microscopy as a function of load, temperature, and loading time. Temperature-dependent studies enable to build a phase diagram for hydrogel's static friction, which explains stiction via (polymer) viscoelastic and poroelastic relaxation, and a subtle transition from solid- to liquid-like interfacial behavior. At room temperature, the static friction increases with loading time, a phenomenon called contact aging, which stems from the adhesion of the polymer to the colloid and from the drainage-induced increase in contact area. Contact aging is shown to gradually vanish with increase in temperature, but this behavior strongly depends on the hydrogel's composition. This work scrutinizes the relation between the microstructure of hydrogel-like soft matter and interfacial behavior, with implications for diverse areas of inquiry, not only in biolubrication and biomedical applications but also in soft robotics and microelectromechanical devices, where the processes occurring at the migrating hydrogel interface are of relevance. The results support that modulating both the hydrogel's mesh size and the structure of the near-surface region is a means to control static friction and adhesion. This conceptual framework for static friction will foster further understanding of the wear of hydrogel-like materials.

Influence of Water on Structure, Dynamics, and Electrostatics of Hydrophilic and Hydrophobic Ionic Liquids in Charged and Hydrophilic Confinement between Mica Surfaces

Water is ubiquitous in the environment and is the origin for operational constraints in ionic-liquid based electrolytes for supercapacitors. In this study, the influence of water on the interfacial behavior of hydrophilic (1-ethyl-3-methylimidazolium ethylsulfate, abbr. [EMIM][EtSO₄]) and hydrophobic (1-ethyl-3-methylimidazolium tris(pentafluoroethyl)trifluorophosphate and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide, abbr. [EMIM][FAP] and [EMIM][TFSI], respectively) ionic liquids (ILs) confined between mica surfaces was investigated at separations precisely modulated by a surface force apparatus and at controlled relative humidity between 0% and 50% RH. Diffusion experiments revealed that water spontaneously invades the nanoconfined ILs above a certain humidity threshold and that the confined hydrophobic IL is completely replaced by water at sufficiently high environmental humidity (∼45% here) as a result of surface-induced phase separation. This behavior is expected to be universal for other ILs that are not fully miscible with water when they are confined in hydrophilic nanopores of a few nanometers in width. The effect of environmental humidity on interfacial structure, dynamics, and electrostatics was studied via dynamic force measurements. In the dry state, several layers of ions are immobilized on the mica surface, and the effective viscosity increases by up to 2 orders of magnitude with a decrease in film thickness from ∼10 to ∼3 nm. Based on recent work, it is proposed that nanoconfinement enhances the anion-cation association in highly concentrated electrolytes, thereby justifying the loss of fluidity of the ILs. When phase separation is excluded, water is intercalated in the layered structure of the three ILs, and it leads to a change of the layer thickness compared to the dry state. Furthermore, our results reveal that interfacial water prevents ions from being immobilized on the surface and facilitates the outflow of both hydrophilic and hydrophobic ILs by reducing their effective viscosity in the order [EMIM][FAP] < [EMIM][TFSI] < [EMIM][EtSO₄]. The underlying mechanisms are evaluated by considering the roles of water in enhancing ion dissociation through screening of electrostatic interactions and solvation of the selected ILs to different extents. The discussed experimental observations support the recent discoveries made by molecular dynamic simulations and neutron scattering studies that using hydrophilic ILs coupled with water as cosolvent could lead to the enhanced power density of IL-based supercapacitors, and therefore, that water-in-(hydrophilic) ILs is a direction worth exploring as electrolytes for supercapacitors.

Slippery and Sticky Graphene in Water

Understanding modulation of water molecule slippage along graphene surfaces is crucial for many promising applications of two-dimensional materials. Here, we examine normal and shear forces on supported single-layer graphene using atomic force microscopy and find that the electrolyte composition affects the molecular slippage of nanometer thick films of aqueous electrolytes along the graphene surface. In light of the shear-assisted thermally activated theory, water molecules along the graphene plane are very mobile when subjected to shear. However, upon addition of an electrolyte, the cations can make water stick to graphene, while ion-specific and concentration effects are present. Recognizing the tribological and tribochemical utility of graphene, we also evaluate the impact of this behavior on its frictional response in the presence of water. It appears that the addition of an electrolyte to pure water causes a reduction of the thermal activation energy and of the shear-activation length at several concentrations, both results conversely affecting the friction force. Further, this work can inspire innovation in research areas where changes of the molecular slippage through the modulation of the doping characteristics of graphene in liquid environment can be of use, including molecular sensing, lubrication, and energy storage.

