Dye-Sensitized Downconversion

AIEgen-sensitized lanthanide nanocrystals as luminescent probes for intracellular Fe3+ monitoring

The abnormal Fe³⁺ level is known to cause various diseases, such as heart failure, liver damage and neurodegeneration. In situ probing Fe³⁺ in living cells or organisms is highly desired for both biological research and medical diagnostics. Herein, hybrid nanocomposites NaEuF₄@TCPP were constructed by the assembly of an aggregation-induced emission luminogen (AIEgen) TCPP and NaEuF₄ nanocrystals (NCs). The anchored TCPP on the surface of NaEuF₄ NCs can reduce rotational relaxation of the excited state and efficiently transfer the energy to the Eu³⁺ ions with minimized nonradiative energy loss. Consequently, the prepared NaEuF₄@TCPP nanoparticles (NPs) exhibited an intense red emission with a 103-fold enhancement relative to that in NaEuF₄ NCs under 365 nm excitation. A selectively quenching response to Fe³⁺ ions for the NaEuF₄@TCPP NPs makes them luminescent probes for sensitive detection of Fe³⁺ ions with a low detection limit of 340 nM. Moreover, the luminescence of NaEuF₄@TCPP NPs could be recovered by the addition of iron chelators. Benefiting from their good biocompatibility and stability in living cells, together with the characteristic of the reversible luminescence response, the lipo-coated NaEuF₄@TCPP probes were successfully applied for real-time monitoring of Fe³⁺ ions in living HeLa cells. These results are expected to motivate the exploration of AIE-based lanthanide probes for sensing and biomedical applications.

Activatable Lanthanide Nanoprobes with Dye-Sensitized Second Near-Infrared Luminescence for in Vivo Inflammation Imaging

Lanthanide nanoparticles exhibit unique photophysical properties and thus emerge as promising second near-infrared (NIR-II) optical agents. However, the limited luminescence brightness hampers their construction of activatable NIR-II probes. Herein, we report the synthesis of dye-sensitized lanthanide nanoprobes (NaGdF₄:Nd/ICG; indocyanine green (ICG)) and their further development for in vivo activatable imaging of hypochlorite (ClO^-). Dye sensitization using ICG not only shifts the optimal doping concentration of Nd³⁺ from 5 to 20 mol % but also leads to a 5-fold NIR-II enhancement relative to the ICG-free counterpart. Mechanistic studies reveal that such a luminescence enhancement of NaGdF₄:Nd at high Nd³⁺ concentration is ascribed to an alleviated cross-relaxation effect due to the broad absorption of ICG and faster energy transfer process. Taking advantage of dye oxidation, the nanoprobes enable activatable NIR-II imaging of hypochlorous acid (ClO^-) in a drug-induced lymphatic inflammation mouse model. This work thus provides a simple, yet effective luminescence enhancement strategy for constructing lanthanide nanoprobes at higher activator doping concentration toward activatable NIR-II molecular imaging.

Distributive Nd-to-Yb Energy Transfer within Pure [YbNdYb] Heterometallic Molecules

Facile access to site-selective hetero-lanthanide molecules will open new avenues in the search of novel photophysical phenomena based on Ln-to-Ln' energy transfer (ET). This challenge demands strategies to segregate efficiently different Ln metal ions among different positions in a molecule. We report here the one-step synthesis and structure of a pure [YbNdYb] (1) coordination complex featuring short Yb···Nd distances, ideal to investigate a potential distributive (i.e., from one donor to two acceptors) intramolecular ET from one Nd³⁺ ion to two Yb³⁺ centers within a well-characterized molecule. The difference in ionic radius is the mechanism allowing to allocate selectively both types of metal ion within the molecular structure, exploited with the simultaneous use of two β-diketone-type ligands. To assist the photophysical investigation of this heterometallic species, the analogues [YbLaYb] (2) and [LuNdLu] (3) have also been prepared. Sensitization of Yb³⁺ and Nd³⁺ in the last two complexes, respectively, was observed, with remarkably long decay times, facilitating the determination of the Nd-to-Yb ET within the [YbNdYb] composite. This ET was demonstrated by comparing the emission of iso-absorbant solutions of 1, 2, and 3 and through lifetime determinations in solution and solid state. The comparatively high efficiency of this process corroborates the facilitating effect of having two acceptors for the nonradiative decay of Nd³⁺ created within the [YbNdYb] molecule.

