Absolute Energy Levels of Liquid Water

Optical and Chemical Measurements of Solvated Electrons Produced in Plasma Electrolysis with a Water Cathode

It is known that glow discharges with a water anode inject and form solvated electrons at the plasma-liquid interface, driving a wide variety of reduction reactions. However, in systems with a water cathode, the production and role of solvated electrons are less clear. Here, we present evidence for the direct detection of solvated electrons produced at the interface of an argon plasma and a water cathode via absorption spectroscopy. We further quantify their yield using the dissociative electron attachment of chloroacetate, measuring a yield of 1.04 ± 0.59 electrons per incident ion, corresponding to approximately 100% faradaic efficiency. Additionally, we estimate a yield of 2.09 ± 0.93 hydroxyl radicals per incident ion. Comparison of this yield with other findings in the literature supports that these hydroxyl radicals are likely formed directly in the liquid phase rather than by diffusion from the vapor phase.

Absolute energy levels of liquid water from many-body perturbation theory with effective vertex corrections

We demonstrate the importance of addressing the Γ vertex and thus going beyond the GW approximation for achieving the energy levels of liquid water in many-body perturbation theory. In particular, we consider an effective vertex function in both the polarizability and the self-energy, which does not produce any computational overhead compared with the GW approximation. We yield the band gap, the ionization potential, and the electron affinity in good agreement with experiment and with a hybrid functional description. The achieved electronic structure and dielectric screening further lead to a good description of the optical absorption spectrum, as obtained through the solution of the Bethe-Salpeter equation. In particular, the experimental peak position of the exciton is accurately reproduced.

Machine Learning Frontier Orbital Energies of Nanodiamonds

Nanodiamonds have a wide range of applications including catalysis, sensing, tribology, and biomedicine. To leverage nanodiamond design via machine learning, we introduce the new data set ND5k, consisting of 5089 diamondoid and nanodiamond structures and their frontier orbital energies. ND5k structures are optimized via tight-binding density functional theory (DFTB) and their frontier orbital energies are computed using density functional theory (DFT) with the PBE0 hybrid functional. From this data set we derive a qualitative design suggestion for nanodiamonds in photocatalysis. We also compare recent machine learning models for predicting frontier orbital energies for similar structures as they have been trained on (interpolation on ND5k), and we test their abilities to extrapolate predictions to larger structures. For both the interpolation and extrapolation task, we find the best performance using the equivariant message passing neural network PaiNN. The second best results are achieved with a message passing neural network using a tailored set of atomic descriptors proposed here.

Many-body screening effects in liquid water

The screening arising from many-body excitations is a crucial quantity for describing absorption and inelastic X-ray scattering (IXS) of materials. Similarly, the electron screening plays a critical role in state-of-the-art approaches for determining the fundamental band gap. However, ab initio studies of the screening in liquid water have remained limited. Here, we use a combined analysis based on the Bethe-Salpeter equation and time-dependent density functional theory. We first show that absorption spectra at near-edge energies are insufficient to assess the accuracy by which the screening is described. Next, when the energy range under scrutiny is extended, we instead find that the IXS spectra are highly sensitive and allow for the selection of the optimal theoretical scheme. This leads to good agreement with experiment over a large range of transferred energies and momenta, and enables establishing the elusive fundamental band gap of liquid water at 9.3 eV.

pH- and Facet-Dependent Surface Chemistry of TiO2 in Aqueous Environment from First Principles

TiO₂ is a relevant catalytic material, and its chemistry in aqueous environment is a challenging aspect to address. Also, the morphology of TiO₂ particles at the nanoscale is often complex, spanning from faceted to spherical. In this work, we study the pH- and facet-dependent surface chemistry of TiO₂/water interfaces by performing ab initio molecular dynamics simulations with the grand canonical formulation of species in solution. We first determined the acid-base equilibrium constants at the interface, which allows us to estimate the pH at the point of zero charge, an important experimental observable. Then, based on simulated equilibrium constants, we predict the amount of H⁺, OH^-, and adsorbed H₂O species present on the surfaces as a function of the pH, a relevant aspect for water splitting semi-reactions. We approximated the complex morphology of TiO₂ particles by considering the rutile (110) and (011), and anatase (101), (001), and (100) surfaces.