Effect of divalent ions and a polyphosphate on composition, structure, and stiffness of simulated drinking water biofilms

The biofilm chemical and physical properties in engineered systems play an important role in governing pathogen transmission, fouling facilities, and corroding metal surfaces. Here, we investigated how simulated drinking water biofilm chemical composition, structure, and stiffness responded to the common scale control practice of adjusting divalent ions and adding polyphosphate. Magnetomotive optical coherence elastography (MM-OCE), a tool developed for diagnosing diseased tissues, was used to determine biofilm stiffness in this study. MM-OCE, together with atomic force microscopy (AFM), revealed that the biofilms developed from a drinking water source with high divalent ions were stiffer compared to biofilms developed either from the drinking water source with low divalent ions or the water containing a scale inhibitor (a polyphosphate). The higher stiffness of biofilms developed from the water containing high divalent ions was attributed to the high content of calcium carbonate, suggested by biofilm composition examination. In addition, by examining the biofilm structure using optical coherence tomography (OCT), the highest biofilm thickness was found for biofilms developed from the water containing the polyphosphate. Compared to the stiff biofilms developed from the water containing high divalent ions, the soft and thick biofilms developed from the water containing polyphosphate will be expected to have higher detachment under drinking water flow. This study suggested that water chemistry could be used to predict the biofilm properties and subsequently design the microbial safety control strategies.

A variety of analytical techniques are revealing the complex influences of ions in drinking water supplies on the structure of biofilms. Such biofilms often contaminate water supply pipes and machinery. Yun Shen and colleagues at the University of Illinois at Urbana-Champaign in the USA investigated the effects of ions with a double positive charge – ‘divalent cations’ – and polyphosphate ions. Divalent cations, especially calcium and magnesium ions, are abundant in drinking water in many regions, promoting the formation of limescale deposits. Polyphosphates are commonly added to water supplies to reduce limescale formation, inhibit corrosion and discourage biofilm formation. The research revealed that divalent cations increase biofilm stiffness, while polyphosphates promote softer but thicker biofilms that are more easily removed. The results will help optimize water treatment procedures to control both microbial contamination and limescale problems.

The role of water in fault lubrication

The friction between two adjacent tectonic plates under shear loading may dictate seismic activities. To advance the understanding of mechanisms underlying fault strength, we investigate the frictional characteristics of calcite in an aqueous environment. By conducting single-asperity friction experiments using an atomic force microscope, here we show three pathways of energy dissipation with increasing contact stresses: viscous shear of a lubricious solution film at low normal stresses; shear-promoted thermally activated slip, similar to dry friction but influenced by the hydrated ions localized at the interface; and pressure-solution facilitated slip at sufficiently high stresses and slow sliding velocities, which leads to a prominent decrease in friction. It is also shown that the composition of the aqueous solution affects the frictional response. We use this nanoscale evidence to scrutinize the role of brines on fault behavior and argue that pressure solution provides a weakening mechanism of the fault strength at the level of single-asperity contacts.

Stick-Slip Friction Reveals Hydrogel Lubrication Mechanisms

The lubrication behavior of the hydrated biopolymers that constitute tissues in organisms differs from that outlined by the classical Stribeck curve, and studying hydrogel lubrication is a key pathway to understand the complexity of biolubrication. Here, we have investigated the frictional characteristics of polyacrylamide (PAAm) hydrogels with various acrylamide concentrations, exhibiting Young's moduli (E) that range from 1 to 40 kPa, as a function of applied normal load and sliding velocities by colloid probe lateral force microscopy. The speed-dependence of the friction force shows an initial decrease in friction with increasing velocity, while, above a transition velocity V*, friction increases with speed. This study reveals two different boundary lubrication mechanisms characterized by distinct scaling laws. An unprecedented and comprehensive study of the lateral force loops reveals intermittent friction or stick-slip above and below V*, with characteristics that depend on the hydrogel network, applied load, and sliding velocity. Our work thus provides insight into the closely tied parameters governing hydrogel lubrication mechanisms, and stick-slip friction.