Dye-sensitized lanthanide containing nanoparticles for luminescence based applications

Due to their exceptional luminescent properties, lanthanide (Ln) complexes represent a unique palette of probes in the spectroscopic toolkit. Their extremely weak brightness due to forbidden Ln electronic transitions can be overcome by indirect dye-sensitization from the antenna effect brought by organic ligands. Despite the improvement brought by the antenna effect, (bio)analytical applications with discrete Ln complexes as luminescent markers still suffers from low sensitivity as they are limited by the complex brightness. Thus, there is a need to develop nano-objects that cumulate the spectroscopic properties of multiple Ln ions. This review firstly gives a brief introduction of the spectral properties of lanthanides both in complexes and in nanoparticles (NPs). Then, the research progress of the design of Ln-doped inorganic NPs with capping antennas, Ln-complex encapsulated NPs and Ln-complex surface functionalized NPs is presented along with a summary of the various photosensitizing ligands and of the spectroscopic properties (excited-state lifetime, brightness, quantum yield). The review also emphasizes the problems and limitations encountered over the years and the solutions provided to address them. Finally, a comparison of the advantages and drawbacks of the three types of NP is provided as well as a conclusion about the remaining challenges both in the design of brighter NPs and in the luminescence based applications.

Rare-Earth Doping in Nanostructured Inorganic Materials

Impurity doping is a promising method to impart new properties to various materials. Due to their unique optical, magnetic, and electrical properties, rare-earth ions have been extensively explored as active dopants in inorganic crystal lattices since the 18th century. Rare-earth doping can alter the crystallographic phase, morphology, and size, leading to tunable optical responses of doped nanomaterials. Moreover, rare-earth doping can control the ultimate electronic and catalytic performance of doped nanomaterials in a tunable and scalable manner, enabling significant improvements in energy harvesting and conversion. A better understanding of the critical role of rare-earth doping is a prerequisite for the development of an extensive repertoire of functional nanomaterials for practical applications. In this review, we highlight recent advances in rare-earth doping in inorganic nanomaterials and the associated applications in many fields. This review covers the key criteria for rare-earth doping, including basic electronic structures, lattice environments, and doping strategies, as well as fundamental design principles that enhance the electrical, optical, catalytic, and magnetic properties of the material. We also discuss future research directions and challenges in controlling rare-earth doping for new applications.

Luminescent detection of pesticides by color changeable flexible coumarin-3-carboxylic acid/GdF3:Sm3+ composite film

The utilization and residue of pesticides exist multifaceted non-restrictive effects on food safety and ecological protection. Exploitation of rapid and sensitive pesticide detection technology is imperative and will be helpful to better control the detriment of pesticides. Here, a novel flexible film has been prepared based on organic-inorganic composite materials (coumarin-3-carboxylic acid and GdF₃:Sm³⁺), which exhibits good optical performance and can well realize the timely and maneuverable detection for different pesticides. The spectra and luminescence properties of each composition in the composite have been analyzed systematically, and the coordinated fluorescence emission of Sm³⁺ and coumarin-3-carboxylic acid is revealed at an excitation wavelength of 373 nm. Besides, the energy transfer mechanism is also researched by both experiment and theoretical calculation. The actual detection of different pesticides reveals differential fluorescence influence degree. Meanwhile, the flexible film still possesses sensitive recognition in the presence of micro concentration of pesticides. Results indicate that the flexible film with good optical performance can produce visual detection ability and provide a promising strategy for wider detection applications.