Birth of the Hydrated Electron via Charge-Transfer-to-Solvent Excitation of Aqueous Iodide

A primary means to generate hydrated electrons in laboratory experiments is excitation to the charge-transfer-to-solvent (CTTS) state of a solute such as I^-(aq), but this initial step in the genesis of e^-(aq) has never been simulated directly using ab initio molecular dynamics. We report the first such simulations, combining ground- and excited-state simulations of I^-(aq) with a detailed analysis of fluctuations in the Coulomb potential experienced by the nascent solvated electron. What emerges is a two-step picture of the evolution of e^-(aq) starting from the CTTS state: I^-(aq) + hν → I^-*(aq) → I^•(aq) + e^-(aq). Notably, the equilibrated ground state of e^-(aq) evolves from I^-*(aq) without any nonadiabatic transitions, simply as a result of solvent reorganization. The methodology used here should be applicable to other photochemical electron transfer processes in solution, an important class of problems directly relevant to photocatalysis and energy transfer.

First-principles redox energy estimates under the condition of satisfying the general form of Koopmans’ theorem: An atomistic study of aqueous iron

In this work, we explore the relative accuracy to which a hybrid functional, in the context of density functional theory, may predict redox properties under the constraint of satisfying the general form of Koopmans’ theorem. Taking aqueous iron as our model system within the framework of first-principles molecular dynamics, direct comparison between computed single-particle energies and experimental ionization data is assessed by both (1) tuning the degree of hybrid exchange, to satisfy the general form of Koopmans’ theorem, and (2) ensuring the application of finite-size corrections. These finite-size corrections are benchmarked through classical molecular dynamics calculations, extended to large atomic ensembles, for which good convergence is obtained in the large supercell limit. Our first-principles findings indicate that while precise quantitative agreement with experimental ionization data cannot always be attained for solvated systems, when satisfying the general form of Koopmans’ theorem via hybrid functionals, theoretically robust estimates of single-particle redox energies are most often arrived at by employing a total energy difference approach. That is, when seeking to employ a value of exact exchange that does not satisfy the general form of Koopmans’ theorem, but some other physical metric, the single-particle energy estimate that would most closely align with the general form of Koopmans’ theorem is obtained from a total energy difference approach. In this respect, these findings provide important guidance for the more general comparison of redox energies computed via hybrid functionals with experimental data.

Ultrafast proton transfer of the aqueous phenol radical cation

Proton transfer (PT) reactions are fundamental to numerous chemical and biological processes. While sub-picosecond PT involving electronically excited states has been extensively studied, little is known about ultrafast PT triggered by photoionization. Here, we employ femtosecond optical pump-probe spectroscopy and quantum dynamics calculations to investigate the ultrafast proton transfer dynamics of the aqueous phenol radical cation (PhOH˙⁺). Analysis of the vibrational wave packet dynamics reveals unusually short dephasing times of 0.18 ± 0.02 ps and 0.16 ± 0.02 ps for the PhOH˙⁺ O-H wag and bend frequencies, respectively, suggestive of ultrafast PT occurring on the ∼0.1 ps timescale. The reduced potential energy surface obtained from ab initio calculations shows that PT is barrierless when it is coupled to the intermolecular hindered translation between PhOH˙⁺ and the proton-acceptor water molecule. Quantum dynamics calculations yield a lifetime of 193 fs for PhOH˙⁺, in good agreement with the experimental results and consistent with the PT reaction being mediated by the intermolecular O⋯O stretch. These results suggest that photoionization can be harnessed to produce photoacids that undergo ultrafast PT. In addition, they also show that PT can serve as an ultrafast deactivation channel for limiting the oxidative damage potential of radical cations.