Calcium carbonate with nanogranular microstructure yields enhanced toughness

The presence of nanogranular microstructures is a widely reported feature of biominerals that form by classical and non-classical mineralization pathways. Inspired by nature, we have synthesized amorphous calcium carbonate nanoparticles with nanogranular microstructures, whose grain size is tuned by varying the polymer concentration. The response to indentation of single calcium carbonate nanoparticles proceeds via an intermittent stick-slip that reflects the characteristics of the nanogranular microstructure. A two-fold mechanism is thus proposed to enhance the toughness of the nanoparticles, namely nanogranular rearrangement and intergranular bridging by an organic phase and/or hydration. This work not only provides a synthesis route to design biologically inspired mineral nanoparticles with nanogranular structure, but also helps in understanding toughening mechanisms of biominerals arising from their nanoscale heterogeneity.

Reconciling DLVO and non-DLVO Forces and Their Implications for Ion Rejection by a Polyamide Membrane

Recognizing the significance of surface interactions for ion rejection and membrane fouling in nanofiltration, we revise the theories of DLVO (named after Derjaguin, Landau, Verwey, and Overbeek) and non-DLVO forces in the context of polyamide active layers. Using an atomic force microscope, surface forces between polyamide active layers and a micrometer-large and smooth silica colloid were measured in electrolyte solutions of representative monovalent and divalent ions. While the analysis of DLVO forces, accounting for surface roughness, provides how surface charge of the active layer changes with electrolyte concentration, scrutiny of non-DLVO hydration forces gives molecular insight into the composition of the membrane-solution interface. Importantly, we report an expansion of the diffuse layer at high ionic strength, consistent with the recent development of the electrical double layer theory, but in contrast to the widely accepted phenomenon of aggregation in the secondary minimum. Further, the enhanced repulsion acting on modified membranes via polyelectrolyte adsorption can be quantitatively predicted by DLVO and non-DLVO forces. This work serves to solve past misunderstandings about the interaction forces acting on nanofiltration membranes, and it provides guidance for future work on the relation between surface properties and rejection mechanisms and fouling.

Strong Stretching of Poly(ethylene glycol) Brushes Mediated by Ionic Liquid Solvation

We have measured forces between mica surfaces coated with a poly(ethylene glycol) (PEG) brush solvated by a vacuum-dry ionic liquid, 1-ethyl-3-methyl imidazolium bis(trifluoromethylsulfonyl)imide, with a surface forces apparatus. At high grafting density, the solvation mediated by the ionic liquid causes the brush to stretch twice as much as in water. Modeling of the steric repulsion indicates that PEG behaves as a polyelectrolyte; the hydrogen bonding between ethylene glycol and the imidazolium cation seems to effectively charge the polymer brush, which justifies the strong stretching. Importantly, under strong polymer compression, solvation layers are squeezed out at a higher rate than for the neat ionic liquid. We propose that the thermal fluctuations of the PEG chains, larger in the brush than in the mushroom configuration, maintain the fluidity of the ionic liquid under strong compression, in contrast to the solid-like squeezing-out behavior of the neat ionic liquid. This is the first experimental study of the behavior of a polymer brush solvated by an ionic liquid under nanoconfinement.

Self-adaptive hydrogels to mineralization

Mineralized biological tissues, whose behavior can range from rigid to compliant, are an essential component of vertebrates and invertebrates. Little is known about how the behavior of mineralized yet compliant tissues can be tuned by the degree of mineralization. In this work, a synthesis route to tune the structure and mechanical response of agarose gels via ionic crosslinking and mineralization has been developed. A combination of experimental techniques demonstrates that crosslinking via cooperative hydrogen bonding in agarose gels is disturbed by calcium ions, but they promote ionic crosslinking that modifies the agarose network. Further, it is shown that the rearrangement of the hydrogel network helps to accommodate precipitated minerals into the network -in other words, the hydrogel self-adapts to the precipitated mineral- while maintaining the viscoelastic behavior of the hydrogel, despite the reinforcement caused by mineralization. This work not only provides a synthesis route to design biologically inspired soft composites, but also helps to understand the change of properties that biomineralization can cause to biological tissues, organisms and biofilms.