Rapid and accurate detection of phosphate in complex biological fluids based on highly improved antenna sensitization of lanthanide luminescence

Rapid and accurate detection of phosphate (Pi) in complex biological fluid is of critical importance for timely warning of Pi accumulation and monitoring Pi related pathological process. Up to date, various luminescent probes have been developed for Pi determination in aqueous media. However, the huge obstacles of the current probes suffer from the inherent issues such as time-consuming, tedious preparation and unavoidable background interference during Pi detection. To circumvent this limitation, we proposed a universal and facile strategy to fabricate a novel sensitizer-Ln³⁺@surfactant micelle probe with time-resolved luminescent (TRL) superiority through the self-assembly of sensitizer, Ln³⁺ and surfactant. Through this design, the sensitizer-Ln³⁺ chelate can be encapsulated into the surfactant constructed micelle and Ln³⁺ luminescence can be substantially lighted up through the effective energy transfer from the coordinated sensitizer and the assistance of Triton X-100. Such high TRL signal can be sensitively and specifically quenched by Pi, which was attributed to the specific coordination competition between sensitizer and Pi towards Ln³⁺. Benefitting from the background-free interference and highly sensitive TRL response of the sensitizer-Ln³⁺@surfactant probe, we achieved the rapid, selective and sensitive detection of Pi in the range of 0.5-120 μM with a limit of detection (LOD) of 0.19 μM. Furthermore, the accuracy of the proposed method based on the Ln³⁺ involved micelle probes was further verified through the quantitation of Pi in real biological samples.

A Bayesian approach to luminescent down-conversion

Photon conversion embodies a range of promising possibilities in pushing the theoretical Shockley-Queisser efficiency model of classical solar cells. Luminescent down-conversion, despite its potential, is held back in practical applications due to the difficulty of proper characterization in no small part because of concurrent luminescent downshifting events. Recent advances have demonstrated the opportunity provided by photon correlation measurement for down-conversion characterization. In this methodological work, we present a general method based on Bayesian probabilities for deriving auto-correlation functions analytically. This method is then applied to the five down-conversion mechanisms reported in the literature and successfully tested against numerical simulations. We show that the zero delay auto-correlation function can be the most direct way to demonstrate down-conversion and assess its efficiency. Our analysis offers additional useful tools for the design of characterization experiments and emphasizes some universal behavior valid for all reported conversion mechanisms.

Temperature dependent quantum cutting in cubic BaGdF5:Eu3+ nanophosphors

A task-specific ionic liquid (IL) is employed as a structure directing agent for the synthesis of quantum cutting BaGdF₅:Eu³⁺ nanophosphors.

Infrared Photon Pair-Production in Ligand-Sensitized Lanthanide Nanocrystals

This report details spectroscopic characterizations of rare-earth, core-shell nanoparticles decorated with the f-element chelator 3,4,3-LI(1,2-HOPO). Evidence of photon downconversion is corroborated through detailed power dependence measurements, which suggest two-photon decay paths are active in these materials, albeit only representing a minority contribution of the sum luminescence, with emission being dominated by normal, Stokes' shifted fluorescence. Specifically, ultraviolet ligand photosensitization of Nd³⁺ ions in a NaGdF₄ host shell results in energy transfer to a Nd³⁺/Yb³⁺-doped NaGdF₄ nanoparticle core. The population and subsequent decay of core, Yb³⁺²F_5/2 states result in a spectral shift of 620 nm, manifested in a NIR emission displaying luminescence profiles diagnostic of Yb³⁺ and Nd³⁺ excited state decays. Emphasis is placed on the generality of this material architecture for realizing ligand-pumped, multi-photon downconversion, with the Nd³⁺/Yb³⁺ system presented here functioning as a working prototype for a design principle that may be readily extended to other lanthanide pairs.

Anion Exchange and the Quantum-Cutting Energy Threshold in Ytterbium-Doped CsPb(Cl1- xBr x)3 Perovskite Nanocrystals