Electronic structure of the solvated benzene radical anion

The benzene radical anion is a molecular ion pertinent to several organic reactions, including the Birch reduction of benzene in liquid ammonia. The species exhibits a dynamic Jahn-Teller effect due to its open-shell nature and undergoes pseudorotation of its geometry. Here, we characterize the complex electronic structure of this condensed-phase system based on ab initio molecular dynamics simulations and GW calculations of the benzene radical anion solvated in liquid ammonia. Using detailed analysis of the molecular and electronic structure, we find that the spatial character of the excess electron of the solvated radical anion follows the underlying Jahn-Teller distortions of the molecular geometry. We decompose the electronic density of states to isolate the contribution of the solute and to examine the response of the solvent to its presence. Our findings show the correspondence between instantaneous molecular structure and spin density; provide important insights into the electronic stability of the species, revealing that it is, indeed, a bound state in the condensed phase; and offer electronic densities of states that aid in the interpretation of experimental photoelectron spectra.

Implicit Solvation Methods for Catalysis at Electrified Interfaces

Implicit solvation is an effective, highly coarse-grained approach in atomic-scale simulations to account for a surrounding liquid electrolyte on the level of a continuous polarizable medium. Originating in molecular chemistry with finite solutes, implicit solvation techniques are now increasingly used in the context of first-principles modeling of electrochemistry and electrocatalysis at extended (often metallic) electrodes. The prevalent ansatz to model the latter electrodes and the reactive surface chemistry at them through slabs in periodic boundary condition supercells brings its specific challenges. Foremost this concerns the difficulty of describing the entire double layer forming at the electrified solid–liquid interface (SLI) within supercell sizes tractable by commonly employed density functional theory (DFT). We review liquid solvation methodology from this specific application angle, highlighting in particular its use in the widespread ab initio thermodynamics approach to surface catalysis. Notably, implicit solvation can be employed to mimic a polarization of the electrode’s electronic density under the applied potential and the concomitant capacitive charging of the entire double layer beyond the limitations of the employed DFT supercell. Most critical for continuing advances of this effective methodology for the SLI context is the lack of pertinent (experimental or high-level theoretical) reference data needed for parametrization.

Static and dynamic water structures at interfaces: A case study with focus on Pt(111)

An accurate atomistic treatment of aqueous solid-liquid interfaces necessitates the explicit description of interfacial water ideally via ab initio molecular dynamics simulations. Many applications, however, still rely on static interfacial water models, e.g., for the computation of (electro)chemical reaction barriers and focus on a single, prototypical structure. In this work, we systematically study the relation between density functional theory-derived static and dynamic interfacial water models with specific focus on the water-Pt(111) interface. We first introduce a general construction protocol for static 2D water layers on any substrate, which we apply to the low index surfaces of Pt. Subsequently, we compare these with structures from a broad selection of reference works based on the Smooth Overlap of Atomic Positions descriptor. The analysis reveals some structural overlap between static and dynamic water ensembles; however, static structures tend to overemphasize the in-plane hydrogen bonding network. This feature is especially pronounced for the widely used low-temperature hexagonal ice-like structure. In addition, a complex relation between structure, work function, and adsorption energy is observed, which suggests that the concentration on single, static water models might introduce systematic biases that are likely reduced by averaging over consistently created structural ensembles, as introduced here.