Influence of Chain Stiffness, Grafting Density and Normal Load on the Tribological and Structural Behavior of Polymer Brushes: A Nonequilibrium-Molecular-Dynamics Study

We have performed coarse-grained molecular-dynamics simulations on both flexible and semiflexible multi-bead-spring model polymer brushes in the presence of explicit solvent particles, to explore their tribological and structural behaviors. The effect of stiffness and tethering density on equilibrium-brush height is seen to be well reproduced within a Flory-type theory. After discussing the equilibrium behavior of the model brushes, we first study the shearing behavior of flexible chains at different grafting densities covering brush and mushroom regimes. Next, we focus on the effect of chain stiffness on the tribological behavior of polymer brushes. The tribological properties are interpreted by means of the simultaneously recorded density profiles. We find that the friction coefficient decreases with increasing persistence length, both in velocity and separation-dependency studies, over the stiffness range explored in this work.

Layering of ionic liquids on rough surfaces

Understanding the behavior of ionic liquids (ILs) either confined between rough surfaces or in rough nanoscale pores is of great relevance to extend studies performed on ideally flat surfaces to real applications. In this work we have performed an extensive investigation of the structural forces between two surfaces with well-defined roughness (<9 nm RMS) in 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide by atomic force microscopy. Statistical studies of the measured layer thicknesses, layering force, and layering frequency reveal the ordered structure of the rough IL-solid interface. Our work shows that the equilibrium structure of the interfacial IL strongly depends on the topography of the contact.

Influence of Environmental Humidity on the Wear and Friction of a Silica/Silicon Tribopair Lubricated with a Hydrophilic Ionic Liquid

In this study, the tribological behavior of silica/silicon surfaces lubricated with the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate ([EMIM] EtSO4) was investigated. Tests were carried out in the presence of either humid air (45-55% relative humidity) or in a nitrogen atmosphere, and the results were compared with those obtained using pure water as a lubricant. The cross-sectional analysis of the contact area performed by focused-ion-beam scanning electron microscopy indicated the presence of cracks in the subsurface region, showing that brittle fracture contributed to wear. Sliding promoted the formation of a third body, the presence of which was indicated by optical and secondary electron microscopy. X-ray photoelectron spectroscopy showed that the third body was mostly composed of silicon oxides. The accumulation of the debris was controlled by the presence of water: in the presence of a nitrogen atmosphere, particles were trapped between the sliding surfaces, whereas in the case of humid air, the debris was progressively removed from the contact. Notably, the presence of trapped particles was associated with higher values of wear coefficients of both disks and pins. In addition, a lower roughness was observed along the direction of sliding in the case of water-containing ionic liquid. The observed trends in wear and the combined results of the various techniques, as well as the comparison with tests carried out in the presence of pure water, all point to the characteristic tribochemical reactions of water with silicon-based materials, namely, the formation of a sacrificial layer of hydrated oxide and the dissociative adsorption of water at crack tips of SiO2. In the absence of water, the lack of a tribochemical mechanism forming a sacrificial layer leads to a microfracture-dominated wear mechanism over the entire duration of the test, thus leading to more severe wear. The possible occurrence of stress-induced phase transformation of silicon during sliding is also discussed.

Effect of the environmental humidity on the bulk, interfacial and nanoconfined properties of an ionic liquid

Structural and dynamical properties of ILs are altered by the weakening of ion–ion correlations in the presence of water.

Ab Initio Studies of Calcium Carbonate Hydration

Ab initio simulations of large hydrated calcium carbonate clusters are challenging due to the existence of multiple local energy minima. Extensive conformational searches around hydrated calcium carbonate clusters (CaCO3·nH2O for n = 1-18) were performed to find low-energy hydration structures using an efficient combination of Monte Carlo searches, density-functional tight binding (DFTB+) method, and density-functional theory (DFT) at the B3LYP level, or Møller-Plesset perturbation theory at the MP2 level. This multilevel optimization yields several low-energy structures for hydrated calcium carbonate. Structural and energetics analysis of the hydration of these clusters revealed a first hydration shell composed of 12 water molecules. Bond-length and charge densities were also determined for different cluster sizes. The solvation of calcium carbonate in bulk water was investigated by placing the explicitly solvated CaCO3·nH2O clusters in a polarizable continuum model (PCM). The findings of this study provide new insights into the energetics and structure of hydrated calcium carbonate and contribute to the understanding of mechanisms where calcium carbonate formation or dissolution is of relevance.

