Stainless steel electrochemical capacitive microneedle sensors for multiplexed simultaneous measurement of pH, nitrates, and phosphates

Concerns for agri-food safety and environmental management require development of simple to use and cost- and time-effective multiplex sensors for point-of-need (PON) chemical analytics by public end-user. Simultaneous detection of nitrates, phosphates, and pH is of importance in soil and water analysis, agriculture, and food quality assessment. This article demonstrates a suite of stainless steel microneedle electrochemical sensors for multiplexed measurement of pH, nitrate, and phosphate using faradaic capacitance derived from cyclic voltammetry as the mode of detection. The multi-target microneedle sensors were fabricated by layer-by-layer (LbL) assembly in a stainless steel hypodermic microneedle substrate. For nitrate sensing, the stainless steel was coated with carbon nanotube/cellulose nanocrystal (CNT)/CNC) decorated with silver nanoparticles (Ag). For pH measurement, the polyaniline (pANI) was coated onto the CNT/CNC@Ag film, while for phosphate detection, the CNT/CNC/Ag @pANI microneedle was further decorated with ammonium molybdenum tetrahydrate (AMT). The microelectrode platforms were characterized by FTIR, Raman, and microscopic techniques. The nitrate- and phosphate-based microneedle electrochemical sensors had excellent selectivity and sensitivity, with a determined limit of detection (LOD) of 0.008 mM and 0.007 mM, respectively. The pH microneedle sensor was responsive to pH in the linear range of 3-10. The three microneedle sensors yielded repeatable results, with a precision ranging from 4.0 to 7.5% RSD over the concentration ranges tested. The inexpensive (~ 1 $ CAD) microneedle sensors were successfully verified for use in quantification of nitrate, pH, and phosphate in brewed black coffee as a real sample. As such, the microneedle sensors are economical devices and show great promise as robust platforms for PON precision chemical analytics.

Rapid and accurate detection of phosphate in complex biological fluids based on highly improved antenna sensitization of lanthanide luminescence

Rapid and accurate detection of phosphate (Pi) in complex biological fluid is of critical importance for timely warning of Pi accumulation and monitoring Pi related pathological process. Up to date, various luminescent probes have been developed for Pi determination in aqueous media. However, the huge obstacles of the current probes suffer from the inherent issues such as time-consuming, tedious preparation and unavoidable background interference during Pi detection. To circumvent this limitation, we proposed a universal and facile strategy to fabricate a novel sensitizer-Ln³⁺@surfactant micelle probe with time-resolved luminescent (TRL) superiority through the self-assembly of sensitizer, Ln³⁺ and surfactant. Through this design, the sensitizer-Ln³⁺ chelate can be encapsulated into the surfactant constructed micelle and Ln³⁺ luminescence can be substantially lighted up through the effective energy transfer from the coordinated sensitizer and the assistance of Triton X-100. Such high TRL signal can be sensitively and specifically quenched by Pi, which was attributed to the specific coordination competition between sensitizer and Pi towards Ln³⁺. Benefitting from the background-free interference and highly sensitive TRL response of the sensitizer-Ln³⁺@surfactant probe, we achieved the rapid, selective and sensitive detection of Pi in the range of 0.5-120 μM with a limit of detection (LOD) of 0.19 μM. Furthermore, the accuracy of the proposed method based on the Ln³⁺ involved micelle probes was further verified through the quantitation of Pi in real biological samples.

Measurement of Nucleotide Hydrolysis Using Fluorescent Biosensors for Phosphate

Assays for the detection of inorganic phosphate (P_i) are widely used to measure the activity of nucleotide hydrolyzing enzymes, such as ATPases and GTPases. The fluorescent biosensors for P_i, described here, are based on fluorescently labeled versions of E. coli phosphate-binding protein (PBP), which translates P_i binding into a large change in fluorescence intensity. In comparison with other P_i-detection systems, these biosensors are characterized by a high sensitivity (sub-micromolar P_i concentrations) and high time resolution (tens of milliseconds), and they are therefore particularly well suited for measurements of phosphate ester hydrolysis in real time. In this chapter, it is described how the P_i biosensors can be used to measure kinetics of ATPase and GTPase reactions, both under steady state and pre-steady state conditions. An example protocol is given for determining steady state kinetic parameters, K_m and k_cat, of the ATP-dependent chromatin remodeler Chd1, in a plate reader format. In addition, the measurement of P_i release kinetics under pre-steady state conditions is described, including a detailed experimental procedure for a single turnover measurement of ATP hydrolysis by the ABC-type ATPase SufBC using rapid mixing.

Dual-functional lanthanide metal organic frameworks for visual and ultrasensitive ratiometric fluorescent detection of phosphate based on aggregation-induced energy transfer

Phosphate (Pi) not only plays a significant role in physiological processes, but also is an important indicator for aquatic ecosystems. The dual-functional lanthanide metal organic frameworks (MOFs) were synthesized for visual and ultrasensitive ratiometric fluorescent detection of Pi based on aggregation-induced energy transfer. In the MOFs material, ciprofloxacin (CIP) functions as an energy donor and results in the fluorescence enhancement of Eu³⁺; the introduction of pyromellitic acid can cause the aggregation of the CIP-Eu³⁺ complex, and red characteristic fluorescence of Eu³⁺ at 614 nm is further enhanced (about 40 times). When Pi is added to the MOFs solution, CIP is released from the MOFs, red fluorescence of Eu³⁺ is quenched and blue fluorescence of CIP is simultaneously recovered, thereby a ratiometric fluorescent probe for the detection of Pi was fabricated. The fluorescent response based on intermolecular energy transfer of the CIP-Eu³⁺ complex is very sensitive to Pi. The limit of detection (3σ/K) of the probe is ultrasensitive and attains 4.4 nM. The possible interferential substances such as 17 common metal ions and 14 anions investigated do not interfere with the Pi detection. The ratiometric fluorescent probe has been successfully used in the determination of Pi in real human urine and lake water samples. This work may supply a new strategy for fabricating ratiometric fluorescent probe and a prospective application in biological and environmental samples.