Observation of intra- and intermolecular vibrational coherences of the aqueous tryptophan radical induced by photodetachment

The study of the photodetachment of amino acids in aqueous solution is pertinent to the understanding of elementary processes that follow the interaction of ionizing radiation with biological matter. In the case of tryptophan, the tryptophan radical that is produced by electron ejection also plays an important role in numerous redox reactions in biology, although studies of its ultrafast molecular dynamics are limited. Here, we employ femtosecond optical pump-probe spectroscopy to elucidate the ultrafast structural rearrangement dynamics that accompany the photodetachment of the aqueous tryptophan anion by intense, ∼5-fs laser pulses. The observed vibrational wave packet dynamics, in conjunction with density functional theory calculations, identify the vibrational modes of the tryptophan radical, which participate in structural rearrangement upon photodetachment. Aside from intramolecular vibrational modes, our results also point to the involvement of intermolecular modes that drive solvent reorganization about the N-H moiety of the indole sidechain. Our study offers new insight into the ultrafast molecular dynamics of ionized biomolecules and suggests that the present experimental approach can be extended to investigate the photoionization- or photodetachment-induced structural dynamics of larger biomolecules.

Ultrafast vibrational wave packet dynamics of the aqueous tyrosyl radical anion induced by photodetachment

The ultrafast dynamics triggered by the photodetachment of the tyrosinate dianion in aqueous environment shed light on the elementary processes that accompany the interaction of ionizing radiation with biological matter. Photodetachment of the tryosinate dianion yields the tyrosyl radical anion, an important intermediate in biological redox reactions, although the study of its ultrafast dynamics is limited. Here, we utilize femtosecond optical pump-probe spectroscopy to investigate the ultrafast structural reorganization dynamics that follow the photodetachment of the tyrosinate dianion in aqueous solution. Photodetachment of the tyrosinate dianion leads to vibrational wave packet motion along seven vibrational modes that are coupled to the photodetachment process. The vibrational modes are assigned with the aid of density functional theory (DFT) calculations. Our results offer a glimpse of the elementary dynamics of ionized biomolecules and suggest the possibility of extending this approach to investigate the ionization-induced structural rearrangement of other aromatic amino acids and larger biomolecules.

The Fermi level as an energy reference in liquid jet X-ray photoelectron spectroscopy studies of aqueous solutions

To advance the understanding of key electrochemical and photocatalytic processes that depend on the electronic structure of aqueous solutions, X-ray photoemission spectroscopy has become an invaluable tool, especially when practiced with liquid microjet setups. Determining vertical ionization energies referenced to the vacuum level, and binding energies referenced to the Fermi level, including the much-coveted reorganization energy of the oxidized species of a redox couple, requires that energy levels be properly defined. The present paper addresses specifically how the vacuum level "just outside the surface" can be known through the energy position of the rising edge of the secondary electrons, and how the Fermi level reference is uniquely determined via the introduction of a redox couple. Taking the case of the ferricyanide/ferrocyanide and ferric/ferrous couples, this study also tackles issues related to the electrokinetic effects inherent to the production of a liquid jet in a vacuum, which has become the standard water sample environment for photoemission experiments.

Probing Interfacial Effects on Ionization Energies: The Surprising Banality of Anion-Water Hydrogen Bonding at the Air/Water Interface

Liquid microjet photoelectron spectroscopy is an increasingly common technique to measure vertical ionization energies (VIEs) of aqueous solutes, but the interpretation of these experiments is subject to questions regarding sensitivity to bulk versus interfacial solvation environments. We have computed aqueous-phase VIEs for a set of inorganic anions, using a combination of molecular dynamics simulations and electronic structure calculations, with results that are in excellent agreement with experiment regardless of whether the simulation data are restricted to ions at the air/water interface or to those in bulk aqueous solution. Although the computed VIEs are sensitive to ion-water hydrogen bonding, we find that the short-range solvation structure is sufficiently similar in both environments that it proves impossible to discriminate between the two on the basis of the VIE, a conclusion that has important implications for the interpretation of liquid-phase photoelectron spectroscopy. More generally, analysis of the simulation data suggests that the surface activity of soft anions is largely a second or third solvation shell effect, arising from disruption of water-water hydrogen bonds and not from significant changes in first-shell anion-water hydrogen bonding.