Irreversible structural change of a dry ionic liquid under nanoconfinement

Studies of 1-hexyl-3-methyl-imidazolium ethylsulfate ([HMIM] EtSO4) using an extended surface forces apparatus show, for the first time, an ordered structure within the nanoconfined ionic liquid (IL) between mica surfaces that extends up to ∼60 nm from the surface. Our measurements show the growth of this ordered IL-film upon successive nanoconfinements-the structural changes being irreversible upon removal of the confinement-and the response of the structure to shear. The compressibility of this system is lower than that typically measured for ILs, while creep takes place during shear, both findings supporting a long-range liquid-to-solid transition. AFM (sharp-tip) studies of [HMIM] EtSO4 on mica only reveal ∼2 surface IL-layers, with order extending only ∼3 nm from the surface, indicating that confinement is required for the long-range IL-solidification to occur. WAXS studies of the bulk IL show a more pronounced ordered structure than is the case for [HMIM] with bis(trifluoromethylsulfonyl)imide as anion, but no long-range order is detected, consistent with the results obtained with the sharp AFM tip. These are the first force measurements of nanoconfinement-induced long-range solidification of an IL.

Polymer Brushes under Shear: Molecular Dynamics Simulations Compared to Experiments

Surfaces coated with polymer brushes in a good solvent are known to exhibit excellent tribological properties. We have performed coarse-grained equilibrium and nonequilibrium molecular dynamics (MD) simulations to investigate dextran polymer brushes in an aqueous environment in molecular detail. In a first step, we determined simulation parameters and units by matching experimental results for a single dextran chain. Analyzing this model when applied to a multichain system, density profiles of end-tethered polymer brushes obtained from equilibrium MD simulations compare very well with expectations based on self-consistent field theory. Simulation results were further validated against and correlated with available experimental results. The simulated compression curves (normal force as a function of surface separation) compare successfully with results obtained with a surface forces apparatus. Shear stress (friction) obtained via nonequilibrium MD is contrasted with nanoscale friction studies employing colloidal-probe lateral force microscopy. We find good agreement in the hydrodynamic regime and explain the observed leveling-off of the friction forces in the boundary regime by means of an effective polymer-wall attraction.

Sugars communicate through water: oriented glycans induce water structuring

Cells are coated with a glycocalyx-a layer of carbohydrate-containing biomolecules, such as glycoproteins. Although the structure and orientation of the cell-surface glycans are frequently regarded as being random, we have found, using α-1-acid glycoprotein and antitrypsin as model systems for surface glycans, that this is not the case. A glycoprotein monolayer was adsorbed onto hydrophilic and hydrophobic substrates. Surface-force measurements revealed that the orientation of the glycans with respect to the aqueous solution has a profound effect on the structure of vicinal water. The glycan antennae of the surface-adsorbed glycoproteins apparently impose an ordering on the water, resulting in a strong repulsive force over some tens of nanometers with superposed film-thickness transitions ranging from ≈0.7 to 1.8 nm. When the glycan orientation is modified by chemical means, this long-range repulsion disappears. These results may provide an explanation as to why the multiantennary structure is ubiquitous in glycoproteins. Although direct, specific interactions between glycans and other biomolecules are essential for their functionality, these results indicate that glycans' long-range structuring of water may also influence their ability to interact with biomolecules in their vicinity.

Microslips to "Avalanches" in Confined, Molecular Layers of Ionic Liquids

We have measured forces between mica surfaces across two hydrophobic ionic liquids with a surface forces apparatus. Both surface-adsorbed water and alkyl-chain length on the imidazolium cation influence the structure of the nanoconfined film and the dynamics of film-thickness transitions. Friction shows accumulative microslips as precursors to collective "avalanches" that abruptly reduce friction momentarily. This behavior is interpreted as a consequence of interlayer ion correlations within the 1 to 2 nm thick film; we identify this to be analogous to the friction response of crackling noise systems over a broad range of sizes.