Colloidal halide perovskite nanocrystals of CsPbCl₃ doped with Yb³⁺ have demonstrated remarkably high sensitized photoluminescence quantum yields (PLQYs), approaching 200%, attributed to a picosecond quantum-cutting process in which one photon absorbed by the nanocrystal generates two photons emitted by the Yb³⁺ dopants. This quantum-cutting process is thought to involve a charge-neutral defect cluster within the nanocrystal's internal volume. We demonstrate that Yb³⁺-doped CsPbCl₃ nanocrystals can be converted postsynthetically to Yb³⁺-doped CsPb(Cl_{1- x}Br _x)₃ nanocrystals without compromising the desired high PLQYs. Nanocrystal energy gaps can be tuned continuously from E_g ≈ 3.06 eV (405 nm) in CsPbCl₃ down to E_g ≈ 2.53 eV (∼490 nm) in CsPb(Cl_0.25Br_0.75)₃ while retaining a constant PLQY above 100%. Reducing E_g further causes a rapid drop in PLQY, interpreted as reflecting an energy threshold for quantum cutting at approximately twice the energy of the Yb³⁺²F_7/2 → ²F_5/2 absorption threshold. These data demonstrate that very high quantum-cutting energy efficiencies can be achieved in Yb³⁺-doped CsPb(Cl_{1- x}Br _x)₃ nanocrystals, offering the possibility to circumvent thermalization losses in conventional solar technologies. The presence of water during anion exchange is found to have a deleterious effect on the Yb³⁺ PLQYs but does not affect the nanocrystal shapes or morphologies, or even reduce the excitonic PLQYs of analogous undoped CsPb(Cl_{1- x}Br _x)₃ nanocrystals. These results provide valuable information relevant to the development and application of these unique materials for spectral-shifting solar energy conversion technologies.

Efficient Visible-to-NIR Spectral Conversion for Polycrystalline Si Solar Cells and Revisiting the Energy Transfer Mechanism from Ce3+ to Yb3+ in Lu3Al5O12 Host

The so-called Shockley-Queisser converting efficiency limit of Si solar cells is believed to be surpassed by using the spectral converter. However, searching for efficient spectral converting materials is still a challenging task. In this paper, efficient visible-to-NIR spectral conversion for polycrystalline Si solar cells has been demonstrated in Ce³⁺ and Yb³⁺ codoped Lu₃Al₅O₁₂. Moreover, the underlying energy transfermechanism from Ce³⁺ to Yb³⁺ is systematically re-investigated by the detailed excitation and emission spectra as well as fluorescent decay curves, and our results demonstrate that fast metal-to-metal charge transfer from Ce³⁺ to nearby Yb³⁺ is the dominant energy transfermechanism. Finally, we provide new evidence that Ce⁴⁺-Yb²⁺ charge-transfer state is responsible for the relatively low quantum efficiency of NIR emission in Ce³⁺ and Yb³⁺ codoped system.

Ultrastrong Absorption Meets Ultraweak Absorption: Unraveling the Energy-Dissipative Routes for Dye-Sensitized Upconversion Luminescence

Dye sensitization is becoming a new dimension to highly improve the upconversion luminescence (UCL) of lanthanide-doped upconversion nanoparticles (UCNPs). However, there is still a lack of general understanding of the dye-UCNPs interactions, especially the confused large mismatch between the inputs and outputs. By taking dye-sensitized NaYF₄:Yb/Er@NaYF₄:Nd UCNPs as a model system, we not only revealed the in-depth energy-dissipative process for dye-sensitized UCL but also confirmed the first ever experimental observation of the energy back transfer (EBT) in the dye-sensitized UCL. Furthermore, this energy-dissipative EBT restricted the optimal ratio of dyes to UCNP. By unearthing all of the energy loss behind the EBT, energy transfer, and energy migration processes, this paper sheds light on the further design of effective dye-sensitized nanosystems for UCL or even downconversion luminescence.

Dramatic Enhancement of Quantum Cutting in Lanthanide-Doped Nanocrystals Photosensitized with an Aggregation-Induced Enhanced Emission Dye

Applications of multiphoton processes in lanthanide-doped nanophosphors (NPs) are often limited by relatively weak and narrow absorbance. Here, the concept of an ultimate photosensitization by aggregation-induced enhanced emission (AIEE) dyes to overcome this limitation is introduced. Because AIEE dyes do not suffer from concentration quenching, they can fully cover the NP surface at high density to maximize absorbance while passivating the surface. This concept is applied to multiphoton down-conversion by quantum cutting. Specifically, coating Yb³⁺/Tb³⁺-doped NPs with an AIEE dye designed for efficient energy transfer and attachment to the NPs produces a 2260-fold enhancement of multiphoton down-conversion by quantum cutting with remarkable photostability. In a prototypical application, the quantum cutting of UV photons to near-infrared photons that are matched to the band gap of a silicon solar cell produces an average 4% increase in efficiency under concentrated solar illumination. This provides a general strategy for NP photosensitization that can be applied to both multiphoton up- and down-conversion.