Natural Charge-Transfer Analysis: Eliminating Spurious Charge-Transfer States in Time-Dependent Density Functional Theory via Diabatization, with Application to Projection-Based Embedding

For many types of vertical excitation energies, linear-response time-dependent density functional theory (LR-TDDFT) offers a useful degree of accuracy combined with unrivaled computational efficiency, although charge-transfer excitation energies are often systematically and dramatically underestimated, especially for large systems and those that contain explicit solvent. As a result, low-energy electronic spectra of solution-phase chromophores often contain tens to hundreds of spurious charge-transfer states, making LR-TDDFT needlessly expensive in bulk solution. Intensity borrowing by these spurious states can affect intensities of the valence excitations, altering electronic bandshapes. At higher excitation energies, it is difficult to distinguish spurious charge-transfer states from genuine charge-transfer-to-solvent (CTTS) excitations. In this work, we introduce an automated diabatization that enables fast and effective screening of the CTTS acceptor space in bulk solution. Our procedure introduces "natural charge-transfer orbitals" that provide a means to isolate orbitals that are most likely to participate in a CTTS excitation. Projection of these orbitals onto solvent-centered virtual orbitals provides a criterion for defining the most important solvent molecules in a given excitation and be used as an automated subspace selection algorithm for projection-based embedding of a high-level description of the CTTS state in a lower-level description of its environment. We apply this method to an ab initio molecular dynamics trajectory of I^-(aq) and report the lowest-energy CTTS band in the absorption spectrum. Our results are in excellent agreement with the experiment, and only one-third of the water molecules in the I^-(H₂O)₉₆ simulation cell need to be described with LR-TDDFT to obtain excitation energies that are converged to <0.1 eV. The tools introduced herein will improve the accuracy, efficiency, and usability of LR-TDDFT in solution-phase environments.

Molecular Dynamics Characterization of Dielectron Hydration in Liquid Water with Unique Double Proton Transfers

Radiation chemistry of water and aqueous solutions has always been an interesting scientific issue owing to involving electronic excitations, ionization of solvated species, and formation of radiolytic species and many elementary reactions, but the underlying mechanisms are still poorly understood. Here, we for the first time molecular dynamics characterize the hydration dynamics of two correlated electrons and their triggered unique phenomena in liquid water associated with radiolysis of water using the combined hybrid functional and nonlocal dispersion functional. Hydration of two electrons may experience two distinctly different mechanisms, one forming a spin-paired closed-shell unicaged dielectron hydrate (e₂^2-_aq) and the other forming a spin-paired metastable open-shell bicaged hydrated electron pair (e^-_aq···e^-_aq) which exhibits intriguing antiferromagnetic spin coupling dynamics (in a range of -40 cm^-1 to -500 cm^-1). e^-_aq···e^-_aq can recombine to e₂^2-_aq through a unique solvent fluctuation-controlled gradual-flowing mechanism, and enlarging fluctuation can promote the conversion. Interestingly, we directly observe that e₂^2-_aq as the precursor can trigger hydrogen evolution via unique continuous spontaneous double proton transfer to the dielectron with a short-lived H^-_aq intermediate, but e^-_aq···e^-_aq does not directly. This is the first direct observation for the connection between e₂^2-_aq and spontaneous hydrogen evolution including participation of H^-_aq in aqueous solution, bridging relevant experimental phenomena. This work also evidences an unnoticed process, the double proton transfer mediated charge separation, and presents the first detailed analysis regarding the evolution dynamics of e₂^2-_aq for the understanding of the radiolysis reactions in aqueous solutions.