Adhesion and friction properties of polymer brushes on rough surfaces: a gradient approach

The effect of nanoscale surface roughness on the lubrication properties of a polymer brush in a good solvent has been investigated. Friction and adhesion forces were measured by means of polyethylene colloidal-probe AFM across a 12 nm silica particle gradient before and after the adsorption of a poly(L-lysine)-g-poly(ethylene glycol) (PLL-g-PEG) polymer brush. The adsorption and conformation of the polymer chains were studied with multiple transmission and reflection infrared (MTR-IR) spectroscopy. The results show that prior to the adsorption of PLL-g-PEG on the gradient surface, the friction is high at the smooth end of the gradient while it decreases toward the rough end. Moreover, there is a direct correlation between friction and adhesion. Upon adsorption of the brushes, adhesion vanishes. In this case, a higher frictional force between the PEG-coated particle gradient substrate and the polyethylene sphere is observed at the rough end of the gradient in comparison to the smooth end. In spite of the increased adsorbed mass of PLL-g-PEG at the rough end of the gradient, theory and simulations show that the high curvature of the nanoparticles leads to a less swollen PEG brush in comparison to PEG brushes adsorbed on a planar surface, resulting in a lower repulsion, which can explain the observed increase in friction with particle density.

Exploring lubrication regimes at the nanoscale: nanotribological characterization of silica and polymer brushes in viscous solvents

Nanotribological properties of silica surfaces, with and without adsorbed, brushlike copolymers of poly(L-lysine)-graft-poly(ethylene glycol) (PLL-g-PEG) and poly(L-lysine)-graft-dextran (PLL-g-dextran) have been investigated in aqueous viscous solvent mixtures by means of colloid-probe lateral force microscopy. Lateral forces for PEG/dextran brushes have been measured as a function of shear velocity in aqueous mixtures of glycerol and ethylene glycol (EG), which are highly miscible with water, but are poor solvents for hydrophilic PEG and dextran chains. Prior to the friction measurements on polymer brushes, a nanoscale Stribeck curve was obtained on a bare silica surface in the selected aqueous cosolvent mixtures. The Stribeck curve for bare surfaces indicates the existence of a surface-solvating thin film due to the adsorption of hydrated ions, preventing direct silica-silica contact in the boundary-lubrication regime. A clear transition to the hydrodynamic regime is seen at high speeds for solvents with higher viscosities. The polymer brushes, however, show a shear-thinning effect with increasing shear speed and a combined influence of polymer film and solvent viscosity on the measured friction forces. The formation of an interfacial fluid-film is shown to shift the hydrodynamic regime of hydrated brushes to a lower value of Uη. The correlation between the structural configuration and the corresponding frictional properties of the polymer brushes upon changing solvent quality is discussed.

Advances in understanding damage by salt crystallization

The single most important cause of the deterioration of monuments in the Mediterranean basin, and elsewhere around the world, is the crystallization of salt within the pores of the stone. Considerable advances have been made in recent years in elucidating the fundamental mechanisms responsible for salt damage. As a result, new methods of treatment are being proposed that offer the possibility of attacking the cause of the problem, rather than simply treating the symptoms. In this Account, we review the thermodynamics and kinetics of crystallization, then examine how a range of technological innovations have been applied experimentally to further the current understanding of in-pore crystallization. We close with a discussion of how computer modeling now provides particularly valuable insight, including quantitative estimates of both the interaction forces between the mineral and the crystal and the stresses induced in the material. Analyzing the kinetics and thermodynamics of crystal growth within the pores of a stone requires sensitive tools used in combination. For example, calorimetry quantifies the amount of salt that precipitates in the pores of a stone during cooling, and dilatometric measurements on a companion sample reveal the stress exerted by the salt. Synchrotron X-rays can penetrate the stone and identify the metastable phases that often appear in the first stages of crystallization. Atomic force microscopy and environmental scanning electron microscopy permit study of the nanometric liquid film that typically lies between salt and stone; this film controls the magnitude of the pressure exerted and the kinetics of relaxation of the stress. These experimental advances provide validation for increasingly advanced simulations, using continuum models of reactive transport on a macroscopic scale and molecular dynamics on the atomic scale. Because of the fundamental understanding of the damage mechanisms that is beginning to emerge, it is possible to devise methods for protecting monuments and sculptures. For example, chemical modification of the stone can alter the repulsive forces that stabilize the liquid film between the salt and mineral surfaces, thereby reducing the stress that the salt can generate. Alternatively, molecules can be introduced into the pores of the stone that inhibit the nucleation or growth of salt crystals. Many challenges remain, however, particularly in understanding the complex interactions between salts, the role of metastable phases, the mechanism of crack initiation and growth, and the role of biofilms.