Water-Stable DMASnBr3 Lead-Free Perovskite for Effective Solar-Driven Photocatalysis

Water-stable metal halide perovskites could foster tremendous progresses in several research fields where their superior optical properties can make differences. In this work we report clear evidence of water stability in a lead-free metal halide perovskite, namely DMASnBr₃ , obtained by means of diffraction, optical and X-ray photoelectron spectroscopy. Such unprecedented water-stability has been applied to promote photocatalysis in aqueous medium, in particular by devising a novel composite material by coupling DMASnBr₃ to g-C₃ N₄ , taking advantage from the combination of their optimal photophysical properties. The prepared composites provide an impressive hydrogen evolution rate >1700 μmol g^-1  h^-1 generated by the synergistic activity of the two composite costituents. DFT calculations provide insight into this enhancement deriving it from the favorable alignment of interfacial energy levels of DMASnBr₃ and g-C₃ N₄ . The demonstration of an efficient photocatalytic activity for a composite based on lead-free metal halide perovskite in water paves the way to a new class of light-driven catalysts working in aqueous environments.

Combined Computational and Experimental Investigation on the Nature of Hydrated Iodoplumbate Complexes: Insights into the Dual Role of Water in Perovskite Precursor Solutions

Water is generally considered an enemy of metal halide perovskites, being responsible for their rapid degradation and, consequently, undermining the long-term stability of perovskite-based solar cells. However, beneficial effects of liquid water have been surprisingly observed, and synthetic routes including water treatments have shown to improve the quality of perovskite films. This suggests that the interactions of water with perovskites and their precursors are far from being completely understood, as water appears to play a puzzling dual role in perovskite precursor solutions. In this context, studying the basic interactions between perovskite precursors in the aqueous environment can provide a deeper comprehension of this conundrum. In this context, it is fundamental to understand how water impacts the chemistry of iodoplumbate perovskite precursor species, PbI_x^2–x. Here, we investigate the chemistry of these complexes using a combined experimental and theoretical strategy to unveil their peculiar structural and optical properties and eventually to assign the species present in the solution. Our study indicates that iodide-rich iodoplumbates, which are generally key to the formation of lead halide perovskites, are not easily formed in aqueous solutions because of the competition between iodide and solvent molecules in coordinating Pb²⁺ ions, explaining the difficulty of depositing lead iodide perovskites from aqueous solutions. We postulate that the beneficial effect of water when used as an additive is then motivated by its behavior being similar to high coordinative polar aprotic solvents usually employed as additives in one-step perovskite depositions.

Below Band Gap Formation of Solvated Electrons in Neutral Water Clusters?

Below band gap formation of solvated electrons in neutral water clusters using pump-probe photoelectron imaging is compared with recent data for liquid water and with above band gap excitation studies in liquid and clusters. Similar relaxation times on the order of 200 fs and 1-2 ps are retrieved for below and above band gap excitation, in both clusters and liquid. The independence of the relaxation times from the generation process indicates that these times are dominated by the solvent response, which is significantly slower than the various solvated electron formation processes. The analysis of the temporal evolution of the vertical electron binding energy and the electron binding energy at half-maximum suggests a dependence of the solvation time on the binding energy.

Chemical Analysis of Secondary Electron Emission from a Water Cathode at the Interface with a Nonthermal Plasma

When a nonthermal plasma and a liquid form part of the same circuit, the liquid may function as a cathode, in which case electrons are emitted from the liquid into the gas to sustain the plasma. As opposed to solid electrodes, the mechanism of this emission has not been established for a liquid, even though various theories have attempted to explain it via chemical processes in the liquid phase. In this work, we tested the effects of the interfacial chemistry on electron emission from water, including the role of pH as well as the hydroxyl radical, the hydrogen atom, the solvated electron, and the presolvated electron; it was found that none of these species are critical to sustain the plasma. We propose an emission mechanism where electrons, generated from ionized water molecules in the uppermost monolayers of solution, are emitted into the plasma directly from the conduction band of the water.

Strong Hole Trapping Due to Oxygen Dimers in BiVO4: Effect on the Water Oxidation Reaction

We present a study of hole bipolarons in BiVO₄. We show that in the presence of two holes O-O dimers are formed, leading to strong charge trapping. While the formation of bipolarons in bulk BiVO₄ requires overcoming a kinetic barrier, we find that these defects should be spontaneously formed at the surface of the material and its interface with water. Through molecular dynamics simulations, we study the effect of bipolarons on the water-splitting reaction and show that their presence may be especially beneficial in alkaline conditions.

pH-Dependent Distribution of Functional Groups on Titanium-Based MXenes

MXenes are a new rapidly developing class of two-dimensional materials with suitable properties for a broad range of applications. It has been shown that during synthesis of these materials the surfaces are usually functionalized by O, OH, and F and further suggested that controlling the surface allows controlling the material properties. However, a proper understanding of the surface structure is still missing, with a significant discrepancy between computational and experimental studies. Experiments consistently show formation of surfaces with mixed terminations, whereas computational studies point toward pure terminated surfaces. Here, we explain the formation of mixed functionalization on the surface of titanium-based two-dimensional carbides, Ti2C and Ti3C2, using a multiscale modeling scheme. Our scheme is based on calculating Gibbs free energy of formation by a combination of electronic structure calculations with cluster expansion and Monte Carlo simulations. Our calculations show formation of mixtures of O, OH, and F on the surface with the composition depending on pH, temperature, and the work function. On the other hand, our results also suggest a limited stable range of compositions, which challenges the paradigm of a high tunability of MXene properties.

Binding energy of solvated electrons and retrieval of true UV photoelectron spectra of liquids

The electronic energy and dynamics of solvated electrons, the simplest yet elusive chemical species, is of interest in chemistry, physics, and biology. Here, we present the electron binding energy distributions of solvated electrons in liquid water, methanol, and ethanol accurately measured using extreme ultraviolet (EUV) photoelectron spectroscopy of liquids with a single-order high harmonic. The distributions are Gaussian in all cases. Using the EUV and UV photoelectron spectra of solvated electrons, we succeeded in retrieving sharp electron kinetic energy distributions from the spectra broadened and energy shifted by inelastic scattering in liquids, overcoming an obstacle in ultrafast UV photoelectron spectroscopy of liquids. The method is demonstrated for the benchmark systems of charge transfer to solvent reaction and ultrafast internal conversion of hydrated electron from the first excited state.

Picture of the wet electron: a localized transient state in liquid water

A transient state of the excess electron in liquid water preceding the development of the solvation shell, the so-called wet electron, has been invoked to explain spectroscopic observations, but its binding energy and atomic structure have remained highly elusive. Here, we carry out hybrid functional molecular dynamics to unveil the ultrafast solvation mechanism leading to the hydrated electron. In the pre-hydrated regime, the electron is found to repeatedly switch between a quasi-free electron state in the conduction band and a localized state with a binding energy of 0.26 eV, which we assign to the wet electron. This transient state self-traps in a region of the liquid which extends up to ∼4.5 Å and involves a severe disruption of the hydrogen-bond network. Our picture provides an unprecedented view on the nature of the wet electron, which is instrumental to understanding the properties of this fundamental species in liquid water.

Valence and Core-Level X-ray Photoelectron Spectroscopy of a Liquid Ammonia Microjet

Photoelectron spectroscopy of microjets expanded into vacuum allows access to orbital energies for solute or solvent molecules in the liquid phase. Microjets of water, acetonitrile and alcohols have previously been studied; however, it has been unclear whether jets of low temperature molecular solvents could be realized. Here we demonstrate a stable 20 μm jet of liquid ammonia (-60 °C) in a vacuum, which we use to record both valence and core-level band photoelectron spectra using soft X-ray synchrotron radiation. Significant shifts from isolated ammonia in the gas-phase are observed, as is the liquid-phase photoelectron angular anisotropy. Comparisons with spectra of ammonia in clusters and the solid phase, as well as spectra for water in various phases potentially reveal how hydrogen bonding is reflected in the condensed phase electronic structure.

Structure of the aqueous electron

A cavity or excluded-volume structure best explains the experimental properties of the aqueous or “hydrated” electron.

Reactivity and energy level of a localized hole in liquid water

Reaction and redox level of hole capture in liquid water from first